One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
AI Generated·May contain errors
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool pinball repair video
for you this evening. This is a Williams Jungle Lord that we've been working on for a gentleman
and we did one video on it where we kind of worked on some light problems and some display problems
and a few things, some flipper problems, and another thing that he wanted us to do was to fix
this issue up here. There is a little mini play field up here with a smaller pinball in it that
you can access and unfortunately they get a lot of wear on it. So I know it's all flashing right
now but we'll take this off here in a minute. But basically there is a little ball that rolls
around and it's done some damage to the paint and so they make a little plastic piece that goes over
that to kind of cover up then protect it. But the problem is the ball gets stuck on that piece of
plastic, that protector there. So we need to get down into that. We're going to remove that protector
and then we're going to clean up the play field and then try to repaint the play field
and then clear coat the play field so that it doesn't need that little plastic piece and it
should play a lot better with that. So first thing I'm going to do is slide the play field out a
little bit so we can get down there to it. So each game is different but on a lot of games if the rails
go all the way out and on these they do, if you actually slide it out to where the
kickers are you can set the kickers on the front of the machine and that way you're not smashing
anything. There's a metal piece underneath the coil support and that'll get it out where you
can actually get to it and work on it. So I'm going to remove this plastic to expose that
by just taking these screws out. I think he's got some updated screws too. That's pretty cool.
I'm going to remove those and these kept nuts or whatever they're called and take that off.
So with that removed you can get a better look at what's going on.
So we've got some LEDs. Look at the little directional LEDs. And then there's this little
smaller pinball and there's this little plastic protector here we got to get out of there. You
can see how it's actually worn it. So you know that probably would have made all of this get
even worse if it wasn't on there. So it's a good thing they put it on there. So you can take all
this out. You know you can take the nails out. You can take these out. I guess it depends on
how easily they come out. If I can get them out I will. Because we're going to do some paint.
So basically I'm just trying to strip it down a little bit because we're going to touch it up.
So I'm going to do that. Okay so I've pulled most of the stuff off. Those two posts will come off
too but I don't really need to take them off. We're going to get a little bit of clear coat
on them but you won't even be able to tell. I was able to get the ball rail off too so that helps.
So this is where people get a little squeamish because to clean this up you're going to actually
damage it a little bit more. But it's already screwed up. I see all this wear here. I mean
you are already knee deep in it. So just go ahead and do what you need to do to clean it up. So we
got to make it look the best we can. So I've got to get all of that dirt off of there or as much
of it as I can. Now this is going to be a tricky touch-up. It's not going to look perfect because
of the way that it is half tone printed. So see how down here you can see yellow dots and up here
you can see orange dots. That's just because they're changing the size of the dots as it
goes basically to give it a fade. You know it's kind of like how newspaper is printed.
Very hard to mimic that so we're not going to try too hard to mimic that. So what I want to do is
we're lucky that it's way up at the top of the play field. So from back here you can't see it
as much right. So what we're going to do is for those parts with the yellow we're going to try
to get a color that kind of blends into that. Now I can put some little dots on there but the thing
is you can't ever get the pattern exactly perfect by hand so you'll see every little dot that I put
in there trying to mimic that. But I can certainly make it look a heck of a lot better than that.
So if we can get a yellow mixed up that looks similar to that when you paint it in it will hide
you know the big wear areas and of course it'll certainly hide this these white areas.
And then this up here which is like I don't know if that's a hand.
It's not a hand is it that's like that's whatever these are it's like
stalagmites. The stalagmites. I guess they're tree branches. We can paint those back in pretty good.
So this is what we're starting with. So next step I'm going to clean it with a magic eraser.
So I use Windex a lot because Windex is just pre-mixed soapy water basically. You shouldn't
use water a lot on a wooden play field because it can make it swell and warp and things like that.
But if you're using it you know for something like this where the thing is just filthy it's
a pretty good alternative. You don't want to make it go too crazy with it though.
And this stuff is this is a magic eraser made by Mr. Clean if you're not aware of those.
It's a cleaning product. The reason it cleans up so well is because this is a certain type
of foam that's very tiny. It has like little tiny molecules that it's composed of or whatever. I
don't know if it's down to the molecular level but there's little tiny components of it. And
what happens is it gets down all the way into the wood where the little scratches are. So let
me see if I can show you some scratches. See the lines in the wood there? That's where the finish
of the wood has cracked over the years and they just they all do that. Well it's all it's like
that all over here too. You just can't see it. Also when the ball rolls over it it makes these
little micro abrasions on it. Let me find you some of those. There's probably some down here.
Yeah see all the little swirls like all the little round pieces? Look in the flesh there
the flesh tone. See all the little black circles? So those are little micro scratches in the play
field where it's cracked apart and dirt has got in there. So you can clean this but you're not
going to get rid of that. That's going to stay no matter what you do. If you take if you use the
magic eraser though it just happens to be that it's a particularly good product for this this
problem. Because the foam is so small it gets down in those cracks and we'll clean that out
to make it look better. The problem with it is though it's so fine that it basically acts like
sandpaper. So you have to be careful because if you just keep rubbing it it'll just rub all the
paint off just like that. So I'm going to use it to clean this and it is going to take a little
bit more of the paint off. But whenever we're done what's left will be clean and we already
had to repaint a bunch of it anyway. So that's that. All right so I'm going to spray it down
wipe it down with the magic eraser and we'll see what we come up with. So that's how it looks after
it's been cleaned off with the magic eraser. You can still see a little bit of this but if I zoom
in on it you can see what's going on is it's wear. It's just where this stuff is worn away. So you
can't ever get it perfect but I think it looks a lot cleaner than it did. And so now we're ready
to start touching it up. You could if you wanted to as well like at this at this level of it go
ahead and clear coat it put a level of clear on it. The guys that are real high end that like do
freaking awesome work I wouldn't ever compare anything I do to even one percent of what they do
like high end pens and stuff like that. Whenever Chris does one he I think his name's Chris right
yeah Chris um whenever he does one he'll he'll he doesn't he wouldn't even mess with something
this bad probably but um he clears it first and then he'll he uses an airbrush he'll touch up
one spot and then clear it again touch up another spot clear it again and sometimes he'll have
20 layers of paint on it but he's you know very professional high end literally high end pens
where uh you know he's used to spray painting $600,000 sports cars and stuff like that so
you know he's very professional that's what he's doing um that's not how we do it because we're not
as talented okay so what we're going to do is the poor man's version where it just makes it look
better and so uh um we're basically just going to mix like uh acrylic paint together to try to
match these colors as best we can and we're going to paint it in by hand as best we can
and then we're going to clear over it to lock it all in so that the ball can roll over it without
chipping the paint off so the very first thing i'm going to do i think is i've got a little uh
acrylic paint pen that's just black ink black paint acrylic black acrylic paint and i'm going
to touch up the lines that are screwed up so that we can see where we need to have one color and
where we need to have another color i want to do this part first because this is the hardest part
um well not the hardest part but it's the part that we can't tell what's going on now the this
black ring around it you know it goes to like right there so even if you didn't know exactly
how this looked you can see how these look in other words you can just do whatever you want
really but i'm going to look at a picture uh online on like the internet pinball database
and get a good look at how that originally was and try to make it look as close to that as
possible so i'm just basically going to draw in the missing lines with a black acrylic ink pen
okay now you're going to be tempted to do that with a sharpie do not do that with a sharpie if
you do it with a sharpie the problem is the way that the like the catalyst or whatever that's in
the sharpie it doesn't like whenever you clear coat it so it'll look just fine and then whenever
you clear coat it it'll start running down the play field and make the biggest mess you've ever
seen in your life trust me i've done it before so get acrylic paint so acrylic is water-based
paint so i like this particular brand posca you can see this is a 0.7 millimeter tip it'd be better
if we could even get a smaller one but that's my main problem is the line's going too thick but
this is basically just black paint water-based paint inside of a pen so you can draw with it
and it is japanese ink and made by made in japan maybe it's french ink i don't know
france has something to do with it posca um oh yeah if you want some of these
we've got these linked on our website they're real cheap too they're not that expensive but
it's and there's different colors we always just use black because none of the other colors ever
match blacks always match pretty much then um if you go to lions arcade.com at the top of the page
there's a parts page and if you click that there we've got a bunch of stuff linked on there that's
like all of our different things that we use whenever we're working on machines and we've got
these paint pens on there if you follow any of those links it just takes you to amazon and we
get a tip for anything you buy on there so we appreciate everybody that does that um so yeah
so that's kind of drawn in how the art looked i looked on some pictures online now it looks weird
obviously and the crazy thing is is most of them are blue so this yellow and orange
um was just on the early stuff it's like the prototype look um on the later versions they
had a blue cabinet and this whole plate mini play field is blue instead of yellow so and the red
that's in the the little limbs or whatever isn't there it's just yellow so it's a blue background
with yellow limbs there's no red on it so kind of a a little bit lesser scene version of it
all right so we're going to let that dry a little bit and then uh we need to mix up the yellow that
is in the trees which is actually a little bit different than the yellow beside it because it
doesn't have the half tone on it it's the same yellow but they've printed orange over this so
that's yellow and that's yellow but this yellow has little orange dots on it which is the half
tone of this orange fading down there to give it a gradient look like i said we're not really
going to be able to replicate that but we're going to we're going to cover up a bunch of
down to the wood paint for sure all right so i didn't film most of the painting of it because
it was real touch and go because like i said there is a gradient and you can't match the
this is what we ended up with yeah looks pretty good you know for hand painting it i'd say it's a
seven out of a ten uh and i think it's about as good as i could get it um even if you airbrushed
it which would make it look a little better i don't have the ability to airbrush but even if
you airbrushed it you can't airbrush a gradient so that's really tricky to get that right um
so what i did was in the places where i touched it up i just tried to kind of split the difference
and not make it the yellow and not make it the orange just make it kind of a mixture so i
repainted the three finger looking things um the red was a pretty good match the yellow like i
said it's about as good as i can get it um i'm a big believer though and most people are gonna
have no clue if most people would have zero clue there's anywhere up there at all they're just not
gonna look at you're gonna see the ball flipping around up there and going in one of the the uh
little pachinko things and that's that but i cleared it i did decide to clear it before i put
the paint on because i knew that that yellow was gonna be a cluster so i think i cleared it just
so i could wipe the yellow back off easily if i needed to if you're using acrylic paint um it's
easy to just remove it so i used cadmium yellow cadmium yellow mixed with saffron yellow and then
i've found in the past that everything on these pinballs is always a little green it's kind of
hard to see it um i haven't put all the screws back in there it's kind of hard to see it but
like that yellow right there all of that has like a green hue over it it's just from how it's faded
over the years and plus he's got green lights on it actually but the um it's hard to explain but
if you see like a true color next to it the the colors on the play field always look more green
because of the clear coat that was put on it originally or something right um so i mixed those
two yellows together until i got it pretty close and then i put a little bit of green in it which
kind of dulled it out and it got where it's a pretty good match i think that looks a heck
lot better hopefully the customer will be happy with it um i did some spot touch-ups too on the
end lanes he wanted to know if we could do that and then this eagle here i usually don't do that
because the problem you run into is um you get sheen problems so see how the light is reflecting
off the play field okay now watch it when it goes over here see how it changes a little bit
and then it comes back and then the same over there
and then where the bird is it kind of messes around the problem that you run into is this
has tons of wax on it it's got years worth of wax on it look at that plank all the way down
so the the play fields were waxed originally um that soaks into the play field and all of this
so unless you clean the whole thing down now remember what we did up here whoa remember what
we did up here yeah we took a magic eraser and cleaned it first when we did that that took all
the wax off so when you spray the clear on it after that the clear just goes right on it no
problems if you do it on wax though you're painting over oil waxes oil uh and it it will leave a a
orange coated an orange peeled coat of paint it just doesn't look right so you can't really do
just spots very easily so all i did was i cleaned off just that area with a magic eraser then i
then i painted my little touch-ups in and there wasn't just a little wear here and there painted
my little touch-ups in and then i lightly cleared it but the problem you have is where your new
clear meets the old clear it doesn't the sheen is slightly different so like look at the light
coming down and then it changes when it gets there that's because that's where the paint is
okay so i don't i can't really do spot touch-ups very well the other thing is you're basically
sealing in any dirt that's on it so you have to clean it first and then you get in the whole thing
where you really need to take everything off to do it because you get over spray on things i just
put a little paper towel over the plastics and stuff um so we were able to do it but it was you
know it's not really the way we like doing but anyway we got those looking better and we got
that little i think that mini play field looks a lot better because i've had some pretty heavy
wear on it so i'm gonna let the thing dry for a couple days i'm gonna put the plastics back
together and then we'll all right folks it's viewer mail time we've already opened this one but
if you uh want to send us viewer mail you can't read our address here we ripped it off
our address is 139 it's joe's video games 139 caldwell street rock hill south carolina
29730 have you noticed that if you get stuff from amazon they don't always put the zip code on it
because it's unnecessary to them they have their own shipping system where they don't use the us
zip codes it's the craziest thing i've ever seen i can't believe somebody's been able to pull that
off i'm not criticizing it i'm just saying um so like whenever you get something from amazon a lot
of times it will not have the zip code because they don't need the zip code because of the way
so let me see if i can find the note in here i know there's a note let me move this
somewhere else you can't see it i'll do it i'm going back for the note there's
gotta be enough let's move that over all right i see the note the note is in here
let me see what else looks like there's all kinds of stuff somebody sent us all kinds of stuff look
folks you don't have to send us anything but if you want to send us a letter or something that's
okay so a lot of times people will buy something on amazon and send it as a gift or something
um again we're not soliciting that it's just what some people do let me mark out his last name
just in case he doesn't want to be doxxed all right his last name's real long it's like mont
montante montague is a french name a gift for you hey joe and ronnie after watching you snip
wires to test if an arcade psu was bad power supply unit was bad i thought i'd send you some
handy tools to help you test without having to cut wires or risk damaging arcade hardware hardware
enjoy from eric yeah so we did a video where joey was working on a golden key i believe and he was
doing some cutesy stuff with the uh with the um power supply so he has sent us a few things here
one is dr power three universal atx power supply tester so it's like a i guess basically you plug
the power supply into it and it tells you all kinds of goodies about it um what's your voltage
is that 12 5 3 uh 5 volt standby i guess is that what that means um the wattage of it um
and i don't know what pg would mean features supports every atx power supply available
today up to atx 12v version 3.1 detects the sense zero since one sideband signals of pcie
12 plus 4 pin connector yeah that's that little extra connector that comes off uh
150 watt 300 watt 450 watt 600 watt real time displays the output voltage for 12 5 3.3 and 5
built-in diagnose diagnostic system for low voltage high voltage no voltage and pg alarm
systems so it kind of shows you all of this um and it says the check button it's just got a big
button you hit on it you plug the 24 pin connector in there and the 12 uh plus 4 pin connector in
there um pcie 6 pin or 8 pin connector sata connector cpu 4 pin or 8 pin connector okay
well that's pretty cool made by thermal take i like it all right well thank you eric we will
use that and then there's a couple other things here this is a harness it looks like um 24 pin
pin atx red led jumper so i think it's probably what joey was doing where he was hacking the
wire basically you can put this in and press this switch and it basically turns on the power supply
without the reset signal or whatever that it needs so that's useful thank you sir
and finally but not last let's see what this is looks like another type of adapter
that's one with the little jumper built in for the same thing i suppose very cool let's see what
sdtc tech 24 pin adapter to the motherboard something atx blah blah to the motherboard
new all right well thank you eric we appreciate you looking out for us and we will put that stuff
to use and see what we can uh accomplish with it but uh we uh we always like it when people
send us notes or letters or if you have little things like this that you think would make our
job easier we appreciate it so with that said let's get back to the video all right folks so
it says jungle lord bonus x four and five lanes i can't hardly read it light turnaround to advance
bonus multiplier that's the end lanes magna save three bank targets activate magna save timing
activate magna save by holding the red buttons on the cabinet signs okay yeah i heard it do that so
when you knock down all three drop targets it starts making this noise and there's a lamp that
flashes in front of them that's telling you that the magna save works double trouble completing
five bank targets that's at the top sequence lights double trouble single target scores 10
20 40 80 160 when made consecutively drain shield returns ball in play if made when lit
keep wl shooting oh drain drain shield is on the outlines okay two times scoring
awarded by scoring one two three four five two x scoring one two three four five sets these red
lights here uh so the two is the little horseshoe turnaround here three is that little drop target
there four is here five is there and one is up top there's a target multiball spotting lord
lights the eject for time to multiball spotting lord during multiball awards special so lord
oh it's the little mini play field that we worked on lights ejects for time to multiball
okay that's cool so like if you um oh there's one up there at the top too
so if you get lord in the mini play field uh you can land in one of the saucers to start
multiball that's pretty cool all right so that's that let's flip it a little bit i'm not very good
at the magna save though but we'll see what we can do yeah it's all you can it didn't have the
balls with it but i put a couple of new ones in there i believe the gentleman told me that he got
see that's the magna save hear it let's see if we can
yeah so the magna save appeared to be working we lost our first one i believe the gentleman told
me that he replaced these inlanes those little metal things you can buy new actually because
they they wear oh that's something it's stuck on that little plastic thing in the on the shooter
i think i was telling us that the right magna save was on
and i don't know if it's just for the side that you got the drops on okay there's our little
a little bagatelle work i gotta hit the little horseshoe thing for you so you see how that works
there you go bagatelle again mini play field oh it's stuck all right i gotta figure out why that's
stuck it's like i think that ramp isn't i've got the little plastic thing the little plastic
divider too tight where the ball can't get through it's a cool game i like the layout and stuff
all right let me see if i can figure out why the ball's getting stuck up there it's because of how
the nail is bent i need to bend the nail out of the way a little bit it's just barely keeping it
where it can't get through all right i bent the nail out of the way the ball fell down where it's
supposed to be we'll see if we can make that number one spot again without it getting shot
without it getting stuck all right number three works just fine i can get it back up the ramps
oh that's one way to get it up the ramps lose the ball i'm not quite enough not quite enough
i'm trying to make it where it's not like yeah that thing will get stuck on that little plastic
insert in the inlay i mean the shooter lane
oh it missed it'll do it too if i think if it lands in that other saucer
it's a little harder to land in that one though didn't like that didn't i made it that time
oh oh it saved it and that was what that was i thought it was like you know crashing
oh i always try to like hold the ball roll it backwards a little bit but on that one if you do
it it goes down a ramp so i've got the d and the r up at the top but they were spotted to me the
ball didn't actually roll through it oh oh we matched that was that buzzer all right we'll
play one more game i don't know i think the out lanes are pretty forgiving on this
played around with too much it's hard to get that easy shot to the flipper just right i have yet to
get a million points on this i'm still like right now i'm at 166 000 well it goes down to r just
fine okay there it went down the deep so now we know yeah it was just the nail was stuck
the nail i i had just reinstalled was uh bending over a little bit catching the ball
okay cool multi-ball timer yeah baby everybody's staring at me now
well there that's my typical multi-ball cycle
lasted about three seconds look i'm not worried about it
oh i see there's a uh there's a timer on the thing where the ball in play is it now is up to
four it's down to 14 seconds all right now it went back and it says three balls so
it actually shows you the timer that's pretty cool on a pre-dmd game a pre-alphanumeric game
all right folks what a cool game hope you enjoyed it we will see you on the
next video this one's all ready to go ready to go back to the customer