Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is joe's
classic video games back with another
cool
video for you this evening this
afternoon
we're going through a hurricane outside
but we're going to be all right
we're working on this bali eight ball
pinball machine
and i figured i would shoot a little
video of this because it's got a major
issue
check out that play field
it is worn all too heck all the way down
to the wood
now the top part of the play field all
looks really good
we've cleaned this all up and got it uh
looking pretty good
got a couple of issues like we need to
replace that uh the decal on the spinner
things like that but the worst part is
down all it is wear above the flippers
look at that
that's not good and so it is literally
because they didn't wax it enough i
guess it is literally worn all the way
down
to the bare wood
to where the 11 ball is completely
missing
so they don't make an overlay for this
so we got a choice we can either
throw the game in the trash or i can try
to repaint
the paint that's missing on the play
field now i am not a great artist
but i'm going to see what i can do
to fix that up so this is kind of the
before video
and we're going to see what we can do so
the first thing that
i'm going to do i'm just trying to get a
good
documentation of the shape it was in oh
by the way if you guys
watch all of our videos this is the
machine that came from
tennessee where we bought that whole
truckload of games and one of them was
this pinball machine was with it and if
you remember from that video
it had the wrong back glass it had this
back glass
they had put an eight ball deluxe back
glass in it even though it was an eight
ball
so we took the eight ball deluxe back
glass off hung it on the wall
maybe we'll get one in and we purchased
this
eight ball back glass to fix it up
but then the next thing is the play
field is worn all too heck so
we're going to
try to repaint it it's pretty tough but
we'll see what we can do now the first
thing i'll do is i'll try to draw
everything back in
and then i'll try to paint paint my
numbers basically
and just do the best that i can the
proper way to do it is to
clear it and then paint it and then
clear it again and sand it and clear it
and sand it and paint it and sand it
but i can't really do all of that one
because i can't spend all that much time
on it
i mean i can spend some time on it but i
can't
put the 30 or 40 hours of work it might
take getting that playfield to look
perfect
um on it and uh also i just don't have
the skill level to do all that
and then another thing we're i'm going
to do it right here in our front room of
our showroom so
i don't want to get sanding dust and
stuff all over it so
this is not going to be an expert
restoration so if you're looking to see
this be perfect and
look like factory you are watching the
wrong video believe me
but we're going to try to make it a
little more presentable where it just
doesn't look
god-awful like it does now sometimes if
you've just got a little bit of wear you
can just leave it
because it's not big enough that it's
going to completely detract from the
game
but whenever it's something like this
where you've got a huge area of the
of the art missing you pretty much have
to do something so the first thing i'm
going to do is i'm going to try to draw
back in
uh the missing parts and just get the
lines back on there just so i have a
guide
for the paint so i will be back when we
get that straightened out
all right so we're back the first thing
i did was
i'm trying to draw in what's missing so
i outlined the pool balls and put them
back in with just a pin
and what i did was i took this roll of
electrical tape that i had
and i took the tape off and took even
some of the cardboard off to get it
where it was the right size so this
is basically a template that's the same
size as the pool ball and then i just
put it on the ones that were still part
there
and used it to draw in the part that was
missing which was all of them except
this middle one so then whenever i had
all the other ones done
i just put the middle one in and made it
happen so
you can see after you do that it makes
it a lot easier because you can kind of
tell
where you need to paint and what's
missing all of that so the next thing
i'm going to do is i'm going to
get something that's got this curve on
it or something similar to it
and then i'm going to add back in all of
the stripes on the ones that are
not solid which unfortunately is
most of these but so we'll do that
and once we get it a little bit better
we'll uh we'll start with the paint
okay so i found another roll of
electrical tape
that kind of approximated these um
arcs you know the arches on the uh
pool balls and so i used them to draw
the stripes back in and again this isn't
going to be
perfect we're just trying to get it much
more presentable than it is if somebody
was doing it right you'd have somebody
who's an artist
i'm not you'd have somebody who's an
artist that would you know lay it out
perfectly
and then i would airbrush it and make it
look a lot better but we're stuck with
little old me so
i'll be back in a minute and we're i
think we're about ready to start
painting some stuff
all right folks so we're about halfway
through it
so basically what i did was i'm i took
i've got a whole box full of
paints i mix them together as such
and then i uh paint in the colors so the
first one i did was the black because it
was easy didn't have to mix it
and then i did this kind of maroon thing
which is the 15 and the seven
these two were still fine so it shows
you it's pretty pretty damn close
and then after that i did the blue which
is the two and the ten now
i'll show you the two has
see right around the middle it's pretty
damn close match
you can't hardly tell but since i got
close to it you could
um and of course the tin i repainted all
of that blue
and so then i did the orange um which
anytime you do like a yellow or an
orange it's hard to get it to look very
good because it
is i'm brushing it on so you see all the
little brush strokes and stuff but
i still have a lot of cleanup work to do
and to put in the black lines and all
that
and all the white and all the green and
so after i did that i did this
uh kind of purplish color that's here
as you can see this is a little bit
different because this one
is stipulated it's like a almost like a
newsprint
i don't remember what they call that
but it's not a solid color so i just
mixed a solid color that was as close to
it as possible
and then the same thing with the orange
which i'm now working on as you can see
it's pretty rough whenever you're about
halfway through
but we're getting there and then after
that i've got to do the white
and the green now on the white the deal
with that is
it's not really white it looks white but
it's really yellow
so you need to almost get a uh
like a yellowish color it's a real
off-white
and all the pinballs are like that like
you can kind of see it on these pop
bumper caps see how the poplar caps are
white
and the over here on the left where the
arrows are it's yellow
so it just kind of shows you so we've
got the same thing going on down here
this looks white but it's not really
you don't really need it to be white so
we'll be back in a minute
okay we're a little farther along now as
you can see we got all the white done
um i guess i should have showed you some
of the paint but basically what we're
doing is we're taking
uh some of these acrylic paints that you
can get at michaels and stuff
and uh pouring a little bit of the paint
into the top and then
mixing it you know to get the the
perfect color
or not perfect but closer than uh than
it was so for instance like this
burgundy one i put a little bit of
purple
and i put a little bit of red
right and then i used a little bit of
black
and by mixing the three i was able to
get that color
so you just kind of keep messing with it
messing with it and messing with it
and so once you get that once you paint
it in and
you know if i would have done it in a
different order it probably would have
made more sense like it might have been
smarter to do the green first right
because now i got to go through all
these little lines
but i kind of just wanted to do the
green last uh just so in my mind
i could think of all i have left is a
green but um that probably would have
been smarter to just do it
first but what i always end up doing is
going back and doing it two or three
times so what i did for instance on this
15 ball
i painted in the purple we'll call it
and then i painted in the white and then
after i painted in the white there was a
little bit
where the white went a little bit too
far on the purple so i went back with
the same purple that i had mixed that i
had
sitting to the side and touched it up
again just a little bit
and then i used a black uh acrylic
paint marker
water based just like the the paint that
i'm using
i use this to go in and redo the line so
as you can see i mean it's
like like i was saying it's not going to
be perfect
but it's starting to look pretty
presentable compared to what we started
with
so i'm happy with it
so the reason that i'm using uh acrylic
is because you can clean it off if you
make a mistake you can
take it off and redo it and because
like i'm using the acrylic paint pen
instead of a uh
like a sharpie or something like that
because i'm going to clear coat this i'm
going to put some
clear over it and whatever i do
sometimes with a sharpie or that kind of
a
paint or ink whenever you clear it the
catalyst and the clear coat will make it
run and it really messes you up so i'm
just trying to use acrylic paints on
everything
and then once i get it all how i like it
i'll uh
i'll paint i'll clear coat it and i'll
spot clear coat it so i'm just going to
clear coat maybe
down to here and up through here just
kind of this general area
the ideal thing to do if i didn't have
this and this way over here that i might
touch up
if it was just the rack what i would do
is just very carefully kind of try to
clear coat just the rack because the
problem you run into is after you clear
something
it'll have a little bit of a sheen
difference where this will be a little
dull
and this will be a little shiny or vice
versa so you can kind of tell that
something's been done
so ideally you wouldn't do that now
again like i said at the beginning of
the video
this is not the perfect way to do this
if i had more talent and more time
you know there's a million ways to do
this much better i'm just showing you a
quick and dirty way that
with a few hours you can fix uh uh
problems now to your average person
it already is starting to look pretty
damn good i mean it's not
again it's not perfect and you can tell
that stuff's been messed with
but it looks a hell of a lot better than
it did you got to admit that
so we're just trying to get it
presentable for someone
who may not be a collector but just
wants a nice clean machine
so we'll be back in just a few uh i've
got to
keep working through it and we'll do
another update here in a minute
all right folks we're still working it
this is what we've mixed up
i say we it's really me that's what
we've mixed up notice how it looks a
little bit lighter than the play field
that's because this stuff dries a little
bit darker
so that's what we've mixed and the way i
did it was uh
we took let's see here
i took some green
that was pretty close but it was a
little too bright
and uh it looked to me like it needed a
little blue right
so i used
i used this blue which was a little
duller
like so sometimes the problem you get is
that
the the paint you end up with is too
bright like it's too vivid
so the color might be about right but
it's just too too vivid so you can
they call it knocking it down you can
knock it down by putting something a
little more dull
or the opposite color we'll knock it
down a little bit too
but we needed to go a little more blue
so i put a little bit of this kind of
dull looking blue in it
and i messed with that a little bit and
i uh
i ended up where it wasn't blue enough
so i started putting in
like a dark blue which got it where it
looked like the color was about right
but it was a little bit too bright i
mean a little bit too
a little bit too dark so i used like a
light green
to kind of lighten it up again so we
mixed four different paints
and
got it mixed up now while i've been
saying that you've been watching this
part have you noticed where i test
painted it on the play field to see if
it matched
check this out
see where i pieced it in there a little
bit
and then i let it dry so i mean that's
not perfect
but it ain't bad it's pretty close so
this part right here
has been repainted so that's good enough
for me now it's
once it's out here you'll see it more
and another thing that when
if you're doing this that you have to
worry about is if you look this isn't
actually all one color if you see there
the
see the difference in the green there
just from the wear
so if i paint this the same color as the
worn area
it won't look quite right and if i paint
it the same color as like a fresh area
it won't look quite right so
you can't get it perfect but again we're
not trying to get it perfect we're just
trying to get it to look pretty good so
i'll paint in some of this green
and then i'll be back in a minute all
right so we finished it up and that's
how we uh
that's where we are with it check it out
what do you think
maybe mention in the comments below if
you think we're hacks
or if you think we did all right by this
old game it uh if you rewind to the
beginning of the video you can see how
the
how it looked and how it looks now but i
think
i think that looks a hell of a lot
better night and day
if you get close you can see all the
imperfections
let's check that out that's where i
repainted the green
i mean
i don't know folks i'm pretty proud of
this one i think it came out pretty good
again not perfect but
that's about all we're capable of and if
all you can do
is all you can do well then that's
enough right
so there you go i hope you enjoyed the
video we'll film another video this
whenever we get it all finished up
as well as this uh star trek i bet some
of you are wondering about next to it
and this dungeons and dragons that's
gonna be one hell of a video whenever we
do it because
this thing uh we bought it at an auction
and it caught on fire
so that'll be a fun one but we'll film
another video of this eight ball too
whenever we get it finished up which
will be here in the next few days
um whenever we get finished up we'll
film a little video of it
and if you like these kinds of videos
just subscribe to us here
on youtube every time we uh shoot
something like this it'll send you a
little email letting you know about it
or if you're uh if you're looking for an
arcade game or a pinball machine to buy
we have a
we have a showroom in downtown rock hill
south carolina that's about 15 minutes
south of charlotte north carolina
full of games and we're always working
on stuff like this you can also check
out everything that we have available
for sale right now on our website at
lionsarcade.com
and we will see you on the next video
comment below and let us know what you
think about
my my hack paint job here so see you on
the next video