How to power down a mainspring to safely disassemble clock.

Chrono Chronicles
8 followers
2 Video Views·Jul 21, 2026
Chris shows you how to safely and simply let the power off of an open mainspring on a countwheel movement.
AI Generated·May contain errors
Hey guys, welcome to Chris's Clock Shop. So in this short video I just want to demonstrate more
closely for the beginner how to let the power down on a count wheel movement like this where
the spring is open. Now traditionally you would use a metal c-shaped clamp which you'd actually
fit over the spring after you wound it. So the first thing you do is you take your bench key
and if you look here closely you can see there's a ratchet gear. Okay,
there's a ratchet gear here and this is a click that catches on the ratchet and then there's a
wire spring. The silver spring holds the click tight against the ratchet. So as I rotate this
one turn the click will automatically catch on the ratchet and if I let go of the power it won't
unwind. So you would wind the spring up as much as you can to still allow for a little bit of turn
in the ratchet and you'd put this c-clamp over it. However, I found in my experience that using a
good durable zip tie around the spring works a lot better and is easier to work with.
So I put my zip tie on here and now I'm going to show you how I let the power down,
loosen the spring onto that zip tie. So I'm going to rotate this. So first thing I have to do
is remove the silver spring from the back of that click so that when I rotate my ratchet with my
now hold this tight because it's going to unwind if you don't hold it tight.
So I'm going to rotate this to move that click out of the way and then I'm going to very carefully
and gently allow that ratchet to unwind with the click out of the way and what's happening
is the spring is unwinding but it can't because it catches on my zip tie and then once it's fully
taught on that zip tie, all the power is being held by the tie and not the gears. So now I do
that and it's safe to actually disassemble the clock. The gears won't go flying everywhere
because all the power is held by the zip tie. So many of you professionals already know about this
but I thought as a beginner it might be useful to show you a very detailed way to do it.
All right. Thanks for watching.
