My Shield Collection.

Shield of Antiquity
8 followers
3 Video Views·Mar 15, 2026
Hello everyone and welcome! So, as you may have noticed from the decor change and, of course, the video title, we are talking about shields.
So in this video I'm just going to run you through all of my shield collection, and I'm just going to talk a little bit about each shield, how I make them, and the use of each shield in history.
I will only be talking about my own shields, because my father and my brothers also have a lot of shields. I'm not going to go through them, because I have way too many myself.
So, let's get started with the first shield. So this here is the first shield. I am going chronologically from the first shield that was made to the last one.
So this is the first shield I ever had. This is exterior, that and this is interior.
So, it is basically just a very small, round shield. And, well, I can't remember when I got it, I think it must have been like seven or something.
But this shield has a long story behind it. So my father made this shield to me, as I said, I think it was seven or something like that.
And I think originally it had black paint on it, just plain black, and it has got lots and lots of layers of paint, because I've just painted it again and again.
So originally it was black, then I think I painted it red with a yellow wolf on it, something like that.
Then I painted it black with a certain kind of symbol on it, and then I painted it like this.
So it's just a plywood shield, one centimetre plywood. It has an interior made up of this cloth here, and the exterior is just bare wood with paint on it.
It is, of course, a boss grip shield, and it has this strap here, so you can put it on your back while travelling, for example.
It also has this rabbit skin on the inside, which is nice just to protect the hand from any kind of impact you can have from the wood or the boss itself.
So that's actually really nice to have. It also has this edging here, which is made out of canvas.
I didn't have rawhide at that time, so I just used canvas just to have an edging.
Now we can talk about the handle itself. So basically, this is a pretty classic construction that I use on lots of my shields.
And it's basically, you take a wooden stick, basically, and you make it flat on each side with a round handle.
So basically, it is flat here, and then it has a round handle, so you can grip it here.
Now, this shield is 60cm in diameter, so it is a very small shield.
It's a little bit impractical to fight with when you're trying to fight someone with a long weapon, because blocking at your feet is not very easy.
But it's nice overall, and it's a nice small shield.
And now we have this hexagonal shield. You may have seen this in the video where I swam in armour.
And this is the second shield I ever got. Again, it's my brother who made it.
Again, plain wood. It has no cloth on the inside, just wood with paint on it.
The edging on this shield is some kind of cloth. Again, I didn't have rawhide at that time.
The handle is a little bit different to what I usually have.
So it's just basically a wooden plank with some leather wrapping on it.
Works fine, but not what I usually make.
Then we have the paint on the outside.
So this shield here was originally black here, black here, and white in the middle.
I repainted it at one point in blue, and now it looks like it's a dark blue here and a little bit lighter blue here.
It's actually just because it's black underneath here and white underneath here.
Now, this shield I haven't used for a long, long time.
And I actually attached a boss to it for the video where I swam in armour because I needed some kind of shield and I just used this one.
So this shield boss here is different to the ones I usually use.
It's way, way thinner, and I just quickly attached it on here for having a shield to swim in.
The boss that was originally on this shield, I think, is this boss here that I reused to make this shield when I made this one.
Well, speaking about this one, this is the next shield.
So, this shield here is a much larger round shield.
It has a raven on it, which is pretty classic for a viking shield, and it has rawhide edging.
Now, this rawhide edging, you may notice it is pieces of rawhide.
Not historically inaccurate in any kind of way, but my newer shields actually have big strips of rawhide, and that's actually because when we first started using rawhide,
we actually used some of these dog treats or something like that that are made out of rawhide, and they kind of shape up bones with that rawhide.
And we used that, we just put it in water and unwrapped it to put it on the shield, and it worked fine,
but later on I found out that you can actually get rawhide that is supposed to be used for shields, which is just more practical.
But this shield is made out of this dog treat rawhide, basically.
Now, this shield here is only 5mm thick, but the two other ones were 1cm thick, so this one is half as thick,
which is kind of good when you have such a large shield, because if you have a very large shield that is very thick, it's going to be heavy.
Again, this is plywood. All of my shields, except one, the scutum, I'm going to talk about that one later,
the scutum is actually not plywood, but all the other shields are actually plywood.
Now, this shield boss here is another kind of shield boss, yet again, this one is way thicker,
but it's also, if you look at this from this angle here, it's also way smaller in this direction here,
which actually means that when I have my hand on the inside, my knuckles on the edges actually touch the boss.
So, for this boss I would actually need to have some kind of an elevated grip,
because now, if you look here, it's flat here, and then it's a round handle that protrudes into the boss.
Here, I should actually, for this kind of boss, make the handle of the shield be on the outside of the wood.
So, this shield here also has a strap here on the back. I think, yeah, this strap here is a little small.
It still works, but it's a little small, and it also has leather wrapping here on the inside for the handle.
Now, I think that this shield is going to be scrapped at one point,
because it has a problem with the knuckles, basically unusable because of the problem of knuckles,
and it is overall a little bit unnecessary, because it's basically the same shield as this one, only it's worse.
So, I think that this shield here is going to be scrapped at one point, and I'm going to use the boss for another shield,
if I want to make another shield. We'll see.
Another thing to mention about this shield here is that it's not just plain wood with paint on it,
it's actually wood with canvas glued to it on the whole surface of the shield, and then paint.
Canvas is something I started using at this point for shield, because it adds an extra protective layer to the shield,
and the paint sticks really well to the canvas, because the canvas is supposed to be painted on.
So, actually really nice to add that to a shield, because the paint sticks very well to it,
and also it's very easy to glue to the shield, I use wood glue to glue to the shield,
because the wood glue just sticks to it very well as paint.
And it has that on the front and on the back.
Now we move on to this shield here.
So again, a round shield. It is pretty small, but a little bit bigger than the first shield I showed.
It's kind of in between that one and the one I just showed.
So, on the front, quite similar to the first one, just wood with canvas on top and then paint.
Now this one is a 1cm thick plywood sheet for the shield, so it's a little bit thicker shield, a little bit tougher small shield.
Now this one does not have any canvas on the inside, and the handle is constructed in a little bit of a different way.
So, you can see the handle is really really big compared to the other ones.
So remember, when I made this shield here, I tried to make a handle as I have done previously on the two other ones,
but the handle actually broke when I did it, because I didn't use tough enough wood,
so I just decided to go for a very very tough option like this.
So this is basically a plank cut out in this shape and then smoothened out to make a good handle.
Now this makes it very heavy, but it is really really tough and strengthens the shield a lot.
And I think that for the other shield, the one I just showed with the boss that was a little bit too small,
I will have to use some kind of handle like this one, because, as you can see, this one is just on the outside of the wood,
while the other ones actually have the handle protruding into the boss.
This one does not have it, so I have a lot of space for my hand.
Now we move on to this shield here.
Now this is my only strapped shield.
As you can see, it is a strapped shield.
So this is also my thickest shield of them all, so it is 1.5 cm thick plywood, so a really really thick shield,
but you kind of can have such a thick shield when you have a strapped shield, because it's closer to your body,
you're not holding it out that much, so you can have a rather heavy shield.
And also it's more necessary, because I don't want any arrows to pass here,
because if they do pass, well, they will just go right through my arm, which would not be particularly nice.
Now this shield, you will notice, has this rawhide edging.
At that point I had found out that you can buy rawhide for shields specifically,
so I had done that.
As for the previous shield, this has a canvas on the outside,
and it also has it on the inside, only this one on the inside is not painted.
You also notice that it has this rabbit skin padding underneath,
which just makes holding the shield way nicer, because if you just have a hard wood back on it,
your hand is going to get hurt and stuff like that.
So what I did here was basically to... I have a rabbit skin nailed to this shield,
and inside is stuffed another rabbit skin to give some padding.
And that actually worked really nice, so that is really good.
Another thing that I have on this one is actually these metal things on the end,
and that was actually just to strengthen it, particularly down here on the bottom here,
because it is a shield with a point, and when it hits something with that point,
the point actually has really high chances of breaking or getting chipped or something like that.
Not too much if you have this steel thing on there.
Now the reason why I made this shield was actually just because I wanted to have a strapped shield,
just to test how it is to do stuff with a strapped shield.
So I think originally what inspired me to make this shield was that I wanted to test whether or not
you could dual wield in some kind of way while using a shield,
because theoretically, since this hand is only holding a strap,
theoretically you could dual wield in a certain kind of way while using a shield.
And it does work to a certain degree, but it is a little bit hard and impractical,
and you cannot really defend yourself too easily with a shield while dual wielding.
It kind of works, but not too well.
Another reason why I made this shield was that I wanted to test how much better it was to have a strapped shield
than a boss grip shield when riding on horse.
And well, it did make some difference, but it wasn't huge.
Then we have the paint. You're probably wondering why did I paint this on it.
I don't know, honestly, I was just looking for a medieval looking kind of shield paint,
and that is the best I found.
The other ones have kind of fancy paint on them,
but this one I just didn't really know what to put on a medieval looking shield,
because you cannot put a rune or a raven or something like that on a medieval shield,
it would look weird.
So anyways, on to the next shield.
So the next shield is this shield here.
So this one is a really big Viking shield.
It is 1cm plywood and it's 90cm across, so it's really, really a big shield.
It is a historical shield, usually a Viking shield would be thinner, but this one still is historical.
So the symbol, the paint on this shield is actually one of my favourite paints of them all.
It was extremely hard to make though,
because, well, you have a symbol on a sheet of paper that looks like this,
but then you need to scale it up to fit the entire shield, it's really, really hard.
But I'm really pleased with how this shield looks.
So again, canvas on the outside and canvas on the inside.
Originally, I had actually put some kind of cloth on this shield.
Problem is that the paint literally fell off it when I painted on,
because the paint couldn't really stick to that cloth.
So really, using canvas just was way, way better,
and using canvas is definitely a good idea for a shield,
because you know that paint will stick on it, because canvas is made for paint to stick on it.
Again, this shield has this rawhide edging that is made for shields.
And then we come to the inside.
So, on the inside you will notice quite a strange handle design.
Instead of just having a round opening, I have this shape here,
and the handle is really short instead of going all the way to the sides.
Now, the reason why it is like this is because you don't need such a big handle when the shield is that thick,
because, well, it is already strong enough, it doesn't need the strengthening of that handle.
So instead, this is basically...
It's really hard to show anything with this shield.
Hang on, let me just grab this.
So, basically, the plywood extends into the handle,
and then you have one piece that has been fastened to each side,
a piece of wood that has been fastened to each side of that plywood piece.
And then the reason why it's not round on the bottom, but rather this triangle-looking shape,
is because you actually need this triangle shape to strengthen that thin piece of plywood that comes across.
So, yeah, it's kind of a different design, but it's a design that works great,
and, well, I just wanted to try something different, really.
So now we come to this shield here, which is kind of supposed to be a scutum.
And supposed to be a scutum, because it's actually a little bit of a failed scutum.
I tried to make a scutum, and the problem is that the scutum has this convex shape like this.
And that is extremely hard to make.
I tried to make this, you can see a little bit of a convex shape on it,
but it just bent back a lot, and it's not really that convex anymore.
So how you make that convex shape is actually by taking your plywood and just soaking it completely,
and then bending it over something gradually,
and because it's soaking wet, when it dries it will keep that shape.
The problem is that the plywood I used was modern plywood,
which I think has some kind of chemicals in it that makes it actually keep that shape a lot more,
so it's way harder to make it change shape.
And also I think that I should have soaked it and bent it, soaked it and bent it, soaked it and bent it a lot more times.
I only did it once, maybe I should have done it more.
But yeah, it didn't really work out too well.
You can see it has a little bit of a convex shape, but not too much.
Now historically, scutums were made of plywood.
Other shields would historically be made out of planks, layered like this,
but the scutum was actually made of plywood.
Now the funny thing is that all of my shields are made of plywood, except this one.
It has an outer layer of plywood, but on the inside it has actually planks fastened to the inside.
Again, we have rawhide edging, made mostly for shields,
and then you'll notice here that I have a kind of a different boss.
It's a round boss, but then has this square plate on the outside.
That is historical for scutums, but all scutums would have that,
like some would even have a spine boss, which is basically a big wooden boss,
that goes all across also a shield and with a metal plate on top of it.
Some would have that, but these square plate on the outside were actually quite common.
Then it has kind of a classic scutum paint.
And then if you come to the inside, you can notice several things.
First of all, I have these reinforcement things here to hold the planks in to the plywood,
and just reinforce the shield generally.
And then we have the handle.
So, as for the previous shield, the handle does not run across the whole shield to strengthen it,
and the shield is already strengthened enough, it's so thick.
I think in total this shield is 1.5 cm, so it's really, really thick,
and it's also too heavy for a historical scutum.
So, this shield has this handle here, I carved this out of wood.
Now, it is an alright handle, the problem is that when you hold it, you hold it like that, right?
Because it tends to turn a little bit like this, it's actually quite annoying.
Especially if I was to travel with this, it would hit my leg down here all the time because of the handle.
That is kind of a weird shape.
But overall it's fine.
Then this one also has this rabbit skin on the inside.
Again, just to protect from impacts and stuff like that of your hand towards the wood.
So yeah, this is kind of a failed shield, but it's nice anyways.
So now we come to the last shield I ever made, which is this Valknut shield.
So, this one is definitely a great shield, it's definitely the best one I have.
It is made of a 5 mm plywood sheet.
I have found a 5 mm to be relatively good for large shields,
because if you have 1 cm of plywood for bigger shields, it's just way too heavy and completely unusable.
This one is still completely nimble, even though it's that big, because it's made of a rather thin plate.
It has rawhide all around it, canvas on the outside and inside, classic boss and all of that.
Then if we come to the inside, the first thing you'll notice is this strap here.
So, if I grab this shield here, this has one of these straps.
But it's really annoying when you're fighting anything with it, or just not using the strap.
It just goes in all directions when you move the shield, and it's just so annoying.
So I needed a way to hold the strap in place while using the shield.
So what I did was to basically just cut a belt, attach one end down here and one end up here, and then just attach it together.
So now it is tight and practical to fight with and everything.
And then if I just open it up like this, now I suddenly have a strap that is even adjustable.
So if I'm wearing nothing, I'll probably just tighten it a little bit more, like this.
And if I'm wearing big and heavy armor, I can actually just loosen it up for it to fit.
So that is really a great modification to this shield.
And also what I really like about having a strap on your shield is that you can pretty easily fight with a two-handed weapon, right?
And then if someone shoots you with an arrow or something, you just turn around like this and you're completely protected.
I'm not even holding the shield, I'm just holding it basically like a strap shield.
And this is protecting me relatively well against arrows, even though I'm using a two-handed weapon.
And then melee, I'm ready, right?
So that is actually really nice to have a strap shield like this.
So if I was fighting with a Dane Axe or something like that, I would do it like this.
And I think even if I was fighting with a spear, I would do like this and just have my shield ready on my back.
Because honestly, in terms of all the testing I've done, one-handed spear with a shield is completely useless because the spear is just way too heavy.
And that is even if you have like a training spear that has no head on it.
Because it's still only the wooden stick too heavy to be nimble enough for it to be effective.
I honestly would like to just use a spear in two hands, way more efficient in any kind of testing I've done.
And then you can have the shield on your back to protect you against arrows and stuff like that.
So that is something that, yeah, a really big improvement for the shield.
So now we come to the handle. Now we are back at the classic construction where it's cut out flat here with a handle that is protruding into the boss here.
Now the other handles I've made are actually made out of broom shafts, I think.
This handle here is actually made out of ash wood that I cut down from a tree.
So it's way stronger, also a little bit thicker, which is also nice because the other ones were a little bit too thin.
And then it also has carvings in it that I just did because I actually had, I think I'd just gotten a set of wood carving tools.
I wanted to use them and just thought, you know, I'm going to carve something into my handle.
So yeah, I just have it for this.
And then I also carved an arrow in here, slash Tiwa's rune.
And it's actually just to show what's up on the shield because, of course, if I hold the shield like this, it looks a little bit weird.
So I have to hold it the right way. Now it looks good.
And I have that arrow to help me get that right.
And then the handle is also wood hardened.
So I basically just took a kitchen torch and just burned across the whole handle.
And that left the wood dark and inside clearer with the wood carvings because the flame cannot go in that deep to the wood carvings.
So, yeah, this is a really, really nice shield.
Now I also have had some other shields.
I had a drop-shaped shield once, but those are actually just scrapped in the barn because I don't have that many bosses.
So when I want to make a new shield to get, like, something, a really good shield like this one, I actually just scrap another shield to get the boss to make another one.
And the other shields are just laying in the barn, basically.
So I had a drop-shaped shield and I also had an oval shield.
And I just reused the boss for other shields.
So that was it, my whole shield collection.
As you can see, I have a lot of them.
So, yeah, I hope you enjoyed the video and I'll see you in the next one.
