Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool arcade game video for you today in
this video we are going to show you how
to repair a arcade game bezel which is
the piece that goes around the monitor
or a pinball back glass that has started
to
delaminate so basically the way they
create these bezels this is off of them
Miss Pac-Man obviously the most famous
game in the world and we're working on
one and uh the bezel has a couple little
issues but it's pretty minor on this one
so we thought it would be a good one to
show you how to go from zero to hero
with your bezels so this one uh the way
they create the bezels this is glass
which is where you usually have the
problem uh they silk screen the art onto
the back of it in various layers so they
do one color first and another color
just like you silk screen things and uh
this is one of the coolest parts of the
game of course is the the glass artwork
around the monitor well over the over
the years the way these are stored a lot
of times is they'll put them in storage
and it'll get uh it'll go through the
seasons so uh the glass on the game will
get cold and hot cold and hot and
whenever it does that it makes the glass
actually stretch a little bit and shrink
a little bit and since the uh artwork is
silk screen to the back of it or
laminated to the back of it sometimes
that will make some of the art start to
peel away from the glass which is
disastrous because uh it'll fall it'll
just completely fall off the glass so if
you've got one that's done that and it's
not too bad and and you catch it before
it uh gets really bad sometimes you can
repair it so we've got this one that's
doing it over here and it's doing it
over here now if you look at it closely
whenever the light hits
it you can you can see that it's peeling
I'll show you the back here in a minute
but uh I'm trying to show you the
uh okay yeah see that right there you
can see how it's trying to do it right
there like this part is where it's still
connected well but the light is showing
off this part where it's starting to
Bubble Up off of the back just a little
bit and of course over here it's done it
much worse so that's what it starts
doing and this is what it ends up doing
so I'll turn it over and uh show you the
back so you can see what's going on all
right so here's the back here's the main
part that was doing it as you can see
it's almost just it's like it's peeling
right off of the
glass so it's no longer attached to the
glass and we've already lost a chunk has
fallen off into the game you can see up
above it
here little pieces where it's starting
to Splinter a little bit and that's
going to do the same thing
there and then right there it's peeling
up just a little bit so you got a little
bit
there and then over
here a little bit as well so you can see
from the back like the layers that they
silk screened on and then they put this
kind of white mask layer over everything
so these are really easy to do because
they don't uh they're not back lit so
you can seal that up and then paint it
and it'll look good because you don't
have to shine a light through it on a
pinball back glass it's much harder
because uh whenever it's silk screen so
perfectly like that the light shines
through it evenly but when if you go in
and start painting part of it the light
won't shine through that is good so it
it looks really splotchy and weird on a
back glass you can still do it
especially if it's the only U
alternative you've got and you've got a
glass that's doing this but on a bezel
like this it works much easier and on
this one it really is going to be easy
because it's only one color so if you
look all that's doing it is the
blue and down here so I'm not an expert
on this so whenever I'm done it's not
going to look brand new or anything
but it'll look a lot more presentable so
what we're going to do is we're going to
use triple thick on this so we're going
to spray this and basically we need this
to stick back laminate back to the glass
so we're going to basically glue it to
the glass with triple thick uh Pottery
glaze um which you can get at Michael's
any kind of uh hobby shop um and we're
going to get that to lay back down flat
with a little trick with some Samaran
wrap and then after that's done we're
going to want to paint it so the first
thing I've got to do is uh spray it so
I'm going to move this into the back
room and we'll spray it and we'll film
that and I'll show you how that works
all right folks I've put this in the
back room I've just got it laying on a
trash can and I've got some uh cardboard
covering up the uh here let me zoom out
so you can
see I've got some cardboard covering up
the uh open area on these you don't have
to be too exact because like I said the
light doesn't shine through it on a
pinball back glass sometimes you want to
do the whole back glass just to keep it
uh where in case nothing happens in the
future but this one since there's just a
couple little spots we're just going to
spot do it so we've got the cardboard
covering everything that we don't want
to get any kind of overspray on um and
this is the you know the worst part
where it's starting to lift up so what
we're going to do is we're going to
use kryon triple
thick look for the stuff that says 0500
that's the good stuff so you can get
this all over the place Michaels has it
on the Shelf
um but this is for pottery it's just
basically to give it that real thick uh
glazed look but the reason it works good
for this is because it's clear and it's
thick so it's almost like a clear glue
that we're going to put on it and uh you
just want to spray it on and uh in kind
of thin layers we're going to spray it
on a little heavy and then I'm going to
uh push the art back down into place now
it's also going to be all over this part
that we're going to that we're going to
paint which isn't that big of a deal
because again it's going to dry clear so
we're going to do that and then I've
just got some Saran Wrap here that I'm
going to use to uh push down on it now
once you do that you kind of need
something that you can lay on it to keep
it flat so that you hold the paint down
and the reason that we're using the
Saran Wrap is so that you can push on it
and not get the stuff all over your
hands because if I spray on that and
then I press on it to push it down and
then pull my finger up it's going to rip
the art back off of it so I'm going to
find something that we can lay on it
that's heavy let me
think I don't see anything flat laying
around I think uh maybe Nintendo games
would work perfect let me go grab a
couple of those be right back all right
so we have a video game store so we've
got some Nintendo 64 games which are a
little heavy and they're flat so we're
going to use that to hold the Saran Wrap
down which is basically going to hold
the the uh silk screen back in place so
here we
go shake your
Yoo probably should have done that
before I started filming
all right so we're going to another
thing you have to worry about is if you
get too close to it and that stuff's
real loose you can actually the the the
compressed air will actually blow the
art off of your bezels you don't you
want to try not to do that if you can
help it so start a little ways back see
it moving
it get up here where that was messed up
too so basically it's on there crazy
thick it's actually a little clouded
right now cuz I put put it on so thick
you probably shouldn't go quite that
thick but hey sometimes I'm impatient
and we're going to take the Saran
Wrap oh man I didn't get it very flat
but oh well um we're going to push this
down like that which kind of lays it
back into place and it's basically
sticking to that triple thick that's
underneath the artwork the part the the
bunch of it that went under it and then
we had a couple spots up here as well
sometimes depending on how bad it is
when you do this you'll feel the little
chip crack away and then kind of stay in
place your best bet is if you can do it
I can't really reposition it now but see
how we had that big Wrinkle in it you
don't really want that because it'll
show up whenever you go to
paint but you got to do what you got to
do you're better off if it's perfectly
flat and we're going to use
these just to give it some weight
I suppose I could even put a little
clamp on
it let's
see so I've got an old clamp you don't
want to go crazy though it is glass but
I'll I'll just clamp it real quick just
to make sure that it holds down
all right so the clamp's just barely on
there just to hold it flat so we'll let
that dry I'm also going to do the other
side and then we'll come back and check
it out once it dries I'll take it out
front and we'll film a little video of
it right all right folks so here's how
it looks with the clamps on it and again
I was just doing this cuz we've got some
clamps Ling around um but basically
we're just trying to touch up those
bottom pieces so we'll take those off
it's been a little while I I don't know
if it's been long enough to
uh to uh get it where we need it but
we'll mess with it a little bit and
we'll see so let's check it
out let's see what we
got the game glued to it a little bit
don't know if that's a good sign or
not so if it's dry this will peel right
off if it's not dry enough we'll have to
wait a little bit
but yep it's not quite dry enough so
we'll wait a little bit longer I'll be
back in a few um which will actually be
several hours but for you it'll be just
a few minutes and we'll uh we'll see if
it's dry enough to peel that off all
right folks so through the magic of
YouTube several hours have passed so we
are going to carefully peel off that
saran wrap and show you what's left
so once it dries you can just easily
peel it off like so
it's pulling it a little bit where that
crease is that I screwed up
with so it just pulls right
off so you can see that it now has like
a textured appearance that's because of
all the wrinkles that I was talking
about in the Saran Wrap
so you want to try to do better than
that this is not the perfect example of
doing that but you can also see that the
art is now laying down
flat now over here it's pretty good
there's one spot right there that's
still slightly raised so we didn't get
it perfectly all the way down and I'm
thinking that since it's so far back
from the edge of where the hole was I
didn't get enough of the U triple thick
back under there where it would grab it
so that's still a
little little loose but it's it's all
shellacked you know with that stuff so I
think it's going to be good and I don't
think we have to worry about it falling
off anymore so let me try to set this
up
so this is what we have
now those dark blue spots may actually
dry that's I think still wet triple
thick
but you can see how it laid the uh the
art right back down and then down on
this end trying not to break
it there with the light through it you
can see what's going
on so you can see how it almost has like
a there's a textured look because of all
of the uh how I didn't get the Saran WRA
perfectly straight but now that it's
like that you can paint over it so what
you're I'm going to let it dry some more
but what you've got is a
completely
sealed
spot that you can color match some blue
paint to and paint that back in and make
it where people can't even see
it so I am going to actually do that
here on this video so what I'll do is
I'll let this dry another day or so and
then I'll uh I'll show you how we mix
some paint up and touch that up like I
said this is a good one because it's
just that blue area at the bottom there
and just this part over here if this was
the only part I wouldn't even mess with
it I just leave it but since we'll have
the paint from this side I'll just go
ahead and touch it up a little bit too
but uh that's what we're working with uh
I'll see you tomorrow and we'll we'll
mix up a little bit of paint for
it okay we're back so we're going to try
to paint this thing I'm going to show
you how we do it so I've got a whole
bunch of these
little pinballs talking to us I got a
whole bunch of these little paint things
that you can get at Michaels or Hobby
Lobby or wherever
um and so I got a couple blues neither
one of them is perfect this one here is
pretty close though if you look I don't
know how well that'll show up on the
camera
basically as you can see it's a little
too light and it's also slightly
too turquoise it's not quite blue enough
it is blue but it's not it's got a
little more green than it needs in it so
I've also got this one true blue well
true blue is way too true blue so what
I'm going to do is I'm going to take
this one that's pretty
close but needs to be a little bit more
blue and a little bit darker and I'm
going to put in this little bit more
blue and little bit more darker paint in
it and mix it together like my my my man
Bob Ross used to do back on TV in the
day
so the way we do it is we just pour a
little bit in the cap and this is such a
small little screw up that I only need a
little bit of
paint so we'll do like
that and then we'll take some of our
true
blue and you can see a little bit now
whenever the paint dries it dries a
little darker so you can see it's pretty
close the only reason I'm not putting
this right on is because I know from
doing it in the past that if you put
that stuff right out of the bottle it's
always a little bit too light so I'm
going to dark it up just a little
bit don't want to go too crazy with it
well wait a minute this needs to be
shook it started to separate a little
bit let me shake it
up I should be talking in soft tones
about uh happy little trees and
stuff they said Bob Ross was in the Army
back in the day and his drill sergeant
used to yell at him all the time and so
he used to to uh on his lunch break he
would or not his drill sergeant his
officer in command or whatever so on his
lunch I'm going put a little more so on
his lunch break he used to go out and
paint uh pictures to calm himself down
and
uh he he'd learned to paint them really
quick so he could paint them in like 30
minutes an entire painting that's how
the genius that was Bob Ross
started so we'll see him how that
looks so just eyeballing
it
h i don't know folks it might be a
little off so what I'm going to do
is let me see if you can see that in the
thing I think you can yeah so what I'm
going to do is I'm just going to paint a
little bit on top of it and see how it
ends up after we let it dry a little bit
so we'll leave it like that for a couple
minutes and we'll see how that dries and
if it dries dark enough you can see how
it looks a lot lighter uh we'll see if
it dries dark enough and if it does
we'll paint the back of it and if it
doesn't we'll uh we'll remix it so be
back in a second okay so it's dried and
as you can see the the the shade is
about right but it's still too light now
a lot of people would think well pour a
little black in it you can't really do
that if you put like one little drop of
black it'll make it all brown just the
way these acrylic paints mix that you
it's very hard to put any black in it
and have it turn out the way you want it
so what I'm going to do is I'm going to
pour just a little bit more of that dark
blue in it and mix it up and then we'll
see what that
does and you can't take too long on this
because all your paint will dry in your
brush and in your
uh in your little cup here
oh starting to like the looks of
that that looks much better okay so I'm
going to do the same thing I'm going put
a little
bit yeah that already looks better cuz
remember it dries darker so
um we'll let this dry just a little bit
and the reason I'm putting it on the top
is because you can just scrape it off
real easily um but the uh
um also it looks a little bit darker
when it's under the glass too you know
so you got to kind of keep that in mind
and also the sheen will be the same like
right now that's flat and this is glossy
because it's glass but when it's
underneath it'll all be the same Sheen
so you won't notice the difference as
much either so part of the reason you're
seeing a difference with this is because
it's flat and the the Glass isn't so I
think this is going to be close enough
we're not trying to get it perfect we
just want to look pretty decent so uh
we'll let that dry too and then we'll
check it out after D be back in a
second okay folks I think we've got it
it's not dry all the way yet but I can
tell that it's much much closer to the
color it it might be slightly too blue
too true blue but it's damn close so
here's what I'm going to do I'm going to
go ahead and wipe that off I'm going to
turn it over we're going to paint those
two then we're going to turn it back
over and let it dry and then I'll we'll
do another one so uh let's see
here move our paint out of the way
I wish I had a uh let me see if I got a
razor blade here
somewhere amazingly in our store we
leave razor blades laying all over the
place because we're always using
them I just wipe off the wet paint we
won't worry about the dry paint
yet all
right so remember we've clear coated it
so worst case if if the color is not
perfect and you don't like like how it
ended up after it dried worst case you
could actually just uh take it off the
back too it would wipe off the back
because you've got
um another thing too on these they have
a weird little it doesn't go all the way
to the edge there's like a weird little
line but uh if this wasn't perfect after
I was done you could
wipe it back off if you wanted
to
hey that's the pinball
machine extra points if anybody can
reply in the comments below what pinball
machine that is that keeps yelling at us
it's not even that tough if you're a pin
head you ought to uh you ought to be
able to
tell all right so I put it on pretty
thick we got a little bit there too let
me get that
one all right I don't see
anymore so so I put it on thick enough I
probably only have to do the one coat
again on these bezels it's pretty easy
to do because you don't have to
backlight
it and again this is on the front so I
don't know it looks like it might end up
being a little darker but I don't know
we'll see we'll it's at least blue now
see how it's kind of discolored here cuz
it's
dirty it you'll probably end up with the
same kind of thing going on on the edges
where it's not perfect but it's a lot
better than the paint just being
completely missing so we'll let it dry
and then I'll come back and do one last
video one one last portion of the video
showing you um how it ended up after it
dried so be back in a few through the
magic of YouTube though it'll be
immediate and there you have it that's
the finished product now you can see
that from a cursory glance you can't
even really tell that it's been touched
up but if you look close it's not
perfect the color is about dead on I
mean it's really close it's a slightly
different shade of blue but it's really
close a lot of what you're seeing this
part is where the paint had delaminated
that we were talking about so you might
be better off if you got areas like that
to actually just remove that part and
then repaint that whole thing
in and then over here it's slightly
worse because you can see the light
reflecting off of where it's delaminated
but if you get it where there's no
reflection you can see that the the Hue
or the of the color is almost
perfect so if you got anything to do
like that that's the way to do it just
mix a couple together and I usually try
to stay in the same color family so if
it's like I was saying if if you're
trying to make a little bit darker blue
don't put black in it put a little bit
darker blue in it and just try to mix it
mix them together to get what you need
so there you go hope you enjoyed the
video
now um if you like videos like this
subscribe to us here on YouTube We Do
videos usually videos showing off the
games that we fixed and things like that
but uh sometimes repair videos like this
where we show how to do little minor
things like this that are kind of
universal um cuz you can do this on a
pinball back glass uh or any kind of
painted bezel if you like videos like
this subscribe to us uh here on YouTube
and make sure to comment below and tell
us what you think about this and we'll
see you on the next video