Repairing A Cool 1960's Delmonico Nivico JVC Radio / Record Changer CONSOLE

Amateur Repair Time
257 followers
227 Video Views·Jul 20, 2025
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to
Amateur Repair Time.
Today we're going to work on this super
cool
photograph here, record player, record
changer, I think it's called. I don't
even know who made it. I don't even
remember where I got it, but I have
three of them. So, since I have three, I
don't need this one.
So, I've got one of these uh in my home
on display.
Um, and then I've got two other ones
that I picked up and I hate to say it. I
hate to say this kind of thing, but I
kind of upgraded. This might have been
the first one that I got and I thought,
"Oh, that's so cool." And then I got
another one and then I got another one.
And the the difference between the three
is that they're taller. Now, if you've
been longtime viewers of the channel,
you know that one of my biggest problems
is I have about 30 record players. I
don't even know how many I have. If you
watch the series that I did, that's
Kermit's record player there that I
fixed up. Um, it's an old 78 player. So,
that's one. That's one. I had one here
that we moved out. Um, we've got this
one. There's a calophone sitting there.
Um,
they're all over the place. There's one
in the next room. We did a review on
one. Um, the Stack Stone one. Um,
I've fixed a whole bunch of the little
plastic ones. This one's a little higher
grade than that, but I don't think it's
like a real um a real top end one. The
thing that gets me about these is that
they're so low to the ground. I don't
get that. I don't understand what's
going on. I'm 6'1, which isn't crazy
tall, but I'm tall, you know, and um
I just can't get anywhere on this thing.
I mean, I'm it's it's it's
just a little bit above my knee, but now
that I think about it, so is that one.
Maybe that was just how they did them
back then. I don't know. So, let's see.
So, that one's way down there. I haven't
fixed it yet. And this one's actually a
little higher now that I look. I guess
that was just the thing back then. I
don't know. Seems weird to me.
as tall people got it hard sometimes.
Not really. It looks It looks bigger
than it is, but here in person and it
has speakers built in, so that's cool.
Um, it's it's not 2 ft off the ground, I
don't think. Maybe.
You know, we could measure it,
but I'm not going to. Okay, so it is.
Are you ready? It's a little wobbly.
You know, it's got these little cheapo
legs on it. I remember when I was a kid,
I was born in 78. When I was a kid, this
wasn't considered high-end type of
furniture.
Stereoponic sound. Is that what it says?
The I think that originally was gold and
it's kind of worn away. And there's a
power light there. But yeah, this is
like that pressed wood stuff, you know?
I mean, it's nicer than what you can buy
now.
Well, maybe it isn't all pressed wood. I
don't
I mean, I bought it because it was cool.
I guess it's not all pressed wood. Some
of it is, but some of it isn't.
It's the next grade up, right?
So, it's a record changer because it can
play more than one record because it's
got that clamping arm there. I haven't
messed with a record changer in a long
time. Uh, and it says, let's see if it
tells us who makes it. Del Monica Nico.
Nikico. Nico. Del Monaco. Nikico.
Never heard of him.
I may have heard Shango mentioned Del
Monaco before, but I can't remember if
he was just joking around or if he was
saying it was good stuff.
I don't you know to me this looks all
right but
um
actually I don't see any pressed wood on
it actually. I don't know what unless
that's what all that is. I don't know.
It looks It looks better than the crap
I'm used to getting or seeing. I don't
get any of it that I'm used to seeing at
um you know that comes from IKEA and
stuff like that.
All right. All right. So, let me turn it
around and we can look at the label on
the back. Put a little light on it.
Yeah, it's actually I'm being a little
unfair to it. If this is made in Japan,
I take back everything I said. Um, the
top part of it nice. The bottom's
cardboard, but you know,
that's fine. That's kind of how they
were.
I mean, a lot of the little portable
radios I get were made that way. Yeah.
That's all plywood, isn't it?
Okay, so that's a little nicer than I
thought. Maybe I should keep No, I got
to get I got to get rid of some of this.
When connecting an external speaker to
the set, loosen screw of terminal one
and number two, which will remove the
link from terminal one and connect the
external speaker lug to terminal one and
number three.
Okay.
Uh See what this says. Caution.
Interlock plug on chassis
is provided as protection against an
electrical shock. Do not tamper with
interlock or attempt
to operate
receiver with back remove. Look how they
broke that word at OP.
I I mentioned that before and somebody
said that uh it's common practice to
break it where the uh syllables break.
Made in Japan. Okay, I take it all back.
I think Japanese stuff is pretty decent.
Model 246EA. A friend of mine, Dennis,
said that back in the day,
Japan was the Japanese stuff was the
stuff that that him and his people talk
trash about.
They would say like today we go, "Oh,
it's made in China." You know, in a
derivative way. Back then they would say
it about Japanese. Oh, cheap piece of
crap. Made in Japan. But he admits as
well as I do that now when you see made
in Japan, you go right on. It's the good
stuff here.
Cassette stereo phongraph model 246EA.
Frequency range AM
535 to605.
Intermediate frequency is 455. That's
typical. This thing's going to have them
tubers in it. Uh frequency output 1.5
watt and 1.5 watt. Power source 117
volt. Power consumption 45.
Is that 45.5 watts? Is that what they're
trying to say there? And then it looks
like there might be a serial number
stamped in there. 780 something or the
other. Yeah, there is. I can see it with
my naked eye. I think it's a 780
0300.
That would be my guess.
And here is the tube count.
Manufactured by Victor Company of Japan
Limited, Tokyo, Japan. All right. That's
why I was saving it cuz it's I must have
looked on that and said, "Hey, right."
Okay. So, 1 2 3 4 5. It's a seven tube
amp. So, that's not too bad, right? All
right. So, I'm going to try to get this
thing working. And since it was made in
Japan, I'm going to charge more money
for it when I sell it.
What do you think about that? So, I've
got a video game store where we sell
arcade games and pinball machines. and I
got plenty of room where I can just set
this over in the corner and put it on
Facebook for sale and then tell people
they can come check it out and then
somebody will come by and buy this. Um,
off the top of my head without looking
it up, I'm thinking I could probably
sell this for like a hundred bucks. I
was thinking 50 bucks. I was planning on
getting it working and selling it for 50
bucks, but this is a little nicer than I
thought. So, I might put a hundred on it
and then just see if it happens.
It's a new It's a new age, folks. Uh,
everything that was $50 is now $100,
just so you know.
Um, okay. So, what are we going to do
first? I guess we're going to take that
interlock board off and have a look at
that chassis and just see what it looks
like underneath there. I would think it
would be underneath the stereo over
there, but we'll see. All right, people.
We're in there like swimwear.
Look, don't get offended. It's a joke.
Uh, look, here's an extra screw. Well,
that'll never go back where it goes.
You know, I never thought, what if I
find a snake in one of these?
Wow, man. The Japanese think of
everything. Look at that.
Now, did some kind soul leave the
schematic in it? What do you think?
Please, Mr. Radio Repair Man, please
leave me a schematic in there.
You bastard. Okay. Um,
here's a
insert for a 45
for you uh, English people over here.
They came like that. We didn't have to
do that crap. I mean, they came with the
big hole, so I guess that's backwards.
That's for you American people.
H
I see wax that's dripped out of the
motor. I wonder if the motor burned up.
Hopefully not.
Hopefully that's just oil.
Ooh, it's stereo. Ooh, there's four
speakers. There's four damn speakers in
this thing.
This is a lot nicer than I thought it
was. And you know, it has that little
light up front, too. That's just high
class stuff there, folks. This is
topofthe line.
Not really, but you know, it's pretty
cool. All right. Yeah. So, there is the
amp, which I think maybe
maybe we're going to be able to pull up
out of the top.
I'd like to get it out, replace some
caps. check some tubes
and then test it. Um,
wait a minute.
It looks like there's no paper capped,
so it's a little newer, which is good.
Um, okay. Let me see if I can if I can
take the thing up out of the top. All
right. So, it has four screws on the
edges.
And I suppose the knobs come off.
We'll try the screws first.
Okay. So, that came right out. The knobs
did pull right off. Look, they have
little felt things still on the back of
them. I don't know that anyone's ever
manipulated it. Um, and then there was
this piece of cardboard underneath it.
I have no clue why.
So then there were a couple
screws
um
that basically it's like a a shock
mount.
And then down on the bottom there were
two screws with a similar shock mount.
And then this was on the back.
And the whole thing actually lowered and
slid out the back.
Um,
there was a plug here for all the
speakers.
These two plugs go to the phonograph.
Um, and then there is a power plug
that goes to the phonograph.
Oh, and there was a ground connected
over here on a spade. Oh, and the pilot
light thing. The onoff light
um just slid off a little bracket. Okay,
so this is the bottom of it. And
remember, it's tube. So, let's see what
we got. And I don't have the schematics.
Maybe I'll go try to find them after
this.
So, we've got a ceramic cap.
Look at these resistors.
H.
Well, that's not in ohms. That's in
pico farids. So, I guess that's a cap.
Never seen a cap like that.
appears to be all original.
Two 500K pots for the volume.
And let's just say it has an eclectic
mix of capacitors. These are resistors,
but um
it's got everything. So, it's got
ceramic
and then if that is a cap, I don't know
what that is. I guess that's the
oscillator.
Uh, it has a paper cap in it
and it has electrolytic caps in it.
Pretty wild. There's another one.
I think it's all original, though. I
don't think anything's been swapped.
I hate when they put them on here
turned around where you can't read it.
So that's a 473.
Very cool. All right, let's look at the
top. I want to see what the filter caps
look like
if we weren't just looking at one.
Okay, so you can see the kind of generic
nature of the
of the chassis. I guess this thing was
just designed where they could put
several designs in it, you know, because
there's spaces for more tubes.
This is an AM only. You got to imagine
they probably had a AMFM version. We got
one tube that's a little crooked.
Well, that probably fixed the set. I
hope these aren't the ones. These aren't
the ones, are they? that have the silver
micica disease that Shango is fighting
so hard to uh get rid of. Look at this
little asbestous for you. Let's not
touch that. I'll try not to disturb it.
So, it's a 60 and a 60.
It tells you the surge is 250. That's
pretty cool. How many leads have we got
here? I have to touch mine as best as
let me see if I can tell. So, there's
three 60s. Um,
yeah, that's probably going to get left.
Matter of fact, we might Well,
those aren't likely to short, but the
other ones might. So, I'm probably going
to replace the other ones. I don't have
anything. I don't have 60. I've got 47
and I've got a 100. I could just go up
to a hundred, but
if I'm doing that, I might as well just
leave in what's in there as long as we
don't have a bunch of problems. We'll
see. Um, and then, you know, the tubes
are the tubes. Who knows?
Uh, I guess you might want to know what
tubes they are.
All right,
since I might not have the schematics,
it's a Hitachi 12BA6
tube numero uno.
You know, they needed receded. Anyways,
this is yet another Hitachi
12 AV6.
What happened to my seven tubes? I see
five tubes. This looks suspiciously like
a five tube set
when the schematics claimed it was a
seven tube set.
Oh. Oh, I spoke too soon. There's a
there's a there's a tube hiding back
here. So, we are now up to six tubes.
Whoop. My bad.
It's a Hitachi Hitachi
12be.
I'm just telling you these. I am not
remembering them. So,
come on.
You know, when you can't see what you're
doing, it makes it hard to do what
you're doing.
Has anybody else had that problem?
Get in there. It's your home.
I cannot see.
You know, the the the reason I can't see
it is because I have the camera here.
Oh, I can see it a little better now. A
little bit. Not too much.
Damn.
5 seconds without the camera. I don't I
don't know if I've mentioned this
lately, but filming things, recording
things that you do literally makes each
job about three times as long.
I'm not complaining. I'm just saying
it's just how it is. And that's not
counting editing. I mean like just
shooting stuff. Like if you weren't
here, I would just be running right
through this, but I'm trying to show it
off so everybody can see it. 12 AV6.
All right. And what are these two
I would suppose outputs? They're not
like 6973s
or anything, right? They're going to be
12.
Not AU6. 12. What's the other one? 12
AT7.
You think that? 12.
12 AT7. Maybe. Just guessing.
They're unbranded. I'm just
If I don't rub it all off,
it is
mostly gone. That's what it is.
What are we looking at?
Well, let's try the other one.
I like the little clips so they don't
fall out. I need a bunch of those for my
juke boxes.
They're making it hard on the working
man.
It said on the back of the of the case,
but it also said there were seven tubes.
And uh I'm counting six.
All right. All right. So, I looked at
the paper again, and it doesn't say
seven tubes. It shows six tubes and the
electrolytic cap. And it's marked that
way. So, that's right. Um not the the um
I think it does say electrolytic cap.
the filter cap. Um,
so I tried looking for schematics. Can't
find any schematics. It's a JVC though.
Victor and Del Monaco were JVC. So
that's cool. And I would guess
60s. What do you think? I mean, you can
kind of tell cuz it's tube, right?
But there's no there doesn't seem to be
any unless that's it. There doesn't seem
to be any chassis numbering numbering on
it.
Um, I wonder if there's any date codes
on anything.
Yeah, there is.
I would guess that's 1966,
but I don't know that. But I think so.
And it it seems to
it looks like 1966 to me. It c it's so
whenever I see this, this is how I date
stuff in my head. And this is just my
ignorance, but this is how I do it.
Okay? I've been buying used crap at the
flea market my whole life, right? Um
that kind of light wood tone just
screams 50s.
It's not from the 40s. It's too light.
So it's not it's not that old. So, it's
from the ' 50s and then it was kind of
out of style again in the '7s. So, in
the 70s there wasn't a bunch like that.
Came back in the 80s. But, um,
so just the color of it immediately
you're going to think
50s, 60s, maybe very early '7s, 1973 it
was done. They're on to the dark stuff
right now. Now, they had dark colored
stuff in the ' 50s and 60s, too, but
this one's a light one. So, it's
obviously from the ' 50s and 60s or um
early '7s. Okay. So, then the next thing
that clues me in is there is a little
what's the little little trim piece on
the top of the door of the the top door.
Um, if that was late 50s
and early 60s,
that would that wouldn't be there. It
would be more just plain
or it would have a more timeless look,
right? That looks a little dated. And
so, in my head, that looks like 70s.
It's like, uh, 19 1973, 1974. But then
what I always do, the last thing I do is
I make it a little bit older than I
think it is.
And that's literally that's exactly how
I think about it. So I look at it and I
go, it could be from the 50s. N it's got
that thing on the top. Uh it's maybe
maybe early 70s.
Uh maybe a little older than that. Maybe
mid60s. That's exactly what I would have
thought if I thought I drew it. And the
cap says 66.
I think that's dead on the money, folks.
This also tells you that it's not 50s.
It just doesn't have a 50s look. It's a
little bit newer than that.
I'm pretty good at dating them.
I could try to date all these, but I
kind of already know what all these are,
you know. And on these, you can tell by
the legs. High boy, low boy, console.
Um, except that one completely throws it
all out of whack. But anyway, moving
right along. Okay, so I'm going to
replace some of the caps.
I don't have the schematics.
Uh, you know, we could just try plugging
it up, but I'm going to sell it to
somebody and they may not know anything
about this stuff. So, I would at least
like for most of the caps to be
replaced. The filter caps, yeah, you
should replace those, too. But I don't
have 60. And like I said, I could go
with a 100, but why bother if you're
putting the wrong thing in,
right? That's why that's how I think.
So, I'm going to swap four or five caps
underneath it. I think that's about all
there is to really do and then uh we'll
be ready to test it really. Um I guess I
could test the tubes, but they're all
the original Hitachi ones, so I'd rather
just leave those. And if it works, we'll
leave it like that.
All right, so I replaced all of them.
There were actually more than I thought.
Check out this diode from 1963.
1966.
Absolutely beautiful. That's for all you
people telling me that I absolutely have
to replace the uh silicon
uh the selenium
rectifiers.
There isn't one in this one. So, I don't
have to replace it. Okay. One, two,
three, four, five, six, seven, eight,
nine. There were 10 caps. And I have no
clue why one of them was a paper cap. I
don't know why they did that, but they
did that. There must have been some good
reason.
There's no way
that they would have
I mean this is the exact same value. So
on purpose they made that a wax paper
cap. There's got to be some reason.
And I don't know if I mentioned it
earlier, but this is a JVC.
So it was the early years of JVC. Del
Monaco.
All right. So, I've recapped it. I don't
believe I'm going to test the tubes. I
think I'm going to slide it back in and
we're just going to start her up.
Probably be better to bring it up slow.
Um,
yeah, I think we'll bring it up slow
just for the hell of it. We'll bring it
up slow just to make sure that the caps
the that big electrolytic cap doesn't
get a
a shock to the heart and hopefully it'll
come up slow and behave itself and we
won't get a bunch of buzz in it. So, let
me mount it back in there.
Um, and then I'll hook it up to the
very, uh, the Veritrans and the the
ampmeter and we'll just make sure that
it's not going to short out or anything,
but um, yep, cap kit. Okay, so I'm
putting it back in. One of the things
that's going on is there these are
basically
shock mounts. Um, these two screws. And
I think there was probably supposed to
be a a rubber
like a a rubber O-ring basically on this
side and then probably on this side too.
You know, where it basically loosely
attaches it to this board. And that's
probably what this is is it's
deteriorated. There's one left on the
back one.
But there there's not two.
Um
but at the same time, there's no rubber
melted down there either. So I don't
know.
Look at the speaker.
So I have a big problem, folks.
if this thing works. I I kind of don't
want to get rid of
but I went and looked at my other two
and I like both of them better. So, I
think I I think I am going to get rid of
it. Um this one's a little flimsy. It's
cool, but it's it's just, you know, it's
a little
it's a little flimsy. My other two are
more sturdy. Also, like I said, it's
it's short.
Okay. So, let me continue plugging it in
and then we'll bring her up. All right.
You've probably seen me do this before.
The I have a Veritrans Veratrans. They
call it
Veratran.
Very trans.
I'm going to get this video blocked.
It's a Veratran
um
that we serviced. This is one of our
first videos. And then I've got it
plugged into an ampmeter. And then the
it's plugged into that. So the and
there's a fuse in the veritron. So the
whole idea is if there's a short in the
amp, it's going to start pulling a bunch
of amps. You'll be able to tell. And you
can turn it off as we turn up the
voltage. And if we turn it up, it gives
the u it gives the cap that filter cap
that we left in there a nice slow
awakening.
All right. So let's see.
The writing is a little bit missing.
That's going to say,
"All right, balance off and tone." Okay.
Volume AM
PH of phonograph. And that's going to be
tuning.
Okay. So, it's the second one down. So,
I've got it on zero.
Now it's turned on with no voltage.
So, we'll try turning up the voltage to
like 20 or 30.
All right. So, we got a little bit of
action.
So, it must be on.
Let me make sure I've got it set on AM
and not the photograph.
Okay. Yeah, it was on the vorn.
So, I was thinking that if you bring
them up slow like this, a little bit of
a time, a little bit of time, that it
reforms the caps. But I've heard other
people say that it takes like days to
reform the caps. So,
I don't know.
I was kind of hoping that this pilot
light on the front would work.
All right. So, we're at
65 volts. It's probably 70
and we're at 02 amps.
And it's working.
[Music]
Let me try to tune it.
[Music]
How will I feel after taking an Inustem?
The Inustem is going to have an
immediate effect, but I tell you, your
immune system is starting to function
better
[Music]
at healthyworking.com.
[Music]
[Music]
If you're like most people, you have no
idea what to get dad for Father's Day.
Well, here's a gift idea that you can
feel really good about. Cardium
Mobilebile 6L, the world's first FDA
cleared six lead personal EKG. It can
detect aphib, a leading cause of stroke.
Cardium Mobilebile is the perfect way
for your dad to manage his heart health
at home between doctors. It's small.
Easy to use and records right to his
phone. He is his heart that times the
data. So, I'm I'm messing with the
volume knob. It's I forgot to spray it.
Even for yourself and now for a limited
time, Cardi is giving 10% off. So,
that's our local uh Clear Channel 1110.
It's it's uh just crazy powerful. The
towers is 50,000. You know, clear
channel stations are 50,000 watts and
it's 4 miles from here. Cardium
Mobilebile 6.
You must be in control because when
disaster struck, so it's really it's
much louder than the other channels.
It's just always been like that. And
we're only on 70 volts.
So, I'm going to go ahead and turn it
up.
says 32y old Daniel of Kent, Washington
provided materials to make the bomb is
accused of shipping approximately
180 pounds of ammonium nitrate
homemade.
All right, so it operates at a little
less than
4/10 of an amp.
400. Is that 400 milliamps?
Oh, and the the the pilot light does
work. Cool.
Boy, that's a sexy looking little record
player, isn't it?
Well, if I get the knob on there,
we should talk about all kinds of things
about people's problems and needs. And
there must be a light over over here
that's out, right?
So, we're going down the Dow.
To me, it's pretty selective. I mean,
we're getting a lot of channels.
Checkers. And that's why I feel like
this series, honestly, is like the best
of basketball. And that's because of the
coaches. They've been coaching their
Mahunga
and we'll see who takes game one.
Shouldn't there be a lightning
at 7?
The gauge is here, but you're not going
to be able to see it. Progressive
protects your home. Motorcycle RV and
could save you money. Visit
progressive.com.
So, my my test is always, can I get WSM
in, which is going to be
about where the second knob is.
Somewhere in through here.
It's very possible that you know there's
kind of two answers here. One is there's
high civilizations that we've lost
record of. You know, they're off the
records.
I didn't hear it, but it's got to be in
there somewhere. So, uh WSM is the Clear
Channel station out of Nashville. That's
uh several hundred I guess that's 300
miles. Um, but it's all all old school
country and stuff. It's really cool.
Okay, let me try to put that all back
together and u I'll see if there was
ever any kind of light for it. Well, the
turntable actually removes very easily.
There's these little there's three
screws here, here, and here. And on the
bottom of them,
of course, that's where the spring the
suspension springs are. And on the
bottom of them, they have this little
clip.
I don't know if I'm gonna be able to
show it to you completely.
Anyway, once you put it in, that thing
slides through and then you kind of push
it to the side and it turns sideways so
that it can't come back out. So, if you
reach under and turn it vertical, it
just pops right out. And uh there are
two phono jacks
Oh, look. They are labeled L and R. I
was wondering about that. So R is the
front one.
There's two phono jacks that just
unplug. And there is a power cord that
plugs in. And then there is a ground
that plugs into the chassis over there.
And that's it.
And this is a record changer. So it's
got a little bit more going on than just
the u the motor.
So, I think what I'm going to do, I'm
just going to clean it up as best I can
and then
motor mount or something. And then, um,
I'm going to oil the motor and we'll see
about oiling lubricating the whatever
mech makes the changer work. Um,
is this thing all screwed up?
I guess it's made like that.
I guess it has to be turned a certain
way to go down
and then you spin it and it locks it in
place.
I don't I don't like the plastic nature
of it.
Oh, it does say front on it. All right.
Well, we'll figure it all out.
We're going to need that. It's had some
tape on it. We're going to need that to
get our 45 changer to work, though. The
changer part of the 45 player.
Look, they thought of everything.
There's even a pattern on the uh the the
turntable.
All right, so stylus wise,
that don't look great.
Man, I was hoping that it would be a
ceramic.
Actually, that does look like ceramic,
doesn't
looks like the whole thing is made out
of ceramic.
Stereo.
[Music]
Yeah, I don't know, folks.
I got a part number.
Well, we'll clean it up. Give her a try.
What do you think? Is there any way in
hell that's going to work?
If that's a If that's a If that's a
crystal cartridge, we're schlonged.
All right, but let me clean up the rest
of it and we'll see what we can do. All
right, so I've got the motor out or
apart here. And as you can see, it is
completely seized up. It won't even try
to turn.
And I don't know if that's just the
lubricant that they used at the factory
or what the deal is or if the motor is
burnt up,
but I'm going to carefully disassemble
it and see if I can get that out and
just see, you know, if it's savable. I
think it is, but I don't understand why
there would be be that much grease or
whatever that is caked up on it like
that um
wax, you know. So, what did that come
from? Sometimes you'll see that if like
a transformer melts down or something,
but there's nothing like that on here.
So, I don't I don't get it. Maybe
somebody sprayed something on it. You
know, I'm always quick to uh assume that
it's WD40, but that doesn't that's so
thick. I don't know what that is. All
right. So, I'm going to take it apart
and uh see if I can clean it up. All
right. I was able to get it apart. I
think it's fine. It's just it was just
stuck. The bearings basically were
stuck. I'm going to sand this lightly.
I don't know if that when I see this on
them all the time. A lot of times I'll
take like a crane a motor apart like a
claw machine and the little motors will
have will be like this. They get kind of
this burned look on it. I don't know if
from the factory it's like that or not.
But I I like take a little bit of light
sandpaper and like clean it up a little
bit. And then of course oil both of the
bearings. And these bearings are like
almost like shock mounts or something.
That little piece in there can move. So
you it'll kind of
if you've got it like to the side like
that and you put it back together, you
know, it's not going to be centered. So
you kind of got to mess with it a little
bit to make sure that it's spinning
freely in there and but it'll just move
around. So it's not that big of a deal.
Um that's that one. And this is the
other one. This is the one that looked
really ugly.
And then uh this little piece
sets on the shaft
uh with a set screw. And this is of
course the steps that run the different
speeds on the record player. All right.
So, let me clean it up and we're going
to oil the crap out of it with uh two in
one oil. 3 in1 oil. 20 weight 3in-1 oil.
All right, folks. I've been cleaning it
up. I This thing was stuck. It was just
the the the actual knob though was
stuck. The actual shaft, it just has a
plastic uh cam in there that moved some
things to make the idler wheel interact
with it. And so it was all screwed up,
but I just oiled it and oiled it and
kept working it, working it, took it
where I moved it in and out and
everything. And I finally got it freed
up. And so now it's real smooth. Um, so
16
is the top.
45.
No, 33 is that one obviously.
45
and then 78 even.
That's wild that it has all four. I
haven't had one that has all four yet.
And then there is also a zero which is
kind of like a neutral.
Okay, so the rubber itself I cleaned
with this Rubber Renew product. This
stuff is great. It's really expensive.
And I don't know how much you've watched
my channel, but I don't spend a bunch of
money on anything. You know, I don't
believe most of the snake oil stuff. Um,
but this stuff is worth whatever it
costs. I think it's like $25 a bottle or
$30 a bottle, something like that. It
really I don't know if you saw that
idler wheel earlier, but it was all
screwed up. And it it even makes it feel
soft again. Now, if it's got cracks in
it, it's not going to do anything with
that, but it it it does kind of renew
the rubber.
Um, so we'll see if that's good enough.
Also, I oiled all kinds of stuff. So, of
course, I oiled that and so it spins
nice and freely. Now,
um the record changer
sliding
mechanism in there, um I uh I oiled all
of that so it moves nice and smooth. Um
it's, you know, it is involved with
lifting the the needle up and moving it
around and things. Uh this off one
switch was just fine and I tried to
clean it up as good as I can. and it
couldn't I mean it doesn't look brand
new or anything but it's a lot cleaner.
So, I'm going to clean up the platter a
little bit and then we're going to try
it. Um, of course, I still need to work
on the the um
uh uh pickup. I think it's probably
I I I don't have high hopes for it, but
I hope that I'm wrong. So, um yeah, let
me put the platter back on and we'll see
about the pickup, I guess. Well, I
believe I've got the turntable actually
working and the changer working, but the
the dead cartridge is just dead. We kind
of knew that it would be. If you watched
the previous video, I I uh took one
apart and fixed it. I don't know if I
can do that on this one or not, though.
But I think I'll look into seeing if I
can just find a suitable replacement.
Um,
it's a stereo, so you know, I don't know
that it's going to be as easy as that
other one that I did. Um, which is
actually in that record player right
there. Um,
so but this one I think may be a little
easier to find a replacement for. We
might run into the problem though where
it's not loud enough. So, let me see
what I can find. All right, folks.
You'll have to ignore all the clocks in
the background. I've been working on
some clocks. I ordered this bad boy, an
Astatic
76
TSB.
It appears to be exactly what we need.
It's tested working. I believe it is
also a crystal cartridge though, which
in this situation is probably a good
thing cuz it'll have a higher output
voltage.
And it says right here
somewhere, where does it say it?
Um,
[Laughter]
actually it doesn't say it, does it? It
did say that it somewhere I got the idea
that this is the one. Actually, I looked
in their in their uh cross catalog and
it said this is the one. So, let's get
it out of there and check it out. This
is some really nice quality stuff. I I
wish they still made stuff like this,
but or maybe they do. I don't know. it.
Um, just look at the quality of that. So
well made.
So the two grounds it's showing me are
these two bottom terminals
and then the the two tops are the
others. Does it tell me to put them out
of phase or anything?
It does not. Yeah. So the two bottom
ones it wants you to do as ground. And I
want you to connect them together if you
only have three wires.
I think we're looking good. The mount is
the same.
All right.
And it comes with all this extra stuff.
I think they may have somebody may have
put some
Surely they didn't ship with all of
this. Maybe.
Wow, look at this. This is so cool. So,
the terminals that are already on mine
are like slide on. So, what they've done
is they've shipped you little
you can slide that you can slide this
over the post that's on it and then you
can slide your slide on terminal onto
that. That's just
they've thought of everything. Look,
they've got little solder eyelets as
well that'll just fit right on it. Looks
like there's too much though. They
surely all that didn't come with it.
Maybe. And then the two screws to to
attach it to the head. There's another
one. Okay. So, I'm going to carefully
pull the other one off and uh we'll
compare them. Here's what we had. Here's
what we got.
Looks good to me. So, I think I'm going
to go ahead and swap this.
Even though it looks like I may have
been able to get away with just using
the bracket that's in there, but I think
I'll swap it anyway.
It might This part here might be
slightly different or something.
All right, folks. So, I think I've got
it I got it mounted in there very well.
kind of wired up, right? I actually had
to sand this down.
This
is bigger than the original one. You
can't use the original one because then
it won't lock because the cartridges are
slightly different.
But this thing was so big that it would
actually drag on the record when it was
all the way down. So, you know, the the
it's a stacker, so it can literally
stack records on top of each other,
which changes the angle of the arm.
Well, when it's all the way down on the
first record,
it was basically at such an angle that
this thing would touch the record. So, I
had to sand it a little bit and just
that's just crap you run into whenever
you're using aftermarket stuff. Um, and
I couldn't put the original knob was
just a really small one. I couldn't put
it back on there because the way that it
locked 78 and 33 um was different than
that one. So, it wouldn't work with that
stylus or that cartridge.
So, uh, at the the only thing I can't
figure out is how to adjust where it
lays down after it it drops one. When I
was a kid, I the problem I always had
with them is it would drop more than one
record. But let's see. I think we got
it.
Yeah. But it lands wrong
and then kind of jumps into position.
[Music]
So, we got good volume and the tone
works good, too. Um, I'll let it play
here for a second so that it can't
figure out uh what song this is.
Hopefully, you know, so maybe it'll play
it. You don't have to worry about it.
I've always thought that they get the
timing right. So, if they if they grab
like a little piece of the song and then
if you just let it keep playing and then
turn it back up, I think they can figure
it out because the timing's right. the
spacing's proper. But anyway, I'll I'll
turn it up so you can hear the tone a
little bit.
That's like high basically
and that's low.
So, u actually works pretty good. All
right, so let's go our next one. And
you'll see how it skips when it lands. I
think it's it may actually even be
landing on the edge of the record, which
is not good.
Yeah, I don't think it's over quite
enough. So, I think what's happening is
it's throwing it onto the record after
it lands off the record.
So, I got to try to figure that out.
The other thing I've got to do is I need
to I forgot to spray cleaner in these uh
t these pots.
Um, so from the back I was able to get
the volume one really good.
So it's working great. Um, I was also
able to get the tone one really good,
but for whatever reason I couldn't get
this one. So you lose the right channel
at a certain spot.
So that sounds like the right channel's
gone. But if you mess with it,
it pops in. It's literally the the
it's the pot.
[Music]
All right. Yeah. So, I got to mess with
that a little bit, but I think we're
pretty good. And I need to figure out um
I need to figure out um let's see if we
can tell that there wasn't another one.
Yeah, it could. Cool. Um, I need to
figure out how to adjust where it lays
down. All right, folks. I can't play too
much music or it'll copyright strike me,
but um, we've got it.
[Music]
It's working good. It still does the
thing where it skips a little bit at the
beginning of the record. Um, I'm just
going to tell whoever I sell it to that,
you know, the changer isn't 100%. It'll
play the records fine. It'll play the
45s fine, but it it doesn't have
anything to do with the uh where it sets
down. There's a screw back here to
adjust that uh where it lands, but it
does it no matter where it lands. It has
something to do with the gear underneath
it. And there's no manual or anything or
that I can find online about this
particular changer. So, I'm not positive
how that works or why that's hanging up
a little bit, but it is what it is. But,
it's a nice little record player and a
nice little AM radio, so I'm happy with
it. All right, folks. I tightened up the
legs underneath it, too. The screws are
all loose, and it's it sturdied it up a
little bit. I don't think I can get my
$150 I wanted out of it, but I might be
able to get a hundred out of it. It
looks pretty good. It plays 33s and 45s
and 78s. Um, and uh, it has a nice
working AM radio. It all sounds pretty
good. And somebody's going to think that
it's cool and uh, they want something
from the 50s or the ' 60s, whenever. I
guess it's from the 50s, maybe early
60s. What did we figure out? 60s.
Somebody will want something cool from
the 60s for their apartment or something
at the college. And I don't think I'll
have any problem selling it. So, I'm
going to do a couple more videos of uh
the other two that I've got. And uh I've
looked at both of them and I'm I'm just
I'm convinced that of the three,
although I like this one, it's my least
favorite of the three. So, I'm going to
sell it and hang on to the other two.
So, I hope you enjoyed it. Leave all
your comments below. Let me know what
you think about these old school JVC
stuff and uh I will see you on the next
video. Now, if you want to watch me work
on other record players, I've tried a
whole bunch of them. I made a whole
playlist of all of the record players I
have attempted to fix. So, check these
out. I'll see you here on the next one.
