Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
AI Generated·May contain errors
Ladies and gentlemen, this is Joe's Classic Video Games
back with another cool arcade repair video for you this evening.
This is an Allied's Paddle Battle.
What a cool game.
So it's a Pong knockoff, basically,
that we picked up a while back.
We got it at an auction pretty cheap.
It's been sitting around.
I don't even know what's wrong with it.
We haven't
plugged it in or anything.
I think maybe it halfway works or something.
But we're going to fix it up and put it up for sale.
This is from that really strange time,
right at the beginning of the Pong
or, you know, a year after the Pong craze
where all of these other companies were ripping off the same idea that
that Atari or, you know, that they had came up with for Pong.
And they're all kind of the same game.
But there might be two paddles instead of one or whatever.
And this one has some interesting little controls on it
where instead of a knob, there's a knob on the side.
I think it's supposed to be like that.
There was a time period, just a short little period of time
when they thought that video games were all going to be Pong.
It's hard to understand that.
But basically, they thought that
they were just going to keep making the same exact game like pool tables.
So pool tables are pretty much the same billiard tables,
pretty much the same that they've been for a very long time.
So they thought that video games like a video game was just Pong.
So it's you playing tennis on a video screen and that that was the new hot thing.
And that's what everybody wanted to do, just like everybody wanted to play pool.
So, you know, you need 10 pool tables.
They thought you needed 10 tennis games.
And that's that's just how it was.
So this is from that that little bit of time.
Let's see if we can find a date on it.
Anywhere says Allied Leisure Industries
Incorporated, Hialeah, Florida, USA is no date.
Maybe there'll be one on the board or something.
She's locked up tighter than a drum.
It's got the cool wood grain cabinet.
It's a little shorter than later games like Miss Pac-Man.
That is also let me go show you.
This is an Allied Leisure game up here, too.
I'll show you it.
We'll be working on it eventually.
This is Allied's street burners.
And that other one's about the same height.
So it's just it's maybe actually I've got a Miss Pac-Man over there.
Don't a couple inches, maybe three, four inches shorter than Miss Pac-Man.
So that is today's game that we want to mess with.
So like always, first thing I'm going to do is take the back door off
and look inside of it and see what we're working with, see what's rolling around
in it, make sure nothing's
going to burn up whenever we plug it in and we'll go from there.
Got the door off.
I didn't mention the date.
I'm going to guess 74 or 75.
What in the hell have they done to it?
They put a damn LCD in a freaking.
Oh, my God.
This is like a horror movie.
Come on.
How in the hell is that working?
God, why would they do that?
Well, we'll have to decide what we want to do about that.
So there's the original board.
It looks very similar to a pong board.
Pretty, pretty obvious copy.
That kind of to me, I'm not real educated on the pong boards,
but that kind of looks just like the pong board.
Like it's a one for one copy.
OK, well, damn, they took out the freaking monitor.
A lot of these I don't know about this particular one,
but a lot of these would actually have just a TV in it like a black and white TV.
So I'm sure it stopped and they didn't try to fix it.
They just hacked in the new thing because, you know,
everybody wants to play the old game on a brand new TV.
I don't know what the point is.
Like if you why even play an old game, if you're going to play it on a new TV?
I mean, I don't get the point.
I'm going to have to think about this.
Here's a list on the killer list of video games of what they call ball
and paddle games, and it says non breakout.
Just they're they're trying to basically say pong style games.
And they've got a few that actually say 70.
So I don't know.
Maybe pong wasn't the very first one, but you've got pong here in 72.
You've got computer space ball by Nutting Associates.
You've got Pong Fun Games by Fun Games Inc.
I don't know.
Barrel Pong, Coop Davis, which is Pong Doubles, Dr.
Pong, Ellie Pong, Handicap,
Hockey by Ram Tech, we actually had one of those.
Leader by Midway,
Paddle Ball by Williams.
And then you had Paddle Battle by Allied Leisure, which is this one
Pong Doubles by Atari, Pongtron, Pongtron to Rally, Snoopy, Pong, Soccer,
TV, Tennis, Table Tennis by Nutting Associates,
TV, Ping Pong by Chicago Coin,
TV, Ping Pong by Amutronics, Volley by Ram Track, Ram Tech,
Winner, we had one of those two, Winner Two, Winner Four,
Challenge, Clean Sweep.
And so you can see 73 was the year of the Pong clones.
Club Tennis, Countdown, Crazy Foot, Elimination, Flim Flam, Fun Four,
Inca Balls, Pong Hockey, Puppy Pong and Quadra Pong.
I think Quadra Pong was about the end of it in 74.
So if you look at all these, almost all of them are the same game.
They're very similar.
There's a bunch that I'm aware of that are not on here, too.
So there's a lot of they made a ton of these things.
So here is our Paddle Battle.
That was Allied's first Pong style game.
Allied, this is what this is one we've got.
Allied's biggest secret is out.
There's no competition, just money, money, money.
Right. OK, so then Allied did Super Soccer, Allied Super Soccer.
We've teamed up and you'll own a champ.
Captain number one. Captain number two.
Look, you turn that and they all move.
Features front access to video.
Large 22 inch play field.
One year warranty on the board.
Adjustable 11 or 15 point play.
Twin shoots optional.
And then they made Allied's two or four player tennis tourney.
Two players for a quarter.
It's an experience.
Four players for 50 cents, both front and back court play.
So now there are four little paddles on the play field.
And then they came up with this hesitation.
So hesitation is a little more creative.
So you got four paddles
and it's like it's bouncing off the walls and I don't know how you score.
I guess that's something to do with that thing in the middle.
This is super rare, super duper rare.
So this is in that weird period of time when they were all coming up
with variations of the exact same game, which is cool to me.
I think it's it's awesome, man.
I like playing pong
and I certainly like fixing them.
So but just if you look at the paddle battle listing,
not paddle battle, what's the one that we're messing with right now?
Yeah, paddle battle.
Click the wrong one.
If you look at it, it confirms that it had a TV monitor,
a black and white TV monitor.
And then if you look at the schematic, I mean, not the schematic, the
flyer, it doesn't really mention what size it was,
but it shows what appears to be a TV monitor.
And we know that there wasn't a damn LCD in there because they weren't
even invented yet.
So it's just a black and white TV set.
Basically, they hadn't started making,
you know, on our video that we did on
Tornado Baseball Cocktail, the video we did on that.
We kind of looked up the midway
for the Motorola XM501 monitor that came out in 1974.
Apparently, that was one of the first monitors
specifically for arcade games.
Before that, they had televisions in them,
which we also know because we've worked on some pongs here on our channel.
So if you haven't seen those, go check those videos out.
So it originally would have had some kind of black
and white television set in it, and that must have crapped out.
And so they somehow hacked in a LCD
and they use those damn connector thing.
Look at this crap.
This is the work of Satan.
These are these.
Good God almighty.
Huh? Lord, the hell.
I don't want to touch it.
I might get infected or something.
OK, but you know what?
We're going to have to do, people.
We're going to have to test them with the damn LCD in there, at least
to see if it does anything.
So I'll find a power cord and plug in.
They even hacked in.
Oh, good God.
The crap won't end.
I'm going to call my congressman.
It's got to be illegal.
Didn't even hear a monitor come up because it's got some new type of.
Oh, hell, they put an LED.
Oh, God, I don't know if I can handle this, people.
I think there's a freaking LED light in it, too.
Good God.
Well, surprise, surprise, it ain't doing nothing.
I wonder if this button is they've rigged it up for something.
There's nothing here.
There's like there's nothing left.
So the power comes in here.
Look at this.
And it runs into here.
What in the hell?
That better be original.
Uh, well, I'm not impressed so far
with their hackage that runs to the monitor.
I mean, to the freaking Wago.
I'm never going to do it, people.
I am never going to start using those.
Yeah, I don't know.
I don't know if the monitors on
contains mercury lamps dispose of properly.
At least it's an older one.
I kind of like that.
It's a Sanyo.
OK, well, I don't know what's going on.
We don't I don't believe there are schematics for this.
The last one that I fixed that was similar to this,
I just used the pong schematics.
But luckily, it's simple enough that you don't really need
schematics for the cabinet wiring.
So let me see if I can figure out if the TV is on.
You don't really have any way of knowing.
OK, so. Hmm.
Yeah, I got to figure out if that's getting power.
Now, I don't want to hear any of y'all ever, ever act
like we half-ass stuff again.
Look at this.
Come on now.
I don't know how you turn the damn thing on.
The power button on the side.
Oh, here we go. We got power.
There it is.
So they had this mounted in there
where this player, the paddle
probably isn't even on the screen and this player,
the medium, the net is all the way over here.
Oh, maybe that's the paddle.
Unbelievable.
Well, I guess I'll plug the control panel back in and try to
we'll play this classic.
All right.
Maybe there'll be a board fault so we can
feel like we're doing something useful.
There we go.
Got you, sucka.
Next. Oh, deal with it.
The pot ain't working great.
The pot ain't working, period.
It's coming back.
Maybe a little contact cleaner.
This guy, he's got no skills for me.
Now, if I remember correctly.
Oh, got you, sucka.
Deal with it.
If I remember correctly,
it does display the net
slightly off center from the original board and you adjust it out with the
with the controls on the TV.
If I remember correctly, I seem to remember something about me
trying to get it centered, having all kinds of issues.
You know, well, I hit the wrong channel.
I mean, the wrong button.
You've got to be kidding me.
All right, maybe there's a way to get us back to the input.
Hmm. I might have screwed it all up by hitting the freaking channel button.
Wouldn't that be a shame?
Now I got to play this game.
You would think it would be on channel three or four,
but isn't it plugged in with the AV?
I wonder how you
wonder if you need the freaking remote.
What a piece of junk.
I mean, what the hell are they thinking?
Why would they why would they do this in the first place?
And then why would they mount it so crooked in there?
It's just half assery.
You know, I guess they figured they'd get an extra 20 bucks
because they they put a better monitor in it or whatever.
You could have just sold it broke and probably got more money
than this crap.
Um, OK, so let me see if I can figure out how to get it back on the video signal.
OK, so I got it back.
If I went all the way through the channels, the next time I went all the way down,
it had the PC and video selection, so didn't need a remote.
But I can't get in the menu to like move that over or anything.
If you look at this bezel that's on here, it's real thin here and it's real thick
here. It's still not enough to cause this crap.
But I mean, you see the lines nowhere near close.
But the reason for that is probably because it had a TV set in it originally
and it probably had knobs on this side.
That would be my guess.
But I don't know what set would have been in it.
I wonder if I look around at some allied.
Some more allied flyers or something, if they'll mention something about
or somebody's worked on maybe a different allied
game from that era that had a set in it and we can see what they were using in it.
Well, the manual for it is actually on the killer list of video games, so that helps.
So it says Paddle Battle Cabinet for Hitachi TV,
Paddle Battle Cabinet for Sylvania and GE TV.
It will probably be kind of hard to find the actual set that was in it,
but maybe we can find something similar.
I mean, any set would work.
Obviously, they're using a piece of crap
LCD screen from 2001 to run it right now.
So literally anything will run it.
So we should be able to work something out.
All right. So it shows us this kind of setup.
So there's the power coming in.
There's a fuse.
I think that's on the side of the cage in the back.
And then it runs into a 24 volt transformer.
There's another fuse on the other side of it.
When you hit the coin switch,
it increments the total play meter and then it turns on the coin relay.
The same power comes down here
and runs the lamp up the top or did.
And then it runs through another fuse and it runs into that little board
that is above the board, which has two
point zero one UF capacitors or three.
It's kind of strange.
It's like across the line, one and a line to ground one on both sides.
And then it runs to two through two chokes.
I guess that's what those are.
There's a point four seven
UF cap on the other side of that.
And then there is a plug for the TV outlet.
So I guess this is just a line filter
and the TV plugs in there and then it runs into another transformer.
And on the other side of that transformer,
you get the power for the control board.
It doesn't really tell us what voltage that is,
but that's how they've got it.
That's how they got the AC cooked up.
And so that's three or four different diagrams.
And so this one shows that it's center tap 16 volt AC that's running it.
And then they're using a rectifier or something,
I guess, to turn it into probably five volt on the board.
OK, so they don't actually show like the rectifier
and all the stuff they're doing with the voltage on the board,
but they do show pretty good detail of how everything else works.
So I guess they just expect that if you're working on it,
you know enough about it that you can figure out the power.
It's not that big of a deal.
So they're showing you like some scope presets and then the
the clock signals
and then what what you should expect.
OK, and then this is the horizontal time slot for the paddles.
They're kind of showing you what everything does.
It would be a little, little, little complex for me, but if somebody
was into, you know, hardware at that time at all,
they would know exactly what all this means.
So they're showing you that this creates the width of the paddle.
So, you know, if you have a problem with the width of the paddle,
you look in that area score circuit.
They're showing you exactly which output creates which segment of the score.
Horizontal and vertical ball motion.
This waveform changes to bottom waveform when ball is in the right
third of the screen, half of the screen.
This waveform changes to one of the three shown while ball is on the screen.
Low when game is over.
Ball blanking flip flop in the vertical ball motion.
Ball and paddle coincidence.
Speed change.
The ball speed up flip flop goes low after 12 paddle hits.
Goes low after four paddle hits.
This is probably just an almost exact copy of the Atari version.
The net, the width of the net.
The dot spacing of the net.
Vertical time slot for paddles.
Runs into a 555.
Well, that's right.
There's an adjustment on the board, the 50K trim pot there.
I think that controls the position of it or it may be the the range of it.
Paddle height is 15 lines.
And then the ball and the net and the right and the left paddles.
Run into F.
So in other words, it just shows you how every little thing is done.
There's some there are some documents floating around on the Internet
where people have reverse engineered the Atari version
and just they know every little thing about it, like what every pin does,
how you fix this, how you can fix that, how you can mod it, et cetera, et cetera.
There's just interesting stuff.
OK, so if you look at a few of the newer ones, like the next game,
you know, it was made like a month or two later.
It says on the flyer, large 22 inch playing field.
Now, remember, this one is the very first video game that they made that Allied made.
So the one the next one says 22 inch large, 22 inch playing field.
They're talking about the size of the monitor.
And then in the parts manual, it says 22 inch table TV Sylvania.
So ours didn't say that.
Our said I can find it again.
Paddle Battle Cabinet for Hitachi TV, Paddle Battle Cabinet for Sylvania and GE.
So obviously they're just putting whatever they want in there.
Right. And so I looked at a bunch of pictures of old televisions
and they hardly ever had the knobs on the left.
Almost all of them have the knobs on the right.
So I think I've got that backwards.
The cut out on the front.
I was thinking that they were trying to hide the knobs,
but they're probably trying to make it a little more accessible
to get to the knobs if you take the front screen off.
And it actually mentions that in the manual here.
Let me see if I can find it.
Television connections and controls plug power cord in the control chassis
and connect the shielded input wires, activate coin switch.
Note remove front panel for access to television controls.
So, you know, obviously that's how you would get to them.
But I think they've went out of their way to make it
where on the right you can get to those controls a little bit.
So if you look at it, I think it's so they're just blocking
blank space over here so that you can't see into the cabinet.
And over here, because of the way the television's mounted,
the controls are here and the screen maybe starts about right here.
Ironically, similar to how they have this,
the screen maybe starts here and runs to here.
So maybe that's what they were trying to do with this.
They still didn't get it centered, right?
It would have been over a little more that way.
And notice how the ball, the net is not centered with the logo.
So it's not centered in the middle of the screen.
Like I said, I believe I ran into that before.
This is the wrong monitor for the game,
but we had the same problem on the last one, I believe.
It's hard to get it all centered to get the line centered.
So if you look, it's centered.
It needs to come over just a little bit more.
I could move the whole monitor, but if I do that,
I mean, you'll see this side of the frame and all that.
And if you look really close,
there is a dotted line right here of Burnin'.
That's where it's been.
There's also a dotted line right here of Burnin',
which is about where it needs to be.
So I don't know if that was from whenever it was in a different game.
It may have actually been in a different Kong style game before.
So I don't know. We're still messing with that.
Okay, so that was a little video showing the problem
that I ran into on an original Pong cabinet
that would have came out the same year, just a few months earlier,
and how it didn't center right on that either,
but you can fix it.
People smarter than me have figured it out.
So I am on pong-story.com, pong-story.com,
and there is a document here
that tells you every little thing about the board, like I said.
Note, these modifications are suggested
for those building new TTL Pong games.
Given that Atari Arcade Pong boards are becoming rare,
do not damage them with modifications,
unless absolutely necessary.
They should be preserved for future historians.
Well, this one's not an Atari one,
so we're going to go ahead and mod ours, I think.
This section addresses various cures
for some of the original game's problems.
It should be pointed out that in the scheme of things,
these five problems were not too severe
and do not reflect negatively on the genius
of the game's overall design.
Also note, in any of these circuits,
if a connection is shown to positive,
then this means it's connected to five volts
via the common pull-up resistor on the PCB.
The problems are,
now these are the known problems with Pong boards,
and this is a copy of the Pong board.
One, the picture centers to the left,
making the monitor horizontal hold setting difficult,
especially on mine, because it's a damn LCD
that doesn't even have a horizontal hold setting.
Don't get me started again.
Weak net signal in later PCBs.
Ball video signal appears in blanking,
upsetting the monitor's sync a little at times.
So yeah, so basically the ball bounces around on the edges.
I'm going to leave that alone.
All I really care about is getting it centered.
The bat paddle range is limited, frustrating some players.
There is a hole at the top of the screen,
and maybe at the bottom of the screen,
where the ball can slide right by your paddle,
frustrating some players.
These players that are frustrated by that are maniacs,
because it's part of the game, folks.
If you got to hit it just right into that corner
to get it by the paddle,
if that's how both sides are designed, what's the problem?
That's part of the game.
Even if it's how just one side's designed,
you should be fighting your friend to use the correct side.
I just don't understand people.
People do this on pinball all the time.
They get pissed that the ball goes down the left out lane.
It's supposed to go down the left out lane.
That's why there's an out lane there, so the ball can go out.
I just don't understand people.
We'll get people that put a rubber ring around the out lane
so that the ball can't go out.
What the hell?
It's part of the game, people.
Come on, folks.
We ain't fixing that damn paddle range.
Ball latches in vertical blanking.
I think that was the ball can get stuck every once in a while.
It'll get stuck at the top of the screen or something.
Or I could have been, my last one had a problem
where the ball was getting stuck.
Okay, blah, blah, blah, blah, blah, blah.
Before making any modifications, it is useful to note
that there are a number of unused gates and flip-flops
on the original PCB.
So there's a bunch of extra ones.
Okay.
This picture centers to the left of the monitor.
The horizontal sync pulse in the incorrect position
within horizontal blanking time.
The problem was fixed in Pong Double as a four-player version.
The original Pong E horizontal sync pulse timing was as follows.
Industry standard video was here.
Pong was here.
Look, they screwed it up.
Two possible options for Pong, A or B.
Whatever.
The original Pong sync was displaced to the right
in the blanking interval compared to the standard video sync signals.
This means that the central part of the video image, i.e. the net,
was closer in time to the sync pulse.
Therefore, the net and screen images was left shifted.
This could be compensated for by adjusting the horizontal
hold control on the TV.
Unless somebody's put a freaking elf...
I'm gonna stop.
Due to the horizontal flywheel circuit in the monitor's horizontal hold circuit,
turning the horizontal hold control results in right to left shifting of the image.
However, when this is used to center the picture,
it is more likely the set will go out of horizontal hold at times.
That's true.
Whenever you get close to the edge, that thing will go jagged on you.
In Pong Double's, Atari had modified the horizontal sync circuit
to this version while giving the timing option A in the above diagram.
There were a number of unused gates in original Pong
and it is possible to use some of the original unused gates
to get the same result as option A.
The spare XOR gate is used as an inverter.
This is what you want right here.
See this?
This is what you want.
Other variations included one by Allied's Paddle Battle,
which was found wired as a factory-looking modification.
Now, if it was a factory mod, what does that tell you?
It tells you that some of them were not modded
or they would have made the board that way.
It's found that wired as a factory-looking modification
giving a broader-than-standard horizontal sync pulse
starting right at the beginning of vertical blanking.
The Allied modification, although a non-standard horizontal sync pulse width,
does give improved picture centering.
A variant of this is probably the most simple option of all.
However, the simple version above can result in overcorrection
moving the image a little too far to the right.
Okay?
So they're telling you how to fix it.
So you use one of the spare 74107s.
You jump over the 32H signal, the 1H signal,
and then you get your horizontal sync out of that.
All right, so I'm going to have to figure out how this is done
and then we'll probably do it.
All right, so here is the board.
Now, for you long-term viewers, I have a surprise.
Those of you that have been watching for eight years
or something like that,
some of our stuff we fix and then we end up keeping for various reasons.
Something will be going on, et cetera, et cetera, et cetera.
So I actually have another paddle battle board right there.
It's the exact same board.
Well, not exact same, but it's a very similar board.
This is the one that I bought for that winner.
I've got a Midway winner pong game as well,
and we fixed it all up and we had a problem
where the monitor was jumping or something like that.
So instead of putting an LCD in it and ruining it,
so we kept it around for a while.
We just haven't been working on it.
So we need to we need to get back at it,
but this is the board out of it.
You can see paddle battle paddle battle.
Now this one has these little things here,
but maybe we can figure out what that is finally.
So on this one, it is the fourth chip up.
What's that chip and that chip a 7427
and they have replaced it with 7425.
So what are they doing folks?
So we always wondered whenever we worked on it before
if that was let's see what gets a 7425.
They've got it in the second.
I got it in that 7427.
Okay, so it looks like they're replacing 7427's
with two 7425's.
So I saw that whenever we worked on it back then
and I didn't know what they did.
So I couldn't tell if they had changed this to another game
or if it was actually pong.
Of course, eventually we got it up and running
and it was just it's pong.
It's you know, it's the same thing.
So let's see if maybe two 7425's makes one 7427.
Okay, so theoretically the original chip would have been a 7427
and it has three inputs to one output
and it's got three packages in it.
So you could I don't know why they would do it.
I don't know if they were changing the you know,
there's no jumpers or anything on the board.
So I don't know but a 7425 you have four inputs.
You have a strobe and you have an output
and there's only two of them.
So you would need two chips to have three of them.
So it could be it could be that they ran out of 7427's
and so they've used two 7425's and a little board instead.
Seems like a lot of work,
but it also could be that they were running an extra
they needed the extra input
or they needed to turn it on and off with the strobe
for some reason.
I don't know.
There's no hacks on the board.
It's just on that part of the board.
I should say it's just put on a little breadboard
and puts in the original footprint of the 7427
which usually means that it's something that replaces that chip.
So I don't know.
I don't know why maybe there was a shortage of 7427's
and they were just forced to do it or something.
Okay.
So this one doesn't seem to have any kind of mod on the board
and I think this might be the serial number 606.
This one says 1948.
There are a bunch of little markings here too
that say 65, 43, 48, 34, 49.
That's usually like inspections
where they're basically quality control
and you see a similar thing on this one.
14, 41, and 49.
Yeah, so see 49 right there.
It's kind of faint.
And then he's over here too.
So maybe it's the same person
and then there is a number etched in it as well.
121 on this one and 2154 on that one.
So that might be the serial number, who knows.
So this one does have a bunch of mods on it.
I don't know if I did them.
I think I probably did.
There's about five different.
I didn't do these caps here.
I think there's about five different mods
that you can do to fix those things
that we were just reading like the paddle height
and all of that.
And I think I did that probably in that previous video.
Yeah, so that's what's going on.
So we're going to do one of those mods,
the center of the net mod on this one though.
And you know, the guy was just making a good point about,
you know, don't alter original boards
and all that stuff because they're historic.
Well, the allied one's not going to be as historic
and apparently they were doing it as a mod at the factory
just after a while.
So there is a resistor on the back,
but that does appear to be a factory mod
because it's on this one.
Blue-gray-brown, yellow-purple-brown.
Look folks, don't have to be exact.
So let me think.
So that's probably a 47 ohm, 470 ohm,
and that one is a 680 ohm.
But that's in the audio section.
Well, actually, that's not the audio section.
Those are the things that control the potentiometers.
So whatever. It's original.
It was already there. I'm not going to take it off.
The capacitors, since the thing's working,
I'm not going to mess with the capacitors either.
One of the problems you run into on these old
discrete logic boards like this,
they don't have a computer or ROMs or anything,
like a CPU or ROMs or anything.
This is the CPU. There's no program running.
I mean, there's no other way to explain it but that.
So because of that, if you do something like
change a resistor or change a cap,
you're changing part of how the program runs.
If you change a chip and you use one
that's a little faster or a little slower,
you could change how the program runs.
So they rely on the flaws of the chips
to create some of the way the thing works too.
Now, again, I'm not an expert on it,
but that's how I understand it.
Okay, so let me see how to do that mod
and then we'll go ahead and do that
and then we'll put it back in the game
and we'll see if it centers it
because we're going to have that problem
if we do replace the monitor.
But maybe we can get it centered
along the piece of crap, piece of junk,
plastic that shouldn't be anywhere near my baby.
God, I can't believe they did that.
I'm going to go track this guy down.
I think maybe his name is Jeff.
All right, so here is my mod.
I took notes off a lawnmower or it says lawn tennis
or something like that is the name of that file
on pong-story.com, pong-story.com.
So you can use D9 because pins 1, 2, 3, 4, 12,
and 13 are not used on D9.
So you run F9 pin 8 to pin 1 of D9,
F8 pin 12 to pin 12 of D9.
You tie pin 4 of D9 to ground.
You run pin 8 of F7 to pin 13 of D9.
And then finally, the trickiest one,
the output of that is now your new horizontal sync.
So you need to get rid of your old horizontal sync.
So the old horizontal sync comes from H5.
It comes out on this trace right here,
comes out of a pin here, comes on this trace.
It comes up here and it runs into,
it starts splitting, it goes about three different chips.
And so I've cut the trace just slightly
with a razor blade there so that if somebody,
maybe in, you know, a hundred years from now,
they'll be cursing me like I'm cursing that guy
that put the freaking...
Maybe they'll be saying the same thing.
And if they are, they can take all this loose
and just reconnect the trace there.
That's the only mod to the board that I actually did.
So the other signals that you're getting are the 64H,
the 64 horizontal clock frequency.
And I left it where it is.
I just grabbed it and put it over to that unused chip.
And then the 1H frequency, I left it where it is.
I just grabbed it and put it over to that chip.
Added the one ground and then the 454H,
which is the sum of all of the horizontal sync
or frequency signals, the clocks.
I just grabbed it and jumped it over to pin 13.
So the only thing that I actually modded
was I cut that trace just barely.
And I didn't even, like I folded the metal back on the trace.
So if they want, they can lay it right back down.
So we'll pop it in and see if that moved our net
to the middle of that freaking alley.
I can't believe they did.
Looks pretty damn centered to me.
What is, did we determine that was the,
does that go away when I, yeah, okay.
Oh, maybe that was a, maybe it's saying 10 or something.
I don't know, whatever.
Looks like once you started, it's all right.
So this pot is junk.
Might be all right if we just spray
some contact cleaner in there.
It looks like it does have the range.
This one over here is much looser.
Looks like it needs a little cleaner too though.
Oh, that didn't work right, did it?
Missed it.
I can't go that fast.
Oh no, not again.
Seems like it's correct.
Getting a real battle going here.
All right, so obviously I need to work
on that potentiometer next.
All right, so here's the potentiometer.
I'm gonna spray some contact cleaner down in there.
It's a 5K pot and it's pretty much sealed,
but there's a little hole there.
Watch this.
So you have access to the inside of it
if you spray some cleaner in there
and then just move the pot around, it'll clean itself.
So if you noticed, it was kind of disappearing.
The paddle was disappearing or not disappearing,
but making where it wouldn't move.
It's because this one wire is touching,
but not soldered to the thing.
The solder joint is broken,
which I may have done when I removed it or something.
But that's gonna be why it doesn't give us the full range
or sometimes it doesn't move.
So I'm gonna re-solder all them and clean them
and then spray a little on the shaft as well
so that it makes sure it turns nice and easily
and that should fix those up.
It usually does on most potentiometers.
Okay, so I'm cleaning off the back of the bezel
so we can put it back on and I noticed
that there is actually text on the front.
I didn't see it before.
I don't know if it's painted over or something
or maybe it's just so dusty that you can't see it.
So we'll find out whenever we install it.
I don't know.
You can barely see it.
That is really strange.
I wonder if the thing, I wonder if it's just faded.
Maybe it was red or something
and it just faded over the years.
Let me see if I can find some pictures of some more of them.
So here's the flyer again.
You can't see it on the flyer.
Here's a picture someone took of one
and you can see it on there but just barely
and then here's a picture of one up and running
and yeah, you can see it just barely.
On this one, you can see too,
it appears that there might be an open frame tube in there.
So maybe they put a, you know,
one of the early raster black-and-white arcade monitors
in there at some point.
That doesn't look like the edge of a TV case to me,
but maybe.
All right, folks.
So I moved the monitor over a little bit just to center the net
so that you can, so it's centered
and I moved the light behind the marquee
so that it lights it up evenly.
You can see the light is shining down on the monitor.
It needs like a paper shield over it,
which there was one originally,
but they ripped it off whenever they took out the TV.
There's a bracket there that must have something to do
with securing the TV.
There's a board here that must have something to do
with securing the TV.
So, you know, if you put a piece of cardboard there
over the top of the monitor,
it wouldn't have that band on it.
The bezel itself is very cloudy,
so you can't even see the monitor that great
even with that light block.
So I think, you know, this thing is really unsellable
without putting a TV back in it, I think.
I may put a color TV back in it.
They're just a lot easier to find than black-and-white TVs.
We haven't completely decided yet.
On one hand, the original TV is missing,
you know, so there's...
I guess that's why they mounted it sideways.
If you look with the light shining on it,
you can tell that it's shifted that way,
but it's just because of the way that's blocked off.
Yeah.
Well, that's where we're at.
The pots move well now.
There's just a lot of work for a black-and-white raster game
that's not even the marquee one.
You know, like the one that everybody would want
would be the original Pong.
There's probably not a ton of people looking for Paddle Battle.
However, I feel confident that if I can get the thing working well
with a better display that's nice and bright
that you can see well, that we'll be able to sell it.
Somebody will want it because it's a Pong clone.
So there's where we're at so far, folks.
I don't know when the next video on this will come out
because we have to source down a monitor,
track down a monitor, and then we're going to,
it'll probably take me a while to figure out
how to modify the video circuit.
You basically have to put a wire inside the monitor
to connect the video into the correct spot
and the audio into the correct spot.
It kind of shows it on the schematics in the manual
of one of the other ones on that,
whatever the one where it was saying,
you get to play from the back or the front,
whichever one that one was.
It kind of shows it on those schematics,
so I'll probably be able to figure it out.
But I've got some monitors in storage, too.
So I've got some color ones
and I've got a couple black and white ones, I think.
So I just need to look and see what I've got
and see what will fit.
This case is 24 and a half inches wide.
So I would prefer to have a Sylvania, a GE,
or a Hitachi from the 70s.
But if I can't, I'll just put like an 80s color one in there.
Another issue with that is a lot of the 80s color CRTs
are getting very expensive,
like a nice 80s one with the wood grain siding and stuff.
The thing's worth 250 bucks now.
If you didn't know, now you know.
But we've got a few things like that sitting around
and I got to think if I want to put a $250 monitor in this.
I could put just a CRT that's like a, you know,
like a 90s or 2000 piece of plastic.
What do they call them?
Black plastic, black piece of plastic,
gray piece of plastic, whatever they're called.
I could put one of those in there
and just hook it up the way it is now with the RCA cables.
But I don't know, we'll figure it all out.
So we're going to do another video on this eventually.
I don't know that it'll be in three days.
It may be. If not, we'll see you in the near future.