Hi, I'm Mike with House on the Mend. Welcome to episode two in our series Rehabbing This
Rental Property in Bullhead City, Arizona. Now in this episode we are going to work on
patching portions of the roof where the wind has damaged them and peeled pieces away or there's
old satellite dishes and other things that need to be removed and then patch that area. So let's
get started. So what you don't hear today is the wind because for the first time in a couple weeks
it is almost dead calm. The first time I tried to show you a tour of the
roof and film it, it was so windy it sounded like this.
It was just unusable. So let's head up here and I want to give you a first person
point of view of exactly the areas of the roof that we are going to work on in this episode.
So the first thing I want to show you is this satellite dish which needs to be removed. You
can see the cable is already taken off of it. It's just sitting here inviting a leak and then
right over here we have this really tall old like ultra high frequency style antenna. We're
going to take that down as well and if we come over here towards the HVAC unit you'll see the
first spot right by my big head is all these missing shingles that have been blown off by the
and right over the ridge you can see another one here and this one is blown up and creased and
broken because the wind as well and there's a layer above it that's gone. As we pan to the
right here that whole gray area up by the ridge cap is a whole row of shingles that have also
blown away so those need to be fixed. Turning around heading towards the front of the house
you can see right here on this corner
there is a bunch of shingles that have literally torn off in the wind and I think what's happening
here is this is an overlay of an existing roof so these shingles on the bottom they tend to have
like a sticky tar and once you install a shingled roof when the sun hits it and warms them up
it activates like this adhesive underneath it sticks to the tar paper that you've put down and
if the tar paper is adequately stapled to the plywood that's underneath it then everything
remains stable so in this case you have a an overlay so these shingles were applied on top
of an existing roof which is fine it's done a lot in roofing you can have one one overlay on top
by code in most places and you're good to go well anyway the the adhesive doesn't activate
on this aggregate here so if they're just blowing off so instead of coming in and trying to nail
things down which I found in a few points where people have actually put nails in that are exposed
to try to hold down the roof we're going to need to take those off and I have some roofing adhesive
that I'll show you that we're going to use to try to hold everything down where so we don't have any
exposed nails these flats of shingles are deceptively heavy I'm not sure how many come in
here but it says it covers 30 square feet I guess I could do the math but it's a lot more than you
think you probably won't need more than one for basic patch repairs so now we've seen the tour
of what we need to fix next let's talk about the materials to fix them so these are just Owens
Corning shingles these are asphalt shingles they are available at any hardware store such as Lowe's
and Home Depot I happen to just get these at Lowe's this particular pattern that's up on our
roof has this staggered effect where they look like they're one on top of each other and that's
just the the style of this particular shingle some of them are just completely flat so this
bottom area that you see here is the exposed portion that you actually see with your eye when
you look at the roof and this area above this line here so about a little over six inches here a
little over six inches here this is the area that's getting covered by the next course of shingles
and if we flip it over on the back real quick there's a clear plastic strip there that says
do not remove if you come down towards the bottom where the the exposed or bottom end of
the shingle there is this strip of very very sticky adhesive tar mixture similar to the
roof patch that comes in bottles of caulk that we're going to be using tubes of caulk
once the sun activates that area there it gets super sticky all right so those are the shingles
that you'll need match the color as best you can there's multiple different colors at the
hardware store and then we're going to need some sort of roof specific adhesive this is called
henry wet patch and it's rubberized they say so about four days ago i made a rather large
bead of this stuff and it's but it's fully dried now and it is still really really squishy
but the reason it's so pliable like that is the over the course of a day you have a completely
cooled off roof at night there everything underneath it and the shingles everything
has contracted as much as they are susceptible to expansion and contraction then as soon as the sun
comes up that if you've ever been up on your roof it gets hot up there probably a good 20 degrees
hotter than you feel down on on the ground at least in my opinion especially if you're wearing
black clothes the expansion that can occur expansion and contraction all day every day
if something is more brittle that it dries like a glue very very hard and brittle that can easily
crack and wear away from that level of expansion and contraction so i think that's why they make
this stuff so pliable that it it's not going to crack since we're talking about tubes of caulk
you'll need a gun to deliver it with you can use a hand cranked one i really enjoy these electric
caulking guns i have a one made by a rigid and one by ryobi here i did a review video of this guy
when i did some work around a kitchen sink if you want to check that out here it's a great gun
some gloves of some sort to protect your hands these tiles are very easily cut just with a box
cutter with a sharp razor blade on it and go you score right down the non-aggregate side so the
back side of it and it cuts pretty easy especially once they're warmed up sitting on the roof and
then as you'll see as we go along this painter's multi-tool is very good for getting underneath
the existing shingles and checking to see how much adhesion if any there is and peeling up just a
bit so you can slide the repair piece underneath it worked really good all right so down at the
base of this dish there are four lag bolts that have been put in to hold it in place they also
cut away from the the asphalt shingles that i'll show you in a second so we're gonna take this
little ratchet here and we're gonna remove these nice coming right out all right so that spot there
was completely cut out to expose the set of shingles underneath so this row right here
needs to be this piece right here needs to be replaced now when it comes time to look for
opportunities to fill in the gaps with a new asphalt shingle i like to use these little
multi-tools these little scraper tools and i get under the tiles and i look for spots like this
right here where there's really no adhesion going on and that's number one not a good thing but
number two that's an opportunity for us to be able to slide another shingle in and that will
continue with the you know the downward shedding of water first thing i want to do with the five
protrusions into the plywood from those lag bolts is i want to take our wet patch and just actually
squirt it right down into those holes left by the lag bolts there's two good one three four
five very good now i'm going underneath the shingles right across here all right i've got
a spare piece of shingle right over here that can drip onto now i'm sliding underneath the
shingles that were cut out for the mount nice look at that all right let's get under there
a little bit better now more so for water right now i'm actually taking precautions for the wind
here it's brutal and it tears up these shingles and folds them over like you saw if they're not
adhered very well so press that down it is a nice warm day here so this stuff is extra gooey there's
no need for a roller really pressing down on it it's very gooey okay next we want to do
this spot right here so i've got a shingle the shingle goes this way so we need to figure out
where we're going to cut off so we want to cut right there i'm going to bring the shingle right
to the spot just going to come right down like that and look at that that's easy when they're
warm like this easy next let's tackle this antiquated tv antenna here it is held down at
three points with steel cables we're going to cut those off and then i'm going to cut these wires
here leading down through this vent pipe and then right here at the base there's a little pivot
point here's a picture of it and i think if i loosen those nuts which are also 7 16ths we're
having good luck with 7 16ths up here today that i can pivot it towards the front of the house
and that'll allow me to safely bring it down and pull it off of this mount so let's get started on
that oh this is definitely a job for two people if you got them all right change of plans we'll
make the cuts look pretty a little bit later let's get this guy off right here there we go
all right let me cut down the rest of this get this off the roof all right sorry about the
bright highlights over here and the shadow here just that time of day but same thing here this is
that mount where the old tv antenna was so if you look at the ridge cap here we can get underneath
this and that's what we're gonna do so let's take this piece and get right under that ridge cap with
help of our tool just like that and then we'll take our wet patch and we'll fill in right under
there all right i'll put a little bit more patch right in this area here that water can be
introduced but we've taken that whole big spot there and we've created a shed away for it
i would have liked to take this guy out but i i think he goes like this all the way around
and i don't want to tear up all these shingles just for that so we'll we'll cover up and patch
around it this piece is folded over on itself and it's partially coming out it's a mess so
we're gonna cut it back here and then take a fresh piece and cut around this vent let's do that
just come this way and we'll score in a little curve like that let's see how that does for us
oh yeah that's looking pretty good no problem at all there good all right all right so we're at
the very front of the house and there are four holes right here in the roof beyond the actual
house so you can actually see the holes from from underneath the eve when you walk underneath this
portion right by the garage door where a basketball court used to be a little basketball hoop so
one hole two hole three hole four hole this whole area here which is getting very familiar to us
is completely unadhered so we're going to take a couple pieces that i have cut
and we're going to slide those up into place and secure them with adhesive i'm going to leave them
just a little over to fill in these two holes because this this tile or this shingle here is
really secured well i don't want to rip it up just to slip a little piece in there so instead
we'll fill these holes in with the wet patch which is what it's made for and then we will
slide those shingles in to cover both of these holes there we go injecting it right into the
hole finish where we started we're ending up at the beginning so down here in this corner where
the wind has ripped away portions of the shingles we have a remnant right here underneath i'm just
going to rip away there's several nails here that we are going to seat because we're going to be
putting pieces uh over the top of all this so let's settle down those nails i'm going to start
from the bottom sliding up as we go i think we'll be able to get two full-size pieces down here
maybe another full-size piece here i think we have the clearance for it but we'll see oh boy yeah
there is nothing holding these on
okay there's that one tell you what when you're getting ready to tackle this project make sure
you buy plenty of this wet patch or whatever kind of roof sealant or adhesive you're going to use
it goes really quick it's not like when you're caulking and you're using a really thin bead
you know you're putting this stuff on thick hoping it'll stand up to
the wind and you go through these small tubes really quick i wish this stuff came
in the big industrial like construction site size tubes look so much better
so that'll do it for this video i feel really good about where we are with patching the roof
we talked about some very common issues you might come up with as a homeowner or diy or such as
removing old antennas and satellite dishes and then dealing with the holes left behind from
the lag bolts also the basketball hoop that was on the front of the house had a similar issue and we
took care of those all in slightly different ways and then there was the full pieces that were
missing because of the wind damage and then that piece that was flapped over and needed to be cut
away and replaced so a lot of variety but all with that same theme that was my second priority
which was getting up on the roof and fixing any possible points for water intrusion now
the third priority is going to be our next video which is curb appeal so we are going to start
prepping the outside of the house for painting and then i'm also going to combine it with a review of
a paint sprayer that you won't find in your local home store so if you like this video will you
please give it a thumbs up it really helps the youtube algorithm to start suggesting it to more
people also i'd love to hear your comments below on anything that you would have liked to seen
or any ideas for future videos as we go through this rehab process i'll leave links for most of
the things that i talked about here if they're available on amazon full disclosure these are
affiliate links so if you click on them and end up making a purchase it doesn't cost you a thing
but i do get a small reward at the end of the month it helps to justify the time it takes to
make these videos regardless of whether or not you click on my links which i really appreciate
every tool that we talked about and used for this job are all available at any home store as well
if you just happen to drive by there until next time thank you for watching