Attempting To Repair A Baldwin Special Trumpet From The 60's

Amateur Repair Time
257 followers
622 Video Views·Sep 7, 2025
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to
Amateur Repair Time.
We're going to do a weird one today. I
haven't worked on one of these before,
but I have a trumpet here that I picked
up at the flea market. When I was a kid,
I was in the band and I played clarinet
of all things. In the fifth grade, sixth
grade, seventh grade, eighth grade,
ninth grade, and then in the 10th grade,
you had to show up a month before school
started to be part of the marching band.
and I said, "Nah, I don't think I want
to do that." So, I dropped out, but I
played in the band for a little bit. So,
anyway, I was at the flea market last
weekend looking for uh like guitar stuff
and there wasn't any. But, there's this
one guy up there. He always gets all
kinds of cool stuff and um he had this
trumpet sitting there and it was beat up
a little bit and the guy's a really
honest guy. And uh I walked up and I was
like, "So, man, how much you want on
your trumpet?" It's just an old trumpet,
you know. And uh he's like uh and he
starts looking at it and he's this
thing's messed up. You'll see here in a
minute. He starts pulling off the parts
that are messed up and he's not saying
anything. He's just making sure I see
it. And he goes, "Uh"
he's like, "Do you play trumpet?" And I
was like I said, "Um, no, but uh I might
if you make me a really good deal, I'll
buy it." And he said, "Uh,
how about $15?" I said, "Okay, I'll pay
$15 for it." So, we bought a busted
trumpet for $15. And then he said, "You
know, that case is pretty nice. The case
might be worth $15." And I agreed with
him. I think the case might be worth
$15.
So, here's what's left of this trumpet.
I don't know much about them. Like I
said, I played clarinet. Um,
that's bent, though. I don't think it's
supposed to be like that. I think it's
supposed to be perfectly straight. So,
the end of it is just bent.
Um,
it's got some dents and things, but h
it's not bad. Let's see. It is a
Baldwin, which I guess a lot of them
were. That's probably just your typical
band trumpet.
Um, but the the main problem is
the slide or the the mouth pipe. They
have broke off. We have it, but it's
broke off. It's not supposed to be like
that, folks. So,
we need to try to solder that back on.
Now, how did that break off? It's
because the mouthpiece apparently is
stuck.
So,
from what I understand,
you know, basically you're getting spit
and everything inside of these. And so,
what happens is
they sit a while and they start to
corrode and then things will get stuck
together like the slides.
and the, you know, maybe the mouthpiece.
So, somebody has been wrenching on this
thing with a pair of pliers. You can see
the,
you know, where they've been
grinding on it trying to get this thing
back apart and were unable to and then
eventually
uh broke it clean off the trumpet. So,
there are the there are two little
braces that are soldered on one here,
and there's supposed to be one here, and
it's missing.
Well, it broke, I guess. So, it would
have went from here
over to there. So it goes about like
something like
that. And so the brace would have went
from here over to there.
So we're missing that.
Um the horn is bent down pretty
severely. We can bend that back.
Probably. This is all brass, so it's
it's all soft, but the the valves seem
all right. Now, it's sticking a little
bit, but then, you know, once you clean
it, it'll be all right. Um, and the
we've got one, two, three,
four.
Um,
I don't even know what those are called,
but whatever those are. Got four of the
slides, maybe. We got four of those. And
we're missing that little brace. So, I
need to figure out what I can do about
that.
I mean, there's there's obviously
options. You can um I could make that
work with anything. I mean, you could
use a zip tie or something if you needed
to, but it would be nice to have
something like that. I got to tell you,
too, it kind of looks like it's like a a
a fork or something almost like you
could take something and grind it down
and make it work. But I think what I'm
going to try to do is maybe see if
somebody sells those online. I would
think that somebody might sell
replacement parts. Um because it's
probably kind of common to break those.
You know, if a kid's got it in a band or
something, he drops it on the ground,
it's going to break one of them. You
know, the bell on it though is in pretty
good shape. It's not all
It's not all dented up and everything.
So, everything looks pretty good. Pretty
happy about that. Um, so it's really
it's not in that bad a shape. So, I'm
going to look at it real close and see
if I can figure out when it was made and
just look it up and just see if I can
get a little information about it.
Here's the case. It's in okay shape.
I don't know if there's anything that
needs to be done to that. Maybe the glue
just came loose on it. Um,
you know, I don't know. Just looking at
the case, I would guess this is from the
60s.
But I would think maybe this from the
1960s. Might be a little older than
that, but probably the 60s. But the case
itself is still in pretty good shape.
All right. So, I'm going to see if I can
find any kind of identifying marks on
it. And then we'll look it up and see if
there's any way to even tell what it is
or um I've seen them before, too. I
think the the pipes here can create
different types of horns, maybe. Um, so
I don't know if this is just a standard
trumpet or if it's a alto trumpet or or
what the deal is. So I'm going to try to
figure that out. All right. So I slid
the first slide. I'm calling it a slide.
It might not be called that. If I figure
out what it's called, I'll tell you
later. Um, I slid the first slide out
here. Now I think I might have this
wrong, but I think if I remember
correctly, if you leave like you can
tune the thing by sliding this in and
out just a little bit almost like a
trombone. It works the same way
principle I think if I remember
correctly. Um, but this one has one
I'll call it an insert in it and then
you've got this ring and up here the
ring is missing and the insert's
missing. So I think it's stuck inside
this
mouth tube. So I think that's the
insert. I mean the ring. And I think
it's supposed to slide out right there.
And there is a pipe. I think stuck in
there about that far. How in the world
I'm going to get that out, I have no
clue. I might be able to
solder that back to the pipe like to
here,
which would give me the ability to
wrench on it a little bit to pull it
out. I might have to heat it up or
something. And then I don't know what
I'm going to do about this yet. But I'm
going to fix I'm going to get this off
before we put this back on the horn cuz
we'll just end up breaking it again. But
this mouthpiece I don't think goes all
the way down to there. I think it just
they may even have it most of the way
out. I don't know. But something's going
on here. But I'm going to try putting
like um
um
I'm going to try putting like PB Blaster
and stuff on it. It seems like it's
Yeah, you'll have to tell me what you
think.
We
ever going to get that loose?
It may have corroded to the point where
there's no way you're getting it loose.
Well, I mean, worst case scenario, we
can just get another I mean, you can you
might be able to buy that on eBay off of
a parts horn or something. Um, but let
me keep looking at it. Okay, now the
hammer. Look, folks. I didn't beat on
the thing with the hammer. Okay, I have
a hammer here. I did use the hammer, but
I didn't beat on. So, you know, like for
to twist these off, you know? So, like
they're stuck a little bit. So, you put
like a little little rag on there and
you do this.
Nothing major. It wasn't major. Okay.
Don't don't worry about it.
It was 15 bucks. Okay. It was And it was
my 15 bucks. All right. So, now I didn't
hit this with the hammer, but I was
trying to pull this thing like this, and
when I did, it popped off the uh
the solder came off of this little
ball. I don't even know why those are
there.
We'll have to figure that out.
one slide,
two slides,
three slides, and then four slides with
the piece still stuck in the
mouth tube. Okay. And I was able to get
the
the U valves apart. We may be able to
tell how old it is just by looking at
these. Let's see.
See, that's plastic. So, but you know
what? They could have replaced them at
some time, too.
So, that's plastic.
And like I said, they all seem to be
working pretty good. They were That one
was sticking a little bit. That spring
in there looks pretty good.
It has little pearl buttons.
Um, and then the little felt
Now, it could be
that they had the thing serviced at some
point, but let me tell you a little
secret about band instruments. Most
people don't ever get them serviced cuz
what happens is your kid takes band for
3 years and then never touches the thing
again. Kind of like my clarinet. But
these little felt pads you need to
replace every once in a while. There's
also cork in some things. I don't know
about in these. I don't see any. Unless
I'm I'm not looking at cork right now, I
don't believe. Um, you got to replace
the cork sometimes. Oh, it's on the
right.
This is the the spit thing. You do this
so all your spit drains out of it. Look,
folks, you knew it was a trumpet video
before you clicked on it.
All right. So, um,
yeah, I want to try to see how old it
is. And there is a serial number on it.
It says 403312.
So, I'm going to just see if there's any
kind of database of Baldwin serial
numbers that'll help us out on that. I
don't think that's any kind of date
code. Um, because I can't make Haidider
nor hair of it. There's no way it's from
1940. I don't think it's anywhere near
that old, but um
yeah. So, we'll see. It's a Baldwin
special, it says. All right. So, here's
a little info. This is from
brasshistory.net.
Baldwin Band in instruments, Elcart,
Indiana. In the late 1960s, the Baldwin
Piano Company decided to add band
instruments to their offerings. Their
1969 catalog. Now, they're not showing
us their first one. They're saying that
they started in the late 1960s.
There's 1969 catalog, for instance,
shows three lines of brass. The student
level special, which is what we got. The
intermediate level custom, and the
professional level baldwin. Brass
offered were coronets, trumpets,
trombones, French horns, baritones, and
a susophone. These appeared to be
stencils made by Blessing in Elkcart.
So, Blessing was a
a manufacturer of brass instruments.
I don't know what the stencils means.
Maybe that means that uh
you just put whatever name you want on
it. I don't know. The Baldwin TU43
trumpet in the 1969 catalog looks very
much like the Blessing Masterpiece model
from the same year.
According to the 1969 catalog, these
were distributed through the Fred Gretch
company located in New York, Chicago,
and Elmherst, Illinois. It's likely that
this was a short-lived venture as all
the examples found appear the be the
same design and have a limited serial
number sequence.
H that's interesting.
Um
perhaps the fact that at this time
several large US band instrument makers
started having Yamaha make their student
models contributed to the end for
Baldwin. The serial numbers for coronets
should start with 30, which relates to
their model numbers, followed by a
fourdigit production sequence number.
Trumpets all start with 40. Yeah, ours
is 40 43312.
Um,
so 3312 in the late 60s. Yeah, it must
just be the order that they were made.
And it's probably not the serial number
of Well, I don't know. Maybe maybe they
only made a few thousand of them. Who
knows? Um, they don't say it's sixdigit.
Let me see if I can find some pictures
of us of a similar one. I mean, they're
showing one right there. And see if I
can find some um
some uh different serial numbers on some
of the ones online. Okay, so this is a
Baldwin custom.
You know, they're acting like they only
made these a few years and then
basically got outdone by other people.
Yamaha in particular. It's a Baldwin
Custom, which is the higherend one. And
um one thing I noticed right away is
we're missing this finger piece here
to help hold it. And the custom
apparently has some like some floral
work on the bell.
And it just looks a lot nicer.
That's a nice looking horn. Uh, and um,
so you know there's one in very nice
shape and you can see that the bottom
piping is parallel with the top one,
which seems obvious, but
ours is off a little bit. Um, so I'm
going to have to try to bend it back
that direction.
And then there is the case
that it went in. To me though, something
looks a little off. I mean, that's an
awful big case.
Like, why are we why do we have all this
extra room here?
But it does say Baldwin on it.
Okay, so here's a Baldwin special. So,
this is just like ours.
Um, same model basically, I believe.
Unless there's something I don't realize
about them. Different type of case than
ours. Ours is probably in the wrong case
because this one looks more like the
other Baldwin case,
but it doesn't have the little thing
that I was talking about on the custom,
the little loop that you put your pinky
in, I guess.
And there is the serial number. Theirs
appears to be 40, which stands for
trumpet. And then does that say 0302
maybe
in some parts? Theirs is worse than
ours,
but I'll bet that slide pulls out.
Yeah, some parts of ours are actually in
worse shape.
There's the four slides. And that
confirms that Yeah, that piece is
supposed to pull all the way out.
Yeah. And so there's the case. Very
similar to the the custom case that we
saw. It says No, that says Bundy.
Yep. So that's the wrong case.
Oh, and that's different. Ours is
written completely different. Ours is
written sideways on it. That one's
written long ways on it.
And there's the Z brace that we need.
All right. Here's a very nice one that
was on Reverb for $95. Um,
and it does. So, this is a special
again. And it but it does have the
little ring thing. I'm sure that's
pretty common on every trumpet. So, I
should be able to find one of those.
Yeah, this one's a very nice shape. And
it does the the mouthpiece is really
long on it. At least on this one.
We need this little I need this little
thing here.
I might just have to go to a music store
and pick some stuff up.
See the number right here? It says TU41.
I think ours, I thought said something
like that, but it's all ground up
because they've been messing with it
with the pliers.
Suckers.
Well, this one's beautiful.
Beautiful.
What a nice looking trumpet. I'm not a,
you know, I don't know anything about
trumpets, but
that one certainly looks good. What is
our serial number?
4 0122.
So that would be like number 122 if if
that's how they did it.
Yeah, there we go.
Yeah, see that one's written different
than ours, too. It's written sideways,
and ours is written um the other way,
and ours has a higher serial number. So,
these are probably earlier ones, but
ours maybe is from the late60s.
You know, all that matters is what does
it sound like? I guess probably most of
them sound about the same, you know,
unless you've got a really high-end one.
All these band ones probably sound about
the same. Yeah. See, that's a Yamaha
case with duct tape on it. So, that's
not the right case either. All right.
So, here's another one. It's got the
logo the way ours is, and the serial
number is 403881.
Ours is 403312,
I think. So, ours is 3312. Theirs is
38.881.
Um, so it would have probably been
closer to the time that ours was made
and they've changed the the the logo on
it or the name carving engraving on it.
All right. So, I found this uh Baldwin
trumpet and the case is the same. Ours
is a different color, but if you look at
this little metal piece on the end, how
it kind of stair steps down, it's
exactly the same as ours. So, that must
be the original case. That's pretty
cool.
Let me see if it shows any more of it.
The inside of this one's slightly
different.
Um, mine may have been modified or
theirs may have been modified or
you know,
it doesn't even matter, you know. I just
find this stuff interesting. All right,
folks. So, I put some PB Blaster on it
and was able to get this piece out. It's
just sitting in there right now. Like, I
need to solder that back. And,
you know, that came out of here. The
mouthpiece was stuck bigger than crap. I
mean,
it was stuck. And you can see that it's
pretty ate up because they were trying
to take it off with pliers. So, it
seemed almost as if they got it worse
with the pliers.
Um, eventually I was able to get it
loose though, but I had to basically
press it off. So, there is a lip here.
So, if you are holding something on the
edge of that lip,
you can press the the
this off, right? But it's pretty rough.
So, I think what I'm going to do is I'm
going to sand it. I'm going to just take
some sandpaper and clean it up. And I'm
going to boil it because it was, you
know, somebody's mouthpiece. But
everything else is pretty cool. So I'm
missing three parts. I'm missing the
brace
that goes here.
I'm missing and if you look,
there are on this particular one,
there are two sizes of brace.
So see how that one's real long and then
it curves. This one is shorter. So,
there's a shorter one, right?
Well, I guess it could be that they're
both the same size
on that end.
Yeah, it kind of is, isn't it?
So, it's kind of the part that goes to
the the um
what do we call this? The wind the the
mouth piece pipe.
What do we call it? The main pipe, the
fton pipe, the first pipe, whatever. Um,
it looks like both of them where they
touch it is a little short piece. And
then this little longer one, I don't
know if Oh, yeah. We can tell from here.
Uh,
yeah, it's shorter. So, that where it's
soldered is shorter than that where it's
soldered. the solder goes a little past
it.
I don't know how to give you a good
representation of that. I guess I could
measure it, but basically they're two
different sizes. I've noticed that by
looking at pictures online, right? Um,
so I need one of those. So I can put it
back here to hold that in.
[Music]
I need that. And then the other other
thing that I need is just minor. Um,
it's the little holder that goes here
and it slides in and can be moved. And
there's a set screw that goes in the
top. So, I need the screw. I need the
little pinky ring thing
like this, but it's complete. And I need
the little screw that holds it in. And
that's all that's missing from it
really. I wish Well, it's broke, so I
guess they couldn't have that when they
broke that one.
I wish they would have uh left the piece
in there, but you know, I wouldn't have
been able to solder that back. I'm going
to have to replace the whole thing, but
that's fine. So, I'm going to order
those parts online because um as we just
researched, this is a Baldwin, but it
seems to be made by a company named
Blessing.
So, if you get a blessing
uh uh
student horn, it's it's the same horn.
It just doesn't say bald one. It says
blessing on it. So, looking at it, I'm
not an expert on trumpets, but looking
at it, I don't see any difference. They
look identical. Um some of them the
coloring is slightly different. So the
way this has like
you know what I would call nickel and
brass.
Some of them are all nickel looking. So
you know you got that in different
places on them. But in general
everything else looks the same and these
little braces look the same. So there
are people on YouTube that part out
horns. They'll just take this whole
thing apart and just sell all the parts
off of it piece by piece. It's kind of
expensive, but in our case, it won't be
because all we need is that little um
support brace and we need that little
pinky thing and the little screw. So,
I'm thinking 30, 40 bucks at most,
right? How bad could it possibly be?
Okay, folks. So, some time has passed
and I was able to get my parts in. There
was a guy online named Texas Horn Trader
that basically it looks like is just
taking brass instruments apart and
selling the parts off of them. But
that's cool cuz I was able to get what I
needed.
Now,
I'm sure his trumpet was probably banged
up, beat up, tore all to crap. Nothing
like this beautiful piece of work we got
here. So, that one had to be sacrificed
to save this one. Okay. Sometimes on
these whenever people are parting them
out and I'm parting them back in, I
wonder if I'm just wasting my But I know
I'm not. I know I'm not just wasting my
time. Okay. So, uh this one uh this is
the what do we call it? The front piece.
Whatever. I was able to get the old
broken piece off.
I put a little more solder on it. I'm
using a soldering iron. You're not
really supposed to do it that way.
You're supposed to use a flame, but I
don't have one of those. So, we're going
to use a soldering iron.
Um, so this is the brace that was
broken. And I need a
By the way, it's from the exact same the
exact same horn. Um, but I need
something to hold it on there. They make
a little clamp for them. It's like a
spring clamp. I wonder if I could make a
spring clamp.
H
I might have something like that. But if
I don't um
I'll figure something out. I might be
able to put
if I very carefully lay it down. I might
be able to put like a weight over it and
then as the solder melts, it should lay
down in the solder and that'll be that.
I don't know. I'll figure it out. But um
I need to solder that on. I'm going to
make sure I got it fitted right to the
trumpet. You know, another thing I could
do is I could
solder the part on the trumpet first and
use something to hold it
and then once it's on there,
work backwards, you know.
I'll figure it out. We'll see what we
can get done. Okay, folks. So, it took a
little while. I had to mess with it a
little bit. And I I'm going to say right
up front, I am not perfect at this.
So
that's the original one. This thing was
bent all too crap. And this is my
solder joint with a soldering iron. Now
you remember that thing was bent, so I
couldn't quite get it perfect,
but I did get it
fairly level. Again, not exact, but you
know, it's it's kind of parallel.
And then this whole one I replaced. So I
put it on here.
about as good as I could get it with a
soldering iron.
And then I put it on there. That's
actually a decent
solder, but it's not completely flat
against the uh
the um horn. So it, you know, it needs
to be re-weed, but I don't really do
that. Like the I'm not a plumber, so I'm
not good at that. I put this little
thing back on. This was actually the
hardest one to put on because you
couldn't hold it.
Um, so I had to hold it with a pair of
needle-nose pliers.
I'm kind of afraid I'm gonna break it
off if I keep messing with it. It's I
think it's on there pretty good. But
anyway, this little thing pulls out. And
then I figured out that to play these, I
thought that you tuned it as in
this is A. And so you slide this out
until it's dead on A.
And this is D. And so you slide it out
until it's dead on D. No, that ain't how
you play. You move the thing while
you're playing it. That's why the little
ring thing is in there. So you have to
I don't know how many. So it's C I guess
just you know um
playing it plain. I've actually seen a
lot of them referred to as Bflat
trumpets. So I'm thinking maybe it just
plays B flat naturally. Or it could be
that trumpets are always a little more
flat than the rest of the band. I've
heard I remember when I was in band and
I was I wasn't I played a clarinet so I
was in the woodwwind section but I
remember them talking about how
you had to transpose the music to a
different key for certain instruments
and I don't know if the trumpet was one
of those. So it could be that instead of
playing a C this thing plays B flat all
the time but anyway so let but let's
just say it's C and then this you know
you know how many notes could you get
out of three keys? So you could get C,
D, E, F. And of course, I'm just
guessing this, right? G.
Wait, how did what did I just say? Yeah,
G,
A, B. I guess you could get all of them
with them, but I I don't think it works
like that. I think you I think on some
of them you have to hold a couple down
and slide that out and things like it.
And I think you have to slide this one
out, but there's no there's nothing on
it to do that with unless you're
supposed to use these. Maybe that
explains why those are there. You hit
them with your thumb or something. I
don't know. Maybe this is the old way of
doing it. And the new way has a little
ring or something. I don't know.
Obviously, I don't know how to play the
trumpet. Okay. So, I've cleaned it up a
little bit. It's not perfect, but I
think I've got it all back together. I
Well, soldered this back together. I
don't know if I showed you that.
It's not real tight, but it's a little
It's not as loose as it needs to be,
which I think I need to oil it better. I
need to get the proper oil. All I've got
is sewing machine oil.
Um,
so all of the all four slides move
properly, but just not well enough. Some
of them do, like this one removes really
well.
Um,
I think what I've got left for now is I
need to clean this up a little bit. So,
when I soldered it on, it burnt some of
the enamel a little bit. This thing
basically, you know, it's brass, but
it's clear coated basically. And where
they've been
ratcheting on it and stuff, it looks
pretty rough. So, I think what I'm going
to do,
I'm not going to be able to get rid of
all of these nicks. I don't want to go
crazy on it, but I'm going to take a
little bit of sandpaper and just clean
it up a little bit. Now, look at the
mouthpiece.
They were really wrenching on that
thing.
I mean, you get another one, but it's
just cosmetic. It's just a, you know,
it's a little pipe.
So, I'm going to clean this up too with
sandpaper a little bit. Um, you could
probably
I mean it's basically tarnished, but I
think sandpaper would be my best bet
considering how rough it is. And just
try to make it look a little better and
this look a little better. And then
we'll see if I can play it.
You can see it's pretty beat up, but it
cleaned up a little bit. And of course,
comes right out now. So, I'm going to go
a little bit more with the um sanding
like a a higher um grit to get it even
smoother
and then we'll see if the thing can
actually play. Of course, I cannot play
the trumpet, but I'm just if I can get a
couple notes out of it, I'll consider
that an accomplishment. It's actually,
you know, it cleaned up kind of nice.
I think we saved it at least. I don't
know if anybody who's any good could
play it very well, but um I've learned a
lot from it.
All right, I'm going to record a bunch
of this and maybe I can get one little
note coming out.
I think I can hear it echoing through
the neighborhood. Did you hear that?
neighbors going to love me.
It takes a lot of air.
You got to purse your lips just right,
too. All right, let me try this again.
[Music]
Can you hear it echoing? I don't I can't
tell what it's echoing off of, but
something is echoing. It's making
something vibrate or something. Maybe
it's the springs and all the clocks.
[Music]
[Music]
Well, hell, that didn't sound that bad.
[Music]
[Music]
So, you know, um, um, what's his name?
The the the the guy in the Tijana brass
band, Herb Alpert. Herb Alpert is
probably going to retire hopefully no
time soon. But down the road, Herb's
going to retire and he's going to need a
replacement. So, I need to start I need
to start practicing. So, let me try real
hard. Okay, here we go.
[Music]
[Laughter]
Let me try moving this front one out. I
remember it was supposed to make some
type of note.
[Music]
Huh? Good lord. I'm going to give myself
a headache. I'm sure none of you guys
will get a headache though watching
this.
[Music]
I can't phrase anything though. All I
can do is just blow like hell and push
the buttons.
[Music]
[Music]
[Music]
[Laughter]
Ah, yeah. That's worth every bit of $15.
All right. So, I'm going to practice
all night
for the next two years
or probably till about 2:00 a.m. when
the police show up. That'll be the end
of my trumpet career, maybe. But, um I
don't know. You know, I think the whole
problem could have been could have been
um
uh resisted if they would have just done
this.
Oh, wow.
The thing's kind of warm.
I wonder if that's from the sandpaper or
from me blowing hot air in it.
Pretty cool. All right, folks. There you
go. Um,
I'd call that I mean, is that repaired?
Did we repair it? I think we repaired
it.
I don't think it's a high-end
instrument, but I don't know that it
ever was. It's a band instrument, and it
works. All three of the valves work. I
was able to blow something that sounded
like an an E flat on it. Um, so yeah,
I don't think I can do anything with it.
I can't sell it to anybody or anything,
but I'll keep it with my other musical
instruments. I have lots of guitars,
bass, uh, electric keyboards. Um,
do I have anything else? Oh, I've got my
clarinet.
Um,
that's probably about it. I never was
good at the clarinet either. I mean, I
was all right. I could I could read the
sheet music and uh but it's a completely
different thing. You do need a lot of
wind to blow the clarinet and you know,
I'm so quiet and reserved. Maybe this
just isn't the instrument for me, you
know?
Now, I could get the muff, but what the
hell fun is that? You don't want to do
it. If you're going to play a trumpet,
it should be they it should be echoing
like it was and the neighbors should be
getting upset and uh that's the whole
point of it. All right, folks. So, there
you go. Hope you enjoyed it. This has
been amateur repair time. We'll see you
on the next video.
[Music]
touches.
Pass me the
tiny clock.
[Music]
Take it
[Music]
from
faded traces back.
Get it back to working by the end of the
show.
Bringing broken gadgets back to life.
Turning silence into stories one at a
time. We're fixing to fix easy.
I'm sure
for you and me.
[Music]
It's
time.
It's
time.
It's bad time.
[Music]
