I Ordered A Vintage Movement For This New Haven Clock, But The Whole Strike Side Is Missing?

Amateur Repair Time
257 followers
944 Video Views·Nov 9, 2025
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to
amateur repair time. Uh, if you didn't
see our previous video, we are working
on this New Haven Kunard line
8day
gingerbread clock. Kunard cu n a r d.
Apparently that was named after a ship
line. I' never heard of it, but we
looked it all up in the first video,
figured out what was going on with it.
Um, and then uh it had the wrong
movement with it. That movement was not
installed. It just came with it. I
bought it at an estate sale for $10,
$15, something like that. Uh, so we we
spent a lot of time in a previous video
trying to figure out the mystery of
exactly what's going on there. And we uh
kind of figured out by looking at a
bunch of pictures online exactly what
model movement
uh I think was originally in the thing.
And it's got the it's got a replacement
dial on it. But the pro the problem is
it looks like at some point they mounted
a different movement
um and put different mounting holes
whenever they did that. Uh and that new
movement we could just put it back in
there but it's the wrong one.
It's fun to me to try to make it back
how it originally was. So, all that to
say that different movement, the dial
won't work on it. So, I looked through a
bunch of older dials that I had
and I found this one, which is an old
New Haven dial plate, face plate,
whatever. Um, that's seen better days.
But I don't know what this came off of,
but it should fit on this. And we looked
it up and it appeared to be exactly like
the one that would have originally been
on the clock. And I have a a uh
replacement paper dial there. So,
we needed the movement, the pendulum,
the dial plate, and that we should be
able to put that together to get this
thing back in spec.
So, I have ordered not one but two
movements actually because I saw two of
them that appeared to be the correct
ones on eBay. So, that was the easiest
way to do it. If you want to send us
fewer mail, this is our address at the
shop, by the way. 139 Caldwell Street,
Rock Hill, South Carolina 29730. You can
send it in care of
Joe. It's Broke Lions.
All right, let's see what's in here. So,
this is a this is one of the movements
that I ordered, but it's not a complete
movement. This is just the first thing
that came in. Let's pull all this crap
out.
I don't remember ordering all of this.
There might be extras.
I wonder if they sent me the wrong
thing. What What if it's not even right?
So, yeah. So, I ordered one incomplete
movement just because Well, I'll show
you here in a minute. But I'm waiting on
a full movement.
It hasn't came in yet. Come on. It's
your Okay, it's out. Let me make sure
there's nothing else in here.
There's nothing else in there. All
right.
So, do you follow me? We need a
replacement movement, the original style
movement. We need a replacement
pendulum. And we need to fix up the pan,
put it all back, and then it will be
back how it once was. So, let's see
what's in any of this.
I have two shipments coming. Both should
arrive during this video.
Well, they wrapped it up well.
No complaints there.
All right.
So,
this setup here had two movements with
it. I didn't need this one, but I had to
buy the whole lot, you know, and it came
with this. So, let's see what this even
is.
Is that a Hermly movement? I would guess
the hands have not been bent yet. That's
for some kind of big clock. Now, if you
didn't remember the video I did on that
one, it had a similar
uh movement in it. Something like that.
You can just tell by the hands that it
had a big old dial on it.
Mason and Sullivan,
Germany.
No jewels.
141070.
I thought that was like a Hermley
number.
Um, and then here is our
hammer for the strike.
Well, that's cool.
I'll be able to use that on something.
All right. So, it's extra. So, I had to
pay it. This was not cheap. It wasn't
crazy. I'll just tell you. I'll tell
you. I'll go ahead and tell you the
numbers.
Um,
I did not get a great deal. So, this was
about $15 for all of this. So, it's case
in very nice shape. Still has the gong
in it, which is good. But, I think they
may have moved it. See the holes under
it?
So, that's good. And it came with a
movement, which is a u uh what did we
decide that was Ingram? It's an Ingram
movement. Uh, that's in nice shape. and
an Ingram
uh kind of replacement dial pen. So,
I'll be able to use that in another
clock. Um it also has a um
well, I think that's it. I think it
didn't have the pendulum. So, anyway, so
all that came with all this for $15.
Well, I would value that movement at
about $15, you know, maybe a little
more.
Uh, and the the dial pan I was able to
just you, you know, I've got this one
that I already had, so I didn't have to
pay for that. So, I need the movement
and the pendulum are going to be my
expense basically, right? Um, so the
this set of stuff I paid $50 for.
Again, little heavy. I wouldn't have
wanted to pay that. And that's shipped,
right? I wouldn't have wanted to pay
that much. But this movement I would say
is worth 15 bucks, maybe 20 bucks if I
uh had a clock that I needed it for, but
I don't that I'm aware of.
So that was just kind of extra. Let me
lay it to the side and we'll look at
this other stuff. So next up we have
this here. So this is a
a gong
um you know that mounts in the bottom of
a case and it's a pretty nice one. Uh, I
don't particularly need this, but I
would value this at maybe five bucks.
What do you think?
That's worth five bucks. When I find the
case that I need this for, I'll be happy
to have it. And that'll be a one that's
in very nice shape. And that's that's
vintage. I mean, this is probably, you
know, just as old as this clock. I It's
probably a hundred-y old part. This is I
would guess usually the ones with this
mounting are in the um like the Napoleon
style clocks like the mantle clocks. I
don't have one of those in here right
now. Um
so I think my I would value that at five
bucks. So we're probably in this setup.
I've got $20 worth of value here. I got
the the movement that I don't really
need and I've got this gong that I don't
really need.
So, I'm I'm in 20 bucks so far. But then
we have this. Now, this I think they've
got this mounted upside down. It's got a
little dent in it. I didn't notice that,
but oh well. I'll be all right. So, this
appears to be the original style
pendulum dent and all, but they've got
it mounted on there backwards.
like this part should be up and this
part should be down. Um, so it would
look like that, but this whole thing
would be reversed, right? So these are
usually about $25 shipped. So I would
value that at maybe 20 bucks. Maybe a
little less with the dent in it. I
didn't notice that. Has it been painted
or something, too? I don't think so, but
it'll be all right.
Well, I guess it'll look like this. Kind
of. Tick tock, tick tock. It'll be okay.
Um,
I'd value that at 20 bucks. I hate that
dent, though. How did I not see that?
It's one of those things where I can
hang it in there and use it and then if
I get a better one down the road, I'll
swap it out. Uh, so we were in at 20 and
then we were in this 20, I would say.
But we needed this and this was there
were other ones on there but they were
like $25 shipping. Albe it they probably
didn't have the D. Whatever. I'm moving
right along. So we've got our pendulum
now that we needed and that's the
original. That's a New Haven pendulum.
So I think we have $40 worth of value
here. I paid 50.
Let me see what this is. Makes you
wonder why some of this stuff comes
comes together. It's a pendulum
for a uh Shats or I guess Shats makes
most of them for a uh
a anniversary clock. So this hangs from
the suspension and then you know it
slowly turns and it slowly turns back
and then it slowly turns back then it
slowly turns back.
Um,
unfortunately they make a bunch of
different versions of these, so it's
hard to tell what this actually goes to,
like which which version or whatever.
But I got to tell you,
I've got about a dozen of those clocks
and some of them are me missing this.
So, is this the correct one for the one
that I need? Who knows? Can you use the
wrong one? Probably not because they're
so precise. I mean, uh, you know, if
you're if you're not aware, the
anniversary clocks are called that
because they'll run for over a year
without being wound. So, this turns
around for 400 days,
you know, so it's got to be kind of
precise. So, if it's the slightly wrong
one, it probably won't work right. Um,
so I don't know if if I need this
particular one, but
that's probably worth five bucks, I
would think. You know, if you're missing
this, if this was the one that I need,
I'd probably pay $15 for it, but we'll
figure it's worth five bucks. So, I'm in
this stuff. I think I have $45 worth of
value now, right? Um, and then this
should be the correct movement, but
again, it's not the full movement.
Sometimes I wonder where people get
their packing material. Like, what is
this? I mean, it works fine for what
they're using it for, but
where did that come from? Anyway, here
it is.
That does appear to be the correct
movement.
So, what is it missing? Well, strangely,
it's missing all the all the strike side
stuff. So, it's got the time side,
but it doesn't have any of the strike
side.
What in the world? Um, so why did I buy
it knowing that it's incomplete? Well,
I've actually got a bunch of loose
gears. I don't know if I've got all the
ones that it would take to um and when I
say a bunch, I mean like a hundred or
so. Um so I don't know if I've got the
correct ones, but
I kind of like that this has the Verge
on it.
Um and
the escape wheel. You know, if you've
got a a screwed up escape wheel, you're
you're in trouble for my other So I've
got another full movement coming, right?
Um, but I kind of like that this is
extra parts. So, if I have a problem
with the escape wheel or the verge, um,
I have an extra one here. So, I like
that. Let's see, by the way, if it will
Yeah, it seems to be
I don't know. I was about to say it
seems to be lining up properly, but
yeah, it means walking.
All right, so
this will be our part one. And you know,
I've got a pendulum hanger here to kind
of tell me the
the length that we might be looking for
on the other one if the other one
screwed up. So, let's see
what it says.
New Haven trademark.
I don't see a drop symbolized anywhere.
So, if if you didn't see the other
video, oh, you know what? That is not in
the right spot. That might be
interfering with how it's walking as I
was saying.
And see, it's catching a little bit.
That may be the right verge or it may
not be. Who knows? But whatever. And if
they do catch, usually it means that it
needs to be pulled down a little bit.
It's not adjusted quite right. Doesn't
um lock quite right. Um okay. So, we've
got our great wheel here. I guess you'd
call it the first wheel.
There's the second wheel.
The third wheel.
fourth wheel
and escapement escape wheel. And then
we've got the
I guess center wheel or
um minute wheel and then the hour
tube hour wheel.
But yeah, the poor thing's had a bunch
of stuff stolen off of it. This is a
setup for the alarm, I believe. Um,
it probably is bent all the hell. It's
probably supposed to be around here
where it rides on something over here.
But we looked in our pictures and ours
wouldn't have originally had an alarm.
Um, or I think the way I figured that
out was
Look at this.
Yeah, I think the way I figured that out
was um there's no alarm holes in it.
Okay. So, next thing I want to do is I
want to just lay this in there and see
if it lines up with our screw holes like
I believe it will.
>> All right. So, I've got it a a little
bit high, but you can see and as we
noticed in the previous video, see that
little line under there? It's because
this particular New Haven movement has a
brace there.
So, it appears
that maybe that went like that or
something like that.
Okay. Okay. And then let's see on the
top.
Yeah,
that must have been it.
Maybe something like that. These top um
hangers were probably just slightly bent
slightly different on the other one,
the original one.
So yeah, that's it. So that would have
been our original Sy movement. And then
we believe this would have been the
original style face. Let's see if that
lines up.
Yep.
Cool.
And
this would hang
Something like that. Very cool. Let me
reverse this. Fix it. Put it back how
it's supposed to be. Okay. So, I think
it's meant to be something like that.
Very nice. We're going to replace the
dial
with that. Okay. So, uh, like I said,
there's a complete other full movement
coming, but I think what I'll do is go
ahead and take this one apart and put it
in the ultrasonic cleaner and just have
all the parts clean for when the other
one gets here. Uh, that'll allow me to
inspect these plates and um uh once the
other one gets here, I may be able to to
uh compare the parts for the strike side
with the extra parts that I've got and
maybe piece this one back together. Um,
we're probably missing four wheels and a
uh governor, I would guess. So, you've
got your first wheel here.
There's going to be a second one here,
third one here, fourth one here, and the
governor there. So, it's got it's
missing five parts plus the the actual
spring that's on the the the big wheel.
Um,
and I think that's it. We've probably
got the governor. I've got a bunch of
those. And it's one of those things
where if I can figure out the exact
parts I need and I see them online for
five or $10, you know, or I see a lot of
stuff that has two or three of those
wheels in it, I'll just grab it. I've
also got some other New Haven movements,
but I don't have any that are the exact
this exact one. I don't know if there's
any parts that cross over off of other
movements, but anyway, um I'll
disassemble it and put it through the
ultrasonic and um we'll wait on the
other one. All right, so this is what
we've got. Um I guess maybe we clean it
and then we can look at the the uh b see
if it needs any bushings.
We can test each
wheel in it. I don't see any that are
obviously
wrecked.
You may feel differently.
Um,
there's our spring.
I'm not good at telling if those are bad
or not. I've I've had people
suggest that they go bad after a while,
you know. Um, and obviously if they're
broken, they're bad, but I can't tell if
they're fatigued to the point that
they're no good anymore. I haven't been
able to figure that out yet.
crutch
uh pendulum u u
suspension or
whatever you call it. Pendulum leader, I
believe they call it. Poor little nuts.
The escapement wheel, which looks fine
to me. I don't see any teeth that are
screwed up.
And the lanterns don't appear to have
any considerable wear.
Even the
pinion,
if that's what you would call it, on the
end there looks pretty good. Needs to be
polished, obviously.
Uh
I don't know what they call this wheel.
This is the one that turns minutes into
hours. This is the uh uh
this this would be the u what's the the
the uh ship that went down when that guy
made the song about it and he said where
does the love of God go when the
storm turns
minutes into hours some what's that line
wreck of the Edund Fitzgerald what's he
saying
does anyone know where the love of God
goes goes
something about that turns the minutes
and hours. Such a great line. Anyway,
this is the little wheel that turns
minutes into hours. It goes beside the
minute wheel and uh
turns Let's see. How would that work?
One way or the other, it turns the
hour wheel.
Uh, and then we've got the
number two wheel. I suppose I think this
is the number three wheel, the number
four wheel, and we looked at the
escapement.
So, we've already been looking at this.
We'll, like I said, we'll clean it and
then we'll check it more carefully. And
then, of course, we've got that other
whole movement coming in. I got to tell
you though, I'll bet this thing doesn't
even need any bushings. I might put one
in if I find something rough, but they
all look pretty good to me. I don't know
that this thing got that much wear. Um,
and those are not replacement bushings
like that. That's original. If you look
at the back, it's never been drilled
out.
Same there.
I don't see any on it. It hasn't had any
replaced. Unless that's like a Is that
one of those pinches that they would use
where they beat it a little bit?
That That might be what's going on.
Like they punched it to tighten up the
hole a little bit on that one and on
that one.
But I gotta tell you, if that thing's
still in good shape,
I mean, if we get pretty good tolerance
on it whenever I put it back together,
I'm not going to put a bushing in that.
I'll leave it alone, even though it has
the punch.
If you don't know about that, if you're
if you're an amateur like I am.
Years ago, they wouldn't drill that out
and put a new bushing in it like we do
now. They would take a little a um
one of the a stake and uh they would put
it beside the hole where it was
elongated and beat it a little bit and
it would push the brass. It would
flatten the brass back out to close up
the hole a little bit. And it appears
that's what that little dot is beside
there. It's where they beat on it. See
how that hole isn't round anymore?
The edge of it flat. And they've done
the same on this one,
which ironically, or not ironically,
which um
it just goes to show are the the two
wheels that wear usually.
So anyway, but I think that movement
looks like it's in great shape. All
right, I'm going to dunk it in the
ultrasonic cleaner, get it nice and
shiny, and then uh we can test, like I
said, each of the each of the bushings,
but we're waiting on our other movement.
All right, folks. We've got our other
movement in.
Now, this one was like $30, I think,
right? I think I've got the receipt
right here. Let me tell you,
it seems to be complete if the pictures
are correct.
35 bucks.
Oh, the guy charged me That's
interesting. He charged me shipping that
made the sales tax. So, I paid 25 bucks.
The shipping was $771
and on 25 bucks the sales tax is $229.
So, that makes it where the the order
total is exactly $35.
So, he's a perfectionist.
Thank you for your purchase. Good luck
with your project. Why, thank you, Greg.
Thank you for um putting up good quality
items
on eBay that are exactly
Oh, wow. He even look, he made little
pieces of cardboard. Remember I said
he's a perfectionist? He had this like
this. He made little pieces of cardboard
so that the thing would get here in one
piece, perfectly suspended.
What a what a what a mch. What a cool
guy.
All right, let me pull it out of there.
When I pulled it out of the box, it it u
it kicked the the time side off, the
strike side off, and it went ahead and
did its thing. Hey, let's do it again.
I don't Oh, yeah. It's working because
it's in the It was supposed to do that.
Well, we know that the strike is at
least trying to work.
I mean, that's working.
It's a shame to take it all apart,
actually, but we will.
All right. So, it's the same movement as
our parts one.
New Haven Trademark USA.
It's complete.
appears welloiled.
I'll bet somebody has worked this not
too long back, you know.
Um
Okay, let's look at our
play here. Oh, you can't really tell
when it's wound, can you? I guess I
guess you can push on it a little bit.
Yeah, there we go.
H. We got one there, folks. That needs
some work.
Skate wheels moving a little bit, but
I can't really get to that one. This one
always has all kinds of pressure on it
from the spring,
but usually you can rock these a little
bit. All right, so we got two. We got
some play there.
I can't really show you the back because
I got I want to be careful. I don't want
to, you know, I don't want to set it on
that gear necessarily,
but hey, we'll do it anyway.
Yeah, we got some play there.
Need a little work.
Um,
if the if the back is exactly the same,
if it's the exact same piece, you know,
we've got that other one that doesn't
need bushings, but we might as well put
bushings in them. It's no big deal. I've
got the bushings. I've got the
equipment.
Why not do it? Okay, so I'm gonna tear
it down and clean the whole thing
because uh it's going to need bushings.
You know, the strike side isn't as
important.
Most people probably don't feel that
way, but I feel that way. If the strike
side's sloppy, what's the problem? As
long as it runs, it doesn't matter. I
don't think it matters.
I'm sure there's some reason that it
matters, but to me, eh,
if there's a lot, if there's a little
bit of slop like on that side, on this
side, I wouldn't fix it because it it's
going to strike anyway. What? What? You
don't have the u
I mean I can think of some reasons that
it it would
you could get in a situation where it
won't strike where it you know it's so
weak that it cuz you you know whenever
you have wear you you lose power
basically from the spring. Um
so I don't know. This one has the the um
calendar piece broken off.
Our other one has it on it, but uh
we don't need the calendar for this
clock.
It didn't originally have it. So, I will
I'll probably use this front plate. Um
yeah. Okay. So, let me start
disassembling it and uh we'll take a
look at uh everything laid out, I guess.
All right, I got it all apart. So, on
our parts one, um it's missing all of
the strike side stuff. Uh I think it's
also missing this lever if I remember
correctly. That's going to be probably
the hardest part to find. I can order it
probably on eBay, but I've got a whole
bunch of parts. I've got a ton of extra
wheels and stuff that probably are the
correct ones. Um,
I think you might be able to as well.
I'm not positive, but I think if they're
slightly different, they might work as
long as they fit together on the strikes
on the strike side.
So, there there may be um I don't know.
I don't know. They may have made little
slight design changes and if you use the
old ones or the new ones, it might work.
But anyway, I'm glad I took this thing
apart cuz it's way way too greased. Look
at all that oil.
Someone has just poured 3in-1 oil on
this and it's on everything. I mean,
it's all over the plates.
It's just uh
It may even be WD40, which is like the
worst thing in the world. WD40 is it
ought to be outlawed.
Uh we don't need WD40 anymore.
People just think since it's oily and
you can spray it that it's good to spray
on things. It messes. It causes so many
problems. It's fine at first, but what
happens is it dries and whenever it
dries, and it does dry, they act like it
doesn't. It does dry. After it dries,
which might take a year or two, it gets
all gummy and crap and just it does the
exact opposite of what you think it's
going to do cuz it's not really a
lubricant. It's a cleaner.
Um, so WD40 is good to oil something if
you're using the oil to clean it. But if
you're using it to lubricate it, it
ain't good at all. Check out these tools
I got.
So I go to the flea market all the time
and I've been trying to find good made
in USA tools. So I found a
nut driver set. If you watch some of my
previous videos, you know I you may have
noticed from time to time I was using a
Chinese nut driver and I was embarrassed
by it. I thought I was sending the wrong
message to my amateur repair time
people. So I looked and looked and
looked and you know they don't make any
in the United States anymore pretty
much. I guess Klein still does.
Maybe a couple companies did. But
anyway, I wanted something cool. So, I
found this awesome set of old school
Napa
um nut drivers, and they've got the
hollow inside the the hollow shaft like
the Klein ones do. Um, which makes them
really good to take off
nuts because you can slide it down over
the post to the nut, you know, if it's
recessed, if it's on a a long thread. I
use them on pinball machines a lot, but
these Napa ones are cool. I was really
happy to get those.
Okay, so uh we got to clean all this
stuff and then I'm going to look around
and see if I've got any This is This is
the strike side. I want to see if I've
got any of the strike side stuff extra.
Um, I've got all those sorted pretty
well, I think.
I believe. Um, so I may be able to look
in those pretty quick. So, these are the
ones that were missing from our other
movement. You haven't seen them yet, I
suppose.
This is the
Would this be called the warning
wheel? Because that's the little pin
that catches the the lever.
or it catches the governor
and then um
when the other one gets lifted up
it lets the governor the governor go. Is
that right? Anyway, so that's the last
one before the flag the governor
which is here. They're covered in oil.
Okay. And then this one,
that's interesting. It's got two
cutouts.
Usually, I think they've only got one.
Everything looks good.
And this is the one that This is the
What am I looking at here? This is the
first wheel. The second wheel.
Works just fine.
Sometimes this wheel,
it's hard to tell from the
um
from the time side. So, let's see how
different they are.
They're completely different on these
because it's got that extra gear on the
top,
which I think
has to do with the hour wheel, the count
wheel, I guess you call it. Okay. So,
I'm going to clean all this stuff and uh
we'll see how it looks after it runs
through the bat.
So this is what it looked like after we
got it all cleaned. So first of all, all
the pendulum. So um all of these are
brass, but this is plated.
That's why it dented, you know. Um
so whenever you clean these in an
ultrasonic cleaner, you got to be
careful with plated stuff. It will take
that right off if you leave it in there
long enough.
So, all of this stuff I left in 20
minutes and I did it in I think three
different batches. And then this I left
in uh I think 12 minutes and it cleaned
it up really well.
But you can see even there it was
starting to
what it'll do is it'll it'll turn it all
black like the back is.
And I don't know if it's just taking the
plating off or if it's like an
electroplating type process. I don't
really know how electro plating works,
but it might be doing the opposite of
that where it takes the plating off of
this and puts it on something else or
something. I don't know, but there's
something like that going on. I've had
it do it to things. So, if you've got
something plated, be careful in an
ultrasonic cleaner. Okay. So, all of
this, this is the uh the the movement
that had no strike side.
It's actually in better shape than the
other movement that was complete,
but that's fine.
Okay. And then here's all the time side.
So, this is all the stuff that matches
all that. So, all of that is all of
this.
And then this is the stuff that we only
have one of, but I have a whole bunch of
these uh wheels and stuff that I got.
Well, I've picked up in several places,
but I I bought out a uh an entire
collection from a guy's family that had
passed away, and he was a hoarder. So,
he had stuff thrown all over his
property, and they had went around and
cleaned up some of it, and then others I
was just grabbed while I was there. They
were helping me throw stuff in my truck.
I did a whole video on that that
escapade. If you if you want to see it,
it's here on our channel. There's an
entire playlist of clocks we have
attempted to repair here on our uh
channel and uh there's a video all about
that. Well,
so
because I bought all that stuff from
that guy, he had parts all over the
place, just stuff laying everywhere and
uh half put together clocks. Uh uh the
whole place smelled like dog feces,
unfortunately. It was a really good
video. You ought to check it out. Got
some pictures and stuff. Um, not of the
dog feet. I didn't take pictures of
that. Okay. I'm just talking I've just
took pictures of the clock part. Look,
people don't even Why' you even think
like that? So, I may have some of this
stuff. Uh, I've got it somewhat sorted
out. So, I'm going to go look and see
what I've got. So, here's what we need
if we're going to try to complete this
movement. The first thing is there is a
lever here.
A lift lever I guess you call that. So
the way this works is I can probably
just show you how it works.
This is the minute hand.
And so I think it's
Are we under it?
I can't remember if we're under it or in
it. It might be between it. So, as this
turns, the minute it's turning, you can
see the little blade there.
It gets to a certain point
and it lifts that up. Now,
I guess it drops back down.
Do I have that right?
Maybe we're under it the whole time.
No, we're not under. So, I was right.
So, that's like that. So, as it turns
around,
it lifts that up. Now, why does it lift
that up? It's a 30 minute thing.
And then it does it again at an hour.
That's what kicks the uh the clock out
of warning. So, it's put in the warning
and then it's held and then as that
spins around that lever lifts up the
other lever just enough that it drops it
out of warning and it starts to strike.
Uh, so we don't have that piece although
we have the post. So, if I could find
that, that would be cool.
So, that's one. Uh, the second thing is
the actual hammer
we only have one of. And if you look, it
has a rubber
piece on the end of it. I don't know if
that's newer or if that's how it came.
You know, a lot of these had leather
mallets or or faces on the the mallet.
Okay, so we need one of those. I don't
know that I've got that.
The entire wheel assembly is missing.
you know, may have that.
The spring I definitely have.
So, that's one, two, three, four.
Um, count wheel. I've got that. Five.
Count wheel retainer. I've got that.
Six.
Um,
second wheel. Third wheel. Fourth wheel.
Seven. Eight. Nine. And then the count
lever
10. Oh, wait a minute. And the governor,
the flag, the fly 11.
So, I've got 11 parts here that I need
if I was going to
complete that one. I think what's
probably going to happen is we build up
the one and then I put all the other one
in a box. Um,
maybe I'll reassemble it just so it
doesn't get messed up and we'll put it
in a box by itself and as we find parts,
we'll put it with it. But, um, let me go
see if I can find anything obvious in
the other room. I'll bring some of it in
here so you can see what I'm looking at.
So, I've got about five times this many.
Um, and so one of the first ones I'm
looking for is this, which is the number
two wheel, I believe.
I think has something to do with turning
the um count.
So I I actually found one
from the guy's hoorde stash, but
unfortunately one of the teeth is
mangled.
Might be able to fix that, but I'm not
sure.
But I believe that's the exact same
part.
So he did part one. So maybe I can find
the other part. One, two, three, four.
So it's got six spokes.
Six spokes. Yeah, I think that's the
exact same part.
Okay, let keep looking. Well, I looked
through everything I got. I don't have
the right levers. Got all these levers.
None of them are correct
um for that one or that one. And I did
find that one wheel.
It's correct, but it's damaged. Now, you
know why that happens? It's because uh
if the if the um
if the spring breaks, it'll do that.
When the spring breaks, it
let's lets loose very quickly and it'll
knock the tooth off that was meshed at
the time.
Uh so, that's that. I did find a little
clip for a count wheel. It's slightly
different, but it would probably work.
But I don't have that type of count.
I've got one that'll work. It's the same
size, but it doesn't have the half
hours.
So, this particular one, see how there's
two of each? That's so that it can
strike uh so like for instance here,
it'll be buried here and it'll go d
and strike five and stop. And then the
next time it's released, d it'll strike
once and stop at the half hour. And then
it'll strike six times and stop and then
once and then seven times and stop and
then once. So it's just a it's a half
hour
wheel. So I don't have it either. So in
other words, we're just going to have to
rob whatever parts we need off of that
one, which I don't think we need any,
but we'll use whatever we have to off
it. And uh that was the setup that came
with the pendulum, though. And I got
that other uh movement with it, so
whatever. I'm cool. We'll use it for
parts on something down the road, but um
this will be the one. So, we got to put
it all together. We got to
fix our dial and then we got to make
sure it runs. So, uh you know, it's been
a long day, though. I think we'll wait
till next time to do that. And for now,
we'll just listen to some music. So, I
hope you enjoyed the video. Let me know
what you think so far down below.
Do you think we'll ever get it ticking
and talking again? I think we will. But
we'll see you on the next one here at
Amateur Repair Time.
[Music]
Sitting on a desk
[Music]
and thrifting old
[Music]
last
[Music]
Old spots
tracing faded
vacuum to blows. Get it back to working
by the end of a show.
Bringing broken gadgets back to life.
Turning silence into stories one at a
time. We fixing to fix some. Easy as can
be. amateur at bedtime for you and me.
[Music]
Little machine carried history. Time to
trace your pattern
from open to singing. presets
[Music]
tangled up
[Music]
patient searches
[Music]
clocking
[Music]
please Brand
new
[Music]
tracing faded traces back into ghost.
Get it back to working by the end of the
show.
Bring broken gadgets back to life.
Turning silence into stories one at a
time. We're fixing to fix up. Easy as
can be. I'm at time for you and me.
[Music]
It's
time.
[Music]
It's
time.
[Music]
It's a short time.
