843. Adding Coils to the Square Ikebana Vessel to Create the Sharp Corners with Hsin-Chuen Lin 林新春

Hsinchuen Lin
205 followers
13 Video Views·Mar 14, 2025
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
e
[Music]
[Music]
[Music]
I threw this the other day and I weighed
a couple day because the weather is so
wet and uh now this little bit firmer um
that's when you could uh use the pedal
to hit it to change the shade the over
the
Shadee not too not too wet but not to
dry either if you hit it too dry it will
have a crack so you have to control the
the right uh dryness to be able
to hit it use the pel to hit it to alter
the shape
and here I am going to make a very
squarish more angle here for this vessel
but since this was made from a circular
ship so when I'm stretching it wasn't
have I don't have enough clay here to
get a very good corner
here what I'm going to do is add a coil
here and then I'm so that I have more
clay in the corner and when I'm using
the shoam to shave it
I will have a nice sharp corner here if
I keep on doing here this part here will
be too thin so usually U I will add
patch add a COO there to uh to little
bit of a clay in the corner so I'm
getting the same clay and
then make a
coil here I need to have more clay and
come to here I could have a little bit
less clay here but here very sharp
corner so I need to add more more clay
here on the top
[Music]
portion it's even better to use the slip
but I don't have slip so I just add
water to the surface
[Music]
[Music]
all right so I will let this sit uh a
while that the the dryness even out cuz
this one the coil I just add is slightly
softer and the body slightly harder so I
will wait until they even out and then I
will put the pressure here to smooth it
[Music]
[Music]
[Music]
[Music]
all right so add a little bit of coil
here so that the the corner looks
sharper and now I'm going to use just
the rip to
roughly smooth out the
joint and later I will use the uh the sh
foam to shave mle
[Music]
[Music]
[Music]
all right so adding Four Corners to this
vessel now I'm going to flip it over to
show you what the button look like okay
so the button look like this and again
I'm going to use the padal to P the
button in so I will have a 4
ft and just like I show you on my tripod
I will shave a little bit clay here
before I do that I like to know where is
my foot
so this part here I have a little bit
more clay so I will shave up a little
bit before I push it in
[Music]
[Music]
[Music]
[Applause]
and as you can see that when I'm trying
to use my finger to push this part here
is feel like it's dropping down so that
means when I'm throwing that I didn't
leave my bottom fairly thick I leave it
about normal thickness around maybe like
half a inch to 3/4 of inch and let me
show you what the inside look
like so this is what the inside look
like so this is the uh the process of
adding the corners and then
uh the show form to to the hand triming
but now I will just leave it alone until
the uh this corner f up a bit more and
the wall dry a little bit more then it
should be easy to use the shoam to do
that you don't want to do that uh when
server is too wet the clay is going to
stick on here easily
[Music]
[Music]
