Giveaway info! - Free to enter. - Open to USA residents only (Sorry, legal issues otherwise). - Winner gets a box of FULLSTOP closed cell hybrid spray foam insulation from @beestusafullstop. - This giveaway is not affiliated with YouTube in any way.
HOW TO ENTER - Leave a comment tagging @beestusafullstop with the hashtag #FULLSTOP and tell them how you would use a box of spray foam. You must use the hashtag or your entry will not be found by the random comment generator.
To fairly and randomly select a winner, I will screen record using a random comment picker tool and publish it in an upcoming video. The giveaway ends March 25 at 7PM central time.
PP03 is supported by Timber King sawmills. For more information on my 1220 CRZ mill
or one of many Foley hydraulic options, go to TimberKing.com. Today is the last installation
day on the apartment and we have a giveaway to announce, so more on that later. But first,
let me give you an update on where we are with the apartment. Bathroom doors are temporarily
installed. I say temporarily because they have to come down in order for me to do the
v-groove, tongue and groove, all the way around on the inside of these walls.
And I'm waiting on the stairs or the steps until I get that done as well. I put some string lights
up in here on that secondary switch. Remember that one I talked about a couple times? And it just
makes less obnoxious nighttime lighting. It's just a completely different vibe at night when
those are going and you're winding down for the night versus really bright lights. And we did the
same thing here in the bathroom as well. As you can see, I have a mini split installed. That was
$1,200. Just check the box. 12,000 BTU for less than 400 total square feet. It's just mounted in
the bathroom and it's going to serve both Tyler K's room, which she prefers no air conditioning.
She likes, she's warm-blooded, that's for sure. And of course, it's going to serve this bedroom
as well. Cold air sinks down, so it shouldn't have any problem cooling this space and also
dehumidifying the space. That's a huge deal for us. I think the tub was installed last time I
checked in. Got a big old mirror over there and some, just a bunch of temporary stuff, but the
bathroom is fully set up and fully operational. Today, I'm going underneath the bathroom. When I
first decided to insulate the bathroom floor, my motivation was, I don't want cold toes in the
tub. Well, it's now hot outside and now I don't want to lose that air conditioning. We're going
to insulate the bottom of this bathroom floor. Should be pretty straightforward and pretty easy,
although it's in a spot where it's difficult for me to record down here because there's very little
light and not a lot of room to move around. Anyway, we can check out my drain and my plumbing
I did over here. That side is where the bathtub is and it's a P-trap below the floor. This one
over here is an S-trap inside the vanity coming down to the PVC over here and then we
tie off into a four inch drain down on the floor. Of course, the toilet is that other pipe over
there that's already been done for a while. You know what you don't see? Can anyone see what
they don't see just yet or find what is missing? It's like one of those old
magazines. You got to find the hidden thing. Where is it? Where is the vent? You got to have
a vent on the sewer, right? This is a very non-typical vent set up, but let me explain it.
So right inside the wall right there, we have our one sewer out coming down through this pipe into
our treatment facility. This is not a septic tank. We don't have city hookup to a municipality
sewer system. It's just a tank here. It's an ATS, I think, an aerobic treatment system or something
like that. It's not quite a septic tank. It's slightly different and the reason it's different
is it requires this air pump to 24-7 continuously pump air into the system. So this pipe right here
was supposed to be a camper hookup where you could screw in your camper hose and sewer hose
and dump your black tank outside. That was the goal for that spot right there. Instead,
I pulled that off and I just put a 90-degree elbow right here with an irrigation drain inside of it.
So that stops any like little animals or whatever from trying to jump in but allows air to come out.
Now this should smell horrible. This is the vent for our sewer system but it doesn't stink right
here. Maybe there's multiple reasons why it doesn't stink. It's kind of windy right now so
there's no concentration of air. As soon as it comes out, it's blown away. Maybe it's the fact
that this thing is continuously pumping air in there so it's a continuous flow of air out,
therefore diluting the odor. If there is one, I don't know. But what I'm getting at is putting
the vent outside right next to the tank eliminates the need for having a vent inside of the system.
I'm not saying you can get away with this on all installations. As a matter of fact,
that's not going to be up to code for a lot of places that are subject to code. But for a very
compact water system that we have in this in the shop, just that one little bathroom right there,
this vent is doing the job just fine and it eliminates the need for me to put another
hole in the envelope of the shop. Otherwise, I would have to take a piece of pipe and go up
either through the ceiling or through the roof rather. That's the most typical location.
Or maybe come out the side on something else. Excuse me, I'm getting tongue-tied. Something
else that I was considering if this didn't work would be to come out of the shop on the side and
then go up maybe 8-10 feet so it's above eye level. But yeah, this eliminates the need for
a typical vent on the inside. And I got this idea because I saw a bunch of properties in our
neighborhood that have clearly septic systems and they have this little vent coming out right at the
tank. So yeah, it works and prevents me from cutting another hole inside the shop. Now, like I
said, it is windy today so maybe that's why I can't smell it today. But this has been installed for
about a month now and nobody has noticed any type of sewer smell outside the shop. Especially
actually Tyler. Tyler's play fort. I drug it over here so she could have access near the water to do
outdoor kitchen type stuff. And she doesn't say it stinks over here at all. So there's my sewer vent
outside. So far that vent outside is working and I really like that it's working. One less hole
in the shop envelope. So no bubbling out of the toilet when we flush. No bubbling out of the
bathroom vanity when we drain water there. And no bubbling out of the bathtub when we
drain a full tub of water. So that's fantastic. Spray foam sticky and it's going to stick up to
the bottom of this floor and it's going to stay there and not sag. And I'm looking forward to that.
But I don't want it to stick to this drain pipe where the tub is. And that's because I still need
to access this and be able to hook up the tub and whatnot when I remove it to lay the floor in the
bathroom. So I think my only preparation down here is to bag off this section of pipe right
here. And it's just so it doesn't get a bunch of spray foam all over it and doesn't get locked
into place right there. The water supply that's fine. It can get spray foamed in place and the
water supply over there can be spray foamed. And the drain for the bathroom can probably be,
for the vanity can probably be spray foamed as well. I also have a tarp to go down or a
drop cloth to go down. Yeah this is kind of an awkward place to record and whatnot. So I have
no strategy and I'm going to play it by ear. I don't know how much of this I can record. But
I am going to be quiet, get suited up, and get to work. I decided to try and use this sheet of OSB
to kick it around to catch the overspray rather than a bag. A bag is just going to be a nightmare
to mess with. Under here I say a bag. It's one of those very very thin plastic cloths.
I've got my respirator on so bear with me as I try and show you something.
This is the main water in to the shop and I have it plumbed into a loop. Kind of hard to
squeeze back here. Plugged into a loop. Plumbed into a loop into the bathroom. So the loop in
bathroom has the shutoff valve right there so I can shut off all the water into the shop
via the convenience of the bathroom rather than climbing down here. But you see that light right
there? That is a gap into the bathroom. So that means that when the air conditioner is running
all that cold air is rushing through this gap down into this non-climate controlled space.
So I'm going to squirt some foam in there and that'll definitely seal that up and prevent
any types of crazy airflow out of the bathroom floor right over here.
Well it's several days since we've got, well since I got the spray foam done under here
and as you can tell I made a mess. That was a last minute uh you know what the juice is not
worth the squeeze type of a realization. Kicking this uh I don't even know where it's at. I think
took it out of here. Kicking the uh piece of OSB around. Yeah that that was kind of it's a tight
space to be spraying anyway. And then for the uh that plastic cloth I got there's no way. Absolutely
no way. It would have got a little bit of foam stuck. Could you imagine getting a little bit
of foam stuck on that uh those coveralls and then that getting stuck to the plastic and you're
rolling around. Then you pretty much mummify yourself in that plastic because you're all
rolled up in it. I'm glad I did not do that. This stuff will stain concrete big time. So as you can
see here I'm going to have a blue spot on the concrete for the rest of the life of this concrete
basically. But in this case it doesn't matter. It's just a crawl space. I'm not worried about
it at all. It's always going to be a crawl space when we're moved out of this space. This is just
essentially guest quarters. So this will always always always be a crawl space and I don't care
if it stains up the concrete. But you have to uh you have to cover up down below for sure if you
need to keep whatever flooring you have really really nice. I didn't mention it earlier on the
plumbing uh the the supply lines. I just have them draped everywhere to have to reduce the amount of
90s and sharp turns and whatnot. I was going to put a you know put all the plumbing up against the
uh the wall over there and make it all nice and tidy and have a bunch more 90s than what's
necessary. But I figure these swooping lines right here will be uh less restriction than
than water flow hitting a 90 and having a turn. So so there's that. Big thank you to Beast USA
for supplying this full stop closed cell hybrid DIY spray foam. That's a mouthful. Uh DIY spray
foam for the the insulation needs here in this apartment. I did the the walls then the ceiling
although I wish I would have done the ceiling first and then the walls which the reason why I
mentioned in the ceiling video. So if you haven't seen that go check that video out.
And now I've done the bathroom floor here in this shop in the shop here in this apartment.
And um it's we've experienced both cold and hot. So we've had to heat it as well as cool this space
and it takes very little energy. And the the temperature swing is there's not much of a swing
it's even temperatures all the way through these three rooms. And that's that's pretty darn cool.
This is an interesting little product. Uh check it out on their website. I'll have an affiliate link
in the description below. If you purchase through that affiliate link your cost doesn't change but
I do get a little bit of a kickback on the sale. So that's appreciated but not required. Check it
out go to their website. Also I mentioned earlier in this video that we're going to do a giveaway.
Beast USA wants to give away a box of 12 cans. And I'll have all of the details to that in a
pinned comment down in the description below. So check that out if you want to enter. And yeah
that's it. The space is insulated and we are staying toasty when we need to stay toasty.
And we're staying cool when we need to stay cool. You guys take care and I'll talk to you in the
next one.