My wife wanted a shield...

Shielded Dynasty Network
2 followers
1 Video View·Feb 28, 2026
AI Generated·May contain errors
Good morning. We have a problem. My wife wants a shield. Like a real battle ready shield.
And because I'm a swordsmith, we're going to make her one.
Now the first step in creating this shield is we need to settle upon a design.
I'm going to be going with a round style shield here, similar to that of a buckler.
These are typically meant to be used one handed in partnership with an arming sword,
which is the type of sword my wife has. Now all this means for us right now is I need to
start cutting up some wood so that we can glue up the panel that's going to make up the main body
of our shield. Now that our wood's cut, we can move on to joining them together.
Now before I do that though, I want to add some texture. Believe it or not, whenever these shields
were made historically, they didn't have a table saw to cut their wood. And so oftentimes I believe
it would have been hand hewn. That being said, I want to simulate that. So I'm going to take an
angle grinder and we're going to just attack each of these boards individually and make it look like
it was used in battle. All our boards have been successfully prepared and so what I'm going to do
now is trace out several different circles concentrically. And what this will do is
basically allow me to now cut out the rough shape of our shield and then we'll glue it together.
Okay now we can glue them together.
Just kidding. I'm out of glue so we gotta we gotta go get some.
We got glue. And now we just let it dry. The glue is dry. We now have a circle of wood.
And that circle of wood is going to be the foundation of our shield. Now we're not out
of the woods yet though because there is a very crucial part to this shield that comes next and
that would be the boss. And no I don't mean me. You see the boss on a shield is a small dished
out metal piece that colors the center hole that we created as well as it protects the hand and
the shield from metal blows. I like to think of this part as a cereal bowl of death because it
looks like a cereal bowl on the front of the shield. So yeah we got to make that part next.
Now this might seem pretty straightforward but for me this is quite a daunting task because I have
very few if at all any armory experience. The reality is I'm used to working metal in very
linear ways and so as soon as we introduce a three-dimensional kind of forging requirement
I'm kind of a bit lacking skills. That was English I promise. All that being said though I watched
some videos on YouTube like you're doing right now and it seems that the general process is that we
need to create some sort of form that we then can beat the metal into. So let's go ahead and do that.
I'm gonna be here a long time aren't I? Yes. Yes you are Ian. All right cue the time lapse.
Now despite all of my ramblings about how difficult this was going to be in this time lapse
it looks like I pretty much got it figured out. But uh this footage is not the first attempt.
You see I had not one not two but three attempts at this. The first attempt we don't talk about the
first attempt okay. The second attempt you've just watched me do and the problem with this one though
it's a massive improvement it had a hole in the front as well as it just didn't have all the
crispness that I wanted for our shape. And the third attempt is our final piece and I'm really
happy with how it came out and now we can move on to trying to attach it to our shield.
Now the next step is something that I've been wanting to do for a long time.
You see to get that shield boss to sit on the wooden shield we have to nail it or rivet it on
there and rather than just simply use store-bought nails we're going to forge our own. Now the
process for this is pretty straightforward. We're going to take a piece of round stock
forge it down on a taper and then we're going to put it inside what's called a nail header.
Now the nail header might sound really intimidating to some but all this is is just a piece of steel
like hole drilled through it and a sort of counterbore on one side. I knew I'd have to
make one of these for this project and I thought it was going to be really difficult but it was
so easy that I literally went huh that was really easy. We're now going to take this and insert that
tapered bar and smash a rivet head on there. Oh that's sick. Now that's been nailed on it looks
actually so awesome. There's just one problem though. What's that? Where is the handle?
We now have an almost finished shield. The last functional thing we need to do is to add a leather
band around the outside perimeter. Now to do this I'm just going to drill a series of holes in the
wood that are pretty small. I'm then going to cut out two other strips that have a reciprocating
set of holes in them and then we just sit there and stitch it for a while.
Guess what? Now we have a finished shield. The last thing we need to do is to make it look pretty
but uh for that we're gonna need my wife because she's pretty. After getting a fresh coat of paint
our shield is now officially done and we can reveal the final product but first sunset.
It's pretty cool. So anyways here's a reveal. You're still here. It's pretty cool. The sun
hasn't gone down yet. You should watch these videos. I think you would really like them.
Thanks for being here. God bless.
