Somebody Dropped This Old Philco Radio! Repairing The Cabinet...

Amateur Repair Time
257 followers
49 Video Views·Apr 13, 2025
We're trying to keep some of the vintage electronics out of the landfill. Many times when something stops working, it can be repaired if someone will simply take the time to attempt to repair it. This channel documents our amateur attempts at repairing vintage electronics we think are cool.
We don't typically restore anything, we're just trying to get them working again. We've found that most of this stuff was well built and with a little help will start doing what it was intended to do.
Radio Repair
Phonograph Repair
Clock Repair
Projector Repair
ladies and gentlemen welcome back to
amateur repair time We have been working
on this
Filco
[Music]
41602 tube radio that we had a gentleman
send me and uh we've got it up and
running decently
Proclaiming victory in Jesus Christ 24
hours a day
Have to carry it around with him
continuing of education are right Um but
we need to mess with the cabinet a
little bit This cabinet is in really
rough shape This is a photograph radio
1941 Filco and this thing has just it's
been stored out in a shed for a long
time It's been banged up pretty bad You
can see that it's actually separating
from the cabinet a little bit in
places or separating from the side a
little bit in places So we're going to
see if there's anything we can do about
that Um and there is a bunch of veneer
coming off of it of the the plywood or
whatever it's made out of Um and we need
to work on the loop a little bit And we
just we got all kind of cosmetic stuff
that we need to do So I think we're
going to do that in this video and then
see if we can get this thing mounted
back in there So I think what I'll do is
this has the at the moment has the uh
wiring for the antenna soldered to this
loop antenna in the back of it which
makes it kind of hard to deal with So
what I'm going to do is go ahead and
unsolder that again Um and then that way
we can get to where we're just messing
with the cabinet And I'll turn it around
so you can see what the uh the rest of
it looks
like This is cracked
here A little loose there but like the
whole thing looks like it's been racked
Like
it Yeah So it's been dropped or
something It may have happened in
shipping The gentleman shipped it to me
Um but I don't know if it was like this
before or it it certainly wasn't in
great shape
before It's got that we probably won't
be able to fix that I'm not too
concerned about it
Um this is just a
uh she's old I do have the platter for
it We're going to try to get the
photograph working too But I think the
first thing I need to do is to try to
figure out what's going on with the
cabinet glue it and clamp it back
together And then we're going to have to
put new speaker grill cloth on
it clean this up a little bit Um maybe
repaint the black around the
trim you know Um but I my main thing is
I don't want any of this veneer to break
off and some of it's very close So I
want to mess with that first maybe So
maybe we do that and then we'll figure
out what we need to do to get the whole
thing square again So I believe I'm
going to take some some wood glue and
lightly place it behind the
veneer and then clamp it in place and
let that glue dry and try to do it in
such a way that I won't
um glue my clamp to the veneer
So I guess I'm just going to do a few
pieces at a time Um and
just you know each piece will make it a
little better Let me show you the other
side of it This side is actually better
but it does have a piece
missing
Um that's all the veneer is better
though The piece missing here too So
Craig whenever he sent it to
me sent me some
pieces So we've got some little blocks
that go
inside Um let's see if there's any
veneer pieces in here that we can figure
out where to
go This is all extra stuff folks This is
all
extra That's another block inside
This is one of the screws that holds the
trim plate on I found when I took the
trim plate off it was missing one screw
and it's in the bag So we got both of
them
Um this is just something
inside This I think is the needle cup I
think that goes right here on the inside
And it's where you put
the used needles I
believe I mean that's definitely where
it goes I'm just not sure what it's for
More
blocks
Um and this I'm not sure if that goes
with it or not but maybe we'll find
where she goes All right Yeah So no
pieces of veneer though All right All
right Well that's all right We'll just
stain it or something But you can
see where a lot of this is coming loose
The ply It's I'm calling it veneer It's
not really veneer I think it's just Well
I don't know I was going to say I think
it's just plywood but it it is a it has
a pattern to it So I guess it's a veneer
All right So um yeah let me get some
glue and see if I can start putting some
of that together on that one side so
that it doesn't chip off and get even
worse Okay So the front doesn't fit
right And it's because someone has glued
it back together This side back together
off So I just broke it apart And I'm
going to try to line it up more straight
so we can get the front on it straight
This side is fine So originally it was
nice and square and flush but at some
point the whole side of this has been
broken off So it was glued but I now
have separated it where the bottom is
loose on this side I can line it back up
square and put some clamps on it and uh
get some glue in it All right You might
not be able to tell much difference but
I clamped it overnight and it's nice and
solid now where it's held together good
and it's not nothing's loose anymore
I've got it lined up pretty square
Um it's just you know somebody has
smashed the crap out of it at some
point Um so I'm going to turn it around
so we can look in the I want to get the
speaker grill pieces out I don't even
know if those are original but I think
they are I want to get those out And um
I want to clean out the inside of it So
I'm going to lean it up where this is
down And I'm just going to pour glue all
over these wires so that it holds this
in place It's part of this This is like
a tape almost that they make And it's
got these wires wrapped around in a loop
And there's
about 10 or 12 of them across there But
we had to on the previous video we had
to take some of them loose because they
had broken They put staples through it I
just What are you thinking and had
broken the wires so the antenna didn't
work Well I was able to solder them back
together but this piece is broken loose
It was like that when I got it And this
one's not much better So I want to just
pour glue like an
epoxy on here and here just so it
puddles up and holds it in place That's
my idea at least So I'm going to do that
but I want to wipe all this out There's
just dirt
and even mold in here And then on the
side here you can see where there were
blocks to hold it together
Um and yeah there's still some on this
side So there's three of them I don't
know if you can see it but there's one
two three blocks down through there
There's some on the top as well
Three
Um over here you can see where they're
missing So that's what these extra
blocks are There's
one one missing there in the front up
there So that's all of these
So three go on one
side
Uh three go on the
top and one goes on the
front We should be able to even tell
where this one
was Okay And then this little
thing goes up there Kind of a weird way
to build it cuz any kind of pressure on
it would make it break loose like it did
But that glues back
there Um still don't know about
this That may not actually go to this
And that would be all of the wood pieces
that I have So if I get all those glued
back in place
um that will be that Oh yeah This
one goes right there All right So I'm
going to wipe all this down first clean
it up and then we'll glue these back in
place and we'll do the glue for that All
right There's my big glob of glue We'll
see how that works I think it'll be all
right And I've glued the little block
back in I can't do the other ones yet
because they're up there
Um I pulled out the speaker grill cloths
Now this one was nailed in with little
tiny tacks And this is the one that's in
front of the
speaker So it
had Let me see if I can find it
here I had a good one for an
example somewhere
There it
is It was stapled in with
those So I think that's original And if
you think it was if you think about it
that was in front of the
[Music]
speaker H I guess the other one though
would have been in front of the radio
too But uh so yeah little
tiny staples holding it in
Also it's cut kind of you know in a
pattern So I think this is
original There's a number on
it which might even line up with some of
Filco's part numbers Okay So that one is
probably original which means that this
covering is probably original And it had
this kind of stuck under it
as well as
this So I think it probably was a kind
of thicker
almost you know cotton or a wool
looking You can see the lines in
it Um and those were
sideways like this is the where the dial
is I believe
Um so from side to side you have
these So I think that's the small little
example that we have of the
original speaker
cover So then the other side had this
Well this was stapled in with regular
size staples or what I would call
regular size staples which I guess
they're more like what do they call
those a15 or A10 something like that And
it has this on it Now to me that doesn't
look anything like what this must have
been because you can just see from the
size of those fibers there or that that
weave there and then see the white
white white white
white There's nothing like that in this
So I think this is
completely remade by somebody and they
didn't even do all that great of a job
because it's kind of
crooked So I think they just kind of
threw it
together And on the back of it although
it is a piece of cardboard you don't see
a part number stamped on it or anything
I think this is literally just a piece
of cardboard off of a box or something
and then they glued some fabric to it
and then stapled it in the hole probably
whenever the thing got busted
up
Um so that's what we're working with So
I've got some speaker grill cloth um
that I used on a
amplifier Um but it's more of like a
it's like a um like a nylon thing It's
not old school like that But let me look
at it and see if it's usable
There's a whole bunch of it I just
wrapped it around it So this is was for
a guitar amplifier I think it's a
knockoff of like the Fender
um
design And this is what would have been
original I don't know I
mean the color is actually the same and
it had white
lines It's not too far off I don't think
Uh let let's look at those pictures
again that we saw of it originally
Um and see if we can tell anything by
the pictures So it's brown It pretty
much matches the cabinet and it's got
kind of cream colored horizontal lines
that I guess couldn't be vertical Um I
saw a picture of one that was restored
but in my opinion they had some really
crappy looking speaker covers on it So I
think this would look nicer Plus I got
this already And what what in the world
else am I going to do with it i got a
ton of it So I'm probably going to use
this but I want to look at the the uh
pictures online just to make sure that
it's not crazy way off Here in my office
I've got a few radios too This is an
Atwater
Kent And uh that's a the speaker cloth
on it is a really tight kind of knit
design
Um this is a post-war
um sure looks like a Filco Is that a
Filco yes that's a Filco And so but this
is
postwar and it's a
little you see they've got the the
silver in there and it's a little
looser knit but you don't see any big
threads or
anything This is a kind of weird oneoff
Well I don't know about oneoff but this
is a Kennedy
Um and it
uh you know that's fairly similar to my
Fender guitar amp stuff I don't think it
would look too out of place in something
like
that
Um this is just typical stuff And these
are all I think most of these are
obviously original This is that silver
tone that we restored
It's actually fairly similar as far as
composition to that guitar
amp
stuff I mean that's not too far
off And this is our
Majestic This is a earlier than the um
this is from the 30s This is earlier
than the Filco And it's just got like a
little pattern on
there So that that guitar amp stuff I
don't think would be out of place I
think it would look pretty good
actually Um I've got
a Zenith up here with just a little bit
visible I think this is an
RCA Yeah that's an
RCA See how you can see where the
speaker is too
That's pretty
common And then we've got this one over
here which is a
cordonado Coronado A
Coronado And it looks like it's just
it's got a couple bars missing They're
plastic bars that go over there Um it
was just kind of like a plain linen look
almost
Okay So this is on
filcoradio.com And I was thinking that
that's kind of like aftermarket
[Music]
um speaker cover but if you look at
this this is an advertisement an old you
know advertisement of course from the
time that it came out that's on the
radio museum radio museum.org And if you
look very closely at that
speaker
grill that does look very similar to
that That's probably the correct
material So that may have been replaced
or that's just a pretty clean one
There's a bunch of damage to the cabinet
and stuff So you know you wouldn't think
that would be so clean but maybe they
just put the ex maybe they searched out
and found the exact stuff and put the
the original type in there It does look
very similar to this ad Um I also found
[Music]
though I had another picture here Oh
yeah I was on the same one So if we look
through at some of the other
pictures that's the ad
there This particular one someone has
replaced it and has used something
similar to what I'm using
To be honest I like this look better
than I like that look And I already have
this stuff so it saves me money if I put
it this way So maybe that's why I like
that look I don't know
Um but uh I think I'm going to roll with
it This is This may even be the same
stuff that I'm trying to put in there It
looks very similar
Um
so that's my opinion So I think we'll
roll with it But I think it'll look
really
good Uh so I basically need to glue or
staple it to
the some cardboard and attach it back in
the cabinet Okay So I've got the uh
cloth stapled in there I used the
stapler Actually I've got a ton of
staples
Um I think it looks pretty good It's not
perfectly straight some of it It's just
slightly off but I think it's fine It
looks a lot better than it did Now this
one looks lighter because the speaker is
not behind it This one I used that piece
of cardboard behind it So um got it as
straight as I could and I think that
really helps the look of it just that
alone Now the cabinet I still got glue
drying everywhere and little pieces of
wood glued on and everything It's not
going to turn out perfect but um it's
just this thing has been abused you know
I'm thinking maybe I should paint this I
don't know that how much I guess I could
uh do it at work or something but I need
to paint that brown tone in just to make
it look a little better I don't have the
veneer to like piece in there And this
this whole side over here has a strip
actually missing all the way down that's
broken off This thing's taking a really
hard fall at some point cuz there's
problems in on every corner of it where
it's all screwed up ply is coming apart
on this back
piece and this hinge The reason that the
front doesn't
sit square is because this hinge is fine
But you could see how it's not keyed in
perfectly Um that's that may have been
how it originally was but this hinge is
is fine But this one's bent where they
dropped it So it starts bending about
right here and bends out Some of the
wood like one or two of the plies is
missing inside this piece So it kind of
puts a strain on the hinge So I I might
just take that off and see if I can bend
it back straight and then put it back
And then uh maybe that will push that
forward just a little bit to get the
front more more
even So you can see how just bent just
barely We need to get that flat
All right So that one's nice and flat
how it ought to be But this one it's
just there's a ply missing I got it
straight And I actually turned it around
because it doesn't really matter but
they had it on opposite So you see the
little three things They probably was
like that from the factory but because
it you know it's not really important
but I did it anyway I'm just trying to
get it where it would get it more square
And it did pull it in a little bit but
the whole top is just slightly
twisted But you know what can you do at
least we got this hinge
flat That doesn't quite close
square Um but I think it's just as good
as it's going to get I'm going to
[Music]
um put the uh restore finish stuff on it
but I'm I'm going to have to paint some
of this and I'm going to have to paint
the black back I think that'll make it
look a heck of a lot better once we do
that and we'll get a
nice even sheen on it We'll make it look
good too So I think we're I think we're
getting there I'm kind of anxious to see
how the dial light works I would I would
love for that light to light up really
well but I have yet to have a radio that
the light works very well on Um but I
think we are ready to pretty much put
the
um we we're going to work on the
phonograph but I want to go ahead and
put the chassis back in and make sure
that it works
Um so let me I've got to do a little bit
more wiring on that And I'm going to add
in that across the line cap that we
didn't do last time to see if it changes
the uh the u interference that we were
getting
Um another thing that um if you watch
the first
video when we took it apart there was
actually an extra resistor or a little
choke or coil if I can find what I did
with it across the antenna
And but I think that may have been
because the
antenna Well I had to find what I did
with it The antenna wasn't
um um working because they had it broke
So whenever we fix the antenna I didn't
put that little choke back on
it But whenever I find it maybe we we'll
try that We can do that externally
though That'll be easy to do Okay So I'm
going to um I'm going to clean up the
pins on the lockville tubes so that we
can go ahead and mount the thing in
there and leave it alone I'm going to
put that across the line cap back on it
that's in the schematics um right there
near the switch Uh and I'm going to
extend the wires out of the back that
are used to run the phongraph uh uh
motor Um there's a switch on there and
all that we got to mess with but I'm
going to put disconnects on that so that
the chassis can be removed without
having to cut the wires So I'll turn it
around and and show you what I'm messing
with All right So I've got it back in
there I put two
new wires on the AC inside So one of
them is switched It's this one And one
of them goes to the neutral It's this
one Um and I'm going to put a little
Molex connector on here so that this can
be easily removed in the future that had
it
um spliced in where you couldn't really
remove it without cutting it So I'm
gonna put a Molex connector on
this And
then one of the wires
is this one which runs to the
motor of the
phonograph And then the other wire is
this one which runs to a switch over
here that works when you pick up the uh
tone arm It actually connects the switch
and provides power to the to the uh the
phonograph motor This is a you know it's
1941 so it's an early
electric photograph So it's pretty cool
And then when I do that with the molex
I'm also going to cut these and put a
molex so that the antenna can be removed
easily Um my glue is almost dry over
here Um but that's all nice and solid
Now it's still drying though because I
poured it on so thick Like a epoxy
probably would have worked better but I
just had uh wood glue So I poured wood
glue on
it Um and the power cord is good of
course So um let me turn it around We'll
see what what it looks like And then
we're going to do some more work I got
some wood putty that we're going to put
on it and work on the finish a little
bit
It lights up pretty decent Okay You know
um
[Music]
around 6,500 ft above sea level the site
which for years been hailed by some as
the final resting place of the ark
itself All right Could soon be at the
center of a
So um the worst part of the physical
damage to the veneer is right here on
the front This piece I glued back in and
there's a tongue in
there Um but the the front piece of this
is broken off So there was another piece
of wood like you're looking at it
here So if you look it's a little bit
crooked
This piece is this piece and this piece
is missing It's been broken off So it
looks like it's not put together all the
way but it is It's just that piece is
missing So what I'm going to do is I've
got some wood putty I'm going to try to
fill that in and make it look a little
better which may or may not work out
right And if you look over here you can
see that most of it's there but there's
a little bit of
a there's a little bit of an issue but
it's I'm not going to put putty on that
Um and then we're going to try to color
that make it look a little better So
basically I'm just trying to get rid of
this line
here See if I can make that look better
And I think that would really make the
entire radio look nicer And then if we
can darken up this and that I think it'd
be pretty presentable Then we'll put
restore a finish on the the actual uh
veneer and it should look pretty good So
let me see if I can do anything with
[Music]
this Pretty
cool So
um I used some wood putty on it I used
plastic
wood This stuff works pretty good You
can kind of smooth it out before for
what my purpose You can kind of smooth
it out and then you don't even have to
sand it um while it's drying Then let it
dry and then it'll take
stain So I think that made that look a
lot better Obviously it still doesn't
look
perfect Uh where the veneer was gone
what I used was
some markers with varying levels of
success
So I've got
maple gray cherry walnut mahogany and
black I would have said that that
was maple I mean not maple um
walnut but there's a dark walnut and a
light walnut This is kind of like the
light walnut I think Um that wasn't even
close It was way too dark
Um so what what matched it the closest
was the maple
actually Some of it even blended
in It's like that whole corner obviously
has been redone but from a
distance you can't even hardly make it
out So I think it cleaned up really good
I didn't do anything to this Oh and then
the the last thing I did was I did the
Restora finish I need to get like every
color of this that they make So I went
with walnut just because it was the
lightest I had And you know their their
representation of walnut in my opinion
looks pretty close to what we've got But
you know I'm not a expert on this Um but
that res this restoer finish is the best
stuff ever They need to just send me
money so I can keep telling people how
cool this stuff is but they did not send
me money this
time right um I don't know that they
sponsor people but Howard Restore a
Finish is one of the coolest products
I've ever seen It's got a little bit of
stain in it obviously Um and then it's
got just some oils and stuff in it That
crap you put it on there as soon as you
put it on there it makes everything look
better Um and I guess there maybe just
some wood conditioner in it too because
it just makes
everything nice you know if you saw Well
you can see it from here That silver
tone I did the same thing for Christmas
And I I know I got this all off That's
not even close I was trying different
colors Maybe we'll mess with it here in
a minute Um the silver tone there See
the sheen reflecting off of the light i
I did I used the same Restora finish
It's actually I use map u walnut on that
as
well That stuff is great And at last I
did this one well over a year
ago You might have remembered that video
that we did That thing was
destroyed It looked horrible I can't
remember what color I used on it Maybe
mahogany or something Maybe that one was
mahogany I can't remember Well
anyway it's got a little bit of stain in
Oh I also did that one like that that
radio The stuff's permanent because it's
a stain So you put it on there it just
stays like that So this will look just
like this 5 years from
now you know And again it's not perfect
but So let me let me see if I can darken
that up just a little bit with one of
these
markers That's a lot better So I use
some more of the
maple All right So I think we're going
to do one more video on this because I
want to try to get the photograph to
work
[Music]
This is a religious channel but it's
pretty good music I mean it's it's it's
it's it fits the time It seems like
how do
I used to be a cemetery on site
kind of
like on my chest A little whistle sound
comes out when I breathe But while your
child may suffer from asthma asthma
doesn't have to make your child suffer
There are simple ways you can
[Music]
We'll get a copyright strike for that
one for sure We'll go back
uh back uh we'll do it again
later All right So yeah I want to work
on the uh the turntable I think that the
the cartridge is definitely going to be
bad Uh we haven't even touched the motor
yet and we don't know if the switch
works And then I'm going to try to
repair the
cartridge And then it's probably going
to need like a preamp or something when
I do that which I may or may not do I
don't know We'll figure all that out
later but that'll be on another video I
hope you liked it so far Oh let me show
you the top I hope you liked it so far I
just did this earlier So the top
hopefully she looks
good Pretty good I don't know Looks like
I
didn't absolutely beautiful I'm sure
when it dries it'll look even better So
there you go folks I hope you've enjoyed
it
We'll see you on the next one Now if you
uh enjoy watching us work through these
old radios I don't really know what I'm
doing but I like working on them I'm
learning as I go Uh we did a whole
series on this one Check it out We'll
see you on the next one
