https://www.youtube.com/user/VideoJoeShows How to connect 3 ground wires to a duplex receptacle is easy...when you know how. How on earth are you going to connect 3 separate ground wires to the little ground screw on a duplex receptacle or any receptacle for that matter? Ha! If you watch this short howto video with VideoJoe then you will see just how to do it! Hey if Joe can do it, so can you. Start saving some money around the house by subscribing to Joe's channel here & maybe he can help you with that! VideoJoe usually works on the ground wires first when he starts hooking up a duplex receptacle. You'll soon see why. Watch & learn as VideoJoeShows you how to connect the ground wires to a duplex receptacle outlet. https://www.youtube.com/user/VideoJoeShows
What I'm going to do here is I've got to connect all three of these together.
There's a couple different ways you could do that.
One way would be to cut three of these all the same length and then create a fourth one,
a little pigtail, yay long or so.
Bend that back and then you'd have to take a wire nut and connect all four of those
under a wire nut.
Push that in the wall so you only have one coming out.
That way you hook up that one to the plug.
But then that takes up a lot of your room and most electricians don't do that because
room in your box is what you want.
So usually what you do is you install these little ground caps and it's just a round little
cap.
Do you see that?
And we're going to connect these ground wires in such a way, crimp these on there so that
we can push everything back.
So when you're at the store, you're going to have to get a little box of these ground
caps.
They sell them in 25 or 50 at a time.
So that's how you want to get those.
I hope you can see all this because I'm right up in the corner.
I'm moving the camera over a little bit.
So we're going to just take two wires and we're going to connect those.
I'm leaving the longest one out for right now.
Let's just make believe we got two wires in here and what I like to do is do the shortest
wire because remember this wire here was the existing one that was in the outlet box.
So I'm going to work with that one first.
So what I'm going to do is take these and I can overlap them and just put a loop in
it like that.
Get it back there as far as you can.
Now I'm going to take my pliers and give it a couple little twists.
I want to keep those ground wires together, but the last thing I want is to make too many
twists in there.
Twist it, twist it, twist it, twist it.
You do that, you get it so tight.
You think, oh, this is cool.
Pretty soon you snap it right off.
We do that.
Then we're in a heck of a little quandary.
Okay, now I've got my little cap and I put it over that.
I'll push it onto that twist that I have in there.
I'm going to crimp that down on top of that and that's going to kind of help hold that.
Okay, now they got a little special tool that you can get, a little crimper tool, but I
don't have one.
That's going to work.
See, I've got some wire strippers.
Here's my wire strippers for later and some wire strippers, they've got this other little
thing right in here where this goes out further and it's a little nib so that you can put
this over that and then the nib hits that and you squeeze down on it and it puts a dimple
right in the middle of that.
Okay, but these strippers don't have that, so I can't use that for that, so I just smash
it over like that.
Okay, now I take my cutters and I'm going to cut off the shortest piece, but I'm going
to let about a half inch, three-eighths of it stick out of the one piece.
I'm just cutting one piece right now.
Now I can take that and fold it up over my clamp, my little crimper.
Okay, I take my pliers back in there, smash that over that.
That just kind of helps hold everything together.
You know, you've got to do something with that end too, plus that makes it easier.
I don't want to catch that on anything.
Okay, so now we're down to two wires.
Guess what we're going to do with those?
You're right, the very same thing.