We accomplished a bunch of random small tasks. - I received a cedar log from a relative to use on our sawmill - Jamie took the Mule side by side into the woods to get dead leaves to add to next year's garden location - I milled a large pine log on the sawmill and sticker stacked it - Update on my DIY four wheeler mud flap install - Update on my dovetailed chainsaw chest - We ran a bunch of sawmill offcuts through our woodchipper
JK Boots: Hands down, without question, the best outdoor working boot that I have ever tried. They aren't cheap and they aren't inexpensive. The break-in period was brutal for me. But after some boot oil and a few working days for them to conform to my feet, I've never worked in anything as form fitting and comfortable.
My Lineup: - O.T. Bison Canyon for everyday work - Superduty Bison Shadow Roughout Smooth for earth work days - The Buck Indigo Chocolate square toe western for days where quick on and off are valued USE THE CODE jaybates TO GET $75 OFF on purchases of $200 or more! https://www.jkboots.com/products/o-t-bison-rust-roughout-smooth?bg_ref=BwlWA71DVt
PPO3 is supported by Timber King
sawmills. For more information on my
1220 CRZ mill or one of many fully
hydraulic options, go to timberking.com.
[Music]
finisher.
[Music]
Flawless victory.
[Music]
All right, I just got a free cedar log
from a relative 16 ft trailer. So, I
didn't measure how long it is, but uh 16
ft. And I don't know how much of this is
usable usable up here. And then about
that much down at the bottom section
over here is kind of not all there. It
looks like it split when it was felled.
So, we're missing a little bit,
but uh
that's a pretty big
pretty big chunk of usable material
right here. little bit punky right here.
So, I don't know how long this goes in.
And you know what? I'm relatively new to
the whole sawmill world. So, some people
may say that is just treasure. Some
people may say that is not worth my
time. But you know what? I don't have
experience with stuff like this, these
random logs. So, I'm going to throw it
up there, maximize my yield the best of
that I can, and educate myself and use
this tree as experience so I know
better. I not know better, but know a
little bit better as to what I say yes
and no to in the future. This is really
gnarly up here. Um, I don't know what
I'll even do with it, to be honest with
you.
But regardless,
uh oh, my tag goes out this month. Got
to get new registration on the tag this
on the trailer this month. Okay. Um
either way, I'll have some usable
material in there and it'll be fun.
Uh not right now though. I've got to get
that log mil up first.
While on the trail with Jay the other
day, I noticed that a lot of our trails
have tons of last year's leaves just
great. That's a grace. Go on, Grace.
Come on, Grace. While on the trail the
other day with Jay, I noticed that a lot
of last year's leaves have started
decaying and are just they're still
here. So, I'm going to break all these
up today and put them in my new garden
area and let this hopefully just build
up some soil over the winter so that
next uh next spring when it comes time
to start planting the garden, hopefully
I'll have some good soil.
Looks like Jamie's going to unexpectedly
get rained on. She left with the GoPro
and the mule. I don't know what she's
doing. Uh but it's raining now.
Unexpectedly. Wasn't supposed to rain.
We just got back with a huge cedar tree,
huge cedar log that I want to mill up,
but I've got another big log already
sitting here. So, I guess it's uh time
to run the sawmill.
Well, it's supposed to rain tomorrow,
not today. Well, you can't really tell
it, but it's raining out here. The
canopy kind of got me dry, but I think
I'm going to call it quits.
Um,
just because I can hear it getting
heavier and so maybe it'll stop in a
minute and we can get back out here.
[Music]
[Music]
Heat. Hey, Heat.
[Music]
Heat. Heat.
[Music]
[Applause]
[Music]
Heat.
[Music]
Heat.
[Music]
[Applause]
[Music]
[Applause]
Heat up
here.
[Music]
[Applause]
So, I started with this row that had
just one board on it. And I put this bag
here to remind myself. One board on this
row, ended up with one board on this
row. That means I milled three
consecutive rows or three full rows.
It's a 42-in wide pallet. Let's just
subtract 2 in for the gap. That's being
a little bit more conservative. Uh,
these are longer than 8 ft, but let's
just take into consideration 8 ft for
the math. That means those three rows I
milled 80 board feet of lumber. 80 board
feet of pine. Uh, sell it for a dollar a
board foot. Green. Well, that's 80 bucks
an hour. We're just throwing numbers out
here, right? 80 bucks an hour. Well, it
took me 1 hour to mill that, right? 80
bucks an hour. It took me 2 hours total
to mill it, plus mill a bunch of other
small stuff that I already had, knocking
it down smaller to get into the wood
chipper, and then clean it all up. So,
two hours invested
if you want to take that $80 of of
goods. Well, that's 40 bucks an hour,
assuming there's nothing in the logs,
right? Anyway, that's a few numbers for
you to ponder as far as how this system
is working out for me. I have a lot of
material that's just junk for one reason
or another. It's just junk. It's either
got so much bow or twist in it that I
don't want to use it or it has too many
bug holes and knots in it or it's got
some delamination of the rings.
So, all of this is even that pretty one
right there. Oo, that's a pretty one on
the outside. But anyway, it's on here
for one reason or another. So, all of
this is sized to go through the wood
chipper. Now that we have the wood
chipper reliable, it is exciting to be
able to focus on two products from the
sawmill. Primarily lumber, beams and
lumber, and secondarily wood chips.
We're going to get a lot of wood chips,
and we use we have so many uses for wood
chips here on the property. And of
course, the sawdust. We're using the
sawdust in various different areas. so
far. The uh compost being one of them.
All right. Uh this is all interesting.
Something else that's interesting is is
the workflow in here. I've started to
develop a little bit of workflow and
things are needing tweaking once again.
Not majorly. Like the orientation of
everything works out. It's just the
location that I want to change. All
right. All right. If I walk out here in
the sun a little bit, we might be able
to see what I'm talking about a little
better. But this is a 60 ft long leanto.
So there's three 20ft bays. I'm calling
them bays. Right. Currently the sawmill
is in the middle. And what I'm finding
is I like to as soon as I'm done with
the cut, leave the head over there, the
saw head over there, and take the
material that way. That's just the
workflow that I seem to like quite a
bit. And I don't really care for taking
the material onto that side at all, just
as far as ergonomics working with the
sawmill. So, I think it makes a lot of
sense to to basically keep everything
that I have, but shift things around
just a little bit. The sawmill I want to
put right there. Same orientation and
everything. Just slide it down. And
also, these these um beams that I've got
my material stacked on, they're working
out great, but I don't think I need
three of them. I don't think I need
three at all. Matter of fact, I also
don't want any of them to going
perpendicular to the length. I thought
this would be all all right over here on
the end. And it kind of sort of is, but
it kind of gives you a pinch point over
there trying to get out of the lean to,
and I don't like that at all. So, move
the sawmill down right here.
Uh, get rid of one of the the beam
stations and put both of the beam
stations that are left right in the
middle. I think that's what I'm going to
go with. And that'll allow me a little
bit more working room here in the middle
area uh to process the already cut
lumber and then also focus on making an
outdoor miter saw station on that back
wall. I think the Leanto is going to get
an outdoor miter saw station before the
inside of the shop gets an indoor miter
saw station. And what I want to
accomplish with this miter saw station
is obviously a cross cutting miter saw,
but I also want to have, if possible, if
I can figure this out, put a small
contractor table saw in one end of it.
That way I can rip small stuff. I'm I'm
not talking about big things like sheet
goods or whatever. Just rip some small
stuff as needed, but also I'd like to
have some type of homemade track system.
Um, I I don't know how long I could make
it, but basically a straight line rip
station to where I I saw it on an old I
believe it was a Shipwright channel if
that name's ringing a bell here. Uh, but
it was a ship building YouTube channel
to where he basically had a a homemade
circular saw track that folded up
against the wall and you put your board
down and then that track folds down and
then you use your circular saw to cut a
straight edge. Flip it up. Move your
material. New material in. Flip that
track down. Something like that I'd like
to incorporate out here. So, a flip down
essentially homemade track saw setup, a
miter saw setup for cross cutting, and a
contractor saw setup for small ripping
jobs. I think those three things would
turn this whole wall into an extremely
functional space. And of course, if I'm
going to do that, it's going to be quite
long to accommodate all three of those
stations. And that leaves a lot of
opportunity for storage down below to
organize this quite a bit and possibly
storage above. I don't know. But that's
where my brain is on this uh this idea.
We need to start a segment called Where
is Ray sleeping today?
Sound asleep.
Oh, he's wiggling.
He senses the camera every time.
Where's Mr. Ray? Grace
does live a tough life.
Woke up with a bad headache. I've been
getting a lot of headaches lately. And
uh anywh who, got a lot to do. So, I'm
moving around. Uh, I don't want to do
anything that requires a lot of mental
input.
So, I'm going to hook up the the uh wood
chipper to the tractor here in a few
minutes and get a bunch of offcuts
chipped up into a usable product for us,
a usable resource for us. But before I
do that, I want to give you an update on
a couple things inside the shop. A lot
of people mentioned that having the
sawmill close to the shop, I'm going to
track in a bunch of dust,
sawdust, and that's going to be
annoying. Well, sawdust has nothing on
the actual
dust that is on everything here here in
the shop. Everything is just in a
blanket.
I need to put old Glory back up.
Noted. Okay. Everything is it just
blanketed with with dust primarily from
the clearing. You know, we had a real
bad drought. Everything stirs up a
little bit of dust and it just blows
into the shop. Not the end of the world.
It's just a uh it's just a fact. We live
a dusty life now. Uh that fan was on
this pile of lumber. Has been for a
while. And it's not quite dry enough to
where I feel comfortable putting it up
on the wall. because once it's up on the
wall, the back side is, you know, it's
going to be on a wall like this. So, the
back side's not really going to be
exposed to wind or anything like that.
So, I don't want it to mold on the back.
Uh, but um once this dries out a little
bit more to the touch, then I'll put it
up on the walls. That'll be a fun inside
project. That is a mud flap off of a big
rig 18-wheeler from a relative of mine
is a diesel mechanic and he got me a
bunch of pull-offs. Well, I chose to use
the thinner thinner one and split it
right down the middle. And that was a
perfect width to go right here. This
this four-wheeler is from 1998, so I'm
not too worried about keeping the
plastics absolutely perfect. But I was
able to bolt through in a couple
locations up here, get this bent
somewhat kind of sort of good. This is
some tough stuff, but still flexible.
And then I bolted it again to the bottom
of the plastics over here. And then
bolted it to this metal support bar
right there. And may not look super
super awesome, but
it's very very functional. I already
went on a trail ride with the dogs just
to test it out and um this is great.
Nothing hits my feet at all.
The chainsaw box is working out great.
It's one of those things that no news is
good news. Well, no news. It's just
doing what it's supposed to do. No
problems. That's great. I need to figure
out a pole to go in the front. This is
just a section of PVC pipe that I just
uh I zip tied up here and then I clamped
it down here with a U-bolt.
And if anyone has been trail riding in
the woods, you'll know that uh the
biggest thing that you have to encounter
if you're the lead guy is spiderw webs.
Spiderwebs, spiderw webs, spiderw webs,
spiderw webs. I need something up front,
a little bit more longlasting than a
piece of PVC uh to get all these spiderw
webs. When I got back, we went on a
small trail ride. Just hit one corner of
the property and came back yesterday uh
just mainly to test out the mud flaps.
When I did that, we had eight spiders on
this pole and I forgot about it. I was
like, "Oh man, eight spiders. Okay,
whatever." And then I went and did
something else. Well, when I came back,
one of the spiders turned this into a
web right here. And then three spiders
webbed out in between the Jeep and the
four-wheeler. So, a good old spiders.
Heat.
[Music]
Heat.
[Music]
[Music]
Heat. Heat.
Heat.
That's all the wood chipping we can do
for two reasons. Number one, I'm out of
diesel. I've got to go get some more
diesel fuel. Number two, I'm actually
out of stuff to chip. All this stuff is
too wide.
Uh, and all that stuff is too dried out
and hard like a rock already. So, I
think I'm going to cut my losses on
those and put them in the burn pile
because I've those were all during the
process of figuring out this system. And
this system is this thing shines if I
use smaller diameter stuff. Um, so all
of my slabs and and off cuts and all
that stuff is going to be much smaller
going forward. Something else that I'm
doing is uh I'm trying to optimize the
best possible lumber off of this. Now,
previously I was just trying to maximize
yield. Now I'm trying to maximize
quality. So anything that I've cut
previously that I'm noticing that is
starting to twist, bend, I'm I'm not
emotionally attached to it. It's not
going to be waste. I'm not going to
throw it in the fire pit, but anything
that's got a twist, like half of that
stuff over there, if it's not already
sized to to go in there, it's coming
back on the mill to rip it down and then
we'll we'll chip it because we're not
wasting it. This is this is a good
usable material, good usable resource
for us that we're really excited about.
The chipper seems to be chipping just
fine when the material gets through
there. And I keep finding the weakest
link and and and hitting that obstacle
or that that hurdle and going on to the
next one. The current weakest link is
now friction on the bed of the intake
shootute. What happens is because this
lip is right here. I I don't know if
it's entirely because of this, but this
lip is a good half inch above this. So,
as it gets fed in there, it essentially
the roller pushes it down and kind of
bows the material because it it contacts
right here and then it contacts below
those um those uh vinyl flaps right
there. Uh, so it's it's bending down and
pushing down so much on the bed up there
that when that bottom part of the bed
gets dry or if the top piece of the
material that we're pushing through has
got dust on it or it doesn't have a lot
of traction, the roller just spins. So
the infeed roller is now the weakest
link on this setup. And the way I'm
getting around it now is I've got a jug
of WD40, one of these little pressurized
spray cans. We I use a lot of WD40. And
I'm spraying down the bed right there uh
or the uh bottom of the intake shoot.
And that works for four or five boards,
but got to figure out something
different. Um an idea that I don't know
if I'll be able to incorporate or not.
Uh, it's definitely an idea is to use a
piece of cardboard to figure out the
entire shape of the bottom of this
intake and cut that out on some uh, what
is it? Uh HMW,
UHMW, ultra high molecular weight
material. That real slippery stuff that
is used, you know, commonly as uh,
runners on a table saw sled or something
like that. If I can get a piece that can
fit inside there and then hook on this
lip to where it won't go in. Well, of
course, it's going to be wedged right
here. It's not going to go any further
than that, that would greatly reduce the
friction on the bottom surface, which
would increase the effectiveness of the
roller.
Um, and this is kind of sort of a a
common thing that I found online with
this chipper is well with this style
chipper. It's not just this one. Is you
end up getting eventually over time uh
due to sap buildup and all kinds of
other stuff. More friction on the bottom
than what the uh roller can overcome.
And it the roller just sits there and
spins on top of the wood and uh you
don't get anywhere. So then you got to
fight with it. And uh that's no fun.
It's only when I turn the camera on that
you guys eat grass. It's like you just
guys you just want to display something.
It's so strange. You don't eat grass any
other time. But when I put the cam put
the camera on and I wasn't even looking
at you guys.
Mr. Nollie talked about you so you
started walking away. Okay, I'll come
back and eat some more grass for you.
Daddy, what is this?
What is it? Yeah. Gracie, where's your
stick?
So, if that doesn't say we're best buds,
I don't know what does.
Nollie will play so hard with this cat.
Like, the cat's entire head is inside
Nollie's mouth sometimes and then the
whole cat's face and head is completely
soaked. And we're like, nollie, bud,
dude. like don't eat the cat, right? And
then you you look over and you see this,
you know,
it's their world. We're just living in
it. He's drooling.
He's drooling.
Oh, he must be sleeping pretty good.
They all are.
Grace is on your your stool face. And
then Scooter's inside just barking up a
storm because he's not involved. And
then we get him out here and he's like,
I am so domesticated. I need to be
inside the camper where there's air
conditioning.
He's he's changed so much.
He has changed so much.
Boogie down at the bar
[Music]
and homemade boos, but it always goes
too far.
Shooting pool cracker jack now and don't
look back. But hey,
don't you want to play?
[Music]
Hold on, sugar. Why you look so sad?
Come on now, mama. Ain't nothing here so
bad. You got fast