7 Issues with Flemish Twist Bowstrings

Shatterproof Archery
117 followers
Bowstring questions? We would love to help: [email protected]
Need A Bowstring: https://www.shatterproofarchery.com/
Shatterproof Archery is a small company located in Colorado Springs CO.
We are dedicated to helping more people enjoy more archery.
#shatterproof
#bowmaking
#traditionalarchery
AI Generated·May contain errors
Video Summary
AI GeneratedThis video explains seven common issues associated with Flemish twist bowstrings and provides practical solutions for each, ranging from maintenance tips like waxing to structural fixes for loop slippage and length adjustments.
Seven issues with Flemish twist bowstrings and how to fix them.
Let's get to the point.
The first issue with Flemish twist bowstrings is the tag ends.
And this issue is actually no issue at all.
The way a Flemish twist bowstring is made is that there's two bundles that come up
and then they wrap around and then they tuck back into each other.
And then these are the tag ends that are that are popping out.
And so that's just how the string is made.
Now when a string is finished, these tag ends get trimmed and then waxed.
So that it looks really clean.
My recommendation for tag ends is actually just to leave them popping out like this.
The reason being is that I did a video testing different string silencers
and one of them was leaving the tag ends out.
And leaving the tag ends out and letting them get like kind of fluffy
actually makes the string, the shot quieter as you shoot your bow.
So I'd actually recommend leaving them out.
But some people don't like that.
That looks messy.
And so you can trim them with like a razor blade and wax them down.
Now when you need to worry about it is if the tag ends get within an inch of the loop.
You know it's a tag end if it's close to the loop.
Where you see this is called the splice section or the fade out section.
Where these are fading out.
And so you know it's a tag end if it's in that section.
If it's in the middle of the string it's probably a cut strand.
But these tag ends don't have to worry about them.
No issue.
Now the second issue with Flemish twist strings is the loop slipping.
Now the loop will slip if one of two things is true.
One, the Flemish twist is not tight.
The loop will slip.
And number two, if the tag ends get too close to the loop it can start to slip as well.
So that's where you got to keep eye on the tag ends.
Make sure they're not within about an inch of the loop.
If they're getting that close then you know there's not very much friction still holding
the loop in place.
Now if the loop is slipping the fix is most likely getting a new string.
If you know how to make strings you could re-twist it.
But you probably end up having to make your string shorter.
So getting a new string is the best solution for a slipping loop.
The third issue you can run into with Flemish twist bow strings is breaking the loops.
The loops are often the first area to wear out because they're the only part of the string
that comes in contact with the bow.
Now a loop shouldn't just break though just from shooting a handful of times.
If your loop has broken and you're not north of 5,000-10,000 shots then you probably have
a couple things going on.
One could be you have a sharp string groove on your bow.
So that means that there's something sharp where the string goes on the bow that's cutting
the string.
That could be one issue.
Another issue could be it got dirty.
Something like that.
Or the way you're hanging your bow could maybe be rubbing the loops.
If your loop's broken then you can do a couple things.
If you got the string from us you can reach out to us.
We'll send you another string for no cost to you.
Another option is to go with an endless loop or invincible string.
Endless loop strings or an invincible Flemish twist have serving on the loops so that it
is stronger than just this is a 14-strand string so this has just 14 strands that it
needs to cut through to cut the loop.
Whereas an invincible string or endless loop they've got extra serving on top of those
14 strands to reinforce it, make it stronger.
The other thing you can do if you do have a sharp string groove on your bow is file it
or reach out to the manufacturer.
But you can file it with like a chainsaw file, high grit sandpaper, and make sure that there's
no sharp edge to cut the string.
The fourth issue is also looking like the loop is broke but it's different.
It's actually your string coming untwisted.
If your string breaks when you're adjusting brace height, especially if it's a brand new
string, you probably accidentally untwisted the string.
What can happen is if the twist in the middle of the string, you can twist it to make the
string shorter or longer.
Well if the twist in the middle become the opposite direction of the twist on the end
of the string, then in that case when you put tension on it, so it'll look normal when
you have it like that.
But once you put tension on it, the loop's going to come unraveled because it's untwisting
itself.
So how to avoid this from happening is as you're adding or taking away twists to adjust
your brace height, be sure you don't take too many twists out of the string.
So be keeping an eye on it.
And if you get to where the twists are getting to straight or close to straight, you want
to stop.
You want to make sure there's at least one twist every three inches.
If you're getting to less than that, then you're at risk of untwisting the string.
And it's going to look like the loop has broken.
I made a video on that if you want more information on that and how to fix that specifically where
you can actually flimish the string back together.
You're not out of luck.
Or you can reach out to us and we can re-twist it for you.
Now the fifth issue is a subtle issue, but over time it can make your string not last
as long.
And that is a dry string.
We recommend waxing the string every 100 to 300 shots you take.
But you don't have to wax your string.
You can just never wax it if you want.
The issue will be it will dry out and then it will be more easily breaking.
Little strands will start to break and it will break more easily.
When you wax a string, you don't want to wax the loops because you don't want to get debris
stuck in there.
But you want to wax everything down to the serving and then on the other side everything
up to the loop.
That will help your string last longer.
Now the sixth issue flimish twist strings can have, and this is true for all strings,
is the serving breaking.
Besides the loop, the serving is the only point that has friction.
You got the loops touching the string group and then the knock touching the serving which
is in the center of the string.
Serving can wear out usually because the knock fit is too tight or maybe it's just a lot
of use.
Maybe you've put thousands of shots through it.
Well, the string is not done.
You can re-serve the string pretty easily or we can also re-serve it for you.
Whether we built it for you or not, feel free to send it to us.
Ask us to re-serve it and send it back to you and we can do that for no cost to you.
If you want a video on five different ways to serve a bow string, here's a video on how
to do that.
Now the final issue with flimish twist bow strings is that they could be too short or
too long.
Now that's true with endless loop or flimish twist, but you're actually in luck with a
The way we make our strings is we like to make them where you make it longer by half
an inch and make it shorter by about half an inch.
And truthfully, you can make it shorter by many inches because you just keep adding twists.
It just can become annoying when it wants to untwist.
So you've got some room for play with the bow string by adding twists, taking twists
out.
Like I mentioned earlier, be sure there's not less than one twist every three inches.
That way you make sure you're not untwisting the string all the way.
Now if your string is still too short or too long, like let's say you can't take enough
twists out to get your brace height or you have to put so many twists in that when you
take it off the bow it wants to come untwist back to where it was so you have to adjust
it every time.
If that's the case, just let us know and we'd be happy to exchange strings with you for
no cost at all.
Thanks so much for watching.
My name's Kasdan Ammons and this is Shatterproof Archery where we help more people enjoy more
archery.
If you need anything, let us know.
Stay shatterproof.
