Finally, a return to building furniture is at least within sight. Once we get the insulation in the apartment we are moving in. We will do the interior siding later, as we plan on cutting the trees, making lumber, drying it, and cutting either shiplap or v-groove tongue and groove. That will be a process. We also don't have much furniture, so I will be building everything we need.
Check out TimberKing for more info on my 1220CRZ sawmill, or one of many Made-In-The-USA fully hydraulic mills: https://timberking.com/
Jay's Custom Creations is supported
by Timber King Sawmills.
For more information on my 1220CRZ sawmill
or many other fully hydraulic sawmills,
go to TimberKing.com.
It was much warmer the last time I spoke
with everyone here on this channel.
It's good to see you again.
Well, I guess you guys are seeing me,
I'm not really seeing you,
but anyway, we have finally reached a point
where I'm starting to plan for actual furniture projects.
There is a light at the end of the tunnel
to finally get back into actually making
woodworking projects.
And that light at the end of the tunnel
is this big box over my left shoulder.
This is essentially a two bedroom,
it's like 19 feet by 22 feet, something like that.
Two bedrooms and a bath.
That's what we're moving out of our camper and into.
And then our living room, dining room, kitchen
is basically the shop.
And we're really okay with that.
We're really excited about that.
As soon as I get the insulation put up in this,
we're calling it an apartment, in this apartment,
then at that point, I can start making furniture projects.
We don't have a dresser, we need a dresser.
We don't have, my daughter doesn't have an actual bed.
We need to make a loft bed with storage down below.
We need to make a rock wall potentially in her room
with the gymnastics crash pad area.
And we need to make an office desk
and I need to make a freestanding armoire for our clothing.
We need to make all kinds of fun stuff
that will be back into the realm of actual woodworking.
And I'm so excited about that.
The only thing holding us up or not holding us up,
but the final hurdle to cross
is the insulation in the apartment.
For the insulation, I'm trying something new.
I love having the opportunity to try stuff
that is new to me and that is DIY spray foam.
So this is an option that we can do
that is going to save on contractor costs.
You're not gonna spend a lot of money on a contractor.
You're gonna get the benefits of spray foam.
A closed cell foam will create a nice airtight envelope,
no drafts, and of course it's insulation.
So it's gonna keep the heat in
or it's going to keep the cold in, whichever we want.
I'm really excited about that.
Not the topic of this video by any means,
but again, that is the last hurdle to getting this done
so I can start making some projects.
As soon as the foam is cured
and it's safe for us to go back in there,
we are going to move in
without the interior walls being completed.
And that's because the interior walls
are something that I wanna do with the timber,
the wood here on this property.
I'm going to take the trees down
that don't have beetle damage
so they'll be nice, clean, hopefully very few knots pine.
I'm going to cut those trees into logs.
I'm going to put those logs on the mill.
I'm going to mill the lumber.
We're going to dry the lumber.
And hopefully by then I'll have
either a tongue and groove setup here in the shop
to make my own tongue and groove,
or we will make shiplap siding.
And that's the, I guess the initial plan
for all of the interior walls in both bedrooms
and the bathroom is shiplap
or V-groove tongue and groove interior siding.
That's going to be a lot of fun.
One other thing to look forward to.
So many new opportunities with this property
and I'm just having a blast,
but anyway, I could ramble all day.
Let's get into the meat and potatoes of this video,
which is logs, lumber, sales, and trades,
or something like that.
I think that's what the title of this video is going to be.
Logs, lumber, sales, and trades.
That pretty much sums up our entire fourth quarter of 2025.
And in this video,
I'm going to run through nine different things,
starting with rustic pine.
Now I'm considering anything that has beetles in it
from our property as rustic pine.
And I let the customer know this,
that these boards all have that blue streaking,
which is introduced by a fungus
or introduced from the beetles,
which is caused by a fungus.
And it also has the holes from the beetles themselves.
So none of this is, you know,
nice clear pine that you'd see at a home center.
All of it, I'm listing for sale on Facebook marketplace
for a dollar a board foot.
I've had several people that are interested in it.
One in particular who says going forward,
you just let me know how much you have milled
and I'll come get it at any time.
So not quite sure what they're all using it for,
but there's definitely a market out there
for this rustic pine.
I scored two free red oak logs from the side of the road,
about two miles away from our home.
Our uncle was driving by and saw them
and someone had a free logs sign on the logs.
And my uncle contacted me.
I contacted that person and next thing you know,
I brought my tractor over there and loaded them up.
Now these two logs were way too long for my trailer.
They're around 19 or 20 feet long.
I forget the exact length.
So I had to cut them in half,
turned two logs into four logs
and was able to load them up on our trailer.
Now, the cool thing about this particular score was,
like I said, it was two miles from home.
So I could drive the tractor over there
and my wife could drive the truck and trailer,
load everything up,
and then she can drive the truck and trailer back.
And then I can drive the tractor back all on the road
without having to tie up the trailer
with the logs and or tractor.
That makes sense.
So that was pretty cool.
Got all these back.
These are four red oak logs
and I listed them for sale on Facebook Marketplace
just to see if there's a market for them
and there really isn't much of a market for red oak.
But I was able to mill one of the logs
into as many two by six boards as possible.
And that particular job brought in $200.
So on these four red oak logs,
I've already made 200 bucks minus the cost of fuel
and about an hour's worth of time going to go get them.
And I still have three of those logs available
for whatever.
Also at that same place, that same property,
the gentleman was doing some cleanup,
had a couple of trees taken down
and there was a bunch of limbs, red oak and ash limbs,
that were big enough for firewood for sure.
Not quite straight enough for sawmill logs,
but we ended up getting a full load of firewood logs
from again, the same place.
And we hope to have a wood burning stove
in the shop this winter,
but financially speaking,
I think that we won't for this winter,
but we should have one by next winter,
which is convenient because everything
that I'm splitting here is too wet to be burning,
I guess, right now.
So this wood will be convenient, I guess, for next year.
Nolly, don't be taking my firewood, buddy.
Come on, bub.
Go.
Ah, go.
Nolly, go.
Now, speaking of that red oak,
on those Facebook marketplace listings for the red oak,
a gentleman by the name of Mr. Jack contacted me
and offered me a bunch of red oak logs and firewood.
It's a very similar situation.
Mr. Jack is cleaning up his property, thinning some areas.
He actually hired out, well, had a logging crew come in
and take down a bunch of red oak trees.
They took the best of the best, went to the mill,
came back with a very miserable paycheck
and told Mr. Jack that, here's your cut.
Sorry, we've got to abandon this job
because there's no money in red oak right now.
So what Jack was left with was a bunch
of already cut up red oak logs that nobody wanted
and a bunch of already cut up, piled and stacked
red oak limbs that are perfect for firewood
that, again, nobody wanted.
So he went from having the potential
to make a little bit of money
to now having this problem where he's got to get rid
of all of this material that's just sitting there.
So his option was to just burn it
or find somebody to give it away.
And I said, I'll come get them.
So it was 20 minutes from the property, not too far.
And I ended up getting 18 red oak saw logs
just for the cost of going to get them.
They were already cut up and ready to go
as far as cut to length.
And for this particular trip though,
it was too far for me to drive my tractor, of course.
So I had to haul my tractor over there,
use the tractor to load up the trailer
and then haul the logs back,
use my Jeep to winch the logs off
and do that several times in order to get all of these logs.
And that was quite the process.
After the logs from Mr. Jack,
we went back and we got a bunch of firewood.
Now the first load of firewood,
we cut up an entire seven by 16 trailer.
So my trailer is seven by 16, cut all of it up,
loaded it up and donated it,
took it to a friend of ours who's retired
and someone who again,
just had a wood stove installed in his home,
won't be able to use this material this year,
but it'd be a good headstart on next year's stash.
Now, Mr. Jack is a very, very kind gentleman.
He's just trying to clean up his property,
not trying to make a killing on any of this stuff.
So he gave me all of the red oak that was in his way.
And then he asked me to purchase,
if he could purchase from me,
some board and batten lumber off the sawmill and pine
so he could close in a pavilion down at his pond.
And I thought, you know what?
That's absolutely silly.
You have given me a tremendous amount of logs
and you say that there's more coming
and now you're wanting to buy some cheap pine from me?
No, we'll go ahead and we'll cut the pine for you
and I'll give it back to you as a way of this negotiation.
And I still feel like I got the way better end
of the bargain here.
The problem is I don't have any pine trees
that are not damaged by beetles that are already down
or pine logs.
So I needed to harvest one of the largest trees
in my pine stand,
because this job was going to do two particular jobs.
So I took down, at that time,
the largest tree I've ever harvested.
It was, if I'm not mistaken, a 28 inch diameter pine.
And this was an absolute bear to work with.
It's freshly cut.
So it was, you know, it's Southern yellow pine.
It's a softwood, technically speaking.
It's not the density of oak or anything like that,
but it was wet.
It was heavy.
And it was a bear to work with on this manual mill.
I will say that.
But I produced some very, very beautiful
10 inch wide pine boards.
And this, like I said, was a double duty tree.
It took care of two jobs
because I also had another order
for four 10 by 10 by eight foot beams for porch columns.
And I wanted those to look really nice.
I didn't want to provide anything that was a bunch of,
you know, had a bunch of beetles in it
or damage in that regard.
So this one tree took care of two jobs,
produced some beautiful, beautiful lumber,
beautiful, beautiful beams.
And it gave me a lot of encouragement and excitement
for when I start cutting down some of these
good quality pine trees for projects
that we want to work on with what we have going on
on the property for the house and for the apartment
and for all of our projects and whatnot going forward.
One by 10 by eights.
And this is just, I mean,
it's other than that knot that keeps showing up,
it's just gorgeous.
Got a little sap staining on a couple of the boards, Grace.
It's nighttime, Grace.
You still want me to throw it?
Here's my Gracie Gracie.
Go get it.
All right, so these boards are just,
they're just gorgeous, right?
So that one log gave me a 10 by 10
and it also gave me 10 one by 10s,
true one inch, true 10 inch.
And this job is 30 one by 10 by eights
and 30 one by three by eights.
Now these are some of the off cuts
that I cut off to get down to 10 inches wide.
And look at these.
It's just beautiful, beautiful, beautiful.
Quarter sawn pine, gorgeous stuff.
Like I'm just, I'm geeking out over this stuff.
I love pine.
And this is like the best specimen
that I've taken off the mill so far.
Now it's turned into like just an absolutely huge chunk
of us, you know?
Yeah.
Over the summer, I helped my friend Nathan
install a giant culvert way off in the woods
on his property.
And he's also the one who gave me two ash logs
that I cut up and mentioned in a previous video.
We've been doing a lot of helping back and forth
and he needed some lumber to upgrade his chicken coop
and he knew that I was in the market
for a small trailer to modify to go through our trails.
So I milled up a bunch more beetle damaged pine
and in exchange for a homemade trailer
that was made from parts of a Volkswagen.
This trailer, I've got some plans for,
who knows when I'll get around to it.
But I kind of want to make a small flat deck trailer
that I could put different attachments on top of
like a trough for long poles and sticks.
That way I can use the pallet forks on the tractor
to load up this trough, go through the woods,
load it full of holes or sticks that are, you know,
nowhere near big enough for the sawmill,
but are big enough in diameter that I can unload the trough
and then use a chainsaw to cut all of these at once
at around 16 inches or so for firewood.
Back to Mr. Jax for more firewood.
And this time it was a load of firewood for us.
Now, like I said,
we want to get a wood-burning stove in the shop.
We were hoping to have one in there this year,
but everything we're cutting now is for next year.
And if for whatever reason,
something crazy happens and we don't get a wood-burning
stove by next year, which is highly unlikely,
then this is like an insane amount of cooking wood.
I've got a big smoker and I like to smoke meats
and cook off of it.
And this is just fuel for that.
So it's good for us to get it anyway.
Now, why am I getting all this firewood
from a different property when we have, you know,
98 acres of woods left?
Well, because I don't want to harvest anything,
any hardwoods off of my property if I don't have to.
Not until at least there's a reason to take the tree down.
Number two,
all this stuff is just going to be piled and burned anyway.
So it's incredibly wasteful to let it just be piled up.
It's free.
It's just a little bit of fuel and time to go get it.
So we got a bunch of firewood for ourself.
It didn't last long.
I said, that didn't last long.
I understand, like I was using it out there at first
and I was like, okay, I'm hot now.
Check them off.
Ha ha.
You got it.
So there's the kitchen outside.
Let's see.
That's a lot of wood.
That took us, how long did that take?
Eight minutes and three seconds.
Also at Mr. Jack's, we started, well,
and completed a relatively sketchy hillside
extraction of a lot of shag bark hickory.
Now this problem started last year
when a tornado came into the area
and it knocked over one hickory,
which if I'm not mistaken was leaning on another,
which caused some problems with some other trees.
And Jack actually liked the way that it kind of opened up
a view that he has on his property.
So he ended up taking a few more trees down.
And that's when I arrived on the scene basically.
And I was able to cut up all of these logs,
all these trees into logs
and anything that our chains could reach,
we extracted on the side of this relatively steep hill
with a skid steer.
I ended up with 15 sawmill quality logs
at just the cost of my labor for the day,
which I'm recording everything.
So if I'm doing something, I'm being productive
and fuel to go get them.
So a huge, huge score as far as I'm concerned
and a huge, huge score for him, Mr. Jack,
because he got someone to pick up
and clean up this mess basically.
Hello, big boy.
Perfect.
Is that good?
Now, once again, Mr. Jack is basically the gift
that keeps on giving.
It doesn't end there.
One man's trash is another man's treasure.
He wants this stuff gone and I want the stuff.
So next up, this particular stuff is a huge hickory
that is starting to die.
The tree did not produce a full canopy of leaves
this past year.
And he said, it's starting to shed some pretty large limbs
that makes him not want to walk under the tree anymore.
So this tree has to go.
So now this is currently the largest tree
I've ever taken down.
It's 32 inches in diameter at the base.
And I did it with a 24 inch, $150 cheap Chinese chainsaw
that has just been an absolute tank for me.
But this was quite the experience.
It was leaning quite a bit.
I was concerned about it barber chairing.
If it was possible,
I don't know if the lean was that aggressive.
Like I said, he said it was starting to die.
So how hollow and dead is the inside?
Did we get it in time that it's nice and solid?
So many unknowns that I just simply didn't know.
So I took the biggest ratchet strap that I have
and I ratchet strapped right above the cut
that I was gonna make,
where I wanted to take the tree down
to prevent it from splitting.
I don't know if that was an end all be all solution,
but I read online that it helps.
So there's that.
Now, once the tree was down,
then I was able to limb up the top
into bite-sized chunks for Jack
to take away with the skid loader.
And then I logged up the trunk into a bunch of logs.
Can I get in there or do you want me to help?
I think I can keep you going on the skid steer if you want.
Cool.
This bottom one's off.
And then that one right there is off.
I'm gonna get you something going on that side too.
I didn't bother taking any of the limbs
or the small twisted up gnarly part of the top of the trunk.
I just have, at this point, an abundance of firewood
that's gonna take me a while to go through.
This would be great wood for a smoker.
The thing is with stuff like this,
you can list it for free on Facebook Marketplace
or even Craigslist.
Just come get it and it's completely free.
But there's very few people like me, apparently,
that actually wanna go do that.
So I have an abundance.
He ended up just pushing the majority of the top
from this tree, which was also half-rotten, down the hill.
And he'll either let it rot or burn it in place
just to get rid of it.
But what we're left with is some pretty large diameter
hickory logs for the sawmill.
418.
I didn't get here till noon.
Sun is starting to set already.
And these are some big logs.
Largest log, or the bottom log, is 32 inches in diameter.
And that is over capacity for my tractor
to actually pick up with the grapple,
which is my preferred method of moving these logs around.
Easiest on me, anyway.
So for these, I had to get a chain
and just kind of pull them off the trailer one by one.
And I don't know exactly how I'm going to mill these up
on the sawmill, but I think my strategy is to just
slice them right down the middle with the chainsaw first,
and then take each of those much more manageable size pieces
to the sawmill to get a bunch of lumber
out of what's available.
And that brings us to where we are present day.
I have so many logs, so much firewood to get through,
so many calories to burn.
I'm going to be busy for the foreseeable future, for sure.
Of course, the firewood pile keeps growing
and I keep chipping away at it on those mornings
where I don't really want to do anything.
Get out of bed, ah, just really hard to get going.
Well, those are the mornings where you come out here
and you split some firewood,
you make a little bit of a dent in it,
chuck it into a pile, and you get the blood flowing,
and the rest of the day seems to work a lot better
after doing that.
This is the last load of material from Mr. Jack's.
The final last load, such a cool dude.
This log right here is the third log up the tree
on that 32-inch hickory,
the most previous one taken down.
Two more red oak, probably sawmill logs,
sawmill straightness.
The rest of these are more firewood.
So no urgency to get the firewood cut up,
but I do need to get my trailer back sooner
rather than later.
These two logs are log number one, that's the base log,
and it's the second log right here off of that big hickory.
Now this log, I haven't measured this one.
That is 32 inches on its big side at the base,
and I think the top is right at 32 inches as well.
It doesn't look like it shrinks much at all.
This one does look a little bit smaller, not by much,
but this one, because we have these big branches
coming out, there's four branches right here.
Oh, there's another one over there.
I think this will make some pretty interesting slabs.
So this one, I'm probably gonna designate the slabs,
and this one, there's not really much going on with the tree.
There's two smaller limbs, but they didn't get too massive
as far as what I could tell.
And so I think this one's gonna be better suited
for actual dimensional lumber,
and this one better suited for slabs.
Now, like I said, too big for my tractor to pick up,
so I'm probably gonna have to slice them
down the middle somewhere, and then take each half
and put each half on the sawmill.
So I'm gonna have to be very selective
with the axis in which I slice these down the middle.
Not entirely sure.
Now, these are the biggest logs that I have by far,
but these two hickories were the biggest logs
that I've had.
This one is the base log, and it is 28 inches in diameter
at the big side, 26 at the small side,
and it's too big for my tractor to lift.
I can lift 2,200 pounds with that tractor,
and an online calculator told me this was 2,800 pounds,
if I'm not mistaken.
Well, 2,200 pounds minus the weight of the grapple,
which is around 400 and something pounds.
Anyway, I can't pick these up.
I sure as heck can't pick these up,
but I'm interested to see what the inside
of both of those look like.
So that's gonna be interesting.
Over here, I have what's left
of my 10-foot-long rustic pine pile.
When I did the log yard rearranging,
I stuck this in the absolute worst spot
because it was one of those situations
where just get it moved, let's get going,
and move on and learn from it.
Well, I learned if that's a horrible spot,
I gotta put these pipes underground
and it has to go right through there.
Well, the straightest shot is right through there,
so I was trying to work through this bunk first
to get rid of those, and I'm keeping all three of those
as runners to go on the ground
as I completely shift the log yard that way.
I don't wanna move these logs any more than I have to.
Oh, the wind is picking up and it's cold.
I don't wanna move these logs any more than I have to,
so I'm gonna work through these piles,
but all the new piles are gonna go over there.
So these two logs are what's left
of that really big pine that I took down right over there.
So these are gonna be nice and clean
with no bug damage at all.
And then these three red oak are three of the four
that came from those two big ones
that I found on the side of the road,
that were free on the side of the road.
And I have no use for those three right yet,
so they're sealed with anchor seal
and they'll just sit for a while.
The rest of these are eight-foot beetle-damaged pine,
eight-foot beetle-damaged pine,
and 12-foot beetle-damaged pine.
Gotta get through these.
Once these three, once we get through these bunks,
everything's gonna keep being shifted
that particular direction.
And over here is where I've already started
with the rest of the material that I got from Jack.
So this bunk over here is all of the already cut up,
ready-to-go red oak that the logging company
cut all these up and then just abandoned
because there wasn't enough money for them.
So this was just an absolute quick
and easy phenomenal score.
Now it's red oak.
It's not white oak.
It's red oak.
It's the less desirable of the oaks.
But at the very least, if I can't find a use for this,
which doesn't sound likely, at the very least,
it's enough supply of cooking firewood for me
for the rest of my life.
But no, this is all sawmill quality stuff.
And time will tell where this stuff belongs,
but we'll find out.
That's 18 red oak logs that were already cut,
ready-to-go that I just had to grab.
And then all of these, this is 15, I think it's 15,
of the shag bark hickory that we pulled up
from the side of that hill.
So between just these two piles,
that's 33 logs that I got from Jack,
plus everything that's on the trailer that I got from Jack,
plus those big monster hickories that I got from Jack.
I'm telling you, you need to look in your local community
and find yourself a Mr. Jack.
The sawmill process refinement continues.
This is a manual mill that I'm trying to see
how these hydraulic mills operate more efficiently.
And the best thing that I've found
is to just drag all the material back.
So I'm experimenting with throwing
just this little tray up here
to allow material to slide down on this tray.
And then we can slide it to these much lower sawhorses
to clean up and then slide it from these sawhorses
to the bunks that I moved once again over here
to be moved off later after it's sticker stacked.
I had to move the bunks over here
because that area right there is somewhat flat.
At least it's the same plane as this area.
So using the tractor forks,
the pallet forks from over there coming into here
is much easier to get rid of this pile
than it was when I had it right here
because that ground's not flat
and the tractor's off on all kinds of different angles.
And trying to get it this way
was just an absolute frustration.
So a little bit of sawmill process refinement.
Another project that I have upcoming
whenever I get around to it, who knows these days,
is I'm going to build an outdoor miter saw station
that spans from between these two windows.
No, no, no, no, that's wrong.
It's in between these two windows.
It starts over there on that side,
goes this way and terminates at the inside of this window.
That's what it is.
A big, nice outdoor miter saw station
with just open shelving storage down below
and maybe some, almost like a bookcase storage above it.
But nothing crazy out here for long-term storage
because everything just gets so incredibly dusty outside.
Like I said in the beginning of this video,
I'm reaching the point where there's potential
to actually start building furniture
and start building projects inside the shop,
which is really, really exciting.
But I also have all kinds of stuff going on
outside the shop.
So lots to look forward to,
lots more for us to do,
always staying busy in a completely different way
than it was, I guess, two years ago.
But I invite you to check out our Homestead channel,
BPO3 Homestead, that stands for Bates Party of Three,
posting more frequently over there.
I try to, the goal is to publish every other day
or every two days,
but I've really been slipping in this past fourth quarter,
just so much stuff going on and it is what it is.
But anyway, that's it for this one.
You guys take care, have a great day,
and I'll talk to you hopefully sooner rather than later.