How To Install a TV Wall Mount

House On the Mend
25 followers
8 Video Views·Feb 2, 2026
In this video you will learn how to install a TV wall mount and DVD shelf. The below listed affiliate links are for similar items available on Amazon Prime:
TV Wall Mounts:
VideoSecu low profile - https://amzn.to/2Wq98E6
VideoSecu swivel arm - https://amzn.to/2Wjj9OJ
DVD Shelf:
Mount-It - https://amzn.to/2WRlDbk
ECHOGEAR - https://amzn.to/2MxHeBz
Ridgid tools are with me on every job: https://amzn.to/2MueZDJ
Follow us on Instagram: https://www.instagram.com/homvegas/
Send correspondence to:
House On the Mend
7582 S Las Vegas Blvd Suite 189
Las Vegas, NV 89123
I would love to read your video requests in the comments below.
Hi, I'm Mike with House on the Mend. We're here in a beautiful house in Las Vegas in a young boy's
room and today we're going to be installing this TV on a wall mount and then also this wall mounted
glass shelf which is holding the DVD player. So let's zoom in and get started. All right,
so we marked out the center line between both doors on this wall and we found a stud right here
which is great and then about eight inches or so over we're going to put in some anchor bolts
and I've marked those out with these little blue dots and those blue dots correspond to this
mounting bracket that needs to be anchored to the wall like you see here and as you can see
it's got plenty of room here to be adjusted or fine-tuned. So the TV has corresponding mounts
that will be screwed onto the back and those will come up like this and lock into place
and that's how it will be secured to the wall. So what we're going to do
is first drill for these small lag bolts that are included with the kit. We're going to put two
right here. Then we're going to go up in size to a larger drill bit for these plastic anchors
and these came with the kit as well and so we'll drill a hole here and a hole here
with which we can install these anchors. Now we need to create room behind the TV
for this plug. We're going to have at least three plugs going in when you consider the television,
the Roku box, and the DVD player. So this outlet here obviously only had two so the customer has
this small little three plug adapter but it comes out about an inch and a half or so. So
we're going to create a gap here with these little plastic spacers that were included
and we're going to put these spacers against the wall for the mounting bracket and then
also against the television for that corresponding bracket. Now before I do any drilling
I always like to take steps to clean up my mess
easier at the end and so this is just a regular grocery bag here. I've got some painter's tape
so I won't mar the the paint behind here and I tape that up and when I drill
all of the sheet rock will fall right into the bag and it makes for a much simpler quicker cleanup
when I'm done. So I'll put on my safety glasses and we're going to get started. We're going to
drill two holes over here small enough just to get into the stud and then put those lag bolts
in and then we'll switch bits and go to bigger holes over here for those anchors. There's the
stud. If your bit ever slows down when you're drilling into walls and studs just back it out
and let all that debris out of the cutting edges of the drill bit and it'll go right back in.
There we go. Now we'll switch bits and now it's time to drill these two holes. Now my drill bit
seemed just a little undersized when I was eyeing it up to this anchor so I'm just going to check
that fit and oh yeah that's really good. I think I could probably just widen that hole just a little
bit but that's pretty good. There we go. Get all that debris out. All right. Anchor here just slips
right in. Another right here. It slips right in. That's nice. Double check our work here.
Yeah that is perfect. Those holes are lined up good and we're still level.
So let's attach this mounting bracket a little bit rather than stripping that. I'll finish that
one off with a socket. All right that's the first step. All right now we're looking at the back of
the TV and you can see these four points right here are for mounting brackets. In this case we're
going to be mounting these corresponding brackets. So I'm going to get this string out of the way.
It's a really handy little string that comes with this mounting bracket. It allows you to get behind
it from underneath and pull this actuator here to release the TV and that's going to come in handy
when we're making several adjustments here later. But I put a screw and a washer right on there and
we're going to go ahead and start. Start that right into this hole. Now of course I have a cordless drill
but these little plastic fittings are kind of tender. I would hate to strip them out and
there's not much you can do after that. So we're just going to go by hand. Good old-fashioned hand tools.
So now we're just going to remove this base because this used to sit on a higher perched
dresser and we'll get it up for a test fit and once we have it up we'll be able to
measure for the glass shelf that's going to hold the DVD player. All right so we've got the television
hung and we've got it centered along this wall and I marked right here for a center line and that's
where we're going to put the shelf that holds the DVD player. So this is a rather small DVD player.
We don't need much room as far as depth down from the television. So if we put this shelving bracket
here you can see where the glass will go and if we have the DVD player right here
that will work perfectly because we'll be able to conceal all the cords right in this
spot with the cover plate. So let's zoom in and we'll mark out exactly where we want to put
this bracket. All right so now you can see where our center line is
that I've marked out and that's the center of the TV which is centered on the overall wall
and when we look here we can see if we go right up to that center line above the actual CL
that looks like a good spot where we can mount this bracket and you won't be able to see the
cords coming up out of it later. So we want to make sure that this bracket is level of course
and therefore we are going to use this little pocket level that I have it's actually magnetic
so I can pop it right on there and I can adjust and get that bubble just perfect like that and
from there I know I want to put screw there there and then one right here in this bottom area. All
right now we're a little tight up here in the TV for where we want to mount this bracket and drill
these holes so I am going to utilize these draw strings to remove the television get it out of our
way so that we are clear to start drilling and mounting that bracket. All right I got all the
cords and I've got these two draw strings that we talked about earlier in my hand here I'll just pull
on those which releases the brackets and allows me to just move the television right out of the
way. So if we remember about right here was the stud so we are not going to hit any studs but
that's all right because the kit comes with these three wall brackets these are made to go into
drywall so we are going to drill holes in these three spots just like the directions say
to put in these drywall mounts and these three screws to hold our mount in place.
All right so we are ready to drill I took a center punch and I actually
marked the area with the center punch here to get my drill bit started so it doesn't wander on me
when I'm drilling and as always I put up my bag with tape so that all this sheet rock falls right
into the bag and not all over the bedroom. So let's drill these three holes out then we'll put the
anchors in and screw in our brace. All right these are the wall anchors that are included with the kit
as you can see here you squeeze them down like this to insert them in the hole and as soon as
they go through the hole in the sheet rock they flex back open and also the screw
is going to catch this piece and further draw it back so that it clamps against the wall.
Very good type of anchor. So we'll collapse it down just like that and we'll start it right here
in the hole then we'll just hammer those right into place. All right we shouldn't have any more
debris falling out of those holes so I'll move my tape over now we'll take the drill
got the drill bit out instead we'll put in phillips and we will go about mounting this bracket.
I can feel it grabbing that back piece that we talked about and actually starting to brace it
against the wall. That is pretty great. All right before I do the final anchoring in with those
screws I want to put my level back up to make sure that it's just right just ever so slightly
right there is perfect. Nice and level. All right when putting this wall mounted unit up the next
thing to do would be to install the glass and start screwing it into place but before I do that
I want to put the tv back up so I'm not trying to hoist the tv up and out of the way of this glass
shelf. So let's do that and then we'll come back and finish installing this bracket. All right we
got the tv back in place centered on the wall now we've got our piece of glass here we're going to
set that right in this bracket here and I've got gloves on just so I don't get fingerprints all
over it makes cleaning up much quicker. It comes with a hex wrench and a screw so we're just going
to put two of those in here. All right and I can just see that we're at a bit of an angle so I'm
going to put my level going this way hold up this piece of glass so that we're nice and level while
I tighten. All right so now on the bottom here to cover up those two screws there's this little
cover plate and that just goes in with also some hex screws so we're going to put that cover plate
in then we're going to mount the dvd player just like that and we'll run the cords the power cord
and the hdmi cable right up through here and then we'll put in this plastic cover plate and that
goes like this actually and that will disguise our cords. Once that's all in there's a top cap
that'll go right up here and just click into place. All right well we're all done we've got
the dvd player installed all the cables are dressed behind this cover plate and then the
remaining cables for the television and the roku box are all policed around the back here with
twist ties and as always we want to do a function check we got the dvd player going right now and
we want to change over to the other hdmi setting and make sure that the roku box which is playing
something off of amazon prime is also working. So this was a great project we installed the mount
for the tv and then the mount for the dvd player cleaned everything up made sure that it looked
nice before we were done now you know the steps it takes to install this particular
model of tv mount and dvd tray but if you feel this project's a little too daunting for your
skills i understand if you're in the las vegas area please consider giving me a call i'd be
to install your tv for you until next time thank you for watching
