Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is joe's
classic video games back with another
pinball
repair video for you this evening on
this classic uh
lost world badly lost world now since
our last video
one full year has passed we've all grown
older including you
and so if you didn't watch the first
video go watch it right now so basically
we got this game
years ago it had been all parted out
it it had been left out in the rain we
believe at one point
as horrible as that sounds and it's such
a cool
classic machine that we said you know
what we're going to bring it back
so we started working on it we got a lot
done we got it up and running actually
if you see the back glass
is doing its thing the cpu board is
working
we installed the back glass in it we got
a work through all the electronics fixed
a bunch of wiring
stuff like that and we got to the point
where we needed to work on the play
field
and then as luck would have it thanks
came up we had a lot more to do
so we we purchased a used play field our
other one is destroyed i'll show you it
here in a little bit we purchased a used
play field
dropped it in the machine just for looks
and
it has sat there like that for a
full year while we worked on other games
but it's time as came so what we're
going to do is this week we're going to
start working on this play field
so the first thing that i've got to do
is paint it a little bit
i am not an expert i am not an artist
but i can do a little better than that
look at it so i want to touch it up a
little bit
in this video we'll get that looking a
little better we've ordered a bunch of
parts for
to repopulate this thing i've still got
the old play field that's fully
populated but it's destroyed so we're
going to save as much stuff as we can
off
of it you can see that in this video and
in the next video
we're going to save as much stuff off of
the old play field as we can clean it up
the best we can
we've ordered some new stuff i've got
some old parts off of other machines
that we can swap out and stuff so
basically when this is all done this
freaking machine is going to be working
again we're going to save this thing
somebody has
has hurt this baby so we've got to do
something to fix it
and then after we fix that one i'm going
to fix this one
why not and then after we fix that one
i'm gonna fix this one and we're gonna
keep going until we fix all of the
pinball machines we've got
but what i'll do is uh the first thing
i'm gonna do is clean this play field up
a little bit
and uh then i'm gonna touch it up a
little bit so i will uh i'll show you
that here in a second
i'll get started cleaning and be back
with my paint
all right the most the mainly messed up
part is here in the center
and uh there's some luckily it's very
busy there's like a lot of art on it so
touch-ups will be a little bit harder to
see because of that you're still going
to be able to see them but it won't look
as bad as if it was major
solid colors but there's a lot missing
actually like where it says
a thousand underneath each number some
of that's completely missing
i don't know what we're gonna do about
that might not be able to put that back
uh the wings are you know a little worn
out so what i'm gonna do first is i'm
gonna take a black paint pen
this is actually latex paint and paint
the lines that i can tell are missing
back in once you do that it usually kind
of gives you an idea of
what else you need to paint in now i'm
not
the best at this but it'll look better
than it does now so
um basically we're just going to go
through and start
replacing parts that are missing you got
to be careful though that it doesn't uh
that you try to keep it fairly thin
and try to
match it up to what's already there
you can kind of look at the other side
too and see how it looks
and this is kind of just a guide to go
by because after uh
after i get it all kind of pinned back
in i'm going to have to go back in and
paint again which will get on the line
again so i have to go back and do this
again after this
so
there is a lot missing too
so we're going to keep inking it in and
then we'll be back when we're done with
that start with the paint
all right we inked in a lot of the black
you can see how that
actually makes it look better just doing
that
and then once you do that it becomes
pretty apparent like what's
screwed up so next up we're probably
going to have to do the red because man
that's
got to be fixed that's the most uh
the the most apparent issue
so i'm going to get some reds and try to
match them which looks like it's going
to be a nightmare because it's not even
like a
straight up red it's kind of a
like a watermelon type red so
i'm going to grab some reds we're going
to try to mix something that's uh
similar and we'll see what we can do
okay folks we've about got it so i took
uh some let me find my other one
i took some i have about 10 different
reds
country red check that out country red
because we're in the country
took some country red a little bit too
dark
added some pink just a little bit
and it took the took the edge off of it
a little bit i painted a couple places
on the red just to see
where does it look right etcetera
etcetera etcetera
and i ended up with here i'll pick you
up be careful
i ended up with uh or was
my spot that i really liked this right
here
has been repainted in and by my
estimation i think that's pretty close
so you can see like this is a little too
pink that's a little too pink so i mixed
them all together and got a
got a couple things going on you can see
here i was too dark
a little too dark now all this is going
to be clear coated so the sheen
will disappear you won't see that the
new paint is
flat and the old paint is a
satin that will all disappear whenever
we put a little clear coat on it so what
i'm going to do is i'm going to go in
and i'm going to touch up all the red
wherever it needs it and make it look a
little better so i'll be back after i do
that
whoa you almost fell i'll be back after
i do that and we'll uh
we'll see what you think okay so we went
through and did all of the red
this part that's missing here is a
little bit darker red so we're gonna go
back and get it
and uh re-inked a lot of the blacks
touched up the green just a little bit
touched up a little bit of the purple if
you rewind it you can probably see all
the little areas that look a little
better now
it's not going to be perfect folks the
way that i the way that i handled the
thousands thing was
i left the nice clean one and then got
rid of the few other ones that were
there and then didn't try to paint in
the ones that were missing
so again it won't be perfect once i
clear coat it'll
it'll uh look a little better you could
almost
probably leave it how it is now once you
put the apron on it
once you get the plastics on it um
you know plastics all the way up the
sides once you get lights on it
it'll look a lot better than it looks
right now but trying to make it you know
at least presentable
we could probably get away with not even
touching up the gold but i'm going to
anyway just for
just for giggles why not make it the
best that i can
i tried to start we had pretty heavy
wear on both of these
kick out saucers so i tried to put a
ring back around them how it's supposed
to be
and touch the purple up around it uh so
that helped a little bit
so what i've got left is i need to get a
darker red to put a couple of these
little lines back in
and then i need to um
get a yellow that i can touch up a few
of those spots i'm probably not gonna
i'm definitely not going to redo the
whole thing but just to fill in a couple
of areas where the heavy wear is
and then we'll leave it at that it
doesn't have to be perfect it just it
was worn
just enough that in my opinion it looked
pretty rough so
we've touched it up a little bit
hopefully that'll that'll uh
hopefully that'll look much more
presentable once we get everything back
on the table
so i'll touch up those last things and
put a little clear on it i'll show you
the final product on that
okay folks we're putting some of the
little brown lines back in over the
yellow as you can see the yellow is not
a perfect match but it's all right
so i'm trying to oh
try trying to uh put some of the lining
back in
don't know how much of this you can see
can you see up that far
no you can't let's see
back it out a little bit
so there's all this very
cool brown highlights that kind of
pull everything together so i'm
trying to paint some of that back in
again i'm not an artist people this
you know this is not a top of the line
restoration
the people that are really good at this
stuff they would like hate this they
would say this is horrible i'm just
butchering it but the way i see
it i'm taking a mediocre game and i'm
making it look a little better
let's see here and i'm left-handed so
it's kind of hard for me to
get the uh camera where my hand doesn't
cover up
what i'm doing
what i've always found whenever you do
this is you have to keep going back and
putting the black back over it
and you can kind of look at the other
side and see what it looks like to
kind of make it mimic it
uh
some of these colors like brown some of
the darker colors
if it's a little bit off your eye can't
really even hardly discern it like you
won't even notice it
of course all you folks will because
you're watching it on youtube so you
know exactly what went down
but you get the point
if you can kind of like any place where
you have like
you can't see it that good but like
right here
right there is like a big open area
so it's easy to tell that that's been
repainted but these streaks
like down through it like that if you
have to paint like part of the brown
back over and everything it kind of
masks it and stuff wherever your eye
doesn't catch it as much
and the the one of the problems matching
a color on something like this like this
yellow
first of all yellow is very hard to
match
yellow and red are like tough colors if
you ask anybody that's ever painted
anything
yellow and red are rough but the
the problem with a pinball playfield
like this is that
there's wear so it's not really the
original yellow not only is has it faded
but the ball has made little swirl marks
all over the play field
so you need to try to like if i paint it
like the color's about right but the new
paint doesn't have any wear on it
so it's obvious what's been painted and
what hasn't
the parts like that where like i just
painted like i painted it yellow and
then i just painted brown over it and
i've also redone the black line over it
so i mean that's going to hide pretty
good
that might be about it for the brown let
me see
let me see
hmm y'all see anything what over
i think that's about it
looks pretty good all right i'm gonna
touch up the black just a little bit
more and then i'm gonna clear coat it
and we'll see what it looks like all
right this is what we ended up with
uh again it's not perfect but it looks
pretty good i think
not bad considering where we were
what do you think leave a comment below
now you can see this is definitely not
perfect
the proper way to do it would be with to
mask it all off
carefully and to use an airbrush you
know i don't have an airbrush
nothing good with an airbrush i'm not
even good at masking anything off
so that's one way to do it but you saw
how we did it um you can see i didn't
get the color quite right
on the red i it was matching at the top
but that's because there was a lot more
wear at the top with ball swirls and
stuff so down here it was a little bit
too dark but
yeah is what it is you can see that the
wings from a distance look pretty good
you can't see too much of the wear you
can see right there where i painted
where i touched it up
but that looks a lot like right there
where i didn't touch it up you know so
it kind of all blends in looks pretty
good i think a lot of people won't even
know
so that's what we ended up with now like
i said once we put the
apron on once we get the plastics on and
everything it'll look much better so
that's going to be
part three of the repair series so this
is the second video that we shot
where basically we had to fix the play
field the first video
we fixed the electronics in the back box
the second video we touched up that play
field and show you how we did that
and the third video will be the dreaded
playfield swap
so look for it soon we're going to start
doing it tomorrow i don't know when the
video will be uploaded
um it might you know usually it's a
couple weeks probably after you see this
one but keep watching our
youtube channel and you will see that
when it comes up basically we're going
to lay it out
i'm going to finally show you the old
disgusting play field that was in it
which is like a horror show people
i mean like a horror show so when you
see that you'll see why we had to go
through so much trouble to get
a decent play field um but we're going
to do the
do the play field swap and start
populating this one with
all of the little sockets and light
bulbs and switches and coils and
assemblies and everything
that we need to make this sucker work
again and then worst of all
we have to put the wiring harness on it
so you're talking a wire for every light
two wires for every light
and two wires for every switch
two wires for every coil it's gonna be a
lot of work folks
you don't wanna miss it but we're gonna
do it and we're gonna make this machine
uh do what it's supposed to do so uh
make sure you subscribe to us if you
like these kind of videos we're doing
all kinds of this stuff
right now so usually with arcade games
but we've been doing a lot of pinballs
lately we've
got a bunch of storage so we're trying
to get them all done
and subscribe to us here on youtube and
whenever we get our next one uploaded it
will let you know make sure you comment
below let me know what you thought about
this
do you think i'm a complete hack or do
you think we uh we did
we did a decent job on that right
so make sure to comment below and we
will see you on the next video