We've been working on this beat up Bally Supersonic Pinball Machine, the playfield is incredibly worn, let's try to paint it back!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's
Classic Video Games back with another
cool pinball repair video for you this
evening. We have been working on this
valley supersonic pinball machine from
about 1979
and we had a friend pick this thing up
for us very inexpensively. And when we
got it, we figured out that well, we
already knew that there were two boards
missing from it. We started working on
the the other boards and figured out
that there was a short in one of the
boards that had fried every chip. Well,
pretty much every chip on everything
electronic in the game. So, we have
slowly been going through and fixing all
of that. And we've actually got it up
and running. But now we started working
on the playfield because the playfield
is all also completely destroyed.
This is actually better than it was in
some ways because in the last video we
cleaned it up to prepare it for
uh trying to repair the the wear on it.
Now, we are not going to be able to get
this to a 10 back to factory original
shape or anything like that. Like I
said, it's from 1979, so it's 46 years
old at this point. But we can get a heck
of a lot better than this. So, that's
what we're going to do today. We're
going to mess around with the playfield
a little bit. Um, this thing
doesn't really have art on it. Almost,
well, pretty much all of it is just
geometric shapes. So,
essentially the way we repair them when
we hand repaint them is we just treat
them like a big coloring book. So, I'm
gonna the first thing I'm going to do is
I'm going to take a black acrylic paint
pen and start inking the lines back in
that are missing from it. Once I do
that, it'll kind of define the space to
where we can um be aware of where the
colors start and where the colors stop.
So, for instance, they were also silk
screened. So, if you look at them,
there's only a couple colors actually
involved.
So, you have a blue
that's used in several spots. You have a
yellow that's used in several spots. You
have an orange that's used in just a few
spots.
That's three. You have a red that's used
in a few spots. That's four. Uh, and
then you have this
maroon looking color. That's five.
And then you have white, which is a kind
of like a cream.
That's six. And then you have black.
That's seven. So there's only seven
colors.
So it looks
it looks like, oh, it's impossible to
restore it. And I don't even know if I
want to use the word restore, but it's
not that big of a deal. Come on, people.
It's not that big. It's It's Don't worry
about it. We'll take care of it. Don't
worry about it. So, it looks like to me
the easiest one to do is going to be the
blue cuz it's only used in a few spots.
It's It's this big area in the middle,
but that's it, you know, and a little
bit up there. Um, and then the red is
not that serious and the orange is not
that serious. And then if you look at
it, there's really not that much yellow.
And then once you do all that, there's
really not that much. It's no big deal,
people. That's what I'm saying. All
right. All right. So, let me get the
acrylic ink pen. Now, we the reason we
use acrylic is because when we're done,
we're going to clear coat the thing.
And, uh, acrylic is just really easy to
clean up. It's really easy to touch up.
It's really easy to mix. It's really
easy to spray over. So, whenever we use
just rattle can spray paint, it goes
over acrylic paint very well. If you
were to use oil-based paint and then
spray paint over it, the catalyst in the
spray paint sometimes reacts with the
oilbased paint and uh, causes problems.
So, a Sharpie for instance, big freaking
no no. So, when we do these black lines,
we're not going to use a Sharpie. We're
going to use a black acrylic paint pen.
So, let me go get that.
[Music]
[Music]
far.
Down.
[Music]
[Music]
[Music]
Heat. Heat. N.
[Music]
[Music]
Heat. Heat.
[Music]
[Music]
[Music]
[Music]
[Applause]
[Music]
[Music]
Heat. Hey, Heat.
[Music]
Heat.
[Music]
Heat.
[Music]
Heat. Heat.
[Music]
[Music]
Power.
Hey.
[Music]
Hey,
[Music]
hey,
[Music]
[Music]
[Music]
[Music]
All right.
[Music]
Number
[Music]
Oh,
[Music]
heat.
[Music]
Yeah.
Yeah.
[Music]
Heat. Heat.
Heat. Heat.
Heat. Heat.
[Music]
Heat. Heat.
[Music]
Heat. Heat.
Heat. Heat. N.
[Music]
Heat. Heat.
[Music]
Heat. Heat.
Heat.
[Music]
Heat.
Heat. Heat.
[Music]
Heat. Heat.
[Music]
[Applause]
[Music]
Heat. Heat.
[Music]
[Applause]
[Music]
[Music]
Heat. Heat.
[Music]
[Music]
I
[Music]
[Music]
Hey.
[Music]
Hey. Hey. Hey.
[Music]
Heat.
[Music]
[Applause]
Heat.
[Music]
Hey,
hey, hey.
[Music]
[Applause]
[Music]
[Music]
Heat. Heat.
[Music]
[Applause]
[Music]
Heat. Heat.
[Music]
[Music]
Hey. Hey. Hey.
[Music]
out of
heat.
[Music]
Okay. So, I think we did pretty decent.
Um, you saw what I did. So, this little
arc over here I just drew in freehand.
When you're doing a like a arc like
that, and it's as if you freehand it. If
you want to like trace it out and
project it and all that, you can do
that, too. But if you're doing it
freehand, like I'm left-handed, but it
would be the same for a right-handed. If
I take a pen and try to draw an arc like
that, that's hard to do,
right? So, if I try to do this, that's
hard because it's not natural. It's not
how your arm moves. So, but if I take a
pen and try to do this, it's very
natural. It's a lot easier. So, you can
get a smoother line doing that. So, when
you're doing it, you know, you might
want to, if you come over here, it's
easier to do the arcs. It just depends
on which side, but like if I'm doing
this, it would be easier to be here to
do it. And I was trying not to block the
camera as much as I could. The stars
were the hardest part. Still not
positive on that one. It's a little off.
I could point out what's off about it.
But and uh remember too, these lines
there, some of them are too thick, but
I'm going to paint right up to them on
both sides so I can thicken and thin the
line. And you can also use that to move
the line slightly if you're trying to
make it a little better. Um, but
basically most of the missing art is
back. I'm looking at the uh the
numbering down here, too. And I like
that because it's just block really
easy. So, I might be able to get that
where it looks at least halfway
presentable. Um, we'll see. These ones
where it's too like it's it's cream and
black, those are going to be the
hardest. And these here, it's going to
be hard for me to get that to look
right.
Um, but I got the I got that star pretty
nice. It's a little off. Again, I could
point out what's wrong with it, but I'd
rather not. Um, I might be able to fix
it a little bit with the paint. Um, and
I wanted to point out, too, that when
they put these protectors on, it already
had wear on it. So, that is under the
protector. So, that's going to just stay
like that. But, it's fine. It's not too
bad. Um, and the two S's I got pretty
symmetrical. They're not perfect, but
they're h it's pretty good. I think a
lot of people won't be able to tell once
we get all the paint on it. Now, there's
more stuff up here like lines and stuff,
but they're not as, you know, this was
the part that I was concerned about
getting the arc back where you could
kind of tell what was going on. Um, and
I think I did pretty good.
This is a little off. I might arc it out
a little bit more. Um,
yeah, I might do that. The bottom one
looks pretty good. Or maybe the bottom
one's too big. I don't know, people. You
know, the enemy of good enough.
Perfection is only the enemy of good
enough.
It's good enough. Um, okay. So, I'm
trying to think what color we want to
do.
Maybe we do orange first because it
might be the easiest. Sometimes you have
an orange right out of the bottle that
just matches. So, let me get my oranges
and see if there's any that are even
close. And then we can we can if we have
to, we can um just paint everything
orange. Like if it's a little bit off,
just paint everything and then it's not
off anymore.
Okay, folks. So, we're going to do the
orange. Uh what I did first though was I
did the cream. And the reason that I did
that was because the orange is such a
thin color.
It's hard to paint it over just bare
wood. It's going to take 10 coats. You
kind of need a primer. Um,
so I got some of the buttermilk paint
that I have, put a little bit of green
in it, made it a little more green, and
then uh painted it on the playfield. So,
I went ahead and did the parts that are
supposed to have it like that
and that. And then I also used it in the
lighter parts, the yellow and the orange
uh where it was down to the wood. So,
just to kind of give it a primer on the
on the uh burgundy and the blue, you
don't have to worry about it because
it's um I guess we'll see about the red.
I think I've got a red that's thick
enough though that it'll cover it. Um
and if not, I can put more primer on it.
But, uh you just you've got to get I
didn't do the yellow in the middle, so I
will be doing more primer. You've got to
get uh you've got to get something on
there just to build up the paint because
what'll happen is you'll you'll go ahead
and put your orange on and you'll see
the like the wood grain area and you'll
you'll still see the grain one coat.
Then you do the second coat, you can
still kind of see the grain and then you
do the third coat and where the the
original paint was there next to it
lighter and you just fight fight fight
it. So we'll see if that happens here.
So, uh, why didn't I use white? Well,
just my thought process. I'm doing the I
might as well do the u this was white,
but it's faded now, right? It's turned
green. So, I went ahead and just kind of
mixed up a concoction that's similar to
what's on there. Everything on it white
is no longer white. Um, the whole
playfield has kind of greened. There's
like a green haze over it. It's kind of
once you see it, you kind of get it. I
used to think that it was yellow, but
it's not yellow. It's green. So,
everything has turned a little bit more
green. The reason that that has happened
is because it's it's not the um it's not
the clear. A lot of the clear is gone.
It's not nicotine, which a lot of people
think. Uh what's going on is all of the
red has faded. And the opposite of red
on the color wheel is green. So,
everything looks more green because all
of the red has faded. Um so, and it's
not, you know, there's red in
everything. So even the blue has a
little bit of red in it. So the blue has
faded more green. The burgundy has faded
more green. The orange has faded more
green. And if you get good with color,
you kind of see it. You can kind of see
it with your eye. So often times
whenever I'm trying to mix a color that
matches or or is close to the faded
color, I'll add a little green to it
because it'll just kind of push it
towards that. Now, it's not really a
perfect
um way of doing it because the it's it's
not really that everything's more green,
it's that everything's less red. But you
can't make paint less red, you know? So,
you kind of use green since it's across
from it on the color wheel to try to
push it that way.
Um
I left the S how it was. I thought that
was close enough. I like it like that. I
think it looks great. I'm going to leave
it. It's not perfect, but I'm happy with
it. Uh, so I've got several oranges
here. And again, the orange is a little
more green than it would have originally
been. So I've got this one, which is a
really bright one.
Uh, on the camera here, it looks like
that's similar. But here, to my naked
eye, it does not look similar. Now, I
have noticed in the past that however it
looks on the camera, once you clear it,
it kind of comes out that way. So I
don't, but this one is so bright, I just
think it's too bright. So, it's orange
flame.
So, we're not going to go with that. So,
then I have this bad boy. This is called
warm sunset.
And to me, it's a little bit dull. Like,
it just doesn't look it doesn't have the
vibrance that the or original orange
had. That's just my opinion. Oh, another
thing. If you're if you start with paint
that's too dull, like it doesn't look
vivid enough, it's not it doesn't jump
out enough, you can't fix that by mixing
acrylic paint. It's just never going to
do it unless there's some way I haven't
figured out. Um, so it's better, it
would be better to take like this orange
flame that's just too vivid and mix
something else into it to make it less
vivid. You can't make it brighter. Like
it's I mean, you can make it lighter,
but you can't make it brighter, if that
makes any sense. And it's all it's all
like an art, you know? So, you're you're
not going to get everything perfect.
Okay, so this is bright orange. We
actually use this on a lot of stuff and
it looks kind of similar,
but it's a little bit too bright. I
think it's just not quite as dark as it
should be. Now, when we're looking at
like the bottom of the bottle, well, I'm
you're looking right at the paint, but
it actually once it dries, it will be a
little bit darker than that because it's
wet paint and you're looking at it
through this plastic, which uh gives it
just a slightly cloudy look. So it it
slightly lightens it. So uh I just, you
know, just to quickly kind of decide
which way I want to go, I just look at
the bottom and say, is that close? And
if it's close, we go with it.
So that leaves me with these two. I
don't know which one to pick. This is
Canyon Orange. Now, at first look, it
looks kind of dull, but if you look at
it compared to the Playfield,
I can't turn it upside down because I
got the top off. And I'm about out of
it, too, by the way. If you look at it
compared to the Playfield, it's very
similar.
So, that might be one. Here's the lid
with some dried paint on it.
Again, on the camera, it looks a little
different, but here in to my naked eye,
it looks almost exact. So, I don't know.
Should I trust the camera or my eye? I
think I've trusted my eye before, and
the camera actually told the true story.
So this is Jacko'Lantern orange. We have
used this on a lot of stuff too. And
same thing. At first it kind of looks a
little bit too light,
but if you look at the
the paint in the lid, uh it's similar.
So I'm Your best bet if you can do it is
to get
thunder. Your best bet, if you can do
it, is to get a paint that is close
right out of the bottle.
Preferably great right out of the
bottle. Right. So, there's a little bit
more.
Yeah. I don't know. I think it's a
little white. So, maybe we'll try this
if it's not all dried up. If there's
anything left in here.
Have we got anything in there? I think
we do. So, maybe we'll try some of that.
and uh we'll just test it and just see
how it looks on the playfield next to
the other orange that's already there.
See if it looks similar and we'll go
from there. All right. So, I painted the
tea with it. Just one quick coat. Ah, on
the camera here, it looks almost exact
here. And to my naked eye, it's a little
lighter. Uh but the problem is where
they've got those uh myar discs, it's
going to look different no matter what.
Like compare that red, which is the
original red, with that red, which is
the original red. Like compare that red
and that red. Are they the same?
No, they're different. And it's it's
always going to be like that. So,
I don't know that I can get it perfect.
But I will say where it's drying, where
it's not painted over the the lighter
primer, where it's painted over the the
Well, I don't know if I can't remember
if that was the actual orange or if that
was missing. Um, but it looks about the
right color here. Just over here, you're
seeing some of that primer through it.
So, it looks a little lighter. Also,
whenever you clear it, it will make it
just slightly darker, too. But it's
going to do everything like that. So,
whenever you whenever I spray it clear,
it's going to darken up everything. Um,
so theoretically, if you were m like
we've got this and this are two
different colors right now because
that's my replacement color, but I
didn't do that one because it was fine,
right? So, when I clear it, that's going
to darken up a little bit, but that's
going to darken up a little bit, too.
It's not going to like just darken one
to where it looks more like the other,
unless you only clear that part.
So, uh yeah, I think that's the right
color. I'm going to roll with this. And
I just need to put uh
extra extra coats on it. I did this
little part over here, too, just for the
giggles. And it's the same thing. It's
got white primer behind it, so you can
kind of see it. One of our viewers
mentioned, "What did they nail the
outline open?" Yes, it appears they did.
Uh that nail this this just goes on that
side of the nail. It's supposed to the
nail stops it, but they have it behind
the nail so that the outline is always
open because people like to cheat
dastardly.
Okay, so I've did the orange. There's
not much really that's orange. So, there
was a little touchup over here. Again,
we need to ink the lines back in. And we
need to cry coat it. There was some
orange here. I didn't do the whole
orange on the right because um I think
it'll cover up pretty well the touch-ups
once I put the black lines in and put
the text back on. Then the one on the
left, same thing. You've got that arrow
there. That's going to, you know, really
clean everything up. Uh this one
and this one that may actually be the
worst looking one, but it's hid.
Uh, and I touched up over here a little
bit and a couple little spots down here.
So, this thing is so bad that I'm going
to end up having to clear coat
everything on the playfield. But, so
next up, we need to go back over the
black lines and ink these circles in to
make that look nice. Um,
let's see here. Lines there. Line up
there.
Uh, little bit of lines there. Lines
there. Lines there. Lines up there.
Lines up there. That one up there I
didn't touch.
All right. So, a little bit of black
ink.
[Music]
Heat.
[Music]
[Music]
Hey, heat. Hey, heat.
[Music]
Hey,
hey, hey.
[Music]
[Music]
[Music]
All right, folks. So, I have got the
orange on. I think I got all of it. It
dried pretty good in my opinion. I mean,
I think that's pretty freaking close.
And then I reinked the uh the little
circles around the lights. I just did it
by hand. You saw me doing the little 5X
over there. And yes, I know the X is
sand serif. I don't know. I think that's
just how it is. I don't know. I guess
the two isn't though. Whatever. It's our
happy little accident. Um and then this
over here I reinked. I think it came out
decent. Not completely done with it, but
I'll tell you what we're going to do.
I'm going to go ahead and put some clear
on just the parts that I've repainted.
Just the orange basically. Um because I
want to lock that in. I think I got this
really good. I think that's
I'm kind of surprised that it came out
that good to be honest. So, I'm going to
go ahead and clear that. Um the the
whenever you clear something, it's so
thin. Yeah, it's it's like certain
microns and stuff, but it's so thin your
eye cannot see the thickness of the
paint. So, like if you if I clear this
and then we go back and we paint red on
top of the clear, which we will, um,
you're not going to see like a depth
problem where the red looks higher than
the orange or anything. It's it's so
minor and minuscule, you can't tell.
Some of the really high-end guys um that
are really good at this that do very
professional ones whenever they repaint
like a little area on a playfield and
these are the more modern machines that
have artwork you know and they'll use an
airbrush and stuff. Whenever they
repaint something uh like uh you know
like an Adams family playfield or
something um they'll do it like that.
They'll do one color and then clear it
and then sand it and then do another
color and clear it and sand it. Another
color and clear it and sand it. After
you clear it, if you sand it, you can
get it flat and get rid of all your
brush strokes and all that. I usually
don't go that far because again, we've
got the problem where uh you know, we're
we're trying not to spend 50 hours doing
it even if I had the skill to do it. So,
I'm not going to worry about that or
that. But, I'm going to clear this.
I'm going to clear that one part. I just
said I'm not going to worry about it,
but I'm gonna clear those, that, and
that. And then I'm going to clear this.
And I'm going to go ahead and clear
that. It's not done, but I just want to
I got that five pretty good, so I want
to keep it. Um,
and the reason for that is, you know,
this is acrylic paint, so if you if I
touch it, um, it's going to darken it up
a little bit. You can actually just rub
it off. I mean, it's got to have
something over it because it's
water-based. So, uh, that'll show you
though how the colors differ after you
put clear on it. So, this is what it
looks like right now. I'm going to just
spray some rattle can clear on it. Uh,
satin finish. Um, I'm not going to do
the whole thing, just a few spots, and
then we'll look at it after it dries
here after a few minutes.
All right. So, that's with the clear
sprayed on. Now, the one of the problems
that I run into with the way I do it is
you can see brush strokes.
So you you can really what's going on is
you can see the light ref reflecting off
the brush strokes. So if you
like if you let the sheen hit it, the
light hit it, you can see where the
brush strokes are. The way you get rid
of that is you sand it like I was
talking about. So on yours, you may want
to do that. You don't have to sand. It's
not that you have to sand the orange
paint back down. It's once you clear it
now, it's thicker. And so you sand it
and you're you're basically getting rid
of you'll have thicker clear where the
where the valleys and the brush strokes
are. It'll just smooth it all out. And
because you you can't actually see the
actual brush stroke, you're just seeing
the light reflecting off the different
thickness of the paint. So if you spray
clear on it and then sand it and
sometimes you got to do it like six
times. Eventually you'll get it
perfectly flat and you won't see any
brush strokes.
Um I think it's pretty good. I'm happy
with it. Like I said, it's not going to
be a 10. So, there you go, folks. That's
so far. Next time, we'll do another
color and another color and another
color and we'll get it where it's all
in. So, we basically we got it all inked
in the, you know, the basics inked in.
We got the orange pretty much done. Um,
we've got the cream color pretty much
done. Needs a little bit of trim work. I
guess I could have done that one, too.
Um, so we got most of the cream done. We
still have the red, the yellow, the
burgundy, and the blue.
But that's not that bad. To be honest, I
thought the SST was going to come out a
lot worse than it did. I think it looks
really pretty good. All things
considered, it was completely missing.
You understand that, right? You remember
that, right? That was wasn't even there.
So, you know, I think pretty good. Let
me know what you think down below. If
you want to see another video of us
doing one of these repaints, uh we one
of the craziest ones we ever did was a
Stern Flight 2000. One of my favorite
games. Absolutely destroyed. So, check
this video out. But we'll see you back
here in a couple days uh with the next
installment of our supersonic here. Hope
you enjoyed it.