Privacy Fence Demo - Lessons Learned - 370

Jay Bates
99 followers
3 Video Views·Jul 15, 2025
Sign up for my email newsletter: https://jayscustomcreations.com/newsletter
----------
💰 Coupons to save you money 💰
💲 - Router bits (use code JAYBATES for 10% off - https://bitsbits.com/
🌪️ - EF5 dust collector (use code JAY5 for 5% off) - http://bit.ly/2NlQ9ov
💲 - Save 10% on CMT saw blades at Taylor Toolworks with code CMT10 - https://lddy.no/qi2r
💲 - Save 10% on all MicroJig products with the code JayMicrojig10 - https://lddy.no/ymdw
----------
Social links:
Lbry - https://lbry.tv/@jaybates86:3
Odysee - https://odysee.com/@jaybates86:3
Twitter https://twitter.com/JayBates86
Facebook http://www.facebook.com/jayscustomcreations
Instagram= http://www.instagram.com/jaybates86
i recently took down the privacy fence
around our property and in this video
i'll share a few lessons learned
our house was built in 2007 so the fence
has a maximum
age of 14 years considering it's 2021
and about half of it is in okay
condition and about
half of it is in bad structural shape
with several pickets missing or damaged
my initial plan for tearing down the
fence was to try to salvage as much as
possible
starting with the pickets and i had the
idea of using these to make a rustic
play fort of some kind for my daughter
or something similar
so i started removing them one screw at
a time the screws that were used for
construction were t25
star head screws so they were removed
easily but it only took removing one or
two of the pickets to realize
it was a horribly time consuming idea
plan b
was to start cutting a long blade
reciprocating saw was the first
tool of choice and it worked well to cut
the horizontal two by fours to separate
the panels from the posts
my friend john came over to lend a hand
and at that point we tried using both
the reciprocating saw
as well as a circular saw after a little
bit the reciprocating saw vibration was
quite annoying on the forearms the
circular saw was much easier on the
forearms but
the dust it threw into the air was very
annoying to the face and the skin
being pelted with dust while you're
sweaty from the summer sun
was a deal breaker so we put the
circular saw away and we took turns
abusing our arms
with the reciprocating saw after
exhausting all of my
half charged and unprepared batteries we
switched gears to the post
and at this point i wasn't sure if
concrete was used for each post
but it was our first plan of attack was
to use a farm jack
to lift the post at one of the
horizontal two by four connection points
i'd jack it up a little bit and then
john would push from the other side
up and over up and over up and over and
and while this worked for a couple of
them
it was it was way too much struggle
there had to be a better way
also the panels started to get in the
way at this point we switched gears
again
to start stacking the panels on my
trailer and because most of these panels
ended up being
in much worse shape than what i thought
i thought the only option here was to
take them to the landfill instead of
stacking them for my own personal use
however after some recommendations on
social media i posted them for free
online
and two people ended up getting
everything including the posts
with the concrete back to removing the
panels after the batteries were charged
when working on a large manual labor
project like this i always think of the
better or more efficient way of working
when i'm nearing the end of the work i'm
sure most of you can relate
in this case it dawned on me to use my
chainsaw to cut the panels
when i was on the last stretch of the
fence it's
much much easier on the forearms and
quicker
assuming there's a sharp blade on the
second panel i grazed the side of a
stray screw
and dulled just one side of the chain
which made the blade
incredibly dull and rapidly drift to one
side
i continued with the dough blade for
just a few more panels but
it got it just got too hot and started
smoking the chain oil
so back to the reciprocating saw for the
last time
at this point all the panels were down
and my trailer had one full load ready
to go to landfill so we couldn't stack
any more panels
on the trailer so back to the posts we
removed a couple more the hard way
until john had to leave for the evening
during supper that evening i thought
about a way to remove the posts a little
bit easier
and with one person instead of two and
what i came up with was to create a
pivot point
to get a greater mechanical advantage i
screwed two
eight foot two by eights together to
form a 14 foot long beam
and my idea was to screw this to two
posts
and use the farm jack on the overhang
this would give me a mechanical
advantage to increase the jacking force
while also getting the base of the jack
out of the way of the large concrete
ball coming out of the ground
this worked at first and i continued for
a few posts before realizing
a couple areas for improvement first
there was no need to secure the beam to
the second post it could just
lay on the ground eliminating one
attachment task
second the four three and a half inch
decking screws that i used to attach the
beam to the first post
were starting to bend and eventually
they just pulled out of one of the posts
i needed a better and faster attachment
method the only thing that i had in the
shop that i thought
might work was a 12 inch piece of three
quarter inch threaded rod
i drilled a three quarter inch hole into
the beam and a one inch hole into the
post
in this case the beam can be quickly
attached to the post by sliding the
threaded rod through
and i didn't worry about putting a nut
on the back side because the threads
would dig into the wood and prevent
slipping
this worked surprisingly well so i went
ahead and drilled holes in
all of the posts before continuing this
method was quick
and effective i was able to jack these
posts up out of the ground
by myself much faster and easier than
the two-person method we started with
by the end of day two i had all of the
posts out of the ground
and someone had already taken off all of
the fence panels
day three consisted of getting these
posts to a centralized location on the
property
and then loading them onto someone
else's trailer i was
really shocked that someone wanted to
take these posts but
i absolutely did not complain he said he
wasn't sure what these would eventually
be
but the last fence he picked up for free
ended up being a chicken coop
and finally to wrap up day three and the
last of this
fence demo project i used a garden hoe
to pull as much of the residual dirt
back
into the holes i still need to come back
with fill dirt and finish filling in the
holes
but this as well as mowing the lawn one
final time
was literally all i had time for i had a
three day window before a lot of heavy
rain on the forecast and i finished
just in time so the rest of this is cell
phone images
a few takeaways from this fence demo
first like most all
manual labor projects experience of
actually doing the manual labor
often results in thinking of smarter
ways to get the job done
creating a large lever to jack the posts
out of the ground easily
is definitely my recommended method for
a one-man post removal
second by removing the fence we
immediately gained about five feet of
usable land in the back
of our backyard and not shown here we
have already cleared about 10 more feet
of
vines weeds and bushes to get a total of
about 15 more feet
of continuously shaded area for
something like
i don't know maybe a future play fort
for kids
all of this is still on our property
according to a recent land survey so
that's good and lastly we realized that
we prefer not having a fence in our
backyard
at all so we will likely not build
another one it just makes our yard feel
much larger and gives more of a
community vibe when we talk to our
neighbors outside
so why tear down the fence in the first
place well there's two reasons number
one
because it was nearing the end of its
lifespan and number two we needed to
remove
some of it for a future outdoor
entertaining area and it didn't make
sense to have
that area replaced with new fence and
then leave the old fence it just
just wouldn't match at all now regarding
the outdoor entertaining area we're
contracting most of it out
the contractor will do the drainage work
the slab
and the pole barn style shelter that
will match the shop that's already in
the backyard
i'll do the electrical the bar build any
furniture that needs to be built
the half walls and any other small stuff
if you'd like to see the progression of
this outdoor entertaining area be sure
to subscribe to my youtube channel
and go to my website
jscustomcreations.com
newsletter and sign up for my email
newsletter so you don't miss anything
that i publish i'm sure i'm going to
publish a little bit more on my website
versus my main youtube channel regarding
this outdoor entertaining area
you guys take care have a great day and
i'll talk to you in the next video
