Reconnecting "short" ground wires in a duplex box

VideoJoeKnows
63 followers
1 Video View·Jun 7, 2026
http://www.VideoJoeKnows.com VideoJoeKnows shows you how to reconnect "short" ground wires in a duplex box. It's important to reconnect the ground wires in a duplex box so you will have a proper ground for your duplex plug. Short ground wires in a duplex box?.....no problem....."VideoJoeKnows" what you should do!
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Down on my trusty knee pad. I'm sure glad I have that. Okay where these wires are
I want to get the rubber or the gasket material away just a little bit more just to see
actually I think it's going to be all right. Usually I try to cut those off further
not the actual wires but the sheathing around the wires so that I can bend these more
but these are flexing pretty good. Okay I think I'm going to leave that. Okay now what to do we
got four wires black and white a white and black you remember we got the two ground wires back
here so actually I think I will have to cut the sheathing off because I want to get to these
ground wires further. I got to put a splice cap on here and connect those two wires with another
copper wire. Okay so cut your sheathing back as far as you can reach back there you have to get
one out of the way slide this one down move my gloves so that I can get back in here. Okay I
just split the sheathing a little bit in most cases I try to cut it off but it's so far back
in there I can't really get to it but it's okay. I'm just scoring the sheathing with a sharp sheet
rock knife that way I've got more flex now I can leave that in there. Okay so that's the next step
okay I pulled these wires out straight and I've got the two ground wires back there now I need
to connect those together and I need a little pigtail sticking out. Now when we started I didn't
have any wire well you either have to pick up a little piece of wire at the store or whenever you
if you start working on your own little projects like this eventually you're going to get some
extra wire. So I saved some wire from last time here's my here's my copper wire and I'm going to
use this for a ground wire. I'm going to put that inside the box I've got this little cap here
it's called a splice cap and I'm going to put that on there like that and then I'm going to
pull those two together and I'm going to put this over all three pieces and it's kind of tricky
and then I'm going to clamp that down smash it with a pair of pliers I've also got my cutters
my strippers I can grab it and do it that way and then fold the ends over now you can do it that
way there's also one other way to do it I'm going to show you that as well. All right the other way
I can do it is take a splice nut here and I've just bent the ground wire back and I can hold
that up to the other two and I can screw this all together and I think that's what I'm going to do
for this one here it'll give me a better tighter connection okay I'm going to do that
and tighten that sucker up that way using that okay so I've got to get those down tight together
hold that there tighten those down these other wires out of my way it's hard to get in there
because usually you don't have ground wire short like that okay so I can take a pair of pliers
here and just keep twisting sometimes these little wire nuts have some tabs on there some ears and
you can take your thumbs and grab that use that but on the other chance that it doesn't you can
do this just tighten that up snug okay now that's much better check that I can push that into the
box and I can have this tail coming out of here we can use this for a ground wire I can cut that off
once you have that tight you want to check this wire that you got in there
and make sure that it feels tight and it's not going to go anywhere okay you got these ground
wires situated behind the white wires and the black wires so that when you push this back you
want to push this back to the very back of the box okay hold the other wires just get that back in
there as far as you can go okay we know that the ground wire is going to be situated to the bottom
left hand side of the box so I got it pushed in there way back in there so that when I push my
new plug in there it's not going to affect anything I got the wire nut all the way back
there now I got those ground wires properly grounded and I'm going to hook that to the new plug okay
