What is Stacking? The Limit to Recurves and Longbows

Shatterproof Archery
117 followers
We are for you - Stay Shatterproof!
Archery Questions? We would love to help: [email protected]
https://www.shatterproofarchery.com/
Shatterproof Archery is a small company located in Colorado Springs CO.
We are dedicated to helping more people enjoy more archery.
#shatterproof
#bowmaking
#traditionalarchery
AI Generated·May contain errors
It was the straw that broke the camel's back, the sin that was seen and so it was attacked,
the last straw and so you went whack. When your bow gets heavy, we call it stack. Think of each
of these boxes as one inch of draw as you're pulling your bow back. Each inch you go back
is about two pounds, maybe two to three pounds, but it's pretty consistent as you're drawing back.
But then from 29 to 30 inches is five pounds extra draw weight. You hit a wall,
that is what stacking is. It's the disproportionate increase of draw weight when you've drawn your bow
past the optimal draw length. There are three ways to measure stacking. We'll start with the simplest
and easiest way for anyone to do. The easiest way is just by feel. As you're drawing your bow,
if your bow starts stacking, you'll feel like it hits a wall. Like it's just easy to draw,
easy to draw, and it's like, wow, it's really hard to draw. And so this bow, right about there,
it starts stacking. Like you feel like it's hitting a wall, like it's really hard to draw
back. That's the easiest way to measure stacking. The next way to measure stacking, which is a little
bit more scientific way, is to measure draw weight per inch. And when you see that draw weight per
inch go up, then you know that the bow is starting to stack. Now for some bows, it's really gradual
and for other bows, it's like a spike. It just depends on the style of bow. So we're going to
measure it with this bow. You can do it on a tillering tree or you can put marks on your arrow
each inch and then draw back and have someone let you know when you're at that inch. Check the draw
weight and graph it out. 34 even. 39.52. So it might already start stacking there. 45.52. If
you don't have someone to look at the marks on your arrow, you can put like a index card or
something on the end of your arrow. I'll put it right at my 29 inch mark and draw back. That way,
if this explodes, I don't break creed too. We're definitely stacking. So as you can see here,
our draw weight went up by two pounds, then three and a half, about three, just less than three,
and then five and a half pounds. The variance in that is probably not the actual, like it probably
didn't get heavier. It probably was just exactly where we marked it at, but you can still see a
clear stacking point when we go from 28 to 29 inches, which means probably wouldn't want to
draw this bow past 28 inches. Now the reason this is, is because when you get to the point of
stacking, now you're not adding efficiency to the bow, but you are adding a lot of draw weight.
So if you pull a bow past the point where it starts stacking, you're at risk of breaking that
bow. The third way to measure stacking is measuring the angle of the string to the bow.
If that angle gets to 90 degrees, you are almost certainly stacking. Now the bow might start
stacking before then, but if you're at 90 degrees, beware because you're going to be yanking on the
end of the limb, rather than adding efficiency by bending the limb further. And once the string
lines up with that, we're at 90. Does that make sense? The string lines up with this? Yeah, if you hold this
flat against this. Okay, yeah. Are we at 90? Now stacking is not a bad thing. Every single bow stacks.
What is a bad thing is if you're drawing the bow beyond its optimal efficiency. So practically, how
do you put this into play? Well, when you're looking for a bow, look at the manufacturer's
max draw length. Usually that will be where the bow starts to stack, or really starts to stack
exponentially. So this bow, for example, we say is a max draw length of 34 inches, which is really long
for this short of a bow. But the reason why we have that is because around 30 inches, it goes from
two pounds, two and a half pounds per inch, to three pounds per inch, and then holds that 31, 32, 33,
34, and then it starts to go more exponentially. So it's got a lot of range that it can just keep
going back. Here, Creed, or without hurt your 45. Okay, Creed's got a broken collarbone, but he's got
a really long draw, so you can see how far of a draw it can go before it stacks. So practically, look at
the manufacturer's recommended thing. Now, let's say you're building your own bow, or you don't know
what the manufacturer recommends. How do you know? Well, the easiest way, again, is by feel, or you
can measure it. Now, what's helpful for this is knowing your draw length. If you don't know your
draw length, you can do this same trick with the card. Pull the card up. As long as you know where
you want to anchor, you can draw back. Boom. Now, I can measure from the throat of the nock to the card
to see what my draw length is. So if you're looking to buy a bow and you know your draw length,
you know the manufacturer's max draw length, then you'll be safe as long as you don't go beyond
that. Now, what factors play into stacking? Well, a huge one is bow length, but bow length is not the
only one. A shorter bow will stack sooner, and a longer bow will have a longer draw before it
stacks, but another big part of what makes a bow stack is bow design. This one right here is a 62-inch
bow. This one's a 60-inch, but this one draws almost five inches further than this 62-inch
bow because the more recurve, the more length you're going to have. So you'll see a lot of
shorter bows with a lot of recurve gives you more draw length. Not only does bow length and the
amount of recurve in the limbs affect how much it stacks, but also the angle that the limbs come off
the riser. If it's a takedown bow or if it's a laminated bow, the angle that the limbs come off
the riser can make it stack sooner or later. That's part of the reason why this bow can draw
so far without stacking. This is the Bob Garner because of the angle that it comes off the riser
and then the recurve in the limbs. It can make a short bow draw far. So practically, how does this
play into your draw? Well, some people actually like to stack at the end of their draw. They feel
like it's a hard stop. They know they've gotten to the end of their draw. Especially some hunters
love to have that as the end of their draw because they got a shorter bow, they know they're at the
end of their draw, and they're maxing out the efficiency of that bow. If you're drawing a bow
that, say, can be drawn to 34 inches and you're drawing at 30 inches, you could say you're leaving
some efficiency on the table because you're not maxing out the efficiency of that bow. But what
do you get with that? You get a smoother shooting bow. That's part of what makes the Bob Garner a
smooth shooting bow is that it's got so much extra room. For most people, they're drawn around 28, 29,
30 inches. They've got so much extra room that it shoots so smooth. Your bow might be stacking
if you hear it cracking. You're probably lacking a Bob Garner bow.
