We get a lot repaired on this one! Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's
Classic Video Games back with another
cool arcade game repair video for you
this evening.
We've been working on this baby Pac-Man
machine.
If you haven't seen our previous video,
go back and watch that. But basically,
we started working through the boards.
We got the MPU going.
We checked our voltages.
I had to order
a chip here at U16.
We're kind of waiting on that to come in
to keep moving along with that. But
next, we're going to start tackling this
monitor. We're going to take that
monitor out, put a cap kit in it,
reflow,
all that good stuff. And hopefully in
the next day or two, we'll get our chip
for the video board
and we'll be able to finally boot this
thing up. But let's get that monitor out
and get working on it.
All right, I got the monitor board out.
It had never been out of the cabinet
before because the ground wire had never
been cut. You pretty much have to do
that to take it out. It's got all
original caps.
I checked the fuse already.
So, the fuse is good,
which pretty much tells me that the
flyback's probably good
and the horizontal output transistor is
good.
Usually, if one of those two things are
bad, the fuse will go.
And one thing you got to check on these
4900s, 4,800's,
see how that says power there? They've
got these little jumpers here from there
to there, from there to there,
from there to there.
Sometimes you'll get bad solder on those
and the power won't be getting through.
That happens a lot.
I've already checked those and they seem
fine, but I reflowed them anyway.
And this resistor here was really loose.
You always have to reflow the big
resistors like this because it's they're
hanging in the cabinet, you know, and I
guess the weight of them over the years
will make them break loose. So, anytime
you have a big resistor like this on the
board, you always have to reflow.
These things are getting old now.
And you always kind of inspect it for
bad solder. I noticed there's a pretty
bad solder joint over here on the
voltage regulator.
See this one here?
I don't know if it's going to focus good
enough.
It's worse on this side actually.
See that ring around it.
You just have to look for spots like
that.
So, I'm going reflow this. Of course,
always reflow the header pin where the
colors plug in. Red, green, blue,
ground, sync. Always do these up here,
too. Those are the other sink wires.
Sometimes you have your sink hooked up
up here. Sometimes you have it hooked up
up here. But just go ahead and reflow
all 10 of those.
And you got to change all the caps.
Don't just change one cap. Go ahead and
change all the caps.
You can order a kit, a cap kit online
that'll have all the caps that you need.
So, I'm going to go through one at a
time. change all these caps,
reflow everything,
and we'll put it back in there and see
what happens.
Got the monitor back in there. Got
everything hooked back up
now. Let's see.
Let's turn up the fly back. See if we
got anything.
Yep.
So, we fixed our monitor
and we don't have an image on it because
that chip that we're waiting on actually
has to do with the video. Remember,
that's the video board
and that chip runs the display
apparently, so they say.
So, got the monitor working. We got the
pinball part booted up. I don't know if
it's going to coin up without that video
board working.
I don't think that it will.
I don't think it'll
fully boot
unless you get all six flashes on this
the MPU, which we have, and you have to
get 10 flashes on the video board before
it'll fully
boot.
And if you look on that one chip that
we're waiting on,
it even says video.
So,
we're waiting on the video chip.
Hopefully, it'll be here in a few days,
but we're working right through it.
We're making pretty good progress.
If that chip fixes that ninth flash,
we'd be about home free, I think.
But we'll see.
All right,
I got the package in there. Twisty Wrist
Arcade.
I wanted you guys to see me open it. I'm
doing it live.
Oh, come on. Now the peanuts going to
get everywhere.
Well, I just broke them.
All right, I got the chips.
I ordered two of them.
I've actually got another Baby Pac-Man
in storage,
but it's been it's in a lot worse shape.
All right,
got the chip out.
Now we're going to put it in
without even
cutting the camera off. Hopefully, if I
don't turn it off by mistake, taking it
out of the tripod.
We're still going. We're still going.
All right. Now, we're going to see
If Clay was right,
I went ahead and took this one out just
for the so I could do it all in one
take.
Come on, baby.
It's hard to get the tip in there with
one hand.
All right,
I think we're good.
And the door keeps wanting to close.
All right, I think we're in there now.
Notch is going up. You got to make sure
that notch is going the right direction.
They all have a notch going up.
All right.
So,
here we go.
There's our little LED. We're wanting 10
flashes or at least more than eight.
Remember, we had eight before. Here we
go.
One, two,
three, four, five, six, seven, eight.
Oh, come on.
Wow, that stinks.
It must be one of the chips
>> that drives that.
All right, so we're back to this video
board.
And if you watch the previous video,
I was thinking I wasn't getting the
ninth flash,
which would have meant U16 was bad.
So when Ronnie was editing the video,
you know, he edits all this stuff
together,
he noticed that the eighth flash wasn't
going off on the LED. So
even though it was lighting up eight
times, it doesn't really count that
eighth flash till it goes off is what he
said. So
I need to go back to the eighth flash.
So, I need to see what what uh Clay says
about the eighth flash. But I'll show
you what it's doing.
One, two,
three, four, five, six, seven, eight.
See how it's staying on?
Yeah. Well, apparently it doesn't count
that eighth flash till it goes off. So,
we're hanging up on the eighth flash
instead of the ninth flash like I
thought.
So, let's go see what Clay says about
that. Eighth flash.
The 6809 CPU chip at U8 attempts to test
the PIA chip at U7. If the PIA is good,
the eighth LED flash is shown. If there
is no eighth LED flash, the PIA at U7 is
bad.
So, remember we were thinking this, we
were down here, but we need to step back
to go back to the eighth flash because
that's not turning off.
So, we're going to check out U7.
All right, there's U7
6821.
So, we're going to take that one out and
swap it and we'll try it again. All
right, here we go.
One, two,
three, four, five, six, seven, eight,
nine,
10. Oh yeah, buddy. We're going to make
that money. Let's see if it booted up.
Oh lord.
Well,
my monitor's going crazy. Could I might
be able to adjust all that out, but
we'll just see if it coins up or does
anything
or it's trying to do stuff. Do you see
my
It started a game cuz it tried to do the
drop targets up there.
My sink's off.
I think I better start adjusting this
monitor to see what it says.
All right. So, I started adjusting it.
You can see that it's actually up on the
screen.
So, we're booted and everything, but my
sink that's I don't have any sink.
That's why it's going at an angle like
that. And I can't adjust it out.
So,
it's got those
junk displacement connectors on it on
the monitor and they come all the way
over down
and it plugs right into the video board
here.
So, I must have a bad connection on
here. So, I guess I'm going to repin
that connector and the one on the
monitor also. See if that does it.
So, I was getting ready
to change the connector
and see how it was going in and out.
I noticed
this Vidia board
has a sink adjustment right there.
And if you play around with this pot,
it'll snap in and out.
And these pots are junk. They're just
bad quality.
So, I'm going to take this board out and
change that sink pot.
I may have to change some of these other
ones, too.
We'll see how that goes.
But, you saw it on the screen a minute
ago. It's working.
So,
we're getting there.
All right. I got the board back out.
It's my sink pot there. I'm going to
change
I think I'm going to go ahead and change
all these. They're all different sizes,
though. I know the sink one is a 10k
ohm. The green looks like it's a 10k
ohm.
I'm going to change this volume down
here, which is a 1k.
And
I think I'm going to go ahead and change
a few more of these caps, too. Remember
those two that blew up that first time
over here?
I notice there's a few other ones
around. So, I'm going to change those
two.
Try it again. So, we're going to change
all the pots and a few more of the caps.
We've already went through and reflowed
all the connectors. I've already cleaned
all the chips.
So, we're getting pretty close. We just
need to
kind of go through and do a little bit
more preventative stuff, I think.
I've got uh I've got all these pots up
here, different sizes.
So, there's my 1K ones.
There's the 10K ones.
Stuff like that. So, I'm going to go
through knock it out. All right.
I put five new pots on it
and I went ahead and changed the rest of
those caps.
Those
are the ones that caught on fire in the
beginning of the first video if you
didn't watch that one.
So,
I think we're going to put it back in
and try to get the monitor all dialed
in.
[Music]
Heat. Heat.
Heat.
[Music]
[Music]
Heat. Heat.
[Music]
Heat.
[Music]
Heat.
Heat.
[Music]
Heat.
[Music]
Heat.
[Music]
Heat.
[Music]
Heat.
[Music]
Well, well, what have we here?
Joey has gotten our baby Pac-Man running
and he has cleaned up the playfield a
little bit
and we're going to touch it up just a
little bit. Now, you may notice this
whole thing's pretty dark. So, like up
in these top corners, you can't really
see it even that much. So, if we're
looking for wear, this thing is actually
in pretty nice shape. Um, there are some
burn marks right there. I don't know if
he mentioned that, but I have no clue
what that came from.
That is really strange. They're
perfectly round.
I wonder if for years and years there
were some rubber rings sitting there
that were outgassing or something weird
and it kind of scorched the the paint
and the wood. I don't know. I don't know
what would cause that. It's perfectly
round
and it almost looks like it moved over
time.
Um, and that will not clean off. So, I
don't know what that is.
Um, so we're going to leave that. Now,
you could sand that down and restain it
and all that or reclear it. I'm not
going to mess with that. There's a
little bit of wear there, but I think
what we'll do is clear over that just to
make it where it won't get any worse.
Um, the stuff like this is just the post
is going to cover it. You won't even see
it. So, we've got a little bit of wear
here in the middle around the arrows
where if we touch up the black, it'll
make it look a lot better. There's just
the slightest little bit of wear right
there. Again, if you touch up the black,
it'll hide most of that.
Same thing here. That's not really all
black, but it's dark enough that if you
did it black, it would look great.
Um,
just a little bit in the maze, like
around the two and the three and the
four there.
This looks pretty good over here.
There's something going on there. I
don't know that we'll worry about that
too much, but maybe. And then there's a
little tiny bit of wear here on the
baby. And that is kind of right where
you're looking.
So maybe we draw the black lines back in
on that and then see if we can touch it
up a little bit. Little tiny bit of wear
on the stork. So we're going to touch it
up just a little bit with acrylic paint.
Um, and then we're going to clear over
it to protect it. Uh, there's a little
bit of wear here.
I don't know that I can do anything with
that. I mean, I I can, but I don't know
that I can easily do anything with that.
We might try our smear technique. If we
do the blue,
we don't really need blue, though. I
guess a little bit would work. We'll
just see what we can do. I'm not
concerned with making it look brand new.
It looks pretty good already. I would
say cleaned up. That would be like a
seven.
You know,
if we could get rid of this and this,
it would make it much nicer.
So, we'll see what we can do. So, the
first thing I'm going to do, we've
cleaned it all up. Um uh all of the the
wax has basically been taken off of it,
but with the magic eraser that Joe used,
um we've got it pretty clean. And I'm
going to take a black acrylic paint pen
and draw the black lines back in.
Basically like a big coloring book. Um,
just to make it everything that alone
will make it look a lot better. Like for
instance, this spot up here that wear
well the black's worn away and a little
bit of the yellow's worn away. But if
you draw the black back in, your eye
will kind of fill in the yellow.
So, you don't really need to touch up
the yellow even though it's missing a
little bit. Um,
and it's just a thing. Okay. So, I'm
going to I'm going to draw some of the
lines back in. We'll see if we can get
it looking better just from that.
All right. So, I've got a black acrylic
paint pen.
Um,
Pusca Uni Pusca brand. Of course, we
would have that right in there in the
middle of the game where you can't get
to it too easy. Might be a better idea
to take it out.
to work on it.
H a little better.
Um it's one of those things too where
you can make that even straighter if you
touch up the yellow. you could get that
line perfect where it's bleeding a
little bit because of the texture of the
wood. You can put paint on it and tape
on it too and do it. The problem I've
usually had with that is that the the
ink bleeds under the paint. But it just
depends on how much effort you want to
put into it. I guess
one of the things I've noticed is that
whenever you do this, you are going to
be much more critical on yourself than
people that don't know that you did
anything. So you just saw me do that.
And so whenever you look at this, you're
going to look for that and you're going
to say, "Ah, look, the line's not quite
perfect up there. It's not quite right."
Because you know it's there. But if
somebody doesn't know it's there, and
I've proven this over and over again. If
somebody doesn't know that it's there,
they don't even see it, you know. So,
cuz it just looks like a little bit of
wear. So, I'm going to ink in
some more of the black here in the
middle.
Um, I'm literally just going around with
the light shining on from under it and
inking in uh the black areas that are
worn away.
Now, if you're doing this all over the
playfield, you're going to have to clear
coat the playfield, especially since
we're using this acrylic paint.
The reason I use acrylic is because when
you clear coat over it, it doesn't run
because the catalyst in this in the
clear coat spray paint
doesn't react badly with the acrylic
paint. If you use a oilbased paint,
it depends on how it's made. you any
kind of oil the um the clear is not
going to stick to which is why you got
to get all the wax off the playfield
before you clear it. So we
don't even show people us clearing it
because we don't want people to just go
start spray painting it on their
playfield. Like if you've got this one
little spot to touch up and you do that
and then you go get clear coat and spray
paint on it, you're going to make the
biggest mess you've ever seen in your
life because all of the wax on the
playfield and most of them were have
been waxed, you know, a dozen times,
maybe more if they were actually taking
care of the machine. Um, these older
ones at least, it was very common to wax
the playfield.
They even suggested it um from the
manufacturers. So if you spray paint
over wax,
it just bubbles up and you get all these
little u orange pill they call it or
whatever or fish eyes they call it. You
get all these fish eyes on it that just
look horrible and you end up with a big
mess that you can't easily repair. So,
we don't even show people us doing that
because we want to make sure that you
have to listen listen to us to before
you do it. You've got to get all the wax
off the playfield. We did that because
we use the magic eraser to get all the
wax off the playfield. You can use NAFTA
or whatever you use to to clean it up.
But the way we do it, we we're always
working on playfields that are heavily
worn. We scrub it down with the magic
eraser. That takes all the wax off of
it. It kind of dulls it a little bit.
You're basically that that magic eraser
is basically like sandpaper. You're kind
of sanding the finish down a little bit,
which is one of the reasons it looks
clean. Once you've got that, then you
can spray a clear coat over it and you
won't have any issues. But, and for
clear coat, we just use a rattle can
spray paint like uh we like satin
finish. Some people use gloss. I think
it doesn't look like the original finish
if you use gloss. Um I think the
original finish is more of a satin
finish, so I just use that. But that's
what we do. So, I'm going to go through
and touch up some more of the black and
then we'll move on to the next color.
Okay. So, I've inked in the black. Got
it looking pretty good. That helped a
lot, didn't it? I think so. There was a
real bad one over there. And this is
what I use.
Pusca. Get you some of these. Let me see
if I can show you.
Look at that. made by Mitsubishi
actually
in France
and it's it uses Japanese ink made in
Japan.
I love it. So, u if we can get it to
focus.
So, if you want this specific type,
we've got them on our website. You can
order them. We use black. Um,
there's other colors, too, but you know,
usually nothing's going to match except
black. Even white is not going to match.
This originally probably was white. I
guess that is. Yeah, it's about the same
color. Um, so if you got a new white, it
would just wouldn't work for this what
we're doing here because the the
original color has faded. So, whenever
you match it, you're not really matching
a solid
primary color. you've you're matching a
faded version. The exception is black.
It usually pretty much looks black. It's
slightly different, but your eye can't
really take it pick it up. Like you
can't see where I touched up on that
maze.
All right. So, uh I think next we will
touch up the yellow a little bit.
There's just a little tiny sliver here.
Barely there. And I might be able to
straighten up that line up there just
barely with a little bit of yellow.
Yellow is like one of the hardest colors
to match because it's so thin and
there's your eye can just see that it's
different. With that said, in this
instance, since we're only doing the
very smallest little part, I mean, you
could get away with not even doing that.
Since we're just doing a little teeny
part of it, it's going to be hard for
your eye to catch the difference in it.
I'll also mention, like I always
mention,
um, this paint on these playfields,
what's happened to it is the red has
faded over the years.
So, the red in the in the paint has
faded away. And the opposite of red is
green. So, whenever you take red away,
it makes everything look slightly more
green. So, there is actually red on the
playfield. So, it's not completely gone
or anything, but it's just not as red as
it would have originally been. Also, the
blue has less red in it than it
originally would have had. Same with the
yellow. Everything is slightly more
green than it originally was. You can
kind of tell if you've got a good eye
for color. You can tell that's that's
not really yellowed. That's more green,
right? So, um everything is kind of
greened out a little bit. So, whenever
you match a color, if you lean towards
the green side,
um like if you get a if you get a yellow
that looks similar, if you put just a
little bit of green in it, it'll
probably make it even look better, more
like the the faded paint on the
playfield. So, I'm going to try to mix
up some yellow or get something out of
the bottle that's close enough and we'll
touch up literally those two little
spots and then on to the next color. All
right, folks. Now, keep in mind, you're
going to be playing this at a distance.
So, this is as close as you can actually
even get to that drop target back there.
You're never going to get closer than
that. If I go all the way down to where
the glass is going to be, and then we we
imagine that thing's back in there where
it goes, you're going to be about This
is about as close as you can get with
the glass on it. You tell me what you
think. I think it's pretty decent.
All right. And then the one up here, you
can get much closer to because it's
going to be right here and the glass is
right there. So you can get pretty close
to this one.
What do you think?
Much better, I think. So I had a golden
yellow that right out of the bottle is
almost a perfect match.
Can you tell that that's a little green?
Can you tell that?
So that's yellow, but it's kind of a
greenish yellow a little bit.
So that's why I picked that one and then
I held it up to it and it looked pretty
close and so I did it.
I think that's pretty good.
And again, you have the thing where you
and I know it's there. Other people
don't know it's there. If they go
looking for stuff, they might find it,
but probably not. Similarly, I think I'm
going to leave the blue that's missing
beside those arrows because there's a
little bit of problems with blue here
and there and those arrows.
This is how I think about this stuff.
First of all, I'm not capable of getting
it perfect. So, you just throw that
right out the window when you start.
You're probably not either. Some of you
are, but most of you aren't. I'm not
capable of getting it perfect. So,
there's an art to knowing when to stop.
do so much. When you get to the the
limit of where it's going to make it um
noticeably better, stop. Just leave it.
So, think about what's going on here.
And you have to think about you have to
look at it with fresh eyes. You can't
look at it like with a critical eye
where you're you're trying to fix every
little thing. This is a big problem
people have. I've seen people they'll
take a pinball machine and completely
restore it. And what they what they'll
do is they'll replace everything with
brand new if they can get brand new. But
the problem with brand new, and I'm not
saying this to insult anybody, cuz you
know that my whole point is I'm not
perfect. You know, I'm not trying to be
perfect. I'm not saying this to insult
anybody, but reproduction artwork parts,
it's almost never as good as the
original stuff.
And you can tell that it's a
reproduction. You can tell that it's a
brand new part almost every freaking
time. So, if you need the brand new
part, yeah, put it on there. Thank God
you've got it. But if you don't need the
brand new part and the thing you got
like a nine or an eight, just leave it.
Don't put new stuff on everything
whenever it's vintage games. Now, if
you've got a brand new game and you've
got a broken plastic, yeah, put a new
plastic on it. Um, but anyway, my whole
point is you got to kind of know where
to stop. So, look what we've got going
on here. There's a lot of blue and then
there's white everywhere. And when you
look at this, you don't go there is a
blue line with a black uh outline around
a green arrow. There are white lettering
that says 2000. You don't see that.
Whenever you look at it, you just go,
"Oh, look. Cool. Oh, there's baby
Pac-Man. Oh, there's the red ghost or
the pink ghost, purple ghost, whatever.
The red ones over there." That's how
your brain thinks. You go, "Oh, look.
There's fruit up there." Oh, yeah. I
remember the fruit from the game. What's
that say? uh 2,000 4,000 6,000 8,000. If
there's a little white line beside the
arrow, you don't even notice that
because it looks like some of the other
white stuff that's going on. Like look
how the six seconds. Look how bad I
screwed that up. Look. Oh, look at that.
It's supposed to say 6 seconds in black
and then I've got white paint all around
where I didn't get the blue all the way
up to it. Well, you know that that's
nonsense. I didn't paint that. But
that's how the design is. The design is
there's a black lettering with some
white behind it that's kind of sloppily
done. Well, who's to say that there
isn't white behind the left side of that
arrow? Your your mind is not going to.
People are not even going to notice that
that's where. They're going to have no
idea that that's where, even though it's
not on the 2000.
All of this stuff has a registration as
well, and the registration's always on.
So, the arrows are a good example.
It's printed closer to the left than the
right. Like the arrows aren't quite
centered because it didn't line up
perfect. And there's stuff going on like
that all over the place. Um it's just
not perfect. So like that that light
there is not centered in that brown
in that
right over here. It's too far to the
right than the left. There's crap like
that all over the playfield. If there's
one little thing,
if I mean, if you want to go through the
trouble to try to to try to uh touch it
up, go for it. That's kind of borderline
there. But if if I get that blue far
off, you're going to see a blue line, a
blue line, and a blue line, and nothing
else has a blue line. It's going to
stick out to you. This has some little
white lines like the white dots, the
white wing, uh the white lettering, the
white lettering on the arrow. So, you
got to just think about what you're
doing. You know, if you
don't don't do everything that it's
possible to do, you're going to end up
with a big mess that looks like you've
touched it all up. If you look at this
one right now, you can't tell I've
touched anything up. You can't tell cuz
I haven't touched hardly anything up.
All I did was touch up all the black ink
uh and a little bit of the yellow,
you know. So, we're still in that we're
still in that stage where it looks
better than it did and you can't tell
that I did it. Um,
so that's what that's where that's how I
look at it. Now, the only thing I'm
going to do is I got to mess with that
pink because that doesn't look quite
right. Um, so I do want to I do want to
fix that. So, I'm going to see if I've
got a pink that's even close to that.
Pink is notoriously hard to match.
Again, it's a really thin pigment, so
whenever you go to paint it on, it's not
going to cover very well. But, we'll
see. We'll see what kind of pink I've
got. Now, here is the
the acrylic paint that I used. Golden
yellow. This stuff is like a dollar a
bottle. You can get it at Michaels or
Hobby Lobby. Um, and it's acrylic.
That's what's important because you want
to be able to spray paint over it with
just regular clear coat. Um, you can
also use the Max 2K stuff if you want to
use the two-stage stuff or whatever
that's called. Um, that works just fine.
It's actually better than using rattle
can paint because it's a much harder
finish, but it's more like a uh
automotive clear coat because it's
two-stage. Um, and if you want the pins,
I mentioned they're on our website. Our
website's lionsarcade.com. There's a
link down below and we've got all kinds
of stuff on there that we use whenever
we do uh repairs. You can check out some
of our things that we use. There's links
to Amazon on there. If you follow that
link, maybe you follow the link over and
you look at these pin these pins and you
say, "Wait a minute. Those things are
damn near $3 a piece. I'm not paying
that. That's highway robbery." But while
I'm on here, I think I'll buy uh a new
jukebox for myself. And you spend
$10,000 on a jukebox. Well, since you
followed our link uh to Amazon, anything
you buy on Amazon for the short period
of time after that, it gives us a
percentage of. So, we appreciate
everybody that's been doing that. We've
even had some people, now you're not
even going to believe this. We have had
some people that just bookmark our link
to Amazon since it has our little code
in the URL or whatever. And then every
time they go to Amazon, they're going
through our code and we get a piece of
their purchase that they buy on Amazon.
Can you believe that people would be so
nice? But some people have been, so we
appreciate that. All right, so uh let me
see if I got any kind of pink. That's a
weird looking pink.
I don't know. It almost looks like our
good old friend uh rzleberry,
but I don't think it's quite rasleberry.
So, I'll see what we've got and see if
we got anything close to that.
Razleberry. It is. It was rasleberry,
but it wasn't. It was a little bit
lighter than rasleberry. So, what I did
was I took some pink that was a little
lighter. So, the pink was too light and
the rasleberry was too dark. I mixed
them together until I got something
pretty similar
and then put it on. So, you can see the
texture difference, the sheen
difference. See like that, you can see
where I've done it. Um, but if you don't
take that into account, it's pretty
close. So, my rule of thumb on something
like this is if you can't get it exact,
and you know, you might be able to get
it exact if you keep messing with it,
but it's so close
that I'm not so sure I can move it just
slightly like that. So, it's like
1% off, something like that. It's a
little bit too purple. Just barely. You
can barely see it. Um, so my rule of
thumb is if it's slightly darker than
it's supposed to be, I leave it and
that's where it is. It's just slightly
darker than it's supposed to be. If it's
lighter than it's supposed to be, you
will notice it. Your eye will catch it.
But if it's darker than it's supposed to
be, I just run with it if it's if it's
close. And to me, that's pretty close. I
don't think most people are going to
notice it. You've got wear here. you
know, your eye is already conditioned
where you're going to see that the thing
has a little bit of wear. You're never
going to notice that that's slightly
darker than it's supposed to be. I I
would bet you
nine out of 10 people, you could say,
"Hey, did you see where I touched up the
paint on the playfield?" They would not
notice that in the first couple minutes.
They'd have to really look. A matter of
fact, I don't think they'd notice
anything. I don't think they'd be able
to tell where I've touched it up. They
may eventually find that. I think that's
a more um it's a little more off than
that is. But I guess we'll see better
after we clear it. But yeah, I'm done.
I'm just going to leave it like this. So
I think we started What did I say? I
thought it was a seven when we started.
I I really do think it's an eight now.
So we just moved it up just a little
bit. Made it a little bit nicer. Um I'm
not sure that it's possible to get it to
a nine. You could touch up this blue,
but the problem with that is going to be
you're going to you're going to be able
to tell that it was touched up. Um,
so we're going to run with this. Another
thing I should mention, and I kind of
talked about it earlier, the playfield
is so busy. There's so much art and
shapes and dots and stuff and clouds,
like all these little clouds and figures
and like, you know,
like I mentioned with the white over
here. Look at that net. That's all drawn
by hand. And it's that's not perfect.
It has inconsistencies and it's thicker
and thinner and all that. People get so
caught up in trying to make everything
perfect when on a lot of this stuff, it
doesn't need to be perfect. Nobody's
ever going to be able to tell. You know,
if if if I ask somebody, hey, did you
see where I where I repainted the
playfield? They might say, oh yeah, did
you do the net? Cuz it's not quite
right.
Right. It's just somebody's line art.
Since this isn't geometric shapes, it's
all kind of just handdrawn looking
stuff. If you get it a little off, most
of it people aren't going to aren't
going to notice. So, that's my excuse.
And uh I think we did good work here. Uh
we just touched up the stuff that was
blatantly obviously wrong and we're
going to roll with that. So, I'm going
to clear it. Joey will come back and wax
it and uh put all the stuff back on it.
Now, you may notice that some of the
light bulbs are out and stuff. The
reason for that is because uh well, I
guess those turn back on. Um we wait
till we wax it and then we change all
the light bulbs because basically you're
going to get wax all over the bulbs
whenever you do it. So, uh I'll clean up
and we'll see what Joe can do for us.
So, this is what we're
starting with before the clear.
[Music]
Wow.
[Music]
Oh yeah.
[Music]
Oh yeah.
[Music]
Oh
[Music]
yeah.
[Music]
Wow.
[Music]
Yeah.
[Music]
Heat.
Hey, Heat.
[Music]
Oh yeah.
[Music]
Wow.
Wow.
Yeah.
[Music]
Oh yeah.
Oh yeah.
[Music]
Oh yeah.
Oh yeah.
[Music]
Oh yeah. Yeah.
[Music]
[Music]
[Music]
Hey,
[Music]
hey, hey.
[Music]
Heat. Heat.
[Music]
[Music]
Hey baby. Hey
[Music]
[Music]
[Music]
Heat. Heat.
Heat. Heat.
[Music]
[Music]
All
right, we got the play field finished
up.
It's working.
Ronnie did a good job on touching up the
playfield. I couldn't really even tell
really.
I see that. I knew, but I knew it was
there. You know, if you didn't know it
was there,
you probably never see it.
But anyway, I think that's probably
going to do it for this video. We got
the game working.
And in the next video, we're going to do
one more video. We're going to finish up
the cosmetics. So, I'm going to clean
this up.
Uh may end up painting the yellow again.
I'm not sure.
I like to paint the black on the inside
and make it look a little bit better.
Put the bezel on and then uh probably
pass it off to Ronnie. He can do the
little light bulbs. And I'm sure it's
going to have some problems. The the
drop targets ain't quite right. And
there'll be some odds and ends stuff
that we got to tinker with. But anyway,
that's going to do it for this one.
Thanks everybody for watching and we'll
see you on the next one.