Carving for an Antique Mirror - Thomas Johnson Antique Furniture Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
172 Video Views·Sep 27, 2025
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine carves new leaves for this handsome antique mirror. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, call us at (207) 222-2266, or write us at [email protected]. And for those on the west coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson, Thomas Johnson Antique
Furniture Restoration in Gorm, Maine. I
like the nature shot at the beginning of
this video you're about to see. That's a
hummingbird moth, which I had never
heard of until I saw this one. I like
this video. Very good close-ups of the
details of the work. And I especially
like the carving videography. In fact,
some of those close-up clips, it sort of
looks like I know what I'm doing. I did
include the usual disclaimers.
When making the missing pieces, I didn't
orient the grain in the same direction
as it was originally, as that was really
the problem. I've never been sure about
that decision. Let me know what you
think. I hope you enjoy the video. If
you do, like, subscribe, share. I'd
really appreciate it.
[Applause]
I'm Tom Johnson, Thomas Johnson Antique
Furniture Restoration in Gorm, Maine.
This is a nice little uh antique frame,
uh, late Victorian, late 19th century.
It's made of a solid walnut and it's got
a real kind of a woodland motif here
with these leaves carved. And the
problem is is that uh some of the
carving is missing. So here you have a
piece missing.
I'm going to number these.
Make it easier to do before and after
shots.
This piece is broken almost in the
identical place as the other one. Right
near the nail.
This is a smaller piece.
And the fourth one is there's that's a
big piece of putty or something there.
So, it's even uh a larger repair piece
than the others.
This intact corner is a bit loose. I'm
going to see if I can get it off of
there. That'll make it really easy to uh
measure the thickness and trace the
shape.
These are tiny square cut brads. I'll
see if I can't tap them out.
Good thing I swept the floor this
morning.
It looks like 932 of an inch or 4.6 mm.
I found a nice thin piece of walnut to
scrap pile. I still got to plane it down
some.
[Music]
the original piece, the grain was
running this way. In other words, they
made this out of one piece of wood and
the grain runs this way. And of course,
that's why they broke across the short
grain. my repair pieces. I'm just going
to run the grain straight
[Music]
[Music]
[Music]
Heat.
Heat.
[Music]
Heat up
[Music]
Heat. Heat.
[Music]
I'm a little bit short in this area
here. Before I glue this down, I think
I'll try another one. See if I can get
better at finding where this joint
should be.
[Music]
Okay, that's where I think the line
should be. This time I'll cut it back a
little bit.
give me uh better chances to fit it.
[Music]
Yeah. See, the first piece I tried too
hard to cut at the right angle. Now I've
got extra wood there.
Yeah, that looks good.
Now, I like to take the ragged bits off
that inside corner.
Okay, I've got two more pieces to do and
um I'm going to do those off camera.
I'll be back to uh glue them on.
All right. Tomorrow I can start carving.
All right.
All right. Now the carving begins.
[Music]
All right, I think that'll work.
This is a good time to point out that
this is not a video about how to carve.
This is a video about me making you
think that maybe I know what I'm doing
here.
All right, this one doesn't look too bad
after the first one.
I think I should fill that gap uh before
I do any more carving.
Okay, I've sanded uh all these repair
areas with 100. Now I'm going to sand
with 150 and then 220.
Okay. Uh all sanded. Now I'm going to
tape off the frame uh before I uh stain
these.
I'm guessing it's going to be uh one of
three stains. A medium brown walnut,
medium walnut, or perfect brown.
Well, that's not bad. I could just stop
there.
This is medium walnut.
Yeah, just as I suspected. It's uh it
could be too red.
Now we'll try the medium brown walnut.
Yeah, I think the medium brown walnut is
the best one. It's got just the right
level of redness.
Yeah, I think it's going to work just
fine.
Okay, now I can glue this carving back
on.
Luckily, I have my little uh locator
pins here.
Okay, let's uh let's put some shellac on
these and see what they look like.
Uh yesterday uh yesterday evening off
camera I applied another coat of shellac
just like the first one. Now I want to
cut it back again and then apply more
shellac.
You can see how grainy it is. I'm going
to use 500 freecut paper here. I like
cutting back that graininess with uh
paper, but at the same time, I don't
want to go through uh through the finish
and to the bare wood. So, I'll do it a
little with some paper, just gently.
The paper's good for getting down into
those incisions.
But then I'll finish with Scotch-Brite
gr ultra fine gray pad
and the paper's best for the edge.
All right, it's looking good. I've let
this dry for two days. I think it needs
at least uh one more coat. So, I'm going
to do the same routine again.
Same routine. Uh careful sanding with
500 grit free cut paper.
Then a Scotch-Brite pad.
And this time I'm going to go over the
entire uh carving. I'm going to give the
the entire carved corner pieces a coat
of shellac.
I'm going to set these nails. This is
the piece I didn't uh work on, the piece
that I took off. I'm going to set these
nails. Uh check any other nails.
I'll fill those holes with a rubin wax
stick
on this one.
This is my joint. And I've got a pretty
good opening there. And a little bit
there. And a little more there. I want
to fill those in with something that
won't shrink back. I'm going to use
shellac sticks.
Let it cool down and then I'll sand it
with a little 500.
Okay, all the carvings are braided. I'm
gonna just give them a quick wipe of the
uh Mohawk uh wax wash remover.
It just helps to remove any
contaminants.
This is the largest uh piece that I
carved.
This is this is the smallest piece that
I carved.
Okay, I've let this shellac dry for
about six days. Uh, you know, we all
know shellac's a fast drying finish, but
you really need to give it time to to
truly uh dry.
As you can see, the shellac is very uh
high sheen, and we need to cut that back
a bit.
I'm going to use a combination of pummus
and this uh orange oil polish.
I typically don't measure, but I am for
the purpose of this video. I'm going to
use about a half ounce of this beeswax
orange oil polish.
That would be about
15 milliliters.
And I'll use uh a/4 teaspoon
or about 2 and 1/2 g of this 2F pummus.
I'll use a stencil brush.
Yeah, that cut the sheen down nicely. I
hope you can see the difference between
this sheen and that sheen, which I
haven't rubbed out yet.
Okay, I think I can go ahead and and do
the rest of the carvings.
[Music]
Okay, now I'll go over the rest of the
frame with a little bit of the or orange
oil and beeswax polish and some four
steel wool.
So,
here we are. A nice little uh Victorian
frame uh late Victorian late 19th
century, early 20th century. And um all
that was wrong was there were some
pieces of these carvings missing. and I
put wood on there,
carved them out as best I could. So,
I've got about six hours in this job. I
used the table saw, thickness planer,
band saw,
and these hand tools.
Here's the first one.
Here's
the second one.
Here's the third one.
And the fourth one.
I think it looks pretty good.
Let's try something here.
