How to Repair Paint Grade Door Bottom Edge...Part 14

VideoJoeShows
86 followers
2 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to repair a paint grade door bottom edge...Part 14 is what this howto video is about. VideoJoe is applying more heavy duty liquid nails to his door bottom edge repair. Watch & learn as VideoJoeShows you what he does next on his door bottom repair on a paint grade interior door...Part 14
https://www.youtube.com/user/VideoJoeShows
Let's try that again. We'll put a little bit more on there.
Just getting it off from the tip of the gun. Like I said, you don't want to play with it too much
after. That's about it. Now if I wanted to, I'm going to try this. Getting my finger wet.
Just putting a little spit on it and knocking down the edge. Do that with your finger.
Doesn't stick. See, you did that with a dry finger. It'd be all get out. There's something
else you can do too. You can just get your tip of your blade wet, you know, with a damp rag or
something and just kind of go over that, you know, and that helps it slide a little bit easier
after you get the liquid nail on there. Like I say, you're not really going to use liquid nails,
you know, for caulking, but in this case we are. Now would be a good time to fill this in. Remember
the open pores, just on the style, the edge of the door from here down. See how that's rough?
That's the edge, the cut edge and that's exposed all the wood grains to moisture. We don't want
that because it cracked there before. Here we got a little hole there, remember, and I'm doing
this because we got the door down. I'm just going to flatten that out. Now that's cleaned up the
pores. Man, that dries. I don't think any water is going to affect the bottom edge of this door
anymore. What do you think? Looks like we got a nice little mess going on here. At this point,
I think I'm going to take this masking tape off in case it leaves a little edge. I want the
liquid nails to have an edge, you know. If there is, I might have to wipe that off a little.
See, if you didn't have the masking tape down, you'd have a big mess going on.
Doesn't look too bad. It's like there's a little bit of an edge. I may have to
see if I can just wet my finger or something and just blend that in along where the masking tape
was. You didn't know you needed to be an artist when you were doing repairs, huh? You know,
you do what you got to do to make it look right. Sometimes it's an unconventional way how you're
going to do that, right? Such as this. All right, I've got to let that set some more now,
and I'll come back and do a light sanding of that. I can't sand that, and I don't want to
paint that yet because the paint's not going to take to that. Plus, I want to slick up the
surface a little bit and a little bit of the sanding edges. The paint's going to stick better
to it, and I'll get a nice job. Hey, when you do patches, do all the steps and do it right.
