We got so busy before our daughter's birthday party that I had to pause editing. That said, we weathered the storm, the party has passed, and we're back to our normal pace. This feels like forever ago, but I received a free cedar log from a relative. On day 519, I cut it open to see how much I could salvage.
JK Boots: Hands down, without question, the best outdoor working boot that I have ever tried. They aren't cheap and they aren't inexpensive. The break-in period was brutal for me. But after some boot oil and a few working days for them to conform to my feet, I've never worked in anything as form fitting and comfortable.
My Lineup: - O.T. Bison Canyon for everyday work - Superduty Bison Shadow Roughout Smooth for earth work days - The Buck Indigo Chocolate square toe western for days where quick on and off are valued USE THE CODE jaybates TO GET $75 OFF on purchases of $200 or more! https://www.jkboots.com/products/o-t-bison-rust-roughout-smooth?bg_ref=BwlWA71DVt
PPO3 is supported by Timberking
sawmills. For more information on my
1220 CRZ mill or one of many fully
hydraulic options, go to timberking.com.
My two favorite ladies in the whole wide
world are having a lazy day today. They
both feel sick, feel um body aches and
whatnot. I've got this sinus crud going
on. I got my deep berry white boys
going. Um and I've been battling some
low energy the past couple days, but
I've got a lot to do. So, I'm going to
keep pushing on. Starting with this log
today. I kind of sort of don't know
where to begin. This side is all gnarly,
right? Obviously, and this side's got a
big split down the trunk up until right
about here.
So, I think I'm going to cut it right
here and then put both sides on the mill
and cut off the extra with the chainsaw
and uh see just see what I can get out
of this thing. Hopefully, I don't hit
any metal. Uh, a couple things to worry
about is there's poison ivy wrapped all
the way around there. Yay.
And um I don't want to cut it on the
trailer because I've made that mistake
once in like 2019 or so, something like
that. And I told myself I'm not going to
cut anything on this trailer again.
These deck boards are originally from
2016 and they're still doing the job.
So, I don't want to cut them up. I think
I think the plan of attack is to put the
grapple back on the tractor, grab that
side, pull it off of the trailer, cut it
on the ground, then I can put to each
side up on the mill and have a pretty
interesting educational
educational sawmill day. Sounds like a
plan, huh?
Heat up
here.
Heat.
Heat.
Heat. Heat.
Heat
up
here.
Heat
up here.
Heat. Heat.
[Applause]
Heat. Heat.
[Music]
[Laughter]
[Music]
Heat up here.
Heat.
Heat.
Heat.
[Music]
Heat.
[Music]
Heat. Heat.
Heat.
Heat.
[Music]
[Music]
[Applause]
Heat up here.
[Music]
Heat. Heat.
[Music]
Heat
up here.
Heat. Heat.
I have no clue how much usable material
I'm going to be able to get out of here.
This split
goes quite a way.
Of course, got all kinds of other stuff
going on right there. Not too sure. And
of course, the elephant in the room, the
big split on top. What's interesting is
like it's kind of like an optical
illusion saying like, "Oh man, you got
to raise this side up considerably." But
in reality,
uh, that's the butt section and this is
going up the tree. The center axis
actually needs to be lifted by a/ inch
on this side according to that side over
there. But, uh, I don't think I'm going
to do that. Uh, and that's because I
don't care if these are sawing a little
bit off axes axis. I just want this to
have maximum yield because I'm going to
be using this to make birdhouses for my
daughter's birthday party. So, this is
not like fine furniture material, right?
This is more or less a fun learning
experiment.
And
good.
I tell you what, if you ever find
yourself out in the middle of nowhere,
happen to have yourself a 3-ft high pile
of wood chips and a tractor with a
grapple where you can very precisely
place your logs on top of said wood
chips, you can go ahead and cut right
through there and have no risk
whatsoever of burying your saw into
dirt.
[Music]
[Music]
[Music]
All right, I'm looking for some advice
from fellow sawers here. When do you
replace the blades? I I think I could
probably stretch all of my blades out
just a little bit longer and keep
cutting with them just a little bit
longer. But once they feel like once
they kind of feel like they're getting
dull as far as performance cutting
through the wood, uh, I swap them out.
And I haven't had one break on me. Um,
but I think I think I can probably
stretch them just a little bit longer.
I'm not getting any bad cuts or
anything. And these these still feel
super sharp. They really do. So, am I
doing the right thing by as soon as it
feels like it's starting to get dull as
far as performance goes, take it off, or
at that point, can I just slow down a
little bit and maybe get, you know, one
more log out of the out of the uh life
of the blade? I don't know. I think I'm
on the right track right now of just
pulling them off when it feels dull as
far as performance, but part of me
thinks that uh I'm prematurely taking
these off and not getting my money's
worth. I don't know. Let me know.
How you decide to take these off?
Heat.
Heat.
Heat.
Heat.
Heat.
Heat.
Heat. Heat.
[Music]
Heat.
Heat.
What do you think of it?
>> Huh?
>> Looks pretty, huh?
It's pink right now, but you put water
on it, it'll be red. Like a like almost
like a maroon color,
>> huh?
Oh, you going to go put it in water?
Here's some more pieces if you want
them.
Just be careful so you don't poke
yourself. But yeah, put it in water and
see what color it turns.
[Music]
I'm going to go ahead and fire it back
up again. There
heat.
I don't know what that was, but I
reached in my shirt and I pulled out a
leg. One of its legs I had had in my
hand. I like, "What the heck is biting
me, stinging me, something?" That little
joker was mad at me and now I'm mad at
it. Ow.
Go away, bud. Get off of my shirt.
Go.
Jeez, that hurt. When I moved the beams
around that I had the lumber stacked on,
we found Grace's red ball, which she
loves. I just threw it off into some
tall grass and she's got grass stuck
into her collar.
Grace, are you okay, girl?
That that grass not bothering you at
all?
It's her superhero cape.
I'm a dog and this is my cape.
I chase balls.
Let's get this out. Uh, Grace.
Gracie, stay, baby.
Good girl. Let's get that off of you.
Heat.
Heat.
Heat.
Heat.
Heat. Heat.
[Music]
Heat. Heat.
Heat.
Heat.
Heat. Heat.
Heat.
[Music]
Heat.
brand spanking new blade for this log.
And I popped it off dragging backwards.
I rotated the can here and I forgot that
one dimension was still high. Just
complete mental lapse and blade popped
off. Uh, I put it right back on and kept
going with it and I didn't feel any
difference as I was pushing it through
as far as resist resistance go. That
being said, this is only like 6 in wide,
so I wasn't going to get much resistance
to begin with. Uh, I probably smoked
that blade, but wanted to get one or two
more cuts out of it.
That sucks. Is what it is. Well, you can
tell summer is winding down. It's
getting dark sooner and sooner. Uh,
right after milling this log, I had to
jump in a shower and get all washed up.
There was some poison ivy on that and
I'm not doing that again. Uh I got down
to this size of a can. This is this
size. This is uh a little more than five
by a little more than six.
And I was going to continue on to it,
but it's it's just too far eaten up. So
all the pieces that I'm after are, you
know, small sections for birdhouses. So
maybe I could have got a piece from here
to here and maybe one over there. But
that doesn't justify taking another
whole one by layer off. I think there's
more value in this to somebody if I just
leave it as this and see if I can't find
somebody who wants it uh for like a I
don't know stabilize it with epoxy and
turn it into a fireplace mantle or
something. Uh the other two sides which
I don't know if I can twist this flip it
where I'm at. Other two sides have a lot
more deterioration. So then I don't know
the the whole epoxy thing is that uh
opportunity for embellishing and making
it look nice. I don't know. But anyway,
I think this is going to be more
interesting to somebody or more valuable
to somebody um in a large section like
that, even if I give it away. I did get
a decent yield out of that log. Much
more than I thought I would. You know,
it's not perfect stuff. Everything is
all split and gnarly, but there's plenty
of sections that I can cut out enough
material for birdhouses. And couple
pretty decent boards, right? There's a
couple in here that are like nothing but
hardwood.
Beautiful. Beautiful stuff when it's all
this color. Like that looks so good to
me.
Looks pretty good. I'm not worried about
sticker stacking this tonight. Um it
doesn't feel wet at all. Like this stuff
feels really really dry. I don't know
when the tree was taken down. Um but I'm
going to throw the fan on it regardless.
Let it sit overnight. I will sticker
stack this in the morning and then I
will probably get into that top section
of the log. That one there's a lot more
branches and and limbs making it look a
little gnarly on the outside, but
structurally it looks like that one has
more solid core to it. So, I don't know.
We'll see how we'll see how much we can
get out of it. Um hopefully we can get
just as much yield out of it as I did
here. And it should be plenty enough for
the kids' birdhouses.
[Music]
Heat.
Heat.
[Music]
Heat. Heat. N.
[Music]
Heat. Heat. N.
[Music]
Heat.
[Music]
Heat.
[Music]