Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's
Classic Video Games back with another
cool pinball repair video for you this
evening. We have been looking at this
customer's beautiful 1976 Ballet Freedom
pinball machine
and uh we figured out that it's an
import. It was in it spent some time in
the Netherlands and it made its way back
and um
we got to work on the playfield a little
bit. We had a customer bring it to us
and drop it off and wants us to put the
number on it. So, we're going to do it.
The playfield's a little worn. We're
going to put some special super duper
pinball rubbers on it.
Look at that. He's going to be so happy
to see that.
Um, so we're going to go with that. We
did that in a previous video or we had a
customer that had done it in a previous
video and he really liked that look. So,
we went ahead and ordered that kit for
it. So, that's what we're up to. Now,
the playfield itself
has basically worn evenly. There's
really not a lot of damage to it. It's
just worn. I'll show you what I mean.
And first of all, there's a bunch of
kind of like I hate saying the word mold
because everybody freaks the hell out.
It's not It It kind of is mold, but it's
it's more like mildew. You know, if I
say mildew,
you don't have a conipion fit and think
that you're dying, right?
It's mold, but it's kind of like mildew.
All right. Think of it like mildew. So,
there's a little bit of
stuff on it. We're going to clean all
that up. Get rid of that. Um, it even
kind of looks kind of dusty in parts.
You know, there's mold on pen.
Penicellin's made of mold, folks. It's a
It's a miracle drug. Don't worry about
it. Um,
so it's got a little wear, but nothing
crazy crazy.
I'll just show you what we're starting
with.
All of the plastics look to be in good
shape.
Got a little wear around all of the
inserts like typical. Little bit of wear
to the left of the pop bumpers there
between the pop bumpers because you just
get a lot of action right there.
And then there is wear up here at the
kickout hole. Um,
you can I mean you can see what's going
on there. It just it always kicks the
ball out in the exact same spot.
So,
we've got to clean all this up, put the
new flippers and everything on it, new
rubbers and everything on it, and then
we'll go from there. We need to
troubleshoot this thing a little bit and
start working through it and repairing
some things. Um, but this is what we're
starting with. So, I'll get Joey to come
in and clean it up for us. And uh we'll
see how it looks after it gets a nice
little bath. That may be dirt from the
Netherlands on it. You think they
brought it back over when they
reimpported it the from the what you Oh,
that's crazy talk, right? It's probably
American dirt.
[Music]
Hey,
hey, hey.
[Music]
Hey,
hey, hey, hey,
hey, hey.
Hey,
hey, hey.
Hey,
hey,
hey.
[Music]
Hey,
hey, hey.
[Music]
All right, folks. This is what Joe ended
up with. the
like I said it's just worn. It's kind of
evenly worn. Um this isn't neglect or I
guess you could say that oh if they
would have waxed it better it wouldn't
have worn as much but this is just
because this thing has been played a lot
which is you know you see that a lot
with games that are reimpports. They you
know made a lot of money.
So, it's it's not that
someone screwed it up or something. It's
just they've played it a lot and so the
paint is starting to fell on it. All
right. So, we're going to see if we can
make it looks a little better. I don't
know that I can do much with the white.
The white is hard to get right. It just
doesn't look right whenever you replace
it.
And since there's whole areas that are
worn pretty badly, like right there, we
might have to leave that. But we should
be able to do something about this down
here. So the first thing I'm going to
do, I think on this one, we're going to
explore our smear technique.
So, whenever you've got an area like
this where most of the paint's there,
but it's got all of this missing area,
what you can do is you can use a paint
that's this hopefully the same exact
color or slightly darker color and just
uh paint it on the whole area and then
rub it off. And what it'll do is it will
smear it off. What it'll do is it will
leave the paint in the holes
and take it off the top. So, you end up
with paint only in this area. and it
kind of blends together and looks pretty
decent. Or that's the plan at least.
I'll show you what I mean. I don't know
that it can it'll show up. But
where the paint is missing, it's
actually a lower.
It's actually lower a lower level than
the paint. You know, the paint has a
thickness to it. So, the paint that's
still there is higher than the paint
that's missing. So, that's what we're
going to try. So, I'm going to grab some
red um hobby paint.
hopefully get something similar to that
color. Now, it is pretty faded right
there, but we'll see. And uh we'll see
if we can just do just that area to
blend it in a little bit. And then up
there as well. And you know, I'm not
going to repaint the whole playfield,
but hopefully we can make this look a
little more presentable.
All right. So, I've got a red out of the
bottle that's pretty close. True red.
And so,
I'm doing exactly like I said. that I
just painted on and then I'm kind of
wiping the over
uh paint off with my hand.
So, it's wet and you just kind of rub it
to get the extra off and it kind of
blends in. Looks pretty good.
So, it's not perfect. You can tell it's
worn. So, I'll zoom in so you can see
that. Like if you if I just showed you
this, you'd be like, "Wow, he repainted
the whole thing." It's not like that.
If you get closer, you can see that it's
still how it was.
It's just basically got red smeared over
it now.
And it plays a trick on your eye and you
just you don't even notice that it's
been done. So if you if you paint it
hard with hard lines, you see, okay,
this stopped there and all this. But if
you kind of just feather it in and then
rub it while it's still wet and
everything, um you end up with something
like that. It doesn't work on
everything. It only works whenever you
have areas that are like this where
where it's just worn down and there's
holes in it, but most of the base paint
is still there.
So, uh I'm going to clean up the red a
little bit, but it's kind of done. Um
and then maybe we'll see if we've got a
blue. Well, we can do the same thing
with the blue here and up there.
And I need a little bit for the
the eagle or the bird or whatever that
is. Is that a I mean I guess it's an
eagle because it's a freedom theme, but
it almost looks like a Thunderbird or
something. Okay. More.
Okay. So, I'll show you how I'm doing
it. So, I've got a blue here. This is
actually not perfect. It's ultra blue
deep.
And it's a little bit more purple than
the other blues on the playfield, but
it's the closest one I had. So, you just
whenever you're doing this, you don't
have to get it perfect. You just want to
get it close.
And if you have to go one way or the
other, make it darker. If you make it
too light, it'll stick it'll stick out
where you can just it's obvious that
it's too light.
So, this paint is pretty runny.
So, we're just painting it in. Kind of
getting most of it on there.
Not too worried about
getting it perfect because we're not
actually going to leave it all on there.
We're just trying to get over all of the
the areas that are faded.
It kind of reminds me of those
commercials back in the day with that uh
what was that stuff you put on your car
that like rejuvenated the paint. What
was that crap called?
It was like a polish you put on it. It
brought the color of the paint back.
All right. So, while it's still pretty
wet,
I'm just going to take a paper towel
since it's a large area. And also, I'm
trying to keep it off of the white as
best I can.
And so, I'm removing a lot of the paint
back off. So, we're getting that that
top coat very thin.
Okay. And we're just going to leave it
like that. Bam. Done.
Work perfect, right? All right. So, I'm
going to very carefully clean up where I
got a little bit of it on the white
area.
Okay. So, easy peasy. I couldn't get the
blue completely cleaned off of the white
because you got the same issue. You've
got um a part there where it's lower.
So, I made it look as good as I could.
Uh and I touched up up there a little
bit around there.
where it was really worn.
And we're going to leave it at that. Um,
I'm going to go ahead and put in the
black lines.
Whenever you do that, use acrylic
waterbased
paint markers. Works great.
You don't want to use something that's
not water-based because then you can't
clean it up even worse than this. And,
uh, whenever you spray clear over it,
it's going to interact with that badly
sometimes. So you'll end up where it
runs or something and you end up with
black ink all over the playfield.
So, uh, yeah, acrylic, acrylic, acrylic.
So, I'm going to I'm going to draw in
some of these black lines that have
faded away, which should clean it all
up, make it look a lot better, make it
look less worn, and kind of bring it all
together. I also need to still mix a
little bit of the the u that aqua color
or whatever we're going to call that up
there at the top, the turquoise. Um, but
I'm going to put black lines in here.
And I'm gonna put black lines in in the
middle around those arrows,
which should really bring it all
together and make it look a lot better.
Okay, so this is what we came up with. I
didn't do the white. I just don't have
the ability to match that properly on a
huge scale like this. Um there's no way
to for me to do it where it wouldn't be
obvious.
So, we redid the red down here and the
blue with the smear technique. We
reinked all of the um inserts to get all
the circles back where they need to go.
I reinked the inserts on the arrows, but
then the paint was worn, too. The wear
was just so bad that it it wasn't
contained to just the black area. It
went into the turquoise, I guess we'll
call it, areas, too. Um so, I had to
color match that. I had I didn't have
anything for that right out of the
bottle. So, I just mixed I took
something that was close and I mixed
some blues and some greens until it got
closer. So, I think it looks pretty
good. You can you can tell though if you
look close enough, you can see where
it's touched up. But, I think it came
out pretty good. Um over here, I did the
smear on the turquoise there. You can
tell if you look close because it wasn't
a perfect match, but I think it looks
better than it did. And like I said, I
went a little bit. It ended up being a
little bit too dark, which is better
than being a little bit too light. If
it's a little bit too dark, it just
looks like wear. It's like the white up
here that's worn away, but the wood
underneath it is darker than the white.
So, it just looks like it's worn and it
doesn't as long as it looks clean in my
opinion. It just looks better like that.
If I were to paint that white, the
problem would be that it would stand
out. You could tell that you obviously
repainted it and it just it looks trashy
in my opinion. I think this looks much
better just leaving it how it is than uh
getting a bad color match on it. Um
similar here um which goes through this
spinner shot here. Um you know, you're
going to have all the plastics hanging
on here and everything. It's going to
look good once everything's back on it.
Uh I ink the two inserts and I touched
up the blue and the aqua just a little
bit or turquoise just a little bit. Over
here, I inked the inserts. And then up
here, you saw what we did with the uh
where the ball had been kicking out and
wore through the paint. Um the red's a
pretty good match. And then the
turquoise colors were the same, of
course, as the ones down here. So, I
touched that up. It's in a great spot.
It's way up at the top of the playfield.
So, you're not even going to you'll know
because I just pointed it out to you.
But, if you uh if you weren't aware that
it had been done, you'd never see that.
I also cleared all of the pretty much
all of it with spray paint. And the the
point of that is you've already got a
heavily worn playfield. It's just going
to keep wearing if you don't do that.
There were also areas like here in this
area where it was thin where the paint
if you just messed with it, it was
starting to flake off. So just rubbing
wax on it would have made it worse and
worse and worse. Joey cleaned it up the
best he could, but it was just
deteriorating. So, personally, yeah, it
has wear on it, but I think
I would say it's going to end up being
like an eight, unless you just think
that the wear there completely
um disqualifies it from being decent.
You know what I mean? So, in my opinion,
I think it's going to be like an eight
out of a 10 once we get all the plastic
back on it. And I think it certainly
looks a heck of a lot better than when
we started.
Well, I guess we'll have to get Joey to
wax it. Hey, Joe, get play the Marvin
Gay music.
[Music]
Wow.
[Music]
Wow.
Wow.
[Music]
Wow.
[Music]
Wow.
[Music]
Yeah. Yeah.
[Music]
Heat.
[Music]
Heat.
[Music]
Oh yeah.
[Music]
Wow.
Oh yeah.
[Music]
Oh yeah. Yeah.
[Music]
Yeah.
[Music]
Yeah.
[Music]
Yeah. Yeah.
[Music]
Hey,
[Music]
hey, hey.
[Music]
Hey, hey, hey.
[Music]
Hey,
[Music]
hey, hey.
[Music]
Hey, hey, hey, hey, hey, hey, hey, hey,
hey, hey,
[Music]
hey.
[Music]
Heat. Heat.
[Music]
Heat. Heat.
Heat. Heat.
Okay, folks. This is how it ended up
looking after the rubber rings and the
paint and the wax and everything. I
think the bird looks pretty good. What
do you think about that?
Uh, but you can see if you look close
enough that it has been touched up.
But I think, you know, it just kind of
makes it look vintage. That's the word
we're looking for, right? Vintage.
Okay. So, next up,
I need to work on these flippers a
little bit. Um, this one's cracked
and this one's filthy. So, we got to put
a new ring on there, but it's got all of
the old ring on there. So, I might be
able to clean that on the playfield.
This one though, we're going to have to
remove because we got to replace that
that uh shoe on it.
There we go. That's just what it needed.
Check out the cool blue flipper rings.
Some of you are going to be so triggered
by that.
I think it looks pretty cool. I'm not
really a big fan of mods, but if the
customer wants them, you know, I'll do
them.
But I think they look great. We did a
previous uh Freedom and it had those
blue rubber rings on it. So, he wanted
us to track them down for him. And we
did. We actually got them from Titan
uh pinball. Maybe I showed them at the
beginning of this video. I can't
remember. But yeah, Titan pinball
rubbers. They're pretty nice. I think
they're supposed to be more durable,
too, where you can clean them and they
last longer because they're made of a
different material. They're not actually
rubber. They're something else. Um, they
do they probably play slightly different
though, I would imagine.
But with the red, white, and blue theme,
you know, it's kind of nice. I mean,
white would have looked good, too. But,
um,
yeah, it's it's cool.
Makes it a little different than most of
them you see. And it's one of those
mods, folks, that you know what? If you
don't like it, you just throw them in
the trash. Like I do with leads.
Whenever people put fake light bulbs in
their leads, I have to take those out,
throw them in the trash. So,
um, so yeah. So, that's pretty good.
Okay, so the other thing that I want to
do is I want to take this back glass out
and clear it, the back of it. Um, it's
kind of dirty. I can't really clean it
because if I do, it's going to make the
paint flake off. But some of this paint
is disappearing. So, you can see
the little flakes and stuff. It's going
to get worse if we just leave it. So,
we've got to clear it. Um, so whatever I
do, you're going to see on the back, and
we looked at it in the first video,
you're going to see on the back that the
thing is dirty on the back. It has some
stains and stuff on it. But, you got to
be smart about this. If we clean that,
if we try to clean that off, it's going
to take off more paint. So, it's going
to make it look worse than it does right
now. So, that we can clean the back that
nobody can see. And you cannot tell that
the back is dirty right now by looking
at the front. So the staining and things
that you'll see on the back after we
paint it, yeah, we could clean it off,
but it's going to damage the paint and
it's not a detriment to the image right
now. You can't even tell that there's
dirt on the back of that back glass. So,
we're going to leave that dirt on the
back of the back glass and it's going to
be on there permanently.
But guess what? The paint is also going
to be on there permanently so it doesn't
keep flaking off. So, I think that's
best for the machine and I think the
customer will be happy with that.
Obviously, they want it to look as good
as possible. If I could see like some
staining from the dirt on the front of
the glass, I would try to do something
about it, but you just you can't, you
know. So, I've been thinking about it
for a few days. There's just nothing we
can do about it. So, we're going to lock
that stuff in so that it doesn't keep
getting worse. So, I'll pull it out. We
we spray it with Triple Thick. I am
going to very carefully clean the
windows on the back because it's not
flaking in those spots. That'll get that
as clear as possible. And then we're
just going to clear coat the whole back
with triple thick uh to make it where it
has the best chance possible of holding
up for another
how long has it been? 50 years. 49
years. Okay. So, I'll pop that out and
we'll do that since we're doing the
cosmetic stuff right now. Why not do
that next?
Okay. So, here is the back glass and you
can see the staining that I'm talking
about.
It's where probably somebody set a beer
on top of the machine years ago and it
stained down behind the glass. Over here
on the actual part that illuminates,
you've got some just dirt and even
cobwebs and things. And you get this
whole
It's almost like a mold that I've seen.
See the brown there? like the brown
spots
that will clean up, but not on the back
of the back glass. If the back glass is
compromised, so if you let the light hit
where I painted it, you can see the
issue.
So, everywhere you're seeing a bump is a
little piece of paint that was about to
flake off. And you can see that it's
just all over everything. So, right
there where all that is, see the back of
his neck there? that, you know,
certainly would have flaked off. All
this would have flaked off. So, you you
just you don't have as many options.
And again, from the front, you can't
even tell that there's that little bit
of dirt on it. I think a lot of times
people try to make things perfect
because they're thinking, "Oh, I want it
to be super nice." But they don't
realize that the damage has already been
done, you know, like I didn't put that
dirt on there, you know? that happened a
long long time ago. Um,
so it's going to be just fine. It's
pretty presentable the way it is, but it
won't be if it gets much worse, you
know. So, um, I think it looks good the
way it is, and now that we've sprayed it
with Triple Thick, we've locked that in.
Now, if you don't know about Triple
Thick, I'll show you a can of it. You
can see in our
store room here.
get you some of this 0500. That's the
the
um part number. Triple thick crystal
clear glaze. And you just paint the back
of the back glass. Now, don't do it on a
if you've got a back glass that's in
nice shape. Don't do this.
Um think about it. If the back glass has
lasted 50 years without this,
you're fine. So, how do you get a back
glass to to last 50 years without this?
you keep it in a temperature controlled
environment. And I know everybody wants
to blame it on the uh uh the
incandescent lamps. It's complete
nonsense. It doesn't have anything to do
with that. It has to do with how the
thing was stored. You know, find me find
me a pinball machine that's three years
old that has incandescent lamps in it
that has bad paint on the back glass. It
doesn't work like that. On the transl
lights, it does. I will I will agree
with that. Um, but uh people like to
blame it on the incandescent lamps.
That's nonsense. It's because of the way
the things were stored. You put them in
a shed, they've been in a shed for 15
years. They were in a storage building
and the operator moved out and stopped
paying the heating bill for 20 years.
Yeah. The electric bill for 20 years.
That's what causes stuff like that in my
opinion. But who the hell am I? How
would I know? I've only fixed, you know,
tons and tons of them. What? What do I
know? I'm sure that you with your one
machine that you know read about it
online, how the LEDs make it pop. I'm
sure you know all about it. So, you can
go with your own judgment if you like.
I'm just telling you, if you've got it
in nice shape. See, that's another
point. Let me make another point.
If the incandescent lamps are making the
paint flake, then how do we have any how
do we have any back glasses that the
paint hasn't flaked on?
Checkmate. Checkmate. Emmerers. Check of
the mate.
Checkmate.
All of the All. Think about this. Now,
let's get logical.
If the if the pinball machines shipped
with incandescent bulbs, and they did,
okay? If the incandescent bulbs were the
problem, all of those would have flaked
paint. But they don't. Some of them are
fine. Some of them are screwed up.
What's the difference?
The difference is some of them weren't
stored properly. So anyway, that's my
whole point. Maybe this one got screwed
up on the boat
um over in back. Who knows? But all that
to say, if you've got one that's still
in really nice shape, don't put this on
it because we don't know long term what
this does. It might be this stuff turns
purple after 30 years. Who knows, right?
So if you got a nice one and it's lasted
50 years, just leave it alone. be take
care of it. Keep it in a temperature
controlled environment. Put your leads
in it if that's what you're hellbent on
doing. And um I wouldn't use it, but if
you've got one that's damaged like this,
this is the best thing to use on it.
Now, you will find sometimes
um old back glasses that operators had
uh that they fixed with masking tape,
like not masking tape, u packaging tape,
packing tape,
and the stuff yellowed over the years.
So, it'll have like yellow tape on the
back.
But, um anyway, so that's my whole
point.
And I'll show you this. I haven't showed
it in a while. This is our website,
lionsarcade.com.
Lions like uh not like the the animal
like the name l yo ns
like Leon France right
lionsarcade.com
and if you go up here to the top it says
home that's this page and then another
one says games available so if you click
that
here are our games available and there
are more than one page
right and then there is a parts page
page as well. So, if you click the parts
page,
look at what we have here. Now, now I
want to read this to you. The following
are links to Amazon of products we use
on our repairs. If you purchase any of
these items, it may pay us an associates
fee. Thank you. So, this is just a link
to stuff on Amazon that we use on
things, right? So, here's like our uh
synthetic lube, super lube that we use
on the the stepper units. Here's the
3in-1 oil, but this is the 20 weightight
3in-1 oil. That's, you know, a little
better for jukebox mechanisms and stuff.
Here's the wax that we use on the
playfield. Everybody asks about the
clear coat. This is the actual clear
coat that we use. This is the triple
thick I was just talking about. Let's
see if the link is broke. Look, I've got
written down at the bottom where the
stuff's made to. Made in USA. Made in
USA. Made in USA. I've went out of my
way trying to find that, but some of
them
are made in China, you know. So, it just
depends on what it is. Made this one's
made in Mexico.
So, let's see if my link's still good.
Now, if you come to this page and all
these are broken, it's because your ad
blocker has broken it, which is fine. I
don't blame you for having an ad
blocker, but if you I don't know, you
might be able to mark our site as safe
or you might still be able to click the
link or something. I don't know. But
anyway, if you click the link, let's see
if this is still a good link. I haven't
checked in a while.
Tada.
It's $647
and it's a miracle paint.
It's a freaking miracle paint.
All right. So, uh, yeah. So, that's
that. Check out this, you know, the
parts page on our website if you ever
get a chance or if you're interested in
that. And if you're not, I understand.
Um, we just got a bunch of different
stuff on there that we use on our stuff.
I need to put some more on there,
actually. But this is our best stuff.
All right, back to the machine. All
right, folks. I've went through and
replaced all the light bulbs except for
the blinkers. Um, it's a little over the
top, a little overkill, but that's how
the customer had it, so I'm going to
leave it how he's got it. Um,
those are pretty cool. Those are 455
blinking bulbs, and they just come on,
and then once they overheat, they turn
off. They come on, and then they
overheat, and they turn off. They come
on, and they overheat, and they turn
off. And by the way, the leads can't do
that.
Okay, back to the uh back to the uh back
glass.
B.
I love it. All right, folks. I think
that's it for this one.
We will uh continue next time where
we'll finally get into some electronic
stuff. The thing is working. It just
ain't working quite right. So, we'll get
into that next time. I hope you enjoyed
it. We'll see you on the next video.
Now, if you like these
themes from 1976, you may not realize
this, but this was not the only pinball
machine uh with this basically
centennial theme. that they made in 76.
They all made one. Bal made one,
Williams made one, and Gotib made one or
two. So, we'll put one up here. We'll
see you on the next video. Hope you
enjoyed it.