How to connect a ground wire to a duplex plug

VideoJoeKnows
63 followers
1 Video View·May 21, 2026
http://www.VideoJoeKnows.com How to connect a ground wire to a duplex plug is easy....when you know how. Every howto person should know how to connect a ground wire to a duplex plug outlet because every plug needs to be grounded & you want to know how to do it properly....right? Is there a right & wrong way on how to connect a ground wire to an electrical duplex receptacle? All I know is that I'm going to do it the way "joe" tells me how, since "joe knows" lol!
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Now we're just gonna work on this ground wire, okay?
Gotta get the ground wire connected onto this screw.
So the way to do that is on my wire strippers,
there's a little hole up there.
See, there's one here and one there.
Well, I'm gonna take this and stick it through that hole,
about 3 16ths or so,
and I'm gonna roll it up like that.
I can fold it over,
and that's what it's gonna look like.
That way, I can put it on this screw.
I wanna just tilt it out a little bit.
That way I can fish it under there.
And I want to put that on looped around
so when I tighten the screw,
it kind of has a tendency to wanna tighten onto there.
And the reason why I made that,
the end tipped a little bit long
so I can grab it here with my end of my strippers
and just kind of fold that together, okay?
Now, you can go ahead and tighten up this screw like that.
Taking another screwdriver just to double check it.
You can take a standard slotted screwdriver
because this screw is fit for standard or Phillips.
I try doing the Phillips first,
and then I hold on to this and do it with the standard
just a pinch, just to make sure it's nice and tight.
Okay, now I take that and flip it up like that, okay?
So that's what your job's gonna look like so far.
Next thing I'm gonna do, I'm gonna look on here
and look at these screws.
And I only need one screw on the left-hand side.
And the left-hand side is where the white wire goes.
That's the neutral wire, and that,
I don't know if you've ever noticed,
the left-hand slot is taller, is longer
than the right-hand slot.
That's where your neutral wire goes to the left.
And also on the left, there's screws on the side here,
and those are silver, silver for the white wire,
gold on this side for the hot wires.
Okay, so there's a couple little tips for you.
And I like to put, there's usually some holes
in the back of the plug where you can strip this wire
and just push it into the back.
But lots of times, that loosens up
when you're pushing it back into the wall.
And so I like to use the screws on the side.
So I'm just gonna set that up.
So on this side, one of the screws was loose from before.
I'm gonna tighten that up.
And on the other screw, I'm just gonna make sure
it's unscrewed all the way.
And there's a definite backing out,
and you won't be able to undo the screw all the way.
You'll feel tension on there,
and you know you got it out all the way.
Okay, so I'm just gonna check this side, too.
I like to have the screws out all the way.
That way, it gives me just a little bit more room
to squeeze these wires underneath those screws,
because what I do on these, too,
is I'll loop those around and fit them on the screws,
kinda like I did the ground wire, okay?
So my plug is ready,
and I'm gonna hook up the white wire first.
Let's work on that now.
