One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Video Summary
AI Generated
Joe's Video Games and a technician examine and restore a 1990/1991 Data East Batman pinball machine. The process involves addressing significant playfield wear, correcting improper glass fitment, repairing \"hacked\" electrical wiring, and resolving mechanical flipper issues to return the vintage machine to a fully functional, playable state.
Ladies and gentlemen, this is Joe's Video Games back with another cool
pinball repair video for you this evening. We've got a whole
building full of pinball machines we're working on. I think we fixed
in a row now that have steadily came in without getting
caught up. I think we fixed seven in a row.
Finally five. I think this is our eighth one in a row,
which is cool. We're staying real busy. Today
is the day you've all been waiting for. Batman has made it to the
top of the queue. We are working on Trevor's Batman machine.
This is one of my buddies. He's a big collector
of all things 80s. He has a YouTube channel here called Trevor in the 80s.
We have it linked on our... We're subscribed to it on all of our
channels, so check him out. Trevor in the 80s.
He does all kinds of cool stuff. He kind of goes through these phases where he
gets into a certain thing and then he goes through it for a while. Then he
moves on to another thing and he comes back to the other thing. For a while
he had a General Lee car from the Dukes of Hazzard.
Of course, that's 70s and 80s. I think it is.
It goes back to the 70s, doesn't it? I don't know. I was a little baby.
Trevor wasn't even born yet then, I don't think. He's a little younger to me.
He was all into that and he had a...
I think Roscoe's car, too. He had a lot of fun with that.
I think he had two of them, actually. Two General Lees.
For a while he had an A-Team van, completely decked out. We did a video
here on our channel of it years ago. Like I said, there's videos
and stuff of that on his channel, Trevor in the 80s.
Check out his channel if you haven't. This is his Batman machine.
He's had many pinball machines in the past.
He had a Teenage Mutant Ninja Turtles. He had a Back to the Future. You see the
theme here. Batman came out, I believe, in
89, if I'm going to guess. This was a little later. I think this
came out in 90 or 91. It's a Data East. He's all into it. He got this from a
collector. A guy had it and had a bunch of
other Batman memorabilia. I think it might even been a comic book store or
something like that. So he went and picked it up and it's in
pretty good shape cabinet-wise. The cabinet looks very nice.
The back glass looks very nice. The play field
is kind of rough. I don't even want to scare you with this play field yet.
You might be able to tell from here. It's a little rough. We're going to see what
we can do. Mylar has reared its ugly head again.
We'll see what we can do about that though. It's got one coin slot here on
the front, which usually means that it's an import
or re-import. So all of these were made in the United States,
but then a lot of them were shipped to Europe.
It's back in the United States somehow, some way, so it was
re-imported at some point. So let's see. It says 50 FR. I would guess that's
francs, which I would guess is French. I don't know folks. Just
in the back of my mind, that's what it says. I've never spent a franc.
Yeah, the copyright on the side says 1990.
Trademark and copyright 1990
DC Comics Inc. When I was a kid, Batman was about the coolest thing in the
world. Batman, Hulk Hogan, and my dad. That was
about the coolest people I ever saw on TV.
There's a little piece of tape on the side of it here. I don't know what
happened there, but we're kind of afraid to take it off.
It might peel the paint off. Okay, so awesome back glass. Oh, I should
mention this too. The back glass was painted by the one and only
Paul Ferris. This guy made some of the coolest back glasses
ever. If you don't know, you need to find out.
I'm gonna take the glass out just to show you the play field
because it can't do it justice with the glass on. So I'm gonna take the glass out
so we can get down and dirty with it and then see what you folks think. Okay,
so I've taken the glass out of it. Sometimes,
especially on re-imported games, you run into some weird stuff
because theoretically, or at least the excuse is,
when the games are overseas, and this is historically too by the way, this is 35
years ago so this isn't today, but 35 years ago maybe it was harder to
get parts. So if you had a problem, you had to just
make do with what you could find and so you find things on the machines that are
a little weird. Shouldn't have been done like that,
whatever. So one of the things on this one is the glass is too small.
So I have a regular sheet of glass here for a pinball machine and if you don't
realize, most pinball machines, all of the
vintage ones at least, have the same size glass in them.
So all of these do. Now, maybe not this bingo, but those three
are three different brands. You've got a Gottlieb,
a Williams, and a Stern. They all have the same size glass in them.
It's just a thing. There's a Bally Evil Knievel has the same size.
There's an old EM over there. A Stern EM has the same size.
There's a Sonic Mars Trek over there has the same size
and a Bally Captain Fantastic, which is what this one is. They're all the same
size, but the one in this Batman has been
replaced. So it's all different sizes. So first of
all, the sticker. So here's the original. Here's this one.
So I think this is 3 16ths and this is a quarter inch
and then also it's too tall, which usually there's a little bit of play
on the height. So it's maybe three-eighths of an inch too tall
and then it's also not quite wide enough.
So it's about a quarter inch too narrow. So the problem that you run
into whenever it's like that is it falls out of one channel on one side
or the other. So it's supposed to fit up in these
little grooves here, but because it's a little
short, if it's all the way that way it'll fall right out of this channel.
So it's kind of, it sits in there weird. It's not quite right.
So glass is expensive, so we'll probably see if we can figure out a way to make
it work. Maybe if we, I don't know, I'll think
maybe I can think of something. If we put something behind that channel
it might work or something. We'll think about it.
Or Trevor might just buy a new pair of piece of glass. They're not that cheap
though. They're like, I think if he goes to Marcos
Specialties, they're probably like 70 bucks or something like that. He actually
lives in Columbia right near Marcos Specialties, so he might want to go over
there and get one. But anyway, so that's the first thing.
And then the play field has mylar on it, but the
mylar it appears at some point has gotten hot
and it's just a mess really. So I don't completely know what we're
going to do yet. I'm not a big fan of mylar, but let's
check her out. Are you ready? Are you ready? Now down here there is no
mylar and you can see that there's some damage.
But again, that's kind of common. That's not too big of a deal. That should clean
up pretty good. You'll still see it. And then over here
I can't even tell what's going on on some of that.
Like this is a better example. So this is where the mylar ends and it's
just down to bare wood in some of these spots.
Here it's been touched up at some point with just a black sharpie or something
and up here. But look at the actual mylar.
It's all like bubbled. So I don't know what we're going to do
with that. Now in a perfect world, what you do is
you heat it up and you peel it off. And you heat the adhesive, it lets go,
doesn't hold as much, and you just peel it off.
And then you clean the adhesive off. Or you can freeze it.
If you freeze it, the adhesive loses its ability to
hang on and you just peel it off. But here's the problem.
If you look at how deteriorated the play field is,
if I peel this stuff off, it's just going to peel all of the freaking paint off.
So I don't really know. I would almost rather just make it lay
down flat again. But I don't know if that's possible. I
thought about even trying to iron it. Just to iron it flat. The heat might
melt it enough that it irons it flat. Okay now up here at the pop bumpers,
pretty rough. And it's just got a lot of wear.
So a lot of the art is missing. There's some
Mylar in there again. And where the Mylar stops is where all
the wear starts. So like all that, you know, is down to
wood. It's all the way through the paint.
And it's even, it feels like it's even ate up the Mylar.
I think that is Mylar. It just, it ate through the Mylar.
So yeah, I don't know. Mylar stops right here.
Heavy wear as soon as the Mylar stops. And you can see,
like it just bubbles under it. So in this video, we're not going to do
anything with that. So I want you all to leave down below
what you would do if it was you. What would you do about
the Mylar? There is a, the easiest thing to do would
be to clean it up and just play the crap out of it.
Not worry about it. I mean most of the art's still there.
Yeah, it's not, you know, as nice as it was when it was original. But if we
cleaned it up, got it looking clean, and then just played it, what's wrong
with that? Does it have to be perfect? This one hasn't been perfect for a while.
Like the paint wore off, right? And I could try to paint it back,
but you know, I'm not a comic book artist. I'm not going to do a great job of that.
It's going to look kind of, it's not going to look as good as it's
supposed to. So part of me thinks, just clean it up and
roll with it. Oh, here's another pretty rough spot.
And you know, this is the type of thing too, they're not going to make a hard top
of this, I don't believe. And a hard top is really tough.
They call it a hard top because it's hard to put on.
Okay, you have to take every single thing off the play field.
You have to sand down all of the art on the play field,
and then put it back on top. And this is a licensed DC
Comics one. Are they, is hardtop printing up a Batman hardtop? I'll bet they're not.
I'll bet you they're not. You might be able to get an overlay that
somebody printed on the down low, but again, you're running
the same problem. You can't just put it on because what
happens is, and I did this once, what happens is the font's not the same
on the inserts. And they can tell you it is, but they're
lying to you, right? The font's not the same on the inserts.
And when you lay it down, you see the old insert and the new insert.
So it'll say everything twice. It'll say one million and then slightly off, it'll
say one million in a different font. Looks like crap.
We actually did one one time like that.
And so the only way to do a hardtop is you have to sand
everything off, at least the inserts. And if you don't sand it off,
the rest of it, you'll probably see, you know, bumps. But let's just say you only
have to do the inserts. Well, you know, that's a lot of work, and
we're not really set up for that. Let's see what it says here.
This game is protected by a stealth hard coat. You don't see it,
but you know it's there. Well, I don't know that it's there. I don't know. I'm
not so positive that it was there. Maybe this one, maybe they forgot.
We have arrived in the back box. There is a note on the back that I can't
read. It says grease. I think it's telling us the colors, isn't it?
Grease and can't tell the other one. I think it's saying grease. Is that gray?
I don't see any gray wires on the back of this. Equals
rude, gree, equals blal, and
grease, groon, twerk. No clue, people. I don't know. I'm not
sure. All right, so here is the CPU board.
Got the batteries still on it. We'll rectify that soon, folks. Don't worry
about it. They don't appear to have leaked on
anything yet. If you notice, one of the ROMs has a
new sticker on it. They probably, well, I don't know.
It may have had selectable language, or it could just be the sticker fell off,
so they just put that on there for safety, but it could be that they
reburned that to make it English, or it may have already had English
language on it. And then it has a brand new power supply from Golf Pinball.
Power supply for Data East Sega. I know Golf Pinball makes pretty good
stuff. I've worked on a bunch of their stuff,
or not worked on, but worked on a bunch of games that had
their products in it, and I don't think I've ever had a problem with one.
I think I, didn't I have one where it was blowing a fuse?
I mean, not blowing a fuse, blowing a cap, but it was because somebody had
the game wired wrong. I believe that's correct.
Okay, here is the Data East soundboard. Notorious for having a big loud buzz in
it, okay? Some people that drive some crazy, I
don't mind it at all. The only thing I mind about the buzz
that a Data East game makes is all the people that complain about it in the
comments. It's the only effect it has on my life.
If it wasn't for that, the buzz that a Data East
soundboard makes would have no effect on my life at all.
And this is the Power Driver board, or PP board,
Power, uh, uh, Power, uh, uh,
Protector board, something like that. Anyway, I got schematics, folks. I don't
have to remember all the names. Everything looks pretty good to me.
Yeah, I don't really see any problems. Well, obviously, this is problems, but I
don't see anything crazy going on. So, what's going on here? Well, it
originally would have had a regular power supply on here, the original one,
and at one point, that burnt all to hell. So,
they have wired up another connector to fix the issues
they were having. So, basically, these are the AC lines for the,
for the, uh, for the light bulbs that are the general
illumination under the, um, plastics. And so, they're on all the
time, and you get a lot of amperage through them, and they burn up the
connectors. So, it did that at some point, and they have used this to,
um, put new end pieces on. So, they cut the connector off,
didn't have access to a suitable one, and just did the best they could.
And again, you know, it was probably in France. They didn't have parts. It was
1990, you know. Um, there's another one here, too.
Probably the same thing. We can probably fix all of that with the proper
connectors. Clean all that up. All right, so
everything looks pretty good. So, I'm going to put the
display back on it. We're going to close the
back thing, and, uh, we're going to look under the play field next to see if
there's anything screwed up down there. Okay, if you've never worked on a data
east, they have this neat little setup where there is a,
like, a rubber band in the back of it with an eye hook on it, and you attach it
to an eye bolt on the bottom of the play field.
And the purpose of that is it makes it where the play field can't come forward.
It holds it upright. That's pretty cool. And they just do that because there's a
lot of heavy stuff on some of these. I think the Segas are like that, too. The
Sterns, maybe. I don't know. If you don't know, Data East turned into
Sega, and Sega turned into Stern, basically.
Uh, let's see if anything else looks
manipulated. That's the best word for it. That all looks pretty good.
We got this motor here. These motors are notorious for going bad, so that might
end up being an issue. That's a potential issue.
Um, a lot of Data East I've had that I've worked on had a couple bad
coils in them, too, but we'll see about that.
Little lamp boards. A lot of flashers, like normal.
A little bit of rust on some of the sockets and things. No big deal, though.
And then the flippers. Three, I believe. Two. Is that a flipper there? No, that's
something else. A couple flippers. Everything looks pretty
good. 8-19-91. There you go. I know Trevor's
all into the... He loves figuring out the date and the history of the item, so
he'll love that it's got that underneath it.
August 19th, 1991. We were mentioning that it said 90 on the
side, but I think me and him had a talk about it, and he was saying that they
waited a while to release it. Uh, and this over here. This is actually
a board, too, that runs the flippers. It's like the... I can't remember what they
call it. A little flipper. We'll just say it's the flipper board.
How about that? I've never seen it with the cardboard on it, though.
Usually they've either taken that off or they didn't. I'll come with that.
Oh, here's another one. He may have already saw all of this.
I'm not gonna pull that off or anything. All right, here we go.
Country. Belgium. All right. Almost France. That was close. People,
they're literally right next to each other, from what I understand.
I mean, you know, that's pretty good for me.
Okay, so I'm gonna put it back down. We'll see if we can find some pinballs. I don't
think there's any in it. And then we'll try playing it and see if
the thing... Oh, there is. I see. Wait a minute. I see a couple pinballs up there.
We'll see if it'll play and just see what's up with it.
All right, folks. So inside of it, we do have the topper for it.
And believe it or not, we have an overlay for it.
Somebody made an overlay. That's all I'm saying.
I can't, like I said, I can't really do an overlay. It's just, it's so much work.
I don't have the ability to do that. I've done one or two before back in the day.
It just takes so much time and I'm slow anyway.
Whenever I did the one I did, like I said, I didn't sand off the
inserts and it just ended up looking worse than it did before.
But apparently there is one floating around out there.
We've also got some LEDs, like LED strips that he wants to put under it.
If you're a long-term viewer of our channel, you may have seen his
Back to the Future pinball machine that had LEDs on it.
We're going to do the same with this one.
And then he had a Teenage Mutant Ninja Turtles that had LEDs under it.
And he had a Teenage Mutant Ninja Turtles arcade game that had LEDs under it too.
If you didn't see those videos, they're here on our channel.
Let's see if this thing will boot up or if anything goes crazy.
Batman, Belgium, free play. Okay.
So the batteries must still be good because it remembers it's on free play.
Pals that play me, but remember winners don't use drugs.
Okay, let me get the tripod.
What a cool game.
Like I said, I'm a big Batman fan.
In the 90s, whenever they did the Superman, the Death of Superman thing.
After that was so successful, they did a thing with Batman where they broke his back.
And as a teenager, I started reading comic books again whenever the Superman thing happened.
And then they moved right into the Batman thing.
I think it was probably within a few months after the Superman thing wound down.
They're advertising for Star Trek.
And I got to say the hum on this one's not that bad.
Flippers work.
There's a bat cave.
Skill shot's the middle one.
Look at the skill.
Look at the skill, people.
Right into the bat cave.
Auto launcher works.
There's the museum.
Door went up.
Right back at you.
Multi-ball.
Okay, that's how you fail an auto launcher.
You put two balls in at the same time.
Three seconds left.
Do you see that skill shot?
Flippers are pretty decent.
They need a little work.
Yeah, okay.
They heard me talking.
So the right flipper is sticking a little bit.
All right, I'm going to show you a trick with the flipper.
There's a little piece of foam in there.
There's a piece of foam that they put in the shooter lane
that's making the ball not fall where it goes.
Okay, I'm going to show you a trick with the flipper.
See how it's stuck up?
Okay, so I've turned it off and it's still stuck up.
So the reason you do that is you're testing to see why is it stuck up.
So is there an electrical problem causing it to stick up?
No, there's not because their power's turned off, right?
So it has nothing to do with electricity.
It's physically stuck.
You can't always tell by playing with it,
but if it's stuck up even when the thing's turned off,
then obviously there's some kind of mechanical problem going on.
It's probably just worn linkages or loose screws
or it needs a new sleeve or things are just...
I've got grease all over and it just needs cleaned up.
So that's no big deal.
Now, and they won't always do it without you pulling the plunger in.
It could be a magnetic thing too.
When the plunger comes in and hits the coil stop,
sometimes the coil stops magnetized after hitting it so many times.
It'll actually...
This is my scientific talk for you folks.
So you write this down.
It hits it and it makes the electrons move around in there
and it makes it where it makes the neurons
and the protons make the electrons oppose each
and it makes a magnet from hitting it.
So something like that could be going on where it's magnetized.
You can demagnetize one, believe it or not, by beating it with a hammer.
We've actually done that here on our channel a couple of times.
So there could be something magnetized on that.
And that plunger, whenever the coil pulls it in,
it's pulling in the actual steel or whatever, the metal,
and it's pulling it all the way in.
Well, if I'm doing it by hand, I'm pulling from the other end.
So maybe that plunger doesn't get all the way back to where it hits the coil stop,
just depending on how it's all set up.
So you might not get the same magnetic effect
or if sometimes there'll be grease inside of the thing.
So whenever it pulls in, the plunger is hitting that coil stop
and there's like a sticky residue on it and it literally sticks.
And maybe when you do it by hand, it doesn't do the same thing.
But if you turn off the machine and it's still stuck up,
you've got some kind of problem with right on the flipper.
It's like some kind of mechanical problem
where something's not moving right.
Something's dirty usually.
If you turn it off and it immediately falls down,
well, then there was something electrical holding it up.
And that's your problem.
All right.
So she plays pretty decent, but it's worn.
Like it has real wear issues.
So this didn't seem to affect it too much,
although it probably did change the course of the ball a little bit.
It's just little stuff like every time it comes around here,
it moves that sign and stuff like that.
How the gate was kind of doing some janky stuff and stopping and things.
We got to look at that.
And we didn't try the Joker shot.
Of course, all the rubber rings are worn out.
So the ball doesn't bounce like it's supposed to.
This little post here is so beat up that it's wiggling all over the place.
Of course, the flipper problem, the little piece of there's
somebody's put a little piece of foam in here,
probably because the ball was getting caught where the
ejector wouldn't shoot it the way they wanted it to.
So they put a little piece of foam in there to keep it falling in the correct spot,
but it's a little bit too thick.
So sometimes the ball gets stuck.
Just tons of little stuff like that.
The way you fix most of that is you take a lot of stuff off the play field,
clean everything up.
And then as you put it back together and make sure everything is
tight and where it's supposed to be and as good as possible.
So they call it shopping it back in the day.
Like if you're an operator out on location,
you might clean the play field up a little bit best you can,
but you're probably not going to do that good of a job.
But you got somewhere else to be.
If there's a broken rubber ring, you might swap it, but you leave the other ones.
If the flipper is messed up, you work on it and then leave.
And maybe you fix it with whatever you got.
Maybe you got a used coil stop you put on there to fix it or something.
And so whenever you did that, problems would mount up eventually.
And I'm not saying this is how you should have done it.
I'm just saying this is how the operators did it.
And I kind of understand why they did it, especially if you're in Belgium.
You're a long way from Chicago.
Eventually, all of those problems would add up to where the thing
wasn't earning as much money because the customers were pissed off
or because you had some serious break that couldn't be fixed.
And I used to work for an operator.
So what would happen is once Batman's been in one location
and it's starting to deteriorate, it's having problems,
and maybe they don't like the game or maybe they're just tired of it, the money goes down.
So maybe it was making $80 a week and now it's making $15 a week.
Well, it's probably time to take Batman out of there, right?
And so then what you would do is you would take this to the shop and shop it, right?
So it's going to be at the shop for a week.
And there's a guy at the shop that goes through them
and can fix every little thing on it and get them in much nicer shape.
And then when you pulled this one out of the bowling alley,
maybe you took it Monster Bash instead of this one.
And so now they got a new Monster Bash and it just came from the shop
and it's all fixed up and everything and it's working great.
And now it's making $80 a week again.
And you shop this one for a week.
You get it all where everything's working great
and everything's clean and the best possible shape.
And then you take it to the skating rink.
And the skating rink has an old one in there that maybe they've got an old F-14 or something.
And it's all kind of ran down.
So you take it out to shop it and you bring them your Batman.
And when it comes in the skating rink, oh, it's like a new game.
They've never seen Batman or oh, I love that game.
I saw it at the movie theater one time or whatever.
And so all the people that go to the skating rink start playing it
and then the same thing repeats and repeats and repeats.
So we kind of had tiers of locations.
The best ones that we had usually were bowling alleys.
You'd make the most money there.
Some bars, but I didn't really do that many bars myself.
And then skating rinks were under that and on and on, right?
So that's kind of how it works.
So the thing needs to be shopped.
It needs to have all of the stuff fixed on it, all the little minor things.
And that's why Trevor brought it to us so that we could look it over
and get it playing as good as possible.
You can play it how it is, but it's not really, you know,
the right flipper is going to annoy you.
Some of the switches might not be working.
Everything looks kind of bad because it's all dirty.
It's just, you know, it needs some help.
So that's what we're going to do.
This is the overlay.
I wanted to show you what I was talking about.
Look at where it says supercharged bumpers.
Okay, look at the font there and then look at the font here.
See the kerning between the lines?
And look at it here.
This is a different font.
Now they did the best they could, but if I put that,
it's not going to line up perfectly over that.
It's going to look off.
Okay, look at the one million and look at the one million here, right?
So you're going to see everything underneath it.
I'm not trying to dog the people that make the overlays.
I'm just saying it's a complicated thing to put on.
You have to sand off all of the art on the play field.
You have to take everything off the top of the play field
and then you have to try to line up the overlay
and they don't always line up correctly anyway.
The one I had didn't.
Some of the holes are in the wrong spot.
And that's another thing.
If you have ever heard or seen people talking about getting a replacement play field,
you can get an entire replacement play field on some titles.
A lot of times, a lot of the dimpling and the T-nuts and all of that,
the holes and things, they don't line up.
It's not in exactly the same place.
If it's off an 18th or 16th of an inch,
you know, it causes you all kinds of trouble with trying to align it.
Now you can just slap the thing on there,
which is what I kind of did the other time that I did it.
It just, it's not an easy job.
So the job would curtail or pertain of taking every single thing
and by everything, I mean every little piece of metal possible off of this play field.
All of the posts, every little thing.
Sanding it completely flat.
Tearing off all of the mylar, just trying to get all that art off
is going to be the biggest damn mess you've ever seen in your life.
And then putting this on there, it's not going to fit perfect
and you're going to end up with, you know, it looks pretty decent but,
you know, it's like, you know, a dot matrix print.
You see the quality there?
Look at the red on the, look at that.
Is that really, I just, I don't think there's a good option here.
That's the whole thing.
This is that same area on the play field.
See the clouds?
There's no red bubbles in there and it's just, there's weird stuff too.
Like, see the sign on the roof axis or whatever it says?
It's not on this roof.
Let's see the quality there and see the original quality.
Yeah, I've been thinking about it a while.
I'm trying to decide the best way to do it and I don't believe it's this overlay at all.
And I, but I also don't believe I can repaint this play field
and I don't believe I can remove the mylar.
So we're kind of, we're in a weird spot.
Okay, so back to the power supply.
We don't have to rebuild it because it's brand new or new enough,
but we need to redo this connector.
I just took this off and I think I put it back on the same direction they had it,
but it could go either way.
So I'm going to look on the schematic to see which connector is supposed to be on the top.
Is it supposed to be the solid color ones or is it supposed to be the white colored ones?
So we'll figure that out first and then we'll replace the connector with the original stuff.
So the good thing about working on Data East,
Stern and Sega pinballs is all the documentation is available
and has been released by Stern to where you can see all of the stuff.
So it's easy to get a copy of the manual.
It's online on the internet pinball database ipdb.org
and it shows right here how that's supposed to be.
So the solid color wires, brown, yellow, green, violet are pins 1, 2, 3, 4.
Then there's a key in the middle and then 5, 6, 7, 8 are the ones with a line.
Now, why is that even important?
Well, of course you want the stuff plugged in where it goes,
but also I'm trying to see if we've got enough room
to stretch the original wires up to where they go
so I can get rid of this crap that they hacked on there.
And I think we do.
I think if I stretch it a little bit, move the wires around a little bit in the loom,
get them a little, see like this should be up a little bit
and this should be up a little bit.
Those four need to go to those bottom four pins.
I think we got it.
So I'm going to put a brand new connector on it and get rid of all this crap
and that'll be the first one and then we'll work through the other ones.
So I'll cut all this crap out.
Much better.
And I looped it through the little strain relief here
so it's not hanging by the plug or anything.
And there's extra, I was able to pull some out of the harness
here to give it a little more slack.
Okay, so the next one is, it looks like a four pin,
no, a five pin connector that they only have two pins on.
And the problem with all that is you can plug it in the wrong way.
Now that one has a key, so I guess you wouldn't be able to,
but let's look and see how that's supposed to be.
All right, so on the original connector seven, there were only three pins.
So that's the factory plug on that.
So we're going to leave that alone
because I can't really do anything to make it better.
If I made it where it had five pins,
it might not fit on an original power supply for everybody,
if anybody ever put one back.
So on to the next connector.
So there was some masking tape on a couple more of them.
And then we got this one.
So I guess this is the only one that's still messed up.
I don't even understand why people do this.
What are they doing here?
So they have separated the wires and then ran them through this.
And it looks like it's the original wires that have been cut.
I don't know why they would have done that.
Like, why would they cut the wires
and then reattach them back together with that damn thing?
Why not just leave them whole the way they were?
Maybe it got damaged somehow.
I don't see how.
And why would they have cut it loose there
when the plug's right there and they didn't cut the other ones?
And I don't think they replaced the plug
because if they had the pins to replace the plug,
they could have just put them on the end of the wires.
Okay, so I'm going to pull those pins out
and put the pins on here and then put them back in where they go.
Okay, so I got them fixed up.
They're in there nice.
That's how it ought to be.
I don't see any other problem connectors.
So we've got to work on the play field.
But I talked to the customer
and he's not concerned about making it look any better.
He just wants us to clean it up,
put new rubber rings on it, basically,
and make sure everything's working.
So we're going to do that and just leave the play field how it is.
We got to check all the lights.
We've got them here on the left and up there and on the right.
It looks like the ones on the bottom of the insert aren't coming on.
So we'll have to figure that out.
And we need to check all of the flashers and things like that.
And we still got to mess with the flipper.
But I think the next thing we're going to do
is have Joe clean up the play field a little bit,
swap the rings so that we're not...
Well, we'll do that and then we'll figure out what's not working.
So we'll clean up the play field a little bit first.
Okay, so we cleaned it up a little bit, replaced all the rubbers.
Or we didn't replace those two.
We didn't have those.
Got all the lights working.
The missing string there of general illumination
was a bad connection in the back on one of the insulation displacement connectors.
So we've got all the lamps working, I believe.
We had...
There was one behind here.
There wasn't any behind there.
And then if we go to the cycle, the flashers,
there were a bunch of flashers burned out, actually.
We've got all them going now.
There's a bunch of them on the play field and under the play field.
There's a couple behind here.
There's some behind here.
I think we're all good on the lights though.
And I think we're all good on the switches.
So what we need to mess with next is that flipper.
Now the flipper, I've mentioned earlier in the video,
you can tell if it's mechanical or electrical, right?
Okay, now if I just barely hit it, it will fall.
And you notice how it...
So there's nothing holding it on.
You notice how it fell whenever we turned off...
It didn't fall whenever we turn off the power.
The thing I didn't mention earlier, I don't believe,
is it can be magnetic.
So it could be the coil stop is magnetized
and it's the plungers catching on it or the sleeve or something.
So it's just barely holding.
If you turn it off, it stays like this.
But if I just barely hit it, it will fall.
And so it's some kind of just a mechanical thing.
And if it's an electrical thing,
when you go to put it down, it'll fight you.
You know, and this one's not fighting it.
So it's some kind of just mechanical problem.
If you look at the bottom of the spring, it's actually fine.
And it won't do it by hand.
It only does it when you electrically do it.
Lead me to believe there's some kind of magnetic something going on.
So I'm going to take the coil stop off
and then we're going to take the sleeve out
and just look at the plunger and all of that.
All right, I put a new sleeve in.
The old one's just dirty.
There wasn't really anything wrong with it.
And then here's the coil stop.
It's pretty dirty.
So I'm going to clean it off.
And then if it is magnetized,
if you actually beat it with a hammer a little bit,
it'll knock all of the magnetism out of it.
True story.
So I'm going to beat it up with a hammer a little bit.
Not really.
I'm just going to bang on it with a hammer a little bit.
Clean it up and then put it back in there.
And we'll see if that fixes it.
Will a hammer fix it?
All right.
Let's see if the hammer trick fixed it.
I've actually fixed it.
I've actually fixed that before on here.
What do you think?
Was it the new sleeve or was it the hitting it with a hammer?
I'm going to go with it was the hitting it with a hammer.
Okay, folks, we got her finished up.
So the last two things we needed to do to it.
It's showing off the Star Trek pinball machine that's coming up.
The last two things we needed to do to it
was he wanted to put a Batman shooter knob on it.
Kind of hard to see in the dark.
And he wanted us to put a purple LED kit under it.
And that's what we ended up with.
It plays pretty good.
And I think he'll be happy with it.
So there you go, folks.
I hope you enjoyed the video.
We will see you on the next one.