I'm Mike with House on the Mend. In this video we are going to be reviewing the Reindeer Tools
20 volt mini chainsaw. It comes in both the six inch and the eight inch version. Two batteries,
a nice case that has the charger, a pair of gloves, and a spare chain. So let's get going.
Well it's been a while since I reviewed a mini electric chainsaw. So when Reindeer Tools,
who I recently reviewed their awesome little small drill, reached out to me and wanted to
send me this tool, I said absolutely. I think this has great uses around the garden and also
packed away in your off-road vehicle in case you come upon downed trees or you need to cut
up some dead trees and make a fire if you get stuck, something like that. Let's unbox it,
see what comes inside, get it all set up and charged, and test it. Here we go. Our case
came in a cardboard wrap inside of a cardboard box, so excellent packaging.
Nice case, decent thickness of plastic, a little soft, but no problem. All right, we have a very
poorly written manual, a pair of gloves. These are kind of like gardening gloves. They do fit
my large to extra large hands, but I'm not going to be wearing these because I like my Tylee
puncture resistant gloves. They're about worn out, but man they work good. Okay, here's the good
stuff. So here is our saw. Really nice coloring. I like Reindeer's coloring here. This light gray,
black, and red just looks sharp. So I'm going to put the battery on it just because it's far more
balanced with it on for me to hold and move around. Now if you notice right around the point
of the trigger, right about there, is the center of gravity. There we go. This motor here is quite
heavy. It is a brushless motor, which is nice. I like the feel of it. The fit and finish really
good. No sharp edges of plastic or anything other than around maybe the baffles. This little spot
right here is fine to be sharp because you rest that against the log sometimes when you're making
a cut. This large red dial here, that is your chain tensioner. We have a six inch chain. You don't get
that much reveal. It's probably more like four and a half inches or so, but the rest of it's coming
around. So that's just fine. Nice sleek looking bar here and the tool itself appears to have
a brake, an automatic brake inside because it's quite hard to move the chain, but it runs just
fine that way. If you hear when it goes, when it powers on, it's got a gentle uptick to full speed.
I like that. That is going to add to the longevity of this motor. All right, on this side of the tool
you have the oil sump. So you need to add oil, either bar chain oil, or if you're cutting
living trees, you should be using a vegetable oil. The bar chain oil can actually
hinder the wound healing of the tree on that branch you've cut off. According to the manual,
this is only two fluid ounces going into here. So that is like a quarter of a cup.
Right below that we have this little bubble. You see that? That is the primer for the bar
chain oil since we don't have gasoline, but this looks very similar to a gasoline engine's primer.
And in fact, one of the things that's going to confuse a lot of people
is the manual. They call it the refueling pump. And then in another spot,
they say fuel the chain at 10 minute intervals. I think they're meaning lubricate the chain. So
maybe this thing only lasts for 10 minutes and then you have to refill it. That is not a lot
of time. While we're on the subject of the manual, it also said when it's talking about
checking the oil for the chain, it said to adjust the oil discharge, use the oil supply
volume control knob next to the oil port. Adjust the oil flow rate using the oil feed rate control
knob. Well, there's no knob on here for oil flow. And in fact, the chainsaw that's pictured
is not even this chainsaw. So not only are they using words that are incorrect
for what they're talking about, the things that they're referring to on the next page
don't even apply. So I wish they'd have somebody review that.
Now, if you look right here, this is an anti-kickback protection
bar here. So as you go through and make your cut, this is spring loaded and moves right out
of the way, which is pretty cool. And then it falls right back into place so that if you got
kicked back and it came back on you like this, since you might be cutting a branch at standing
height, you're going to be protected by this little guard here. There is no scabbard. So to
protect the chain, you're going to have to travel with the case. Or if you're in your backyard,
then no problems. You just walk out there and go. This little red button right here is the safety
button. Now, normally I like to see a safety in ambidextrous location. It's clearly meant for
right-handed users, but it protrudes so much that I can grab it with my left hand. And as I come
around to pull the trigger, I can easily push that button in with a bare hand or a gloved hand.
So I like that. We still get the safety factor, but with either hand, I can disengage that safety
and pull the trigger. Now, one thing I did notice is this battery. Both of them are very difficult
to click into place. You have to really push it to have it click into place. And likewise,
when you pull it off, it's very, very, there's a lot of resistance. So I'm hoping that these
batteries will, or this little slot here with use going on and off will become easier. Because I
know some of my older gardeners that have messaged me before about tools and their hand strength
will struggle to get this battery off. I hope that wears a little better and becomes easier.
Speaking of the battery, they are three amp hour, 20 volt batteries. That is a nice size,
especially since you get two batteries. And if you look right here, you can see there is a very
clear kind of target looking push button to get a battery life indicator. And when it's attached
to the tool, it's just a matter of pushing the button right here. Very easy to get at. I love
that. The batteries also have the same coloring, which they just look sleek. There's a nice kind
of matte finish to these. It reminds me of when I used to make Kydex holsters as a police officer,
just a really smooth, nice finish. The tool comes with its own cradle. And I was reviewing a
generator last week and I decided to charge these batteries while reviewing that generator.
And I can report to you that they work great. We had had an issue with the drill that Reindeer
Tool sent me having a bad charger. This one works just fine. When you first put the battery in,
the light will turn from a standby green to a red, showing that it is charging, and back to green
when it is fully charged. Now, as you notice, when this clicks into place, the tolerances aren't so
tight and it is very easy to load and unload. So I don't think it's the battery so much as the back
of the battery receptacle here on the tool that's making it quite difficult to load and unload.
Now, most of our vegetable oil bottles are not going to easily pour into such a small
port here. This is about the circumference of my pinky. So you may want to grab a small kitchen
funnel, which if you're only putting vegetable oil in, won't hurt that funnel and you won't have to
beg for forgiveness. Otherwise, I think you might end up making a mess. Or if you have like one of
those little bottles that squeeze out ketchup, you know, you can bring that along with you
and squeeze that into there. Those are typically what 12, 14 ounces or so. So you get you get
several refills with something like that. Last thing I want to talk about is you get this really
nice replacement chain and it is sealed in a bag with great markings on it. Awesome. A lot of times
you just get them there in the same bag as like some of the tools or something like that. Not
really all that marked. This this looks very professional. Now the case itself, it's it's a
little bit of origami to get the tools in. Take take a look from my overhead camera here. So
to get everything in, we need to separate the tool from the battery. Obviously, that is a very
safe thing, but sometimes you think it should go, you know, like this or like this. It just goes in
flat this way, right into place and then manual and the gloves close up and we are good to go.
Now, I did check this, as you'll see in the video, and it's a little bit bigger than my little
storage box on the back of our Razor 800, but you could easily take this whole case and clip it on
somewhere if you're going trail riding and need to jump out and clear some brush. That is very common
in the spring when the snowfall has come down and pulled things away for ATV riders, trail hikers,
and horseback riders. So it would have been cool if we had a case maybe just a little bit
smaller or some sort of scabbard or something where you could pack this in and out a little
bit easier. That would be a cool accessory to offer on their website, but for around the house
and the yard, this is what more could you ask for. All right, well this was our Christmas tree this
year and after we took it down, my wife brought it out to our goats to nibble on for a week or two.
They apparently love that, so they've helped us with some of these lower areas here, but this is
a perfect scenario to test out our mini chainsaw from Reindeer Tools. We can simulate that we are
going along and trimming back branches on a living tree, and we can also simulate cutting
through branches that have maybe fallen while you're on a trail ride. All right, as you can
see in this video here, I filled up this reservoir. Let's see how this goes. Oh, well it's already
spilling out. Wow, that was barely any. So we'll see how long that lasts, but I can see that the oil
is filled up in the little primer area. So let's just go for it and we'll start cutting off some
branches. I have gloves on. I have eye protection in the form of my sunglasses and hearing protection
in, and let's see how well it does. Tearing through this. Really good so far. Very little
chatter on the blade, but it is fresh, right? Let's keep going. Getting the smaller branches caught
in here, but they come out really easily, and there's also a nice port here to shoot out all
of the sawdust. Man, what was that? Like two minutes and we've got this tree trunk all the
way cut down. Fantastic. All right, a little tip when pruning live branches. So if this was a branch
coming off the actual trunk of the tree and we were wanting to cut it right here, if the branch
went out and was heavy enough, if you just cut right here, by the time you get down towards the
end or the bottom, it can tear away the actual skin of the branch and it makes for a very tough
area to heal. So actually the best thing to do is if this is your spot where you're wanting to make
your final cut, the first thing you should do is come underneath it with a relief cut,
then come out from the final cut and cut off the weight that could injure the tree.
That way if it starts to tear, it would only go to the spot you're wanting to cut anyway.
Then come back for a third and final cut. Perfect. Okay, let's continue on.
We're going to get progressively thicker as we go along and see how well we do.
Good. That actually cut really smooth. I was just being hindered by these little nubs here.
I love how that chain guard just flops right back into place.
Okay, so we have a family tradition where we cut a ring off of the bottom of the tree
and turn it into an ornament. We would burn it for the year. So let's cut a fresh piece off of
this so that it's nice and smooth. Look at that cut. I'll get a close-up of that. That is good
looking. Oh, that'll be really nice. Put that one in my pocket. All right, one more cut and this
tree is done. Excellent, excellent, excellent. All right, I still have oil in the primer. So
even though it's got a very small reservoir, it went through that whole tree and there's still
oil left. As I look on to the chain though, I don't see any oil visibly on the chain.
I don't see any sawdust soaking up oil down here and collecting. So I think it doesn't
automatically do it. You're going to have to give it a pump every so often. Let's see if we can make
it lubricate itself here. I'll give a squeeze and then we'll run it. There, there. Now it's starting
to come out. So it just splattered right there on our nice little cart here. I'll show you. So it is
working. It's just manual. You have to pump it yourself. Well, that's no big deal. Just a little
squirt every so often. All right. Well, since the manual is the only thing about this tool that's
terrible, I think we should rewind a little bit and go back to the proper pre-use lubrication
steps. So I would recommend after you fill the port, before you prime it, because it takes the
rotation to actually get it onto the chain. I think you should take some sort of lubricant, either
putting drops on it or a nice spray lubricant. Lubricate that chain up first
and then go out to the exact spot. Give it a couple pumps on what looks like it's a primer
and start your work. And with the overhead camera set up, let's take this opportunity to talk about
chain tensioning as well as changing out the chain. So first we'll go with changing out the
chain. I have the battery removed and we want to twist off the tensioner here. And that's going to
take this whole cover plate with it. There we go. Good. When you do that, great opportunity to get
in here, clean this area out. So grab the actual bar and off it comes. Wow. That was easy. Okay.
Okay. So you would then take the chain all the way off, get your new chain or clean it out if
necessary. Put it back on. We want all the teeth going and get it back in place. Hold on just a second.
If you look closely right here, you have what looks like a little shark's tail
and then you have the actual tooth. So shark's tail pointing forward and the actual sharp
biting tooth is behind it and you know you're in the right position. So let's get the chain
completely on just like that. Good. And then we'll set the whole bar chain cover
right back into place. Start screwing it down just like that. Now you'll know it's proper when
this back section here doesn't wobble but is actually in a little slot over here towards
where the safety button and the handle is. So that is tight. Let's back it off from there
and now we can adjust the tension. So normally you'd want to be down like this
but for the ease of the camera let's just do it right here. So we want to twist to tighten.
Good. So tighten it or loosen it if it needs it until when you pull down like this
with just moderate pressure. You can't get one of the whole teeth out of there like that's still
a little loose. So let's go one click tighter. Yeah much better. You should be able to pull down
see a little bit but not the entire tooth and once that's good then we can tighten it down
the whole way. We're going to check it once more. Still good. That's a little tight but pretty good.
So I let it sit in its case with the oil in it for several days and if you look here not a bit
has leaked out so that is great. Hey did I forget anything that you'd like to hear about? Drop a
comment down below. I answer all my comments unless they're really snotty which is very rare.
So if you found this video helpful will you please give it a thumbs up. It's really helpful to the
channel. Also please consider subscribing. I work really hard to put out good quality concise but
thorough review videos on this channel. There's many more of those to come. I also have another
project coming up really soon on our basement build so you might want to check that out and
it's free. You just click on subscribe or if you're on rumble follow. Super helpful to the
channel. Thank you for everyone who's done that. I'm going to leave a link to this very tool in the
description below so you click on the more scroll down and all of the information about it as well
as links will be in the description below. Full disclosure that will be an Amazon affiliate link
so if you click on that and end up making any purchase it won't cost you a thing but I do get
a small reward at the end of the month. I will also put Reindeer Tools website in the link below
so check that out. There's a lot of tools there that aren't available on Amazon that I think you
might be interested in. A few that I would really love to review so maybe those will be coming to
the United States soon. I'd like to thank Reindeer Tools for sending me this tool for free for my
independent review. They were very patient with me. The weather's been tough and it took me a
while to get out to where I could actually start cutting it and testing it and it did really good.
The only thing I would suggest to Reindeer Tools of course would be rewrite your manual. It does
you no service. It's only going to confuse your customers and make them angry. Until next time,
thank you for watching and then we'll also for fun we'll wait for this truck to leave.
All right.