How to Repair Paint Grade Door Bottom Edge...Part 9

VideoJoeShows
86 followers
1 Video View·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to repair a paint grade door bottom edge...Part 9 is what this howto video is about. VideoJoe is now ready to remove the masking tape at the patch repair & clean up the excess door adhesive heavy duty liquid nails. Watch & learn as VideoJoeShows you the next step to his repair area at a paint grade door bottom edge...Part 9
https://www.youtube.com/user/VideoJoeShows
I guess before I do anything I probably should, you know, just wondering if I should take the
masking tape off yet or if I should cut this off. I think I'm going to try to cut this off
first before I remove the masking tape. You take a sharp sheetrock knife and see this is,
this is all, it's still pliable to a certain extent. See if I can get you in there a little
closer. Is that a little better? Now I can just carefully cut that off with my sheetrock knife.
I may have to score it a couple times. Just, you know, go nice and easy. I mean it's not a race.
We want to do a good job. Now I'm just not going to be too concerned about cutting it
perfect for right now. I just want to get the main amount off. I can just score it a couple times
here like that. Score it on the back side. That's why if you get any overage on liquid nails
you get a way better finished product. You let it dry. If you've got time to let it dry
then you can scrape it off. This is the, this is the bottom of the door so I'm not too concerned
about exactly what the overall finish looks like when I get done, you know.
Besides, I might still put some in here. I'm going to finish this off, remember? I'm going
to put some liquid nails over that when I get done. I still want to cut this off first
and see if you, if you wait, if you don't wait long enough before you cut this off,
it's not going to be as pliable as this. If you wait two or three hours, let's say, you think
that's good enough. You take your clamps off. You're not going to be able to cut this off as
easily, you know, because it hasn't hardened up yet. Okay, I guess I can, let's just clean it up
a little bit. I guess I can do that up here now that I can see what I'm doing. I still got the
masking tape up here so I want to be really careful with that because this is going to be
my finished product once I get the masking tape off, right? All right, let's get this masking
tape off. I'm kind of anxious about this. Make sure it comes off all right. I'm sure it will.
Pull this masking tape off now. As you pull it, you want to kind of pull it at an angle
to try to keep, keep it from lifting whatever you have up there. That goes for pretty much
any, anything with masking tape on it because sometimes it'll lift.
And last thing I want is for this paint to start lifting. Now this, this edge was kind of
bad. It was, it was all lifted up before so some of this paint is already, the white paint is peeling
because of that, you know? So all you can do is the best you can do. That's why I've got some paint.
Got some paint touch-up that I brought with me and I just happen to have it. You don't have any.
You may have to take a little sample to the paint store or something, you know? Because what you
want to do is get this matched up as close as possible. Now if you can't match it exactly, see
how I'm, I'm pulling at an angle. If I, if I pulled straight up, that could lift anything right here.
Do you see what I mean? If you pull at an angle, you're pulling so that you're pulling and you're
allowing that to come off this way and so that's more or less likely to lift anything.
There's a tip for you. Always about tips, yes indeedy. All right, enough of that. Let's get
this last piece off of here. I may have to wipe this down. It feels pretty good though. It's not
really tacky at all. Yeah, came off pretty clean. All right, now I'll have to kind of
play with these edges just a little bit.
