Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool pinball repair video for you this
evening we have been working on this
Bally lost world
pinball machine that's pretty rough and
on the last video we actually got it up
and running it's running right now if
you look at all of the lights blinking
we work through all of the game boards
but we don't have any displays so on
this video we're going to try to fix
some old displays I've got a ton of them
in storage and they're in various states
of disrepair so we're going to dig
through see if we can find some that we
can repair and kind of go over what goes
wrong with them and things you can do to
fix them so we figured we'd film it
while we're getting them ready so we're
going to need five six digit Bali or
Stern displays so let's go in the back
and see what kind of parts we've yeah
so here is some of our hoard this is
like a lot of displays that we've had
for years and years and years we bought
a bunch of them from a guy one time and
had them shipped and a ton of them broke
but we got them so cheap that it didn't
really matter but we've got all of these
and then we've got all of these over
here that have bad glass every one of
those has bad glass so it's either the
glass is cracked or burnt or something
or the other so all of these are not
usable but they have parts on them so we
might and some of them are just stuff
like this where the glass has been
ripped off of it so none of these are
gonna work some of these may though so
what we've been doing is we've been
going through and whenever we get a game
that needs displays we've been going
through in a final displays that pretty
much work fixing them up a little bit
and put them in the machine but now
we're down to a displays that are broke
so we actually have to fix them right so
here's a good example this one is marked
and says wrong digits on it but the
glass on the front looks pretty good
looks very usable but it says wrong
digits so it's probably putting the
wrong digits up so we're gonna slide
that in we'll do that one first we'll
slide it in and confirm that that's what
it's doing and then it will fix it so we
turned off the game you always want to
unplug and plug in displays with the
game off of because that will fry the
decoder chip on the the display which
may be exactly why this one's screwed up
it may have been somebody unplugged it
while the power was on or something but
what it's doing is it ran the the
display test and it should be going 0 1
2 3 4 5 6 7 8 9 0 1 2 so it's got all of
the digits screwed up like it's not
doing the right ones that almost
certainly is probably that decoder chip
on the on the display so let's go look
at down
all right so we'll go over a couple
little things like these are the
schematics for the Bally displays
they're all pretty much the same so
there is a connector right here and so
you get a ground coming in on the
connector you get a ground and you get a
five volt you can test both of those on
the board and you see you need that
voltage but the only thing it does is
run this one chip so there's this one
chip which is a BCD to seven-segment
blinking chip MC one four five four
three le right so you get a ground and a
five you get one two three four you get
five connections to the chip one's a
blanking signal so it's a beat CD to
seven-segment the blanking signal is one
of the connections blinking signal and
you get do d1 d2 and d3 and then down
here you get the display latch strobe
and then you the key is the spot that
isn't connected 11 and 12 are not
connected and I'm wondering if that's
the only I don't think that's the only
connections is it
you can look on the bottom so here's the
ones that connect to the to the tethers
like a digit and Abel on everything
let's see here how do they do that oh
it's at the top here okay so there's one
two three four five six the six digit
connections and then a high voltage so
the high voltage is a hundred and ninety
volts so basically the the the gameboard
turns on each digit and it has a strobe
I guess that refreshes it or whatever
but anyway all of the information about
like what it should display what number
it's just display bubble robot is
handled by this one chip so if you get
weird any kind of weird display where
it's not it's showing the wrong score or
something like that it's almost always
this this chip if there's a segment
missing a lot of times it's this chip or
it's that's one of the transistors on it
but with the problem we were just seeing
where you just got scores missing but
there there are other times and all that
it's almost always going to be this chip
there's nothing else that it really can
be so that chip is about five dollars
something like that it's a little
expensive
I think it's obsolete they don't make
them anymore
so this is the one that was in it and
it's pretty rough look at the rust and
everything on it now you can see it so I
needed another one so I couldn't pay
five dollars for a brand-new one or
where could I find a bunch of used ones
alright so I just stole one off with
another board put a socket and I always
put a socket in because now I'm home
free now you know I got the socket in
there I can pop that one in and out
easily so if this chip is bad too
I can put another one in another one end
another winner and if I find one that
works off of a parts board saves me five
bucks all right so let's pop it back in
we'll see if that fixed it okay so that
seems to have fixed it I don't know if
on the video if you're in real life it's
just blinking solid but you might be
catching it a little different on the
video because of the shutter speed but
that fixed that one okay so another one
that we have our next one that we're
gonna mess with this one also looks
pretty good but on the back I have
written it messes up the other display
so we're gonna see if that still holds
true so I'm gonna pop it in one of them
and then we'll turn it off pop it in one
of them I'll turn it back one and we'll
see if it actually makes that display
screw up okay so I put it in the second
player and I don't see it messing
anything up so it could be a situation
where it messes up a display if it's in
a certain spot or something or it could
be that I had a board that was messed up
or a connection that was messed up and I
thought it was the display so it looks
like maybe we've got two good ones now
but that one's still suspect so we'll
watch it so let's go grab a different
one so this is yet another one that I
have written messes up other displays on
so we'll see if we'll add that one to
our two and see if it messes anything up
well this isn't this isn't as fun for
you but it's pretty fun for me I'm
finding fully working displays
apparently but okay I found another one
in my goodie box that I was able to just
Reece odder the connection on and it's
looking good so we got five good
displays you know what that means one of
the next thing and we got a bunch of bad
displays so next up we've got all the
displays doing their thing I need to try
to get some more light bulbs working so
pretty much every bulb in the back box
is burnt out so I'm gonna take all those
throw them in the trash and put new ones
in there and see what that looks like so
so put all new bulbs in it no LEDs here
people
we're original bulb type of people here
of course we haven't done anything to
the play field yet but I did do the
bottom of the play field so I lifted it
up swapped all the bulbs and I cleaned
all of the switches under the play field
so the top of the play field of course
is completely destroyed and needs to be
completely redone that's coming up but
we did all of the power we got the mpu
board working we did the lamps we've got
all of the lights replaced except for
the general illumination ones under
these shields which we'll do whenever we
do the type of play field and the pop
bumpers we have to take apart because of
those skirts being all destroyed right
but there's nothing keeping this thing
from playing so let's see if she'll coin
up all right
[Music]
my finger in there and get get bit don't
get bit people see if it a see if it'll
score or anything
of course we're sitting flat on a cart
let's see if she's doing anything yet
[Music]
we've probably got a fuse blown on the
playfield
yep so not none of the coils are working
on playful slingshots aren't working the
pot bumpers aren't working what all the
switches are working so basically so it
counted down so it knew that the ball
was in there because the switches since
that but the coil didn't kick out so
we've probably got a fuse on the bottom
of a field blown but basically the thing
is up so I'll check that fuse real quick
and then we're pretty much at the point
where we're going to tear the play field
apart and start working on it so in the
other video you don't put new connectors
on that power supply and I knew the
solenoid voltage must be working because
the board won't boot without it and
board kept booting so on the power
supply the transformer assembly here's
the solenoid voltage and so it comes
down here and it was on it was going to
the cabinet and it was going to some of
this stuff which is what goes over to
the to the game board right but it
wasn't going to the play field because I
had a bad solder joint on one of my
little connectors that I replaced so
let's try this again well let me plug it
in first that way it'll boot up
a little bit up here and look at saved
my one extra credit that we had on it
from a minute ago that's better
pop bumpers are work and kind of kickers
are working but they've got old rubber
one on so all right salt thus if the
saucer works so the game is playing but
I don't want to hit it with the Clippers
and if the play feels old and filthy
like this you don't want to play it much
anyways because you're basically the
ball is gonna grind sell this dirt
that's probably all pieces of the the
rubber rings and it's gonna grind that
crap into the paint and make it even
worse it's already bad enough you know
so I just wanted to check it so I think
we've got the game up and playing of
course we still need to clean the
cabinet we need to put legs on it but
we're ready to start working on the
playfield now so I should know it was
gonna do that so they will I'll put it
back I'll back up and start unscrewing
everything from the playfield and we'll
lay it over here on this pinball machine
next to it and I'll just kind of lay it
in kind of the spot that I took it off
the machine to help me remember where
everything goes back so we pulled most
of the stuff off of it I'm gonna take
this apron off too we pulled most of the
stuff off of it and this is what we're
starting with it's completely filthy we
just laid everything over here so the
main issue with this playfield is that
somebody at some point took a big sheet
of Mylar and hoop about fell down and
put mylar even over top of the other
mylar this from the slingshot mylar
appears to be under it yeah
so they put mylar over this entire
bottom half of the playfield so there's
two ways you can remove mylar you can
freeze it off or you can heat it off so
I've tried both
and the problem I always run into on
these old play fields which is pretty
much all I do whenever you peel the
mylar off it starts peeling the paint
off too if you freeze it it does it if
you heat it up it does it so it sucks
that this mylar zone here and I would
love to take it off but if I do I'm
gonna take off
2030 percent of this paint and then I'll
never get it looking right again so we
can either leave it how it is or it's
imperfect or we can pull it all off
where it half destroys the playfield
paint it all back and then make it
imperfect again so it's a lot of work
where I don't think it would benefit as
much now if you've got a newer machine
maybe one from the late 80s from the 90s
yeah it's pulling a mylar off works
great these old ones like this that are
in this rough of shape it just you can't
do it there's no there's no good way to
do it
I have yet to see somebody take a
machine that's this bad and remove mylar
from it if you get little tiny pieces
maybe but look at all this I would have
to redo if I pulled this off and it
screwed it all up
I've tried it on about eight machines so
maybe it can be done but I can't do it
so I won't be able to I won't be able to
do that on this video so we're gonna
have to leave that freaking mylar so to
make up for the mylar we're gonna have
to get the rest of it looking nice and
clean and get everything looking great
and then the rough spot will be
basically where the mylar is which is
the worst part but what can you do
people I think it's gonna be all right
though this will not be a collector
quality machine that really none of ours
are it'll be a good players condition
machine somebody will love it they'll
give it a good home and they'll play the
crap out of it and that's kind of what
we would prefer anyway so the first
thing I need to do is just clean the
crap out of this thing because it looks
horrible
but some of us just dirt that'll come
off so like all this right here it looks
god-awful but most of that will clean up
it's just dirt
all right so I did the preliminary clear
cleaning just to get all the loose dirt
off of it it really made it look a
little bit better we're starting to get
the filth to disappear we're gonna
replace all that don't worry about that
so you can see they mylord over some
touch-up paint that they put on the
green with blue they painted green blue
people there's also a little piece of
mylar up here at the top it's not quite
as bad but we'll see what we can do with
we'll see how good we can make it look
even with the mylar so the next thing
that I'm gonna do is I'm going to get
some magic erasers and I'm gonna
magically erase the dirt on the play
field so you can see we've got a couple
problem areas like that's gonna get
worse once we hit it with a magic eraser
so I have to touch it up but that's fine
because I have to touch this side up
anyway but hopefully we can get rid of
some of that if the mylar wasn't here I
could lighten that but you've got just
general filth there that'll come up all
of this will clean up around the thing
so you're gonna have a ton of the bad
around that saucer there this one's not
quite as bad and the mylar here is
actually Factory so that's how it's
supposed to be and you can see that
originally it was actually the playfield
was actually purple which matched the
rails on the side but it is worn to like
a burden like a like a Brandywine type
of color let's go with that
that's Brandywine people all this up
here looks pretty good there's a little
bit of where there but it's under my
alarm so we won't be messing with that a
little bit of where there might be able
to touch up a little bit of planking
here I might be able to smear some color
back in there whenever I mix it for this
area down here
it's pretty rough but I think it's gonna
come out pretty nice actually once you
get all the plastic shields and
everything back on you get the lights
nice and bright you wax wax wax wax wax
it so all of it reflects the light bulbs
and everything you get a nice back last
one you get the cabinet looking good
it's probably gonna be pretty nice but
we're in the rim the low spot now so I'm
gonna hit it with the Magic Eraser which
is gonna be the worst part because after
I do that more of this paint's gonna be
missing and it's gonna be pretty rough
but it'll be clean or clean as clean as
it'll get so I'll get the Magic Erasers
and go to town okay so clean the
slingshots down this one actually the
nylon errs I don't know that's not
called an eyeliner it's a nylon kicker I
don't know what it's called but this
little thing is broke on it so I need to
replace it this is a new old stock one
so I need to replace that but I can't
get the little roll pin out so I'm gonna
have to pull the whole assembly out so I
can go somewhere and beat on it looks
like they may have already replaced this
one because the pin is about half out
but so we got a mess with that but the
looks like the flippers actually cleaned
up a little bit we got all the dirt
track off of here area that you saw
earlier that was so horrible we cleaned
this up so that we can see a little
better what is actually missing there so
the more purple paint will go a long way
same thing there so cleaned up pretty
good not bad except for the my lard spot
but all of this over here cleaned up
good this cleaned up under the shields
good look how they they didn't in my
heart kind of goes halfsies across I'm
gonna stop talking about it people I'm
gonna stop talking about I'm just gonna
live with it
so we've cleaned up to here and so we'll
go up some more and see what we can get
done the middle all looks pretty good
I've got to clean around those saucers
see how clean I can get that and then
we'll see after we get it all done we'll
see about painting some of that back
so we scrub scrub scrub scrub scrub
scrub scrub and got it pretty clean I'm
I'm pleasantly surprised I think it's in
better shape than I thought it was the
top up here is pretty good you've got a
little bit of pock marks here where
little pieces of purple came off I may
be able to do something about that you
got that little bit of planking still in
there and then this is the absolute
worst part right there but most of
that's purple too so a lot of that we'll
be able to touch up and get rid of
you can see how bad it is basically we
need to draw the dragon's head back in a
little bit and put some purple on it
that's gonna be the worst spot so that
will be the test but we're pretty much
ready for some paint so I'll go get some
paint no I'll go get a pink pin we're
gonna try to ink in the black first so
that we can tell where we need to paint
by numbers so I have got this cranberry
wine paint whenever you got something
that's close like this and it's like
different colors on the playfield cuz
it's faded different in different areas
usually you can make something like this
work so you can see what you think about
that I can't see the viewfinder to good
from here but that's what we got going
on there and then this is still a work
in progress I got to get my black lines
better but I ain't in the you know the
missing part of the Dragons snout but
tried to make a couple circles around
that and then did the purple down to
about here and kind of blended it in
looks pretty good in my opinion and then
another thing I did was you can tell it
pretty good right there and see where
the that was all white before you can
take if it's if it's the wrong color or
if you just got lines somewhere you can
take a little bit of it and paint it on
it and then immediately wipe it off and
what it'll do is it'll take it all off
of everything except the part that was
white and you can do that over and over
and over again and it'll kind of build
it up a little bit and then they call it
like the smear technique it's another
thing that clay does on pin repair.com
looking pretty good we won't get it
perfect I did a bunch of it in through
here and it got a lot of it but I think
we're we're really getting getting there
I've got to repaint the yellow circle on
both of these so I'm gonna do that next
but I think my purple or my cranberry
cranberry sauce is looking pretty good
so let me let me get going on the yellow
and see if we can get the two saucers
looking pretty good and we'll be about
there okay folks so this is the player
of you you know as long as it looks good
from the player view you're good it's
not perfect but it was right so I think
that's very passable and I really like
how this turned out blended that right
in hmm that's some fine blending right
in work up there I'm not too worried
about this is still a little there's a
couple little spots on his tail and
stuff but you're not gonna see that we
can't make it a Cadillac people it was
meant to be a what's forcing a Cadillac
man Lincoln's alright Honda's are
dependable it ain't gonna be a Cadillac
people but if yeah it's more of like a
it's more of like a beauty
it's a Skylark it's not a caddy it's a
Skylark all right so we got I think
that's all the touch-up that we need to
do cuz I think it's gonna look pretty
sweet whenever we can stuff back on it
and again if you know even if I make
everything look perfect none of this
looks perfect so what am i doing you got
to know when to hold them and window
fold them alright so next we need to wax
wax why I need a clear coat a little bit
so I'm gonna just spot clear coat it so
what I'm gonna do is kind of mask off
the mylar part and just clear like
there's a little bit of areas that I
touched up you know and then wax the
crap out of it
so when you next see it it will be nice
and shiny I have a clear coated it and
then I have waxed wax wax wax wax and
got it nice and shiny you can see that's
you can see the lights reflecting off of
the back box on the mylar there and then
you can see they're also reflecting on
the
actual painted wood up there pretty good
so it all kind of blends in together
pretty good everything cleaned up
looks pretty good
got new bulbs in it of course we got to
do the three pop bumpers next so oh I
fixed a little kicker this one's still
good so I guess I'm going to cut the pop
bumpers out and we'll put new in so it
took everything off the bottom
underneath the pop bumpers so basically
you have to unsolder these to the wire
leads that go to the light socket and
then I took the two screws loosen the
top and you can pop the whole assembly
off so basically the reason that you
have to do that is because this skirt is
all chewed up and looks like crap so I'm
gonna replace all three of those and I
think for all of you modders out there I
think I'm gonna go with red the white
looks a little plain something to put
red ones on if I've got red once I
better I probably should have checked
before I said that if I have red ones
I'm gonna put red ones on it get new
ones on there and that'll make up for me
not putting LEDs anywhere and I also
they had power cord stuff like this
folks so this is the original power cord
that was soldered to the the line filter
there and at some point they had decided
to replace the cord so they cut it seven
inches in from the cabinet and had
soldered a new cord to the old one which
is pretty cool that they soldered it but
then they just wrapped it with tape and
I don't like doing that if I can help it
one of the pieces of tape had already
fallen off so I cut it and soldered it
to the line filter where it oughta be so
now it's more than continuous cord much
better
so I'll see if I got any red skirts I
put new red skirts on it get all that
back together and then we'll look at the
bottom when I put it back together
alright so we got the top things on and
these little these are the little legs
from the light bulb socket so they all
have little spots that they touch and
are soldered to to get their power so
you have to go back and solder those six
and then you can mount this back on
which attaches to the pipe bumper ring
which is what actually it pulls it in
and makes it pop so I've got us resolder
those back six back and then mount
everything back and then we'll look back
on the top and see how beautiful it
turned out okay folks we're getting
there we got the pipe bumper soldered
back in and we got new flipper plungers
installed and new sleeves you have to do
that because the old ones get all loose
as a goose look at the play in it so
whenever you hit the button it does that
before it moves the flipper screws you
all up and then these little nylon
sleeves caused all kinds of problems to
put a brand new one in if you can and
you can because they're only like 20
cents or something like that I think
they're 50 cents so we did that we
cleaned all the switches we clean the
flipper switches which were in pretty
good shape but we clean them anyway and
so let's look at the top let's uh let's
check out all the plastics and the
rubber rings so this is what our
playfield ended up looking like so far
now that all the plastics are back on it
looks great we have to order new
plastics for the pop bumper caps because
these ones are just pretty nasty
so burnt there so we're gonna get new
ones so they look nice and bright as
well order that new we go check out our
spinner that's cool this is a really fun
game so anyway I have to do instruction
cards for it actually have to order
pinball skills we ran out of pinball so
there's a captive one that goes right
there I'm going to put back in don't
ever use the old pin balls people if you
look at them real close you'll see they
got little spots of rust on them and
they just eat up a damn play field don't
do it get new ones you don't have to get
too shiny five-dollar ones or anything
like that just get a new pinball oh and
you may not notice but on the coin door
this coin door we actually pulled off of
I think it was a Star Trek that we were
working on months ago and we we swapped
it because we needed a nice coin door
for the starter the Star Trek and the
reason that we swapped it if you rewind
back in the video it's because somebody
had pried open this hole down here
trying to get quarters out of it so this
was all been out and looked all screwed
up and we're going to swap the coin door
[Music]
so I took everything off the back of it
and I laid it flat on a piece of steel
and I beat the hell out of it with a
hammer and it smashed it back flat so I
put it on that side and beat this side
and put it on this side and beat that
side you can buy a new skin for that but
hey if it's an opportunity to beat
something up with a hammer why not right
so I beat it back straight with a hammer
so that turned out pretty good alright
so thanks that we have to do left ok I
have to get pin balls I have to get pop
bumper caps we have to clean the cabinet
it's in bad filthy shape but good I mean
it'll look great once we clean it we're
going to paint this frame around where
the back glass clothes black you could
you could repaint it the original you
have to paint it this looks like crap
you could you could try to match that
yellow it's hard to match yellow people
so we're just gonna paint in black which
makes them look really cool and it makes
it look like the the that glasses frame
so we like doing that so I need to do
that I need to paint some legs and put
on it and then some other little minor
things and then I'll come back and show
you how it turned out and we'll play it
a little bit
all right so we finished it ups looking
pretty good plays pretty good too I'll
play it here just for a second here in a
minute
hit the coin dart looking pretty good
put a little logo back on it these
actually the lost world was the first
solid state from Bali and I don't think
they actually had the logo yet
I think the first four games or so if
you look at the Flyers don't have the
sticker on it but I wasn't around back
then so I don't know that for sure
painted the rim on a put the back glass
back in the back glass had a little bit
of flaking but we hit it with the triple
thick and it all went back together
pretty nice we didn't do any touch-up
paint
we got her pop bumper caps on of course
got the glass on all looks pretty good
painted some legs got them on new leg
bolts put our little instruction cards
in that's another thing this is blue but
it originally was actually purple
it's just evenly faded with everything
back on it I think it looks pretty good
folks really came out pretty nice in my
opinion considering where every started
pretty nice so I'll set up the tripod
turn the lights on we'll play it just a
little bit but I've already done a video
of a lost world where we went all
through it checked everything out the
weirdest part of a lost world is over
here there is a woman standing here with
her arms up holding a child that a snake
is eating
it's very weird people I hope that ain't
what it looks like somebody asked Paul
Ferris what the hell that means
[Music]
[Music]
all right folks so there you go turned
out pretty good place pretty good saved
another one hope you enjoyed the videos
if you want to see us playing it longer
go check out our channel we filmed a
whole bunch of footage of us playing our
last lost world
we've had several it's one of our
favorites of the early bali solid states
so leave your comments below give us a
thumbs up for taking the trouble to film
it for you and make sure to subscribe to
us do you know that only 15% of the
people that watch our videos are
actually subscribed to us can you
believe that what are you people doing
out there those are rookie numbers
people we need to get our we need to get
our subscriber we're a way up tell you
tell your friends tell you tell your
family so leave your comments below make
sure to subscribe to us you can also
check out all of the games that we
always have available for sale on our
website go to lions arcade dot-com where
this one is up because it's now for sale
or you can stop by and see us we're in
downtown Rock Hill South Carolina we've
got a building full of arcade games and
stuff that we're always working on
whatever we filmed these videos so if
you can't come by and you don't want to
buy one just subscribe to us and it'll
let you know every time we put up a
video of one of these old games that
we're working on which is a couple times
a week so leave your comments below give
us a thumbs up and we'll see you on the
next video