Worlds Quietest Bow 2.0

Shatterproof Archery
117 followers
We are for you - Stay Shatterproof!
Archery Questions? We would love to help: [email protected]
https://www.shatterproofarchery.com/
Shatterproof Archery is a small company located in Colorado Springs CO.
We are dedicated to helping more people enjoy more archery.
#shatterproof
#bowmaking
#traditionalarchery
Last time I tried to make the world's quietest bow,
I did a lot wrong.
First off, I was using a Black Hunter bow,
which is a pretty quiet bow,
but we can get quieter with a Bob Garner bow.
Secondly, last time I was using a 14-strand D97 string,
which is a pretty quiet string,
but after some recent testing,
we found that a two-strand string is actually the quietest.
So now we've got a two-strand string
with padded loops and beaver string silencers.
Last time I tried to wrap the entire bow in beaver,
which actually made it louder,
but with recent testing,
we found that if what we're wrapping the bow in
is secured to the bow, like with double-stick tape,
then it could actually make the bow quieter,
but if it's just wrapped around,
it doesn't make the bow quieter.
Another recent test we did showed
that these can actually make even long bows quieter
by putting them in the string loop groove.
I know it sounds crazy,
but it actually makes the bow quieter
by putting it underneath
where you put the loop of the string.
There are a couple other things that I wanna try
to see if it makes a bow quieter,
like adding a limb quiver,
using heavier arrows and padded loops on the bow string.
Let's see if we can make the world's quietest bow.
All right, we're set up for our testing here.
This mic right here goes to that phone right there,
which is a decibel meter.
So this will measure how loud it is right here, each shot.
And then we're starting out with a D97 14-strand string,
no silencers or anything on the bow,
except an arrow rest, that's the only thing.
And then from there,
we're gonna make the bow quieter and quieter.
This is just to get a baseline of where we're at.
We're gonna get five shots per variation
to make sure we're getting consistent results
on what's the quietest.
What did that read at, Grayson?
73.9.
Doesn't seem very loud at all, honestly.
There is quite a bit of vibration after the shot.
So we might reduce hand shock without reducing noise.
We'll see.
This is D97 two-strand string.
We tested this in a previous video
and found that the quietest strings were 16-strand
and two-strand, which doesn't,
I don't really understand it, but it's quiet.
So we've got two-strand string here.
That means that usually we'd have 14 strands on a D97.
So this is 1 7th of the way of what we normally do.
And hopefully it doesn't break.
So quiet.
Now I know what everyone's gonna say.
We moved, so now the echo is different, but they're wrong.
Why did you move?
We moved because the target was louder than the bow now
because we made it quieter,
but we're measuring the max volume.
So it's not gonna be a difference
because max volume is gonna be the same.
Right here.
Oh, another thing I did on this two-strand string
is I padded the loops to make it up to 16 strands
so that it will be,
I think that might make it quieter on the loops.
But then I also left the tag ends out
because I think that also helps absorb vibration.
So we made a couple of changes because,
well, I think what's happening was
because my release is right here,
that's what was being picked up from the decibel meter.
So a loud release versus a quiet release,
it's quieter than the bow being shot, I think.
But because it was right here,
it was louder because that's where it's picking it up.
So we moved the mic over here.
We blocked some sound waves from the target.
We're gonna retest this one.
We're also gonna retest the original D97 14 strand.
This is the two-strand still.
It's great.
It's the best bow you've ever shot.
I mean, there's zero vibration.
Yeah, there's nothing.
Normal string, retest.
Here we go.
That has to be louder.
At least it's louder longer after, you know?
What do you mean?
The vibration hangs out a lot longer.
Oh, the string does, yeah.
Yeah.
It's still vibrating.
Just stopped.
So whereas with this,
and obviously there's silencers on this one,
it gets quiet, there's nothing in the hand.
Last time we used a heavier draw weight bow, I think.
This one's a 25 pound bow to make it even quieter.
Next, we're gonna add these limb silencers
as well as what I like to call the scarves.
More fluff is better than having.
This is pretty sketchy in multiple ways,
but if it doesn't break, we're good.
And if it doesn't pop out of the string grooves, all right.
So what you gotta do is you gotta smush
the bottom one like this.
The top one, you gotta pull it through.
Why?
I don't know.
We added limb silencers to the belly of the limb here
as well as scarves or string loop groove silencers
inside behind the string groove, in the string groove.
It's so quiet.
This is already better than last time.
We're further from the target now
because as the bow gets quieter and quieter,
now the target's again louder.
Just make sure I don't hit the computer and we'll be fine.
Did you hit the wall?
I hit something.
That was really loud.
I still hit the target.
We're gonna try this with a limb quiver now
to see if limb quivers make a bow quieter.
Oh, that was awful.
That was really loud.
Was it, is it the arrows hitting you?
It's the same, isn't it?
It's still pretty loud.
I think it's the fletchings going.
The beaver is fluffy so it absorbed vibration quietly
whereas this is absorbing vibration,
but making this noise is what it sounds like to me.
So it is making maybe less hand shock, but louder.
Yeah, whoa.
Whoa.
Let's get rid of this.
So these are 300 grain field points.
I've heard that a heavy arrow can make the bow quieter.
So we're gonna try that.
So the question that we're now answering,
does adding heavier weight to the field,
to your arrow make it quieter?
So the question we're also answering
is that does adding knockdown power
also make your arrow quieter?
Cause the heavier tip, the higher FOC,
the more knockdown power you have.
Let's see if I can still hit the target though.
I nearly missed, but that was quiet.
That was 65.8.
So I thought that if we went up like five decibels
from like 70 to 75, you know,
it's like a 10% increase or something,
but apparently that's completely wrong.
Let's go over to our expert.
So tell us what's going on here.
So a drop in one decibel is 20% decrease.
It's a loss of 20%.
Two is 36%.
Three is 50%.
Four, 60.
Five, 70.
That's insane.
So we've already decreased the bow
by how many decibels from,
well, actually we need to check,
but it's a lot.
It's a lot.
Over 100%.
Is that even legal when it comes to decibels?
We can decrease your bow sound by 100%.
That sounds like you're making it nothing.
A loss of six decibels.
The output is 25%.
I have no clue.
Do you know why this is true?
No.
I don't either.
This is taking limb silencers to the next level.
I've tested this with limb silencers,
just like these little guys.
And the more I put on the belly, the quieter it got.
So I'm thinking that with even more fluff
and it all one piece, it might be the key.
Question is, yeah,
how can we make the quietest bow possible?
It got me.
And when you try and get it out,
you just make it worse because there's,
look, look, it's on this.
How did it get on this?
This is what I'm talking about.
Look how cool this looks.
All right.
This is our last one.
This is limb silencers made out of beaver
on the entire belly of the bow.
Maybe to put Ellie Rowe to sleep,
I'll just shoot the bow
because it's just like so soothing to me.
What is it? What is it?
Did we achieve the world's quietest bow?
0.36 and the one before it, the 300 grain was 70.6.
Three decibels quieter?
That's at least like 700,000%.
Quinn, what does that mean?
Clarification.
What does that mean, Quinn?
So a difference, the difference between 15,
or negative 15 decibels and negative 16 decibels is 1%.
What's the difference?
The higher you go, the smaller the percentage is.
What's the difference between 70 and 67?
Like very small.
We were saying 50% a minute ago.
No, because we were reading it wrong.
So the difference between one decibel
and two decibels is massive.
Right, but what's the difference between 67 and?
Very small.
77.
What is it?
Like less than 1%.
So it's, like it doesn't matter.
Yeah, it's so small that it's literally like
to the ninth power percent.
No, that can't be true.
I don't believe it.
That is, no, look, if you look, look on here.
So the loss, so if you go between five and six,
that's what, that's 7% loss.
If you go between eight and nine, 3%.
Why are the decibels negative?
You can go either way.
So if you go between like six and seven,
the higher you go, the less different it is.
So go type in 70 and 67.
Let's see what the difference is.
It's like, it's like these numbers.
So it's like 60 is that.
And 67 is that.
That number has letters.
Okay, here we are with the world's quietest bow.
I can't prove it,
but it's quieter than any other bow I've shot.
I don't understand the decibels.
So this is what we went from as far as decibels.
This is the baseline, no silencers on the entire bow.
77.42 as the baseline.
What's the difference in decibel percentages
from 77.42 to 67.37.
Not percent, no, not percent, decibels.
World's quietest bow.
I think we might've done it.
If you saw any of the errors in our math,
let us know because I don't really understand it at all.
But it got quieter by I think about 90 or 100%.
We went from 77.42 all the way down to 67.36 decibels.
That's 10 decibels, about 10.08 decibel difference,
which I think is like 100% quieter or 90% quieter.
It was really quiet.
Now, what do we actually take away from this video?
What can you actually do to your bow?
I don't suggest shooting a two-strand string.
I think I would maybe suggest shooting a 16-strand D97
that's a little bit quieter than a 14-strand.
I would suggest limb silencers.
I would maybe suggest the scarves if you're careful
and make sure your loops are in the grooves.
I don't know if I'd suggest a whole entire beaver string,
beaver silencer on the belly.
Did we do anything else?
Heavy arrows, if you're hunting, 100%.
Go heavy on the arrows.
It makes your bow even quieter.
The deer won't know what hit them.
Quinn, stop playing games on your phone.
I'm just playing calculator.
Look at the camera and say something.
Well, I gotta think.
All right.
I don't have anything.
Don't forget about that log base 10.
Is that a math joke?
Stay shatterproof and we'll see you on the next video.
