One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool arcade game
pickup and hopefully repair video for you this morning. Today I'm out on location. I'm in Rock
Hill, South Carolina at this huge church. I'll show you a little bit more when we're leaving,
but there's a huge church over there and a super nice guy came in the store yesterday.
Apparently he watches the channel. I think he works at the church and he said that they've
got an arcade game in this house here. It's been in this house for about 15 years at least he said
and nobody has lived here for 10 years. You can see that the windows are boarded up and stuff
and it's an older house. The church I guess owns it and maybe the pastor lived here at some point
or I don't know. I don't know all the details. All I know is there's an arcade game in there
and it's been in there for at least 15 years and nobody's lived here for 10. So I guess they're
going to remodel this house and they want to get it out of there. So he gave me a super good deal
on it. Super nice guy, but anyway we've got a few steps. We've got to come down there,
but I'll be back with you whenever I get it loaded up. Got a few steps on the sidewalk.
There's the truck. I could probably pull down the truck and back right up to the door. I don't know.
I'll see what he thinks, but I don't know if I'm going to film inside or anything, but I'll be back
with you whenever I get it loaded up in the old Silverado here. My painting job's holding up in
case anybody was wondering. Painted this baby myself. I know it's not the greatest, but it
does pretty good. Hauled a lot of games in this truck. Getting ready to haul one more.
Well, this made me sick. I swear everything was going so smoothly. I'll get it unloaded and
tell y'all about what happened when I get it inside. Look at that. Terrible. I just can't
believe that. Well, I guess it'll be easier out here to explain exactly what happened.
So, the guy let me back up to the steps. Everything was going great,
and I set the game right on the gate just like this, and you know when I say I've seen it a
thousand times? Well, this I've actually done two thousand times. I've always done this,
but this is a weird cabinet. So, I set the game on the gate. Everything was good. Imagine all this
still being here. Okay, well, I gotta turn it around now. Well, the sides are plastic.
See the plastic? Well, I've literally done this two thousand times, but most games aren't plastic,
and they had this setting in front of a window for the past 15 years, so I guess it got brittle.
So, I tried to actually do it here, but it wasn't really going.
So, I put my hand here on the plastic, tried to give it a spin, and I didn't even put much
force on it at all, and the whole thing just shattered. Can you believe that? I literally
went like this, and the whole front of the cabinet broke off. It's definitely broke now.
This is a weird design where it's got plastic all around the screen, and apparently this happens to
all of these, and people want people to reproduce those sides because now I know that they're all
brittle, and apparently they all do this, but it's just such a shame because it was not broke
15 minutes ago. Crazy. So, this is just, it's terrible, and I'm just so mad at myself right now.
It's just one of those things, you know, it happened. It wasn't the guy's fault.
It was all my fault. I set it on the gate,
and I pushed it like that. I had no idea it was that brittle. I barely even touched it before it
started. It literally came off in one swoop. I went like that. The whole freaking, whole side
popped off. The whole front popped off. It broke in like eight pieces, and we were both just standing
there like, wow, and it sucks being mad at yourself, you know. If you're mad at somebody else,
you can just, you can get away from them, but if you're mad at yourself, you got to be around
yourself all dang day now, you know. Everything was going too good. The guy was like five minutes
from my store. He gave me a good deal on it. I was able to back right up. I set it right
on the gate. Everything was going perfect, you know. Cabinet looked like it was in pretty good
shape, and then I twisted the dang thing. I tried to turn it so I can turn it around and strap it
in the truck, and the whole dang thing shattered, and it's not even Monday. So, I mean, hopefully
this video gets some views. People like negative stuff like this. So, here's all the pieces.
That's the main one that goes around the monitor. Here's a big side section. I don't even know
where, I guess this goes on the top, I guess. I don't know. It broke all of those pieces.
This piece, this piece, all in one little push, and I wasn't even pushing very hard.
I mean, I guess I don't even know my own strength. That just really sucks.
So, I guess I'm gonna get it inside and try to
fix the game, and then I'll maybe try to glue all this back together. I don't know.
Only thing I know to do is try to super glue it and really glue it. That's gonna look like
crap though, probably. I might be able to bondo it up and sand it or something after painting.
I don't know. We'll see what we can do with it. All right, well, I got it inside. I waited a little
bit. I'm a little more calmed down now. So, I guess I'll tell you a little bit more about the game,
I guess. So, this is Sammy's Sports Shooting USA. This is a dedicated game. It's always been
in this cabinet. I don't know. I thought I was a pervert, but I'm still not a pervert.
One of those things. Look at that. But anyway, he told me what was wrong with it. He watches
the channel. He told me it was broke, but now it's even more broke. I think this may be the
first time that, you know, I picked up a game that was broke, and I got it back to the shop,
and it's even more broke now than it was when I got it. Sorry if there's a little bit of an echo.
I'm kind of back here in one of my weird little work rooms here. This is actually part of my
store, but I keep the gun games back here, and I'm pretty full out in all the other areas,
and I got a spot right here, and this is where the gun games go. Anyway, I put them back here
out of the main showroom because what happens is the kids will come in, and they'll grab the
dang gun, and then they'll run off, and they drop the gun on the floor. This one's already broke.
You can see they've taped it back together, but the shell's broke on that one.
This one seems like it's in pretty good shape. This is the two-player, and, you know, the one
player probably got the most use, but anyway, the guy said that was like a frat house type
thing or something or another, youth group, or I don't know. I've done forgotten now after all
that happened, but basically they had a pool table and everything in there, and dark boards,
and an arcade game, and they haven't used it. They said they haven't used that house
in at least 10 years, so this thing's just been sitting there for 10 years, and he said it's been
in there for about 15. It was right in front of a window, so it was sitting like this, but the
window was literally right behind it, so I have a feeling these were brittle to begin with, and I
think that sun behind the window didn't help us any, so anyway, he told me it was broke. Now it's
more broke, so now let's see what the heck's going on with it. I'll try to open up this control panel
at least. Two little latches down there. It should hold up. That doesn't do nothing for us but get us
to the in-out board, I guess. We don't really even need in there right now. We don't have any keys.
No keys. I'm glad the guy gave me such a good deal on it, because if I paid a lot of money for this
and I did that to it, I'd be even more mad, but it is what it is. So now we gotta fix it.
So I'm gonna move the tripod back around to the back, and we're gonna take off the back door. I'm
gonna have to pop the lock because I don't have any keys, and I'll show you the game board that's
inside there. Well, I got the back door off. There's nothing even back here other than the monitor. You
Where's the game board? I guess it's inside the coin door. Well, where the heck's the game board,
guys? It's like a magic trick. Do I gotta take off that panel? I guess maybe it's hiding behind here.
I'm gonna take off these screws. I had one of these a long time ago, but it's probably been
10 years ago. I don't remember the board being back there, but I guess it is. It's gotta be in
there somewhere. So I'm gonna get it some, take off those Phillips screws, and we'll see if it's
back there. I found it. I found it. There it is. All right. So this is a Thomas Wave. So they came
out with this setup. I don't know what this system's called, but it's basically a JAMMA board
that goes in there, and they've got cartridges. You can put a little cartridge in it. See that
little square? This actually comes out. You can lift this out. I'm not gonna mess with it right
now, but that cartridge comes out. Right now it's a Sports Shooting USA, but they made, I don't know,
maybe 10 different games you could put in there. All this stays in there. You just pop out this
cartridge and pop in another cartridge. It's almost like a Neo Geo type setup. They only had,
you know, 10 or 15 games, but it's a JAMMA board. On a gun game though, you can't really change it
around too much unless you want to redo the control panels, but I know they had a Faster
Than Speed, Sports Shooting USA. I think there was another gun game or two, but I've had several of
these over the years, not in a dedicated cabinet, thank God, with the plastic. Geez. But they're
kind of temperamental. Sometimes they'll work, sometimes they won't, and sometimes they'll freeze
up on you after it's on about an hour or so, but we'll see. But everything looks kind of how it's
supposed to be other than the plastic. But anyway, let's plug it in. Where's my cord? Here's my cord.
Here we go, it is. I'm not having a very good day so far. So you can hear it playing,
but listen when I first turn it on. I don't know if you're gonna be able to hear it on the camera,
but you're gonna hear a slight ticking sound. Tick, tick, tick, tick, tick. All right, listen
for it. Did you hear it? That means our monitor is in high voltage shutdown. Hopefully it just
needs a cap kit, and hopefully I don't go down a rabbit hole with that and have to chase a burn
up transistor somewhere, and the hot being bad, flyback's bad, and you put a new flyback in there
and it blows up because it's from China, blah, blah, blah, blah. I'm gonna try a cap kit first,
see if the hot's shorted, and then we'll go from there, but I gotta get that monitor out of there.
This thing's wanting to fight me the entire way, ever since the beginning. We're not off
to a good start. This game don't like me apparently. So you can't take the monitor out
the back. You've gotta take the whole tube out. Most games you just take the monitor board out
of the back of the cabinet, not this one. They didn't want to do that. They wanted to make the
whole thing out of plastic where it would break when you touched it, and you gotta take the entire
tube out the front to work on the monitor. So that's next. I gotta figure out, I guess I gotta
unhook that screw, that screw, and that screw, and this just clip, this just pushes out the front.
I'm gonna try to be super gentle so I don't break this side, but you can see it just kind of hooks
in the back. So by design, I guess it's supposed to totally come out this way. I guess you're
supposed to take off the cover, then you could take off the sides if you wanted to. At least I don't
have to take off that side. That side's already off. Well, I managed to get one screw out. They
made the screws like two inches long. It's a security bit, and you're only able to turn it
about a quarter turn each time. So it's taking a while. I guess you could take off the marquee,
but I mean, who the heck wants to do all that? I guess they want you to take this off first.
I don't know. Seems like a crappy design to me. I'm gonna keep going. I'll be back with you in a
couple hours, I guess. All unbolted. I gotta take the tube out, the whole thing. You try not to do
that because, you know, they're kind of heavy. Better if you can just take the board out. So
it should be ready to come out now. I've already got that monitor board unbolted because I was
hoping I could take the monitor board out the back, and I quickly realized that wasn't going
to happen. So it's just laying in there now. There we go. Got that out. I think I've got everything
unhooked down here, so this should come right out. There we go. Now we're gonna walk it all the way
to our little workbench. Looks like a pretty clean board. Hopefully it just needs a cap kit.
Listening to some John Connolly. Does anybody know John Connolly?
Probably nobody's that country to know John Connolly. All right, so now you guys know how
I do. I'm going to get my little workbench here, sit down like this, take this monitor board like
this. I'm going to take all these caps out one at a time, replace them. I've got caps here. They're
all different values. 1UF, 2UF, you know, 10UF, 100UF. Do it one at a time. Swap them all.
And then I'm going to reflow the video connector. I've got to check the hot, make sure it's good.
Flyback's not cracked, doesn't look like. But I'll get all that done, and if I see anything
interesting, I'll be back. If not, I'll be back either way whenever I put this monitor back in
the tube. All right, I got all my caps changed. And does anybody remember what that hippie said?
That old hippie I was talking to 25 years ago? Yeah, that's right. Power supply, power supply,
power supply. Well, the monitor actually has a power supply also. This is the power supply
section of the monitor. And if you look, it actually even looks like a power supply.
If you've ever taken one apart, a lot of you probably haven't, I understand, but
if you take a switcher apart, it actually looks pretty similar to this. So basically,
whenever it was ticking earlier, the monitor was shutting down. It was trying to start,
but it was like, hold up, wait a minute, something ain't right. And it was turning itself off,
but then it was trying it again. And it noticed something was wrong, so then it shut it back down.
And that's why it was tick, tick, tick, tick, tick. It was actually trying to cut on,
but it knew something was wrong. So the voltages run through the board and all through the caps
and stuff. And one of the caps could have been bad. I checked the hot, which is the horizontal
output transistor right over here, and it tested fine. So could have been the caps.
It could have a diode or something over here messed up too. And it still could be the flyback,
but usually when the flyback goes bad, it takes out the horizontal output transistor over here.
And since that's good, I'm going to hope that the flyback's still good.
Like I say, there could be a burnup resistor. Everything looks fine.
Could be some diodes over here, shorted. Could be this cap here, shorted. Better check that
before I put it back in. But if that's not, if that looks good, I'm just going to put it back
in and try it. Sometimes these caps, you know, you don't really change those in the cap kit,
but sometimes those will short. Again, the hot's good though, so that's probably fine.
But anyway, I'm going to put it back in the tube and then we're going to put it back in
the cabinet and hopefully it'll come on and work perfectly fine. Got the monitor board back in the
tube. I kind of just wanted to show you how clean everything was. I mean, obviously it's dusty.
Circuit board's actually really clean compared to most of them I work on. And
the guy told me this thing's been in that house for 15 years. Well,
this game's really not all that old. I mean, it's old, but nothing like what we're used to
working on. It was probably made around 2000 or so. So I don't think that monitor's had much use.
So I'm hoping whenever I put it back in there, it's going to have a great picture.
If it works, we don't even know if we fixed it yet, but camera cut off. I hit the wrong button.
We're going to find out if it works. All right, here we go. Obviously we're not going to bolt
it in yet. We don't know if it works, but let me hook it up. I got to hook up the remote board.
Well, I think somebody just came in the store. I'll be back in a minute.
Usually I like to film a lot of these before we open.
Sometimes I have to stop if it's during business hours. And Ronnie does most of his after we close.
But obviously we're open right now. And I always make sure no matter what I'm doing, I always say,
hey, how you doing to everybody through the door. That's just how I roll.
All right, so back to hooking up the monitor. We're going to hook up the remote board.
Not much room in here. You can't see nothing. You can't see it. There we go. Now I got it.
All right, remote board's hooked in, I think. I didn't miss a pin. Now we're going to video.
Now we're hooking in the next board. Now we're hooking in the power.
All right, so I've got my yoke. I got my ground. Got my anode. I got my video. I got my power.
Now we're going to turn it on and see if it'll cooperate. Dang it. Dang it. I'm riding the
struggle bus today, guys. It's still ticking. So I got to take the dang thing back out.
I may try fiddling with the high voltage shutdown pot, too. Maybe that's bad.
But I guess I can do that now. I just had to say that a 7400 was a good monitor, didn't I?
I wouldn't have said that. Everything would have been fine.
Well, I'm going to take the dang thing back out. I can't reach nothing. Can't see nothing.
I'm probably going to have to carry the dang thing all the way
back to the test bench so I can test it on the bench. That's what I should have done to begin
with. But mistakes were made, okay? Mistakes were made. All right, I got the monitor board back out.
Everything looks perfect. I can't find anything that tests bad. The caps aren't shorted. The
poly caps aren't shorted. The hot's not shorted. I don't see anything wrong with it.
So now we're going to have to do the light bulb test. I usually don't do this because I like to
cap it and try it first. And I'd say 70 percent of the time that's all it needs. That other 30
percent can be a pain in the butt, especially on one like this where you can't get in and out
of the cabinet that good. We do have a shutdown pot over here. It could be that. This chip over
here could be bad too. U701. This chip could be bad. But that's why we got to do the light bulb
test. We're going to hook up a light bulb to it out of the cabinet. I'll show you. And if the
light bulb cuts on, that's going to rule out the whole power supply section. It still could be the
flyback, but I hate to put a $50 flyback in there on a guess. I mean, I can and then I just save this
one. But we're going to do the light bulb test and then we'll go from there. We're running out
of things that could be. Flyback could be one of those two chips or the flyback pretty much.
All the caps check out fine. I checked all the diodes over here. All of these test fine.
So I have a feeling that the light bulb is going to come on and it's going to end up being either
that chip or the flyback. All right, so hopefully you can see all this. So you have to unsolder one
side of L100. Then you need two alligator clips clipped to this side. One of them is going to go
to the red lead on your meter. The other one you're just going to let dangle for now.
And then you clip another one, a third alligator clip over here to hold the black lead to this
post here because this is going to be our ground. Okay, following me so far? So we got two on the
one side of L100. One's going to the meter. The other one we're going to touch to the light bulb.
We're going to set a light bulb here and it's going to be grounded. And I'm going to touch
the end of this one and the light bulb hopefully will come on. We've got to send power to the
monitor board. It's probably going to be pretty high on the AC side. It's going to be like,
I don't know, it may be 170, 180. And then whenever we hook the light bulb up,
it should drop it down to like 126 and the light bulb come on. So there's our power.
I'm just going to plug it into the wall. This does not need an isolation transformer,
so we're not going to have that problem. All right. Let me make sure I got all this set up here.
Meter on DC. Well, good thing I looked. It's not even in the shot there. Meter on DC.
We're going to plug it in. Still ticking. So our problem probably is in the power supply section.
No light bulb. This light bulb should be coming on. That could be, that could be good. It might
be that little chip in the power supply section. So we're only getting 25 volts DC and it's still
ticking. It failed the light bulb test. All right. So we're going to change that chip and then we'll
try the light bulb test again. What do you think about that? That sound good? So my theory is that
All right. I got my chip changed. Got my light bulb. I'm getting ready to plug it in.
Hopefully we're going to have like 170, 180 volts DC. And whenever I do the light bulb test,
it's going to come on. And you can only do this if you've got that L100 unhooked. Because if you
do this with that hooked in, man, this thing could start sparking. The anode could probably
start going. Make sure you got that unhooked. Well, we're still at 25 volts. We did nothing.
Nothing. Well, we'll have to check some more stuff. This game's really getting to me now.
I'm starting to get frustrated with it. It's still broke. I'm going to keep looking.
All right. I decided to change the B plus pot because I mean, we're only getting 25
on the B plus. So I changed that. I mean, I couldn't find anything else wrong with it.
Unchained the chip. All the resistors checked out. The diodes checked out.
So next up was the B plus pot. So let's try it again. All right. So I should have like
170 on the DC. And then whenever I hook up the light bulb, the light bulb should come on.
Remember before we had 25. So hopefully this is going to do it. Yeah, buddy. 170. All right.
Let's try our light bulb. Yeah, buddy. The light bulbs lighten up. We might make that money.
All right. So now we can finally put it back in the tube and put it back in the game and
hopefully it'll work. All right. I got the monitor back in the game. Double checking everything.
I've got my yolk cooked up. I got my ground. I got my anode up there. I got my video. I got
my remote board. Got my power. All right. Try it now. Hopefully I don't get it. Sounds better.
We don't have any. OK, there we go. We don't have any more problems. Looks good, though.
Yeah, buddy. Looks like a pretty good picture. It's hard to film a CRT. Sports Shooting USA
presented by Sammy. It's a little bowed, but I think I might be able to adjust that out later.
See if it'll actually play. Ready. Stand by. Sports Shooting USA presented by Sammy. This
gun on the left, it was all taped up. I'm curious if it'll even if it'll work.
I don't have enough credits on it. All right, now let's try. It's a cool game because it's got the
it's got that little guide in there. Cross hatch.
It's more of a target practice game, so it's not that violent.
Well, this gun's broke. All right, let's try this one.
Can't tell if the gun's accurate or not.
Nope. Yeah, it's never even close. Yeah, it's not even close to where I'm shooting.
But we're not going to worry about that right now. At least we got the monitor fixed. So
now I'm going to go to Lowe's and I'm going to buy a few things and I'm going to try to
patch up my plastic disaster that happened. So I'll show you what I end up with. All right,
it's the next day. I went to Lowe's this morning on my way in. Here's all my broke pieces.
More broke pieces. I went and got some JB Weld. This is supposed to be just for plastic.
I'm going to mix all that together and see what I can come up with.
I also bought a little mini torch. I didn't have one of these yet.
My thinking was maybe I can heat some of it up and put some like metal in between it,
like some cap legs or some little pieces of metal to try to help strengthen it.
I don't know if you've seen them people repair like plastic bumpers and stuff on cars. They've
got something similar to this and they put those metal staples in there to kind of stitch it back
together. I thought I might have to do that. And this piece, you know, I thought I could heat this
up maybe and put it back where it goes. It goes something like that. It probably goes like that
actually. I thought if I heated it up maybe I could stick it back down in there maybe. I don't
know. I don't really know what my plan is here. But I think I'm gonna start on the front monitor
part because I think it's really only three pieces I'm hoping. I got this big piece. I got
the corner piece and that piece. This is just barely holding on because that sticker kept it in.
So I think I'm gonna lay that down flat somewhere and just see how it goes. I don't know. I'll be
back when I get any further. All right here's phase one. The whole thing's, you know, it's curved to
go around that tube so I couldn't just lay it flat on the plywood. I've got it lifted up here. I've
got it taped kind of holding it this way so it's twisted that way. I got it taped so it's holding
this together and then I just put a ton of that plastic bonder inside there and I'm gonna let that
sit a while and then we're gonna do the next piece I guess. One piece at a time. All right so
I got this piece back together. When I did the first piece that was knocked off I really put a
lot of this plastic bonder JB Weld in there. I got it in between the pieces. I knew it was going to
come oozing out. That was kind of my plan because some of this on the front was missing so I wanted
all that to fill in. So that basically did exactly what I wanted it to do. When I did this piece over
here I didn't put as much because I didn't want it coming out the front over here because I knew
it was going to be hard for me to get it out in all these little louvers here. There's grooves here.
So I did a lot on the back instead. So this piece actually seems really solid now
and this was the piece I was most concerned about because it was all jagged. I didn't know if I was
going to be able to get that to look okay and I think we're going to be just fine. I'm going to
take these stickers off. I'm going to sand it a little bit and then I'm going to repaint the whole
thing so it hopefully it'll all blend together. So I think we're going to be okay. I think it's
going to be just fine. So now all I got to do is glue this piece back together. There's only three
pieces in the metal bracket so I'm feeling a little bit better about it now. I'm pretty impressed
with this JB Weld plastic bonder. I mean it seems to be working really good. I mean it seems really
really strong. So we'll see. I'll be back when I get all this finished up. I don't think I'm
going to film the other section. I mean it's the same as what I did on this. I'm going to do the
exact same thing. Take the stickers off, sand it, paint it, put it back on there, and I'll be back
when I get all that straight. Well I got it all sanded down and I put some bondo on it too.
So I'm going to let that dry up and I'm going to sand it again, paint it, and hopefully it'll be
good to go. Back in the parts room. I'm pretty sure I had some of those guns. So let's take that special
clear gun. Here's all my shotguns. I got some pistols down there. These are actually ready to
go but I need that other type. So I'm going to dig through my box down here. I think I got,
I think I might have one or two if I didn't sell them already. Well I dug through the whole box
and I only had two and they're not all that great but the case is better than the one player that
I've got. The one player gun I have is all broke. The two player case I have is good but it's not
working and this case here isn't all that great. So maybe out of all four of them I can get two
working guns. We're gonna try. Boy we just had a nice guy Scott come in. He's one of our YouTube
viewers. He brought me all this cool stuff. Look at all this. He's from New Orleans.
You might have a couple of these babies for lunch. I just realized there were different flavors. I
got an apple. I got chocolate. I got lemon. I got some gumbo base. I got you slap your mama.
I got some red beans. Man thanks Scott. I really appreciate it. He's a real super nice guy. We
talked a little bit but anyway if anybody ever wants to come visit us you don't have to bring
us a bunch of stuff. Just you can come in say hello. You know we're here every day but Sunday
from 11 to 8. So if you're ever in town just come on by. You can talk to us for a little bit
but anyway back to the video. Thanks Scott. We appreciate it. All right I got the bezel all
painted. Put back on the cabinet. It turned out all right. It's not perfect. I mean you can see
where I touched it up and painted it. You can still see this crack over here because I didn't
have to deal with those grooves but I mean I didn't really have much choice. It looks pretty
good. I mean at least it's not falling apart anymore and I didn't really have much choice.
This game is not all that valuable so I don't think people really mind or even care if they
notice. So now to the guns. All four of my guns are broke so that's kind of strange. I mean maybe
I've got four bad guns but I'm starting to wonder if my gun board there is bad. I've got voltage
going to it. I've got voltage coming out. I don't know. I guess I'm gonna go get one of my other
pistols. The regular guns that I've got that I know work and I'm gonna change the connector on
it and see if it'll work. I know it's not the monitor because this monitor is pretty much
perfect. On gun games you got to have a really nice bright monitor. If you don't the guns won't
work right but that's not our issue here because that monitor is pretty much perfect. It looks
brand new. You got plenty of brightness, plenty of contrast, good color. So I guess I'll be back
with you when I get the guns figured out and hopefully we'll play a game. Well I'm having my
Cubix pie that Scott brought me. I like the lemon one. This really takes me back. My dad
would really like these. I've never had this brand before but this is stuff me and my dad used to eat
when I was a kid. He died when I was 13 so kind of good memories. He used to love these and the
apple turnovers and stuff like that. But anyway back to the video. Well I got it all finished up.
The guns, it ended up being that little gun board that was inside there. I had another one so I just
swapped in another one. Now both the guns work fine. I swapped the one player gun to one of the
other ones that was a little bit nicer. The two player gun is in good shape. So they're both
pretty good now. I did a lot of little things. I'm putting two new locks on it, put two new
coin door bulbs in it. I fixed the marquee. Changed the power supply. I had to put a new
ballast in the marquee. New starter, new bulb. But there you go. So I guess I'll set you up on
the tripod and I'll show you that everything works good on it and that'll be that. All right
see how that goes. That's the best I can do on the... it's hard to film a CRT
but these guns are pretty cool. You see how you can see the scope in there?
They're only on these Atomiswave games. All right let's see if she's wanting to work now.
Well there's some training.
That's what there's speed. See if I got those cat-like reflexes. Shooting the bull and the
squirrel. Yeah buddy. Hurry up. I had to reload. Come on reload faster. Is that it?
I can do it. What else we got?
There's a scope. Scope training. Uh-huh. You ready?
Uh-huh. What else we got? We're all skilled. Okay. I wasn't supposed to shoot those.
Yeah buddy. Well you get the idea. Everything seems to be working perfect on it.
All right there we go. I think it turned out pretty nice. Sports Shooting USA. This isn't
really a classic or anything. This thing was made in 2003 so it's pretty new compared to what we
normally get but somebody will like it. Be a good little shooting game or just a little fun little
game to play in your garage. Hang out on the weekends. It's not too expensive. This is going
to be an affordable one for somebody. So thanks everybody for watching and I'd like to thank the
guy from the church I got this from. He's a super nice guy. We've actually bought a lot of machines
from churches over the years. You know they'll get two or three for their little game room and then
you know maybe they change pastors or something and the new guy doesn't want them so we end up
buying them and we've sold a ton of games to churches over the years. So anyway that's going
to do it for this one. Thanks everybody for watching. We appreciate it. We'll see you on the next one.