Why Olympians use endless loop strings - Are CNC's safe - Is testing useless?

Shatterproof Archery
117 followers
We are for you - Stay Shatterproof!
Archery Questions? We would love to help: [email protected]
https://www.shatterproofarchery.com/
Shatterproof Archery is a small company located in Colorado Springs CO.
We are dedicated to helping more people enjoy more archery.
#shatterproof
#bowmaking
#traditionalarchery
Welcome to Shatterproof Archery
headquarters.
What's up?
My name is Casden. I'm Gray Baby, also
known as Grayson.
And today we're going to go through some
comments and some unfrequently asked
questions
from YouTube.
You excited? Yeah. Are you excited? I'm
intrigued cuz like I said, I was reading
some of the comments and some of them
kind of like, "Hey, some straight up
haters. some haters.
There are some haters out there, which
I think is awesome.
Not because they're haters, but because
I think it can make us more
chatterproof,
if you know what I'm saying. I think I
know what you're stepping. I think I
smell it. So, starting out with uh
uh making the world's quiet as bow. A
comment from that video at Dave Martin.
Wrap your string in yarn from the eye to
two or three inches past where the
string last makes contact with the limb.
And you may just want to stop there. You
could put a couple couple puff balls.
Either way, your bow won't get any
quieter than what it is. I've done a
hella hella how do you pronounce that?
hella hella lot more experience
experiments than what's on YouTube and
found what's be this is best. You know
how we put the limb silencers on the
limb? Yes. He's basically saying put the
limb silencers on the string. So put a
silencer on the string where it would
where it would hit the limb. He's saying
wrap it in yarn. That would be
interesting to test. So basically where
we have our Flemish. Yeah. in the
Flemish section. Put He's saying wrap it
in yarn. That'd be interesting to test.
I think my guess is that it would slow
the arrow down more than if you put a
limb silencer on the limb because the
string has to move and throw the arrow.
Whereas if you put the limb silencer on
the limb, the limb still has to move,
but it's going to be a lot less drag. I
think what if we like serve that section
like an endless loop? We could, but then
flourishing. Wait, what? Yeah, we may
have to test that out. Dave, the
um putting those limb silencers on the
string instead of on the limb. He left
another comment on our other silencer
video. Synthetic hair extensions
or off an old doll that was trashed work
as good or better than anything
butterfree? Seems a little creepy to me.
Have like Chucky coming haunt you from
your string, dude.
Yeah. All right. Guess what video this
comment's from. This is Tennessee
Douglas. I'm just a poor boy. Nobody
loves me.
You think you're real funny with that
video, don't you? I think so. The video
we're referencing is I did a YouTube
short of Gray Baby here and Weston
jamming out to what's it called?
They were jamming out. Yeah.
I'm just a poor blind dog. GC Simmons
replied to the short where you shot
Kramer with the where he's in the chain
mail. He said, "I want a job here." Lol.
Yes. I was going to say it is pretty fun
working here. You get to do stuff like
that. Not very frequently, but when you
do, it feels good. It feels good. Hey,
don't no don't no don't no don't no
don't no don't no don't no don't no
don't no don't no don't lie. You know
you felt good when you shot me with that
arrow. This is Gray baby also aka known
as the wabbit slayer. The wabbit slayer.
Yeah. There's a lot of people that want
a job here. Um Yeah. And it's it's
pretty cool. Yeah. Do you have a lot of
people reach out? Uh we have what would
you say is your estimate? How many
people have asked to work here?
Like directly asking probably like 20
now via email.
Um it's like a thousand. You're kid. But
it's not like it's like let me do your
social media marketing sort of stuff.
Thousands thousands and thousands
probably
crazy a couple a day. But I think
they're just mass marketing to small
businesses. But people who actually
probably like 30 or 40 and we we are
hiring sometimes.
We're always we're always interviewing.
We're not always hiring.
Do you want a job? Well, that's too bad.
If you're better than this guy, it's
going to be hard to do.
Look, you always tell me I need to be
more confident in who I am. It's true.
So, it's true. If you can sell a glove
faster than Grayson
and you and you're less negative than
him, then you might you might have a job
here. You might have a job. All right.
um on I said stop using ammo on a video
and you said that the carrot responded
and said this is only bow length. So I
saying it's better instead of using ammo
bow length to get your string length. If
you already have a string it's better
just to use that um as a measurement to
get a new string because brace height
affects
what what you want to be correct is your
brace height. String length affects
brace height. You use AMO to get string
length. So if you already got good brace
height, you don't need to worry about
the rest. That's that was basically the
point of the video. Um he said this is
only AMO bow length. I feel like every
time you guys post things about
measurements or standards, you don't
really get it. It's sad really. AMO
standards describe so many things about
archery products. There's AMO draw
weight, which I've seen you measure
incorrectly. AMO arrow length. AMO
aerospine, AMO draw length, and so on.
Grayson, you know what AMO stands for? I
don't know particularly what it stands
for, but like
I'm I'm going to say one thing on that
before we go in. Like I feel like all
like AMO and all this stuff. Like it's
it's all just like kind of a rough
estimate to get to the final. So it's
just like like with like it's still just
like a suggestion and then from there
once you get that length, you can then
adjust it how you want. If you want it
longer then you know okay well this is
what is suggested but I need a little
bit longer than this. So it's all yes it
is kind of a science but it's also I
feel like more of just a suggestion.
Yeah. So what you're saying is AMO isn't
the end goal. AMO is a tool to help you
get to the end goal. Yes. Yeah. I think
you're right on that. AMO stands for
archers manufacturers organization which
is that's a stupid name for finding out.
Well, whatever. No, it's it's it's now
it's the ATA, Archery Trade Association,
but is basically an organization that's
like, hey, let's create standards so
that everyone can measure it the same.
Mhm. That's so that it's easier across
things. But the thing with it's only
helpful as far as it's useful or it's
only useful as far as it's helpful. It's
it's not it's Yeah, it's not the end
goal. So, I think the carrot is correct.
Did you know carrots are good for your
eyesight? I did. Yeah, he knows too.
Yeah. Do you know that video? Is it a
meme? Oh, dude, it's such a good video.
I don't. Grayson will say memes all the
time. I have no clue what he's talking
about. Um, I think he's correct. There
pro there is a he might have actually
created it. I don't know. Uh, but I
think there's AMO for all of these
things.
Um,
but yeah, it's only helpful as far as it
helps you enjoy. Our goal is to help
more people enjoy archery. I And I the
main point of this m video was to not
use AMO unless you have to. Um, and so I
think he's right. There is AMO in all
these, but I think going into depth on
all of that may not help more people
enjoy more archery. for what I was
trying to do with this video. It may be
helpful to go through do a video on ammo
for all of these things. How do you
properly measure everything? Um, and
maybe we'll just start our own standard,
the shatterproof gold standard. I like
that. I'm going to bring some up real
quick. So, what was it that you told me
yesterday about the video about that
Trip Le was talking about? Oh, when your
when your calling becomes your idol. So,
couldn't you say the same thing almost
for like Yes. your becomes your whole
fixation on everything archery? It's
like you're going on a road trip to
Colorado from Kansas and you get to that
big wooden sign that says, "Welcome to
colorful Colorado and you like you can't
you know what I'm saying? That sign
there's just nothing there. There's
absolutely nothing." And you camp there
for like three weeks. You're like,
"Yeah, I love my trip to Colorado." It's
like, "No, that's just a sign. That's a
start." Like it helps you get there, but
it's not the destination. Mhm. I like
that. It's not the destiny or it's not
the final destination. Yeah. Okay. John
Chan said um in our glove video, he
said, "What do you think about using
this glove and playing recurve bow and
for tournament or small competition? Is
that ensure the shooting accuracy and
clean release?
Um,
there's probably a language barrier
here. I think when he's saying playing,
he's saying shooting. Mhm. Playing a
recurve bow. Shooting a recurve bow.
Which I which that actually makes me
think. I wrote a sonnet when I was in
middle school. Mhm. And I referenced a
bow. The name of the sonnet was
misleading. And it was m i ss like like
m Not Mrs. but Mrs. Yeah. Mrs. Leading
basically. You're funny. Um, thank you.
And the sonnet was about like
having like dinner, but then it was
actually about shooting a deer. And so
it's like I play my strings and I was
releasing the arrow. So I've actually
said I've used the same uh word play.
Um, and for tournament or small
competition,
um, is it ensure shooting accuracy and
clean release with the glove? Um, glove
is great for a recurve bow. Um, a lot of
people in competition, I've noticed, use
tabs.
I don't know if it's because it's more
consistent or what. I prefer the glove
because it's easier to use my hands and
I
don't do competition. I hunt and so it's
nice to be able to have a glove on and
use my hands. Um, it does not ensure
shooting accuracy or clean release. The
main thing that's going to ensure
shooting accuracy and clean release is
the archer. You could have you could
have the best tab, glove, whatever, and
have a crazy release. Um, or you could
go bare finger and have a really clean
release. So, it doesn't ensure that, but
being comfortable probably will help you
be more consistent. And so that's where
gloves and tabs can come in handy is
being comfortable. Would you add
anything to that? Well, I would say like
because something that I and I could be
wrong, what I'm saying is like like the
smoothness of the release like coming
off your fingertips. Like
with gloves like it is smooth, but like
if you're looking for the smoothest, I'd
say probably the shell 300 that we offer
is probably going to be the most smooth
just because it's the less like there's
less friction. The Yeah. The type of
material that we use is really smooth
and so it's just going to slide off as
the other ones sometimes it has like
grooves in it. Yeah. But like I don't
know me personally like I like being
able to feel the string. Yeah. And like
with tabs I don't always get that right
because they're thicker usually. Yeah.
And so like I said as you said like it's
not going to necessarily make you shoot
any better or worse. It's more of like
how you perform is how it determines
what you're how you're going to shoot.
So finding something that's most
comfortable for you will probably help
you be more consistent, which will help
you perform better. Yeah, we need to
figure out is it Shell Cordovan or Shell
Cordovan?
Let's look this up. Just let them
comment so we can do another video
and they can just like use the hyphens
in between on how we're supposed to
pronounce it. Yeah, let us know. Let us
know how shell
c o r d o v a n. I I I think it's C O R
D I D. How does how to pronounce that?
Let us know.
All right.
At ask Corey said to um Oh, the video
where we were racing between the sewing
machine and the CNC sewing machine. He
said, "For sure at a single time the
nonautomated one is slightly faster, but
you can but you put someone on that for
eight hours." I wanted to read this
because Grayson's very proud of how
quick he is on this sewing machine,
which he should be. He's very fast. Um,
but I wanted to get his take on this.
you put someone on it for eight hours,
there'll be a lot more mess ups as well
as a higher level of effort will cause a
lot of slowdowns versus the automated
which is easier and safer to get through
8 hours. Okay, so we got multiple parts
here. We got um effort. Uhhuh. We've got
messups and we've got safety.
All right. What are your thoughts? So,
for the effort aspect, when I sit on
that CNC machine for, let's say, 40
minutes doing stuff, I get bored out of
my mind. I'm like, cuz I don't have to
do I literally just throw it in there
and then I hit the button and it and
then I feel bad just sitting there
letting it sew. But like as whereas on
the sewing machine like you have to stay
alert. So, go keep say so like in
comparisons like when you go on a long
road trip right and you have a car that
has the self-driving like cruise control
self adaptive like it's great and it's
amazing but like you get bored for now
me I drive a manual Jeep when I go on
long road trips in that thing I don't
ever get tired because I'm constantly
having to change gears and like when I
go up a hill dude I'm going all the way
down to third and all the way back up to
six. So it's it's like that. It's like
it's a trade-off. Well, yeah. Like when
you have to stay engaged, it a it makes
the time kind of go by quicker. And I
don't know. I feel like whenever I sew
something, I'm more proud of the end
product because it's like, yeah, I made
that. Yeah. Like I put in the work and
effort to get to that point, whereas
with the CNC, it's just like, yeah, it's
super cool watching you do it. So, yes,
more effort, but it keeps you more
engaged when you're actually sewing it
yourself. So now for that's for someone
who's made thousands and thousands of
leather products. For someone brand new,
I mean, yes, it's still going to be less
effort, but there's going to be a little
bit more focus at the beginning on the
CNC, but still, yeah, over a long period
of time. What do you think about safety?
Is one safer than the other? Well, from
experience with the CNC, like as long
again, as long as you're staying engaged
in what you're doing, yeah, it's safe.
But I can't tell how many times I've
slammed my finger when I'm pressing down
the clamp or like one thing that like
whenever we first bought the machine
that they suggested us doing is to like
hold your finger down on cuz this is
there's another comment in this video.
Yeah, we're going to get to that comment
talking about. So, do you want me to
answer this or wait till we get to that
part? I'll I'll Yeah, go for it. I'll
read that comment real quick. All right.
He said, "It's about protecting your
employees, their fingers, and their
health in the future. The automated
machine is appreciated." So,
as I was saying, the the company said
that like leather will like it'll
scratch up whenever you're sewing and
it'll like create air pockets. So, like
if you use your finger to kind of guide
it, it it prevents that and it makes it
look cleaner. Yeah. But like at the same
time, it's like if you're not paying
attention, like you're going to sew
right over your finger and then you're
going to have a hole in your finger from
sewing. Cuz like for examp like like
with the with the per like the one that
I control like if I hit my finger like I
can stop it as soon as I feel the pain
with that thing I have to find the off
switch and it could go like three
fingers deep before I finally get it
turned off. Yeah. The likelihood of
sewing your finger though with either
machine is very low because with the CNC
sewing machine the pressure foot doesn't
move. The material moves. So you would
literally have to move I guess if you
were holding your hand on the material
and then watch like held it while it
moved under it. You also only have not
you don't have very much space. It' be
tight to get a finger under there. It's
possible but well let's put this way.
I've been here for a year and a half and
I've yet to sew a finger. Yeah. Which
fingers crossed and knock on wood that I
don't
fingers crossed and sew together. No
problem. Don't say that.
Yeah. So, I would say the machines are
probably about similar because with the
CNC you have the pneumatic clamp and so
you could put leather in and then clamp
a finger. That wouldn't be end of the
world, but it' hurt a little bit
probably. Um, yeah, it's probably
similar as far as safety goes. So, what
was the the second part of the question
like bullying him? Um, so well, it
wasn't a question, but his statement we
got the effort, safety, u Oh, and then
mistakes. Which one do you think? All
right. Has fewer mistakes. So this this
is getting really So as somebody who has
sewn like until about what? February. Is
that when it came in? January, February.
No, it came in in uh November. Uh
October. Are you sure? Yep. 100%. All
right. I don't think so. But whatever.
Trust me, we were we were waiting for
eight months for something. I had been
I've sewn a lot of products and I've
sewn a lot on the CNC as well. Like I
think for the simple products, the CNC
probably does make fewer mistakes,
but also with the CNC, you have to
really make sure that everything is set
up correctly cuz like the smallest thing
can make like we saw what happened
whenever it was slightly out I mean
barely out of timing and it like was
skipping it would break the thread and
but it also goes kind of the same way
with the normal sewing machine like the
smallest things can make a difference,
but also like the regular sewing machine
is a lot more easy to work on than the
other one. I would say that with an
experienced someone on sewing, it'd be
about the same as far as defects. With
someone brand new, CNC is going to be
way easier. They don't have to learn the
skill of sewing. For you, it' probably
be about the same. But I will say this
though, if you learn how to sew on a
regular sewing machine first, it does
make going into working on a CNC machine
a lot easier just because you
understand. Well, like I know what I'm
looking for. Yeah. So like if there's
something going on, like I can see, hey,
this look this doesn't look like it does
when I do it on this. Something's wrong.
Whereas somebody new probably won't
notice it. Like I know like I'm not
trying to throw like the new guys under
the bus, but like there's been multiple
instances where like there's something
wrong, but they don't see it because
they haven't made
something without they haven't had to
learn the skill just doing the process.
The process is working, but it's not
working. Yeah. And so they don't realize
it. Yeah. Yeah, that totally makes
sense. And like and like I'm sure like
whenever you first were teaching me
strings, I'm sure there there were lots
of things that I didn't see as issues,
but you're like, "No, that's an issue."
Yeah. But it's just like you just have
to learn. Yeah. And experience. So, and
Yeah. So, the manual almost forces you
to learn it. Yeah. Whereas the CNC you
can get by without realizing. Mhm. Yeah.
That's an interesting point. All right.
Let's get into some juicy stuff. Steve
Baker said to our string silencers test,
we tested eight different string
silencers. He said for an apples to
apples test scientific and meaningful
test requires all silencers tested to be
of equal weight and placement. Not
weighing them just waste time and kills
and kills any relevancy common with
backyard testing or an applesto apples
test. Scientific and meaningful test
requires all silences to be tested equal
weight and placement. Not weighing them
waste time and kills relevancies. I
think this
second paragraph is wasting relevancy.
Um
I think maybe he did it and then did
like AI version or something. Common
with backyard testing add in handshot
and cell phone apps notoriously
inaccurate and we all just wasted six
minutes. Well, now we wasted seven.
So, so he's saying that because we
didn't put the silencers in the exact
same spot and because we didn't get the
exact same weight for each string, we
wasted our time with the experiment.
Exact same weight with each silencer, we
wasted our time with the experiment. I
think Steve is correct.
If
every archer
was weighing and putting their silencers
in the exact same spot when they're
using them, I think he's right if that
was the case. That's not the case,
though. people are just going to buy
silencers and put them on and they're
going to be
I mean we put them close to the same
spot probably not exactly but within an
inch of the same spot in each shot and
um so I think that since people are
going to be just be buying silencers
putting them on the string if we were
trying to yeah scientifically test
what's the very best um
then yes Steve is right. But if our goal
is to help more people enjoy more
archery, we should use and put on
silencers the way that people are going
to. Mhm. And test it that way. Um I I'm
sure there's things we could have done
way better on the test. Um but I think
it was still helpful. Well, I mean pe
everybody's entitled to their own
opinion, right? Like no matter except
for the people who lay down. What do you
mean lay down?
their opinion,
then they're not entitled to it. Well,
okay. Like, everybody everybody's
allowed to have their own opinion
whether it's a good or bad opinion. Like
you're you're still like you're you're
going to think what you think. And like
again, kind of going back to like the
very first question that we were talking
about or maybe it was the second like
all this is still it it's just kind of
like a guesstimate on our part. Like
we're not sitting there and like putting
on our nerd glasses and our white coat,
sitting there and going through
scientific like we're just like this is
just like what we think. This is what we
have experience from shooting. How many
arrows would you say you guys have shot
over the five years? How many arrows?
How many shots have you have you done? I
don't know. You're probably in the
hundreds of thousands. Maybe in the
millions, right? Definitely not in the
millions. That would be insane. Do you
know how long it take to shoot? I
understand, but you got to remember it's
a lot of people. How long did it take to
take one shot? Let's say
10 15 seconds. Sure. 15 seconds. That's
That's times 1 million
divide by what? 60 for minutes. Sure.
See, now we're getting into scientific
stuff. Now you're proving his point. 2
thou 250,000 minutes divided by um 60
hours, right?
4,166
hours divide by 24 for days. That'd be a
total of 173 days straight
of shooting shooting a bow. I'm going to
say something that you're going to be
really upset about. Let's do that into
let's say it was eight hour work days.
We're shooting all day for eight hours.
That'd be 520 work days,
which is like what? A year and 3/4.
All right. What are you What am I going
to be? There's video games that I've
played where I've got like almost that
much playing time. How much? Like 170
days. 170 days?
Bro, you better be the best in the world
at that game. So bad. That's the worst
part. I'm addicted. I can't stop. Well,
if anyone has any advice on how to break
an addiction to a video game, my gosh,
put it down in the comments below.
Great. Maybe we'd be happy to read that.
But but like anyways, we've shot a lot
of arrows. You've shot a lot of arrows.
And so like and you've done a lot of
different variants within those shots,
whether it be with different string
silencers, no string silencers, yada
yada yada yada. Right. Okay. So, like I
said, it's all just a this is your
opinion on what you think the best
string solid is and you folks can
entirely have a different one and that
is completely okay. We are just giving
you our preference. You can either take
it or you can experiment in your own
way. That is exactly correct. That's a
good point. Yeah. Chris Bowman said to
our uh video about 15 ways to upgrade a
cheap bow. Um that's one you just
released. Wait, 15 no 15 issues with
cheap bows and how to fix them. Um he
said unfortunately cheaper bows are a
dice roll. Um and he went on to say that
he sets up a lot of cheap bows and he's
seen it all from cracks in the riser to
negative tiller all sorts of things. And
he's exactly right. Cheapos are a dice
roll. I would say
Oh, first if if you're okay with draw
weight being off Mhm. I'd say you got
like a 80 90% maybe more. Maybe 90% plus
chance of getting a good bow with a
cheap bow. Mhm. If you're okay with draw
weight being off, if you're not okay
with draw weight being off, I'd say you
might be like 50/50 if you're shooting
within like 5 pounds of what you're
ordering.
Maybe 6040. What classifies is it? And
you may have explained the video. Yeah.
What it's classified as uh I call a
cheap bow like anything under like 300.
Yeah. Okay. I don't think there's any
bows made in the US right now that are
for less than like 400,
but keep your eye out. Everything's from
China. Yeah. Okay. We got a bow coming
soon that'll hopefully be the least
expensive take down USAmade bow. Have
you already shared how much you're going
to sell that? No. Do you know how much?
No.
Fair enough. But probably between
300 and 500. probably in that range on
that uh
uh sewing video. Um someone said, "Why
is he putting his hands all over the
automated one? Seems dangerous." And
that we already kind of addressed that.
It's to hold the leather in place. Um
and I I don't think it's dangerous. Do
you? Well, as you said, like the mach
like it it's not the needle moving, it's
the machine moving the product around.
So, like as long as you like keep your
hand kind of in the same place, like you
just let your finger kind of like glide.
Yeah. You should. Bunny assassin
responded to him and said, "That's how
you operate them. It's not that
dangerous."
Bunny assassin. He gets it, bro. That's
your cousin, right? Your rabbit slayer.
He's bunny assassin.
That's awesome. Hey, I found a long lost
cousin.
You did? Oh, yeah.
That was shout out to Wayne Studsman.
What's up, bro? Thanks for making some
awesome arrows, dude. He does make some
sick arrows, though. They're beautiful.
All right, our last comment for today.
Tim Vaughn on our video about different
types of materials. He said, "Go to
endless loop string. Less stretch. If
Flemish Flemish was a good string, they
would use them in the Olympics."
What do you think, Grayson? I didn't
even know they used the endless in the
Olympics. Yeah, I didn't know that
either. Well,
I haven't really shot in a whole lot of
endless loops to be honest. Um, I do
think the like from what I have shot, I
do think that ours are more smooth. More
smooth. Um, and I think
I have noticed that a lot of people
whenever they have the endless or the uh
the endless loop Yeah. they still end up
twisting it. Yeah. And then like that
just defeats the whole purpose of it
being an endless loop, doesn't it? Not
necessarily. Does it like affect it? I
don't know. It affects the length. Well,
but like with ours, like it already has
the twist in it and then you can So So
here's the deal. I think you're right
that
um
I don't I don't know if you're right. I
don't know what I'm saying that you're
right about. But I think he's right that
in this loop is better for Olympians.
Olympians goal. Oh yeah, that's what
you're right about. Flemish is smoother.
Olympians goal, they have one goal. They
don't care about smoothness at all
except as it pertains to accuracy.
They're trying to hit the bullseye.
That's it. That's all. Bullseye is all
that counts. Most of us are not
Olympians. And so there's other factors
that might be more important than
accuracy. So yeah, with the endless loop
for an Olympian, they're going to get
the exact length that they need and
they're not going to change it. Like
they're they're going to get the exact
length. They're going to keep it
consistent, all of that. For most of us,
we might want to play around with
different brace height, see what feels
smooth. And so buying a string that
already has twists in it is helpful for
adjusting braceite. You can get endless
loop that already have twists, but
they're usually way more expensive than
the super cheap endless loop that have
no twist when you get them. Mhm. Um, and
so the benefit of that having twist in
is you can adjust your brace height
shorter or longer with that. Um, and
then yeah, I think Flemish twist are a
little bit smoother. Can you put beaver
string silencers on the sleeves? You
can. It's just if it doesn't have twists
in it, you might have to glue them in
cuz it's just a little bit um they e
more easily come out cuz the twists
don't really hold it.
So, you can there are some super nice
endless loop strings out there,
especially with good materials and ones
that are pre-twisted. Um they're super
nice. I think for some reason the
Flemish twist is a little bit smoother.
I don't know if it's here's my theory
with Flemish that it's got more um it's
got the twist in the string, right? And
so it's got more mass at the fade outs
and twist throughout the string. And so
I think that absorbs more vibration than
an endless loop string does. And so it's
transferred less into your hand when you
shoot it. That's my guess. I don't know.
You guys tell us what I was saying.
Everybody that's bought a Black Hunter,
you've gotten an Endless Loop string.
Why don't you guys like test out the
difference and let us know like Yeah, we
include the endless loop string with the
Black Hunters we sell because they come
stock. Um, and then we also include our
Flemish string. So, there's at least 500
of you out there that can test this side
by side. Probably a thousand. A lot. A
lot. Probably a thousand of you guys out
there that can test this side by side
and let us know which one you like
better. That's another thing for
hunting. Like speed is accuracy is
important, but quietness matters a lot,
too. And so, yeah, it depends what your
goal is for archery. Our goal is to help
more people enjoy more archery. And so,
that's what we're going to go do.
Grayson's going to make some bow strings
for you guys every day. Every day. Every
day. And I'm going to
get ready to be gone for a couple weeks
cuz I'm having a baby. Let's go.
My girlfriend's coming back today.
All right. Stay shatterproof. Amen.
