Fixing The Electric Motor In a 1959 Mastercrafters Novelty Clock !

Amateur Repair Time
257 followers
151 Video Views·Jun 28, 2026
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to Amateur Repair Time. I've been wanting to work on this
clock a little while. This is a Master Crafters, I guess, kitchen clock. I picked this up at the
flea market a few weeks ago for five bucks. These are just kind of little novelty clocks
that I think are from the 50s and the 60s. I've got several different variations of this,
but I've never seen this one before. I walked by it at the flea market, saw it on the table,
it's all beat up. I asked the guy how much, he said five bucks. I said, why not?
So we're going to see if we can bring her back to life. What do you think about that?
I've got it leaning up against my solder there. The cord is cut off of it. It was a white power
cord. I don't think I've got any white ones, but we'll just put a brown one on there to test it
at least. I think it's missing the glass, obviously. I assume it had glass. I would
assume it had like a domed convex piece of glass. Then it appears to have this little
windmill feature that is supposed to spin around while the clock is running.
So it'll be interesting to see if we can do anything with that. It's obviously missing
part of it, but if I can get three of them working, I'll consider that good enough.
Maybe I can find that part online, or I guess I could have it 3D printed. But
when I get things 3D printed, I have to have my buddy model it. It takes them a while. I hate to
make somebody work for something like this. This isn't going to be worth any money,
really, whenever I'm done with it. I just want to see it work again.
It's been beat up a little bit, and the second hand has been bent, but it's all still there.
And this is like a ceramic. This is actually very heavy. I'd say it's like
maybe three pounds, something like that. It's pretty heavy.
I think these are, like I said, the 50s and the 60s. So the back has a tin plate on it.
There's a couple screws or nuts. You can see where there was a hole to hang it on a nail,
and you can see all the scratches where it hung for many, many years in somebody's kitchen,
probably. And they probably just loved the thing. Let's see what this says, if I can read it.
Push into set. AC 110, 60 cycle, two, 60 cycle, two, five watts. Is that saying two point,
hmm, two to five watts? What's that saying? I don't get that. Patented in the USA, and it's
Model W. Other patents applied for Ceramic Clock Company, Chicago, Illinois.
This was a really interesting company, this Master Crafters. So you see their name on it,
Master Crafters. They made many of these, many different types of clocks. And I've got,
I used to think there were about six different ones. No, I just keep seeing them. So I think
there's about 30 different ones now. I've got five or six different ones, and it says clock
movement by Sessions. So you see what's going on here. This is the Ceramic Clock Company.
This is Master Crafters, and then Sessions made the movement. So they were kind of just
putting together whatever they could and making different designs.
And they all had some kind of little novelty thing, like something that moved or whatever.
Usually the movement has one little gear in there that allows something to be hooked to it,
to move as the movement is moving. And they're all electric clocks with a little electric motor in
it. We did a video where we took one apart and took the, had to take the whole motor apart.
Hopefully this one won't be that big of a deal, but we'll see. Let me show you a few of the other
ones that I've got, just so you can see what I'm talking about. There were about three different
companies that made these novelty clocks, and they'd have a light on it, or they'd have something
that moved on these electric clocks. So let me show you a few of the other ones that I've got.
So here's two of them. This one was my father's. He was the first one that collected anything like
this. He liked watches mainly, but he had a couple of clocks. And he picked this up at the flea
market many, many years ago. And on this one, the guy's little pipe lights up. I've actually got two
of these because I saw another one at the flea market for five bucks. So I bought it too. And
then this one is, I think called Playmates. It's also a Mastercrafters, but it has a,
they're supposed to be a little boy and they're on a swing too. And they both swing back and forth,
but it's damaged. That one little figure is missing. I just have it. There's also,
I think a little fence that goes on the front that's missing. I just haven't taken the time
to track that down yet. Here's a couple other ones. This one was also my father's. It's a waterfall.
So whenever you plug it in, nothing actually moves. There's something inside that moves to make it
look as if the water's flowing. It's just kind of an effect. And then this one is a little
schoolhouse or church house. And there's a little guy inside of it there
that as it runs, he pulls a chain, which makes the little bell ring up at the top.
And it doesn't do it as an alarm. It does it the whole time that the thing's running. And
we've got a little red light in there. So I did a video showing these off before,
just working on them and just kind of looking through them. But there were other ones as well.
Like I said, I think Sessions made some, and I think United made some that were animated, but
to me, they're just interesting. You pick them up pretty inexpensively.
And there's also a famous one, like the little swinger that I showed with just one little girl
in the middle that swings on a swing. The Playmates one was the one with both. I think
there's one where they're skipping rope or something like that. And there's a fireplace one.
But then they, these were kind of the first ones. And then they moved on to the ones that are more
like the one that we're working on today. So this isn't the one that was my father's.
This is the other one that I picked up at the flea market. The motor is running inside,
but the clock is not running. So something's off on it, but you can see his little
pipe that lights up. And you can also see that it does have a convex glass on the front of it.
And I'm just saying convex because it's not flat. If it was flat, it would hit the hands.
So it's bumped out a little bit. So they've all got a little something like that going on. So
we'll see what we can do to take this one apart. All right, just two little quarter inch nuts on
the back. Looks like rust, like it was wet. Look at the, all right, what have we got going on?
The whole thing comes out that easy. Look at the, look at the little windmill. It's not hooked up
right, is it? It doesn't have whatever it takes to make that move. I'll have to figure that out.
Maybe that's not supposed to move. I don't know. I just assumed it was, maybe it's just a little
thing that sits on there and just is to be three-dimensional. All right, so let me take this
all the way off. Well, yeah, that, that piece is just for looks. There's nothing to turn. It's just
like a nail. Look at that. I will look online just to make sure that this hasn't just been rigged up,
but it looks like it was just always a kind of just a decorative thing.
Um, hmm, well, well, that sucks. All right, so if you look at the actual movement,
I mean, it all looks pretty good. It's a little Sessions electric clock movement.
Forestville, Connecticut. Is that what that says? Yeah, Forestville, Connecticut, and it has a 59
stamped on it. Oh, no, it doesn't, does it? Does that, am I reading that upside down?
Is that a 65 or is that a 59? That kind of looks like a 59. I mean, yeah, look, you see the UL.
Yeah, okay. So it's all this direction. So all of that is stamped on like that. All of the top
text is like that. The UL code is like that and that's like that and says 59. Yeah, so that's
pretty cool. All right, so I'm going to try to get a little bit of oil down there in the top of that
shaft going into that motor. Um, and I can't do anything about this side. I guess I can, well,
I don't think I'm gonna take that off. It seems to be spinning freely. All right, so we're going
to do that and then we're going to, I think it will sit like that without interfering with anything
and, uh, we'll get some power to it and see if the thing still runs.
Okay, so I have temporarily hooked up a new power plug to it.
What do you think? Is she gonna work? I gotta put a little oil on it.
All right, I've got power hooked up to it, but it don't look great.
And, well, wait a minute. That might just be how it's supposed to spin.
Is the second hand hung? Oh, yeah, that's fine. Well, look at that. Well, no, obviously it's moving
at different speeds. Or is it? Okay, maybe I do need to get that off so we can clean it a little
more. All right, so if I hold it like this, it runs fine. It seems to have something to do with
that plate on the back of the rotor. If I turn it up straight, that moves in and then slows down and
it doesn't run fine anymore. So there's some kind of physical something or the other going on.
And remember, the glass was broken. This was all smashed, so I wonder if
something got pushed out of place or a seal got busted or something. This is going to be
hard to tear that all the way apart from the front. They didn't really make those to be
disassembled. But we're going to give it our best shot. So miraculously, I was able to get the hands
off without breaking it. And this is the little movement and gearbox. So let me see if I can
figure out if there's some play or if... I don't know why that... And there's no... There's nothing
going on on the other end whenever that... I wonder if there's a spacer in there that got
messed up or something. Well, there's this wonderful little design where you just kind of
spin the motor and it pops right out because it's got these three little
gimmicks here. And so it snaps in. So in other words, you wouldn't even have to completely
disassemble this. If you just grab the motor while it was attached to the gearbox and everything was
still hooked up, turned it, you can pull it right off. Which also means you could replace it pretty
easy. But I don't know that the motor is actually the problem. So I'm going to keep messing with it.
So yeah, that is the play. So this moves in and out. But I don't know if it should be like that
or not. I don't know if I can further disassemble it. Okay, so the way I took it apart was this side
has a little gear on it and it's on a shaft. And the shaft appears to be on the back of this.
And so I placed it on a vice or an anvil with that down through the hole.
And then I've got a whole, I've got a ton. This isn't even all of them. I've got probably three
times as many of old clockmakers tools or clock repairman's tools. And so I've got all kinds of
little files and stuff. And I looked around and I actually had a little tiny, you know, what would
you call that? Like a little punch. I don't know what that's for, but it fit right over that pin.
And then, you know, I just kind of theorized that if that's pressed on that, if we, if it has room
to go down through the anvil and I tap it, ding, ding, ding, ding, ding. And sure enough, it came
right apart. But I don't know what I'm looking at. So I don't know if there's a spacer missing or
what, you know, basically if that thing, oh, you know what? It could just be,
it had a bunch of like dried grease around it and I've wiped some of it off already.
It could just be that, that dried grease was making it stop by rubbing it up against here.
So maybe if I thoroughly clean this, get this all nice and clean,
because I think this is just a fan is all that it's doing. Yeah, it's just spinning this.
Well, no, it's not just a fan. This is actually what's spinning, what the magnetic field is
making spin. And it just happens to be attached to that shaft. Okay. I'm just going to try to
clean everything and then put it back together and see if that makes any kind of difference.
Because this is all like really sticky and the bottom of that was too. So we'll just try cleaning
it, putting it back together and seeing if that fixes it. Well, would you look at that? It was
just the dried up grease on the back bearing. So now with it down and I didn't pound it all the
way and I left about as much play in it as it had before. It's just off to the races. And if you
don't know about these electric motors, if you're watching this video, you probably know more about
them than I do. But if you don't know about these electric motors, they run off of the hertz signal,
the frequency inherent in the 120 coming out of the wall. The 60 hertz cycle is what has it run
at a particular speed. So as long as it's oil dry and you don't have a bunch of physical
problems with it, it'll just do its time and its thing and keep perfect time.
So yeah, so if you get one of these, you need to pound that freaking bearing out
or not the bearing, it's basically the rotor, that shaft out and then clean up the back of the
fan or your rotor, whatever you want to call that. And that'll get you back to the races.
That's awesome. Also, you do not have to take the whole thing apart. Just twist the motor counter
clockwise and it'll pop loose from the gearbox. Now this is the Sessions version of the motor.
There's also the Sunbeam version, at least. There might be a third version too. Like I mentioned
before, this company MasterCrafters was just getting off the shelf parts to create their
clocks. But still, I love them. I think they're really cool. And it's cool that we took it all
apart anyway, because we've got to clean everything. All right, so I'm going to stop playing with this
and we'll start cleaning some of the other stuff. Okay. I cleaned the face off as best I could with
some oil, just cleaning it up a little bit. It's got some little check marks on it and stuff. I've
done a couple other ones, like I mentioned before, and they all kind of get that going on on it. I
don't know if that's, it's strange though, that they're circular. I wonder if the hands did that
as they went around scraping it after it got smashed or something, or if that's just how they
start to deteriorate. But I'm happy with that. I don't need the thing to look perfect.
Look, it looks better from that angle. All right, I found a piece of glass and it's just
slightly too big. I mean, it's so close. I've almost got the thing in there, but it's just
slightly too big. It won't quite seat. So I'm going to take it back out and I'm going to just
sand the edge of it a little bit. It almost looks like it's been hand cut. I don't know how you
would hand cut a piece of glass. I guess they were all hand cut back in the day. So maybe it's
just off an old clock. I've got a whole box of glass. This particular one is trying really hard
to fit. So yeah, I'm just going to sand it a little bit, try not to break it, and see if I
can get it just slightly smaller. And I think that'll be a good one for us. Yeah, so that worked
perfect. I actually just took a little file. I don't know what grit that would be or what number
file it would be, but just a little fine file and just kind of wide and just for about three minutes
and it made it slightly smaller and it popped right in. And it's small enough now that you
can actually spin it in its place. So I think it has room to expand and stuff so it won't
crack on me. Oh, 1130. All right, so I've cleaned up the ceramic a little bit.
Originally the two wires that I cut off, well here you can actually see them, were soldered
together. So that's a good little idea. I think this is probably the original cord
and it was white, but I actually think it kind of looks better with the brown. I don't have any
white ones. I could order some, but I don't really want to use white ones on any of them.
So I always have brown or black. I think the brown looks good on this. White cords just look
weird to me. I've never liked this. So I'm gonna, I'm going to solder those back together and put
the same two little cap nuts back on it. And I kind of like just reusing whatever original
I can still get to work. All right, I cleaned it up a little bit.
Got the cord coming out. It doesn't need a grommet since it's ceramic, I don't think.
It didn't seem to originally have one. There's my sad windmill with one missing blade.
This actually, whoa, this actually goes in straight because of the back. So because of
where the two screws are mounted on the back, no matter how you put this in, it has to be straight
just because of the way they've designed it. It's a very simple design. So let's see if she works.
I got the hands back on. I straightened them out. What do you think? Second hand looks a heck of a
lot better, doesn't it? Some of the red paint came off, but it doesn't have to be perfect, people.
I've decided that I do not value perfection. I really haven't ever, but I think that's why I
get so upset whenever people correct me and tell me like that I misspoke or, oh, this is the better
way to do that. I hate all that crap. So I have people correcting me all the time. It drives me
crazy. And so I think it's because I don't value perfection. I don't care if there's a better way
to do it. I really don't. So yeah, so this looks great enough to me. I don't even think I care
about the blade being missing on the windmill. It's kind of part of its story, isn't it? Let's
see if she still works. She does. That is so cool. I can hear the motor in there too. You probably can
as well. They probably weren't the most quiet little things whenever they were running. Remember
when we plugged this one in, it sounded the same. So I wonder if it's running the correct speed. It
should be because of the 60 Hertz. Okay. So I'll set it. And then, uh, let's go look online and
see if anybody else has this same one. And if there's, uh, is set up different. I just want to
make sure that this is how this originally was and that this isn't just some thing where somebody
rigged it up and originally it actually did move. Uh, so let's see if we can go find this thing
online, but I'll set the time first and then I'll come back and we'll see if it's keeping good time.
Okay. Actually the noise that was making was because it was laying down. So when I pulled it
back up, settled up straight, it doesn't make very much noise. You can barely hear it. Very nice.
This is the kind of crap we have to put up with, with AI. Okay. So I searched master crafters
clock windmill model W and you know, I'm trying to look through the results, but AI pops up. AI
wants to help me. The model W refers to the vintage master crafters watermill clock.
Oh, okay. Watermill clock often misidentified as windmill. Oh, okay. All right. Released around 1991.
Okay. Well there's a date in it that says 59. So I don't think it was 1991.
Uh, it is a hand-painted cottage style clock depicting a picturesque watermill and wheel.
See, that's not the right one, right? But I thought, okay, well let's see if they're right.
I'll search for the watermill. So I searched for master craft clock watermill model W and AI tells
me the master crafters waterfall clock is often mistaken for a watermill. Uh, okay. Yeah, this
ain't going to work. I mean, this AI crap ain't going to work. All right. I can't find another
version of that same clock. It, you know, it's not going to be worth anything anyway. I'm just
trying to look and see a different version of it. Uh, but this is interesting. I found the original
patent for their swing time, their swinging clock. Um, and so it was, it was created by Ben Lerman,
the inventor. And this is the original mock-up of it and his original idea
for the little swinging girl on the clock. So that patent was in 1948 and here's a later
advertisement. You can see that they just were making all kinds of different ones,
just little novelty clocks. If you want to collect them, I didn't realize there were so many, but it
looks like there are tons. Um, but just be aware that they were not like meant to be high end,
high quality clocks. A lot of them you can get running again, but a lot of times you'll get one
and it's got plastic gears in it and the gears are broke or something. The, the sunbeam, um,
movements that are in them were plastic. So a lot of times those gears will be broken or have
problems. Um, we got lucky that this one was a sessions movement and it's just a lot better
made. But, um, a lot of times you'll get one and it just, it's not easily repaired, but you know,
if you collect them and you find one that's already working, that's a different story.
Here's another ceramic one. That's just a, you know, it's got the same movement, same, um,
this, the clock movement, you know, would fit in just about any case, obviously. Uh, so they,
those are all very similar. Um, but you can see that they were doing different ceramic,
cases for them over the years. This is, this one here was probably within a couple of years
of the one that we got. And here's an example of the swing time, uh, that we were just looking at.
Um, there's a, there's several different cases that this same idea is in, but this, this is one
of the nicer ones at least. All right. So I let it sit for about, I think it's been 40 minutes or so
and uh, it's keeping good time. I couldn't tell if the second hand was moving too fast,
but apparently not. Um, so yeah, I think that came out pretty good. What do you think?
I'm happy with it. Another one for the collection. I don't know that they make so many of them
though. I don't know if I can collect all of them. It's not going to be a Pokemon thing.
Now this one, when we had it plugged in, it was going to, you know, probably a very similar
problem to what this one had. It's the same movement. It's the sessions movement. So, um,
maybe we'll work on it some other time, but yeah, I've, I've found probably five or six of them at
the flea market and they're always five bucks. There was one, I've turned down a couple of them
because they'll just, there'll be some of the mechanical, the movement ones, the action ones,
and there'll be missing parts and you can just tell that you're never going to find all of that
stuff. But, um, they seem to pop up all over the place. They were probably a huge deal back in the
day. So I've, I've found a, uh, website where they were talking about one of them, the swing
time one, the famous one, uh, and that it was 1599 when it came out and that with inflation,
that would be $170. So just think, would this clock be worth $170 to you if there was one new
like that? And there's no way nobody would pay that. I mean, it's ceramic, it's got a decent
movement in an electric movement. I think there's just the motor is probably 30 bucks now, or maybe
even more if you could even get that same motor, but a comparable one. Um, but I would think shelf
price of something like this would probably be more like 50 bucks, um, for a brand new one at
this point. I don't know. They probably wouldn't make one this nice though. So I don't know,
but 170 bucks seems like overkill to me, but that, that was for the swinging one too,
which is a nicer one, but the, the, the case of it's plastic, I don't know. Um, but anyway,
it's good to get that going little clock video for you. I hope you enjoyed it. Leave your comments
below. And, uh, do you have any master crafters clocks? If you do let us know about it in the
comments. We will see you on the next video.
