Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool pinball repair video for today if
you've been watching our other videos
we've been working hard and diligently
on this future spa pinball machine if
you saw the very first video this thing
was destroyed when we got it in I mean
absolutely destroyed it looked like it
had been in a fire and it'd been
horribly repainted which we've done a
little better job of but it's had all
kinds of issues it had game board
problems it had smoke all up inside the
inside of the back glass the the back
box the back glass was falling apart
none of the board's worked right so if
you haven't been watching where in the
world have you been you've missed out on
so much but if you look below I've got a
little link where it shows all the other
videos that we've done on it so far so
we are onto our next video wanted so on
this next video we have to tackle this
huge play field this is a wide-body they
may have even referred to these as super
wide bodies look at this thing it is
thick look at the playfield
it's got crap all over it and it's all
dirty but it's not really worn I think
this thing is gonna clean up pretty good
my main concern is trying to get the
hair off this girl's legs that's the
only thing about pinball machines where
they've got like people want them they
get this ball wear on them we'll leave
it alone but anyway so I gotta clean it
all up and we're going to we're gonna
try to get everything looking good so
the very first thing that I'm gonna do
is we're going to set up a tripod and
I'm going to film us taking everything
off of the playfield then we'll play it
back in super high speeds like y'all
like basically I'm just gonna unscrew
everything remember not everything but
most of the stuff off the playfield that
needs to be cleaned and we're gonna set
it over here on another plate filled
glass not one of these because they're
working by the way if you ever working
on a game don't set the stuff one
you're working game put it on another
broke one if you got it
I don't ever put it on the floor because
little people will step on it but we're
gonna swap it all around and look at
this little addition that they did one
of the drop targets broke I guess the
first one so they put the drop target
from Playboy in it which wasn't a bad
choice really considering the theme but
yeah so that's next so we're gonna take
all this stuff off and I should say in
this video I've mentioned other ones but
I should say it right at the beginning
sometimes whenever we do this we do it
with the lights on just so it looks good
for the video if you're doing this at
your house don't leave the lights on
because if you if you if you screw up
and connect the lights to a solenoid or
something you're gonna or the switch
matrix or something you're gonna screw
something up on one of the game boards
which we can fix it's not really that
big of a deal to us because we've worked
on them all the time but if you're a if
you're a home owner and you're doing it
in your house even if it even if it
shorts out you know the the PIAA chip
and that does the switch matrix or
something like that
it's gonna cause you all kinds of
trouble trying to track down the chip
and figure out you know exactly what to
put in and cost you an extra shipping
charge and all that so it's better to do
them with the lights off but we often do
them with the lights on just so it looks
better for the video so I'll set up the
tripod we'll work on a little bit when I
got something in mind for this look at
this it's bad I mean it's the paint's
flaking off it's bad it's really bad but
I got I got a solution in mind so we'll
talk about that here later but the first
thing we're gonna do take everything off
of the playfield
[Music]
[Music]
[Music]
[Music]
[Music]
oh right we'll let the music fade out
okay so this is what we are starting
with now if you don't mess with these
much I'll tell you my opinion my opinion
this thing is in excellent shape in my
opinion I would use the word excellent
now the ball where on her legs and I'm
not trying to be sexist saying that I'm
just saying look it's a half-naked woman
you're seeing her legs and there's ball
where or it doesn't look right so we're
gonna try to get to have to look a
little better but that's about it
there's nothing else really on the
entire play field that has even minor
problems you know I mean you've got if
you want a nitpick I mean there's like
that little little thing there this is
from 1979 the truth is it probably just
wasn't played that much that's just best
probably the truth now on these games
you can't really tell how much they were
played except just you know physically
checking them out because there's no
meter the meter was handled by the
bookkeeping on the game board and they
are you know that battery held that so
as soon as that battery died you no
longer know how many times the games
have been played and that can be reset
too so that could have been reset before
then too so but yeah I think it's in
fantastic shape it's filthy and there's
a little bit of stuff here in there but
this is gonna clean up great imagine
this with nice wax on it and shining and
the lights glowing off of it a little
something going on there
maybe hopefully this won't get much
worse when I go to clean it now that's a
little bit of where there that's not
perfect a little line there and then
right there
so hopefully this won't get much worse
when I go and hit it with the Magic
Eraser but I stand by my excellent I
think this looks great for 1979 it looks
fantastic and it's gonna clean up very
very well so I'm gonna hit it with the
vacuum I'm gonna take a magic eraser and
kind of go at it maybe well I'll show
you when we're doing the leg part a
little bit see if we can get that
looking a little better and the thing
with that too is you don't have to get
it perfect now there this is a there's a
mile art circle here so you will see a
little different see how that skin tone
is a little different than here because
this is just it's dirtier and it's faded
I guess under the my lawyer didn't fade
it as much but you see that a lot but so
we don't have to get it perfect if we
can just lighten this up a little bit or
it's not quite so obvious it'll look
great so yeah okay so now that you've
seen that I'm going to show you a little
secret okay so while we've been filming
this video we picked up a couple more
machines now we've got a bunch of
pinball machines but most of them are in
storage we've had them for a while and
every once a while we bring one in like
you know we brought this one in get it
done but check out what we got just the
other day look at this the champ is back
what a great game but they put the wrong
legs on it look at this so we got this
one too Bally Midway X's and O's which
we will be doing a video on as we clean
it all up and everything and then we got
fire power which is a fantastic game one
of my favorites but look they put the
wrong legs on it now depending on which
game you have you've got different legs
that it needs so most games take 28 and
a half inch legs so that's what these
are and so it comes up a little bit
below my waist I'm some six foot one
so this one should be at the same height
but it's lower
I would guesstimate it's an inch and a
half lower because those are probably 27
inch legs the wonder if I've got a tape
measure
27 inch legs I just guess because
there's only about three sizes of legs
so these are Gottlob legs
so then the doclet machines with a Blanc
with a tall body take 27 inch legs Bally
machines take 28 and a half inch legs
and then the got lips that are like
wedge heads see how that's a thinner
body it takes 31 inch legs but you can
see with the with the right legs on them
all of the lockdown bars should be at
about the same height a little different
because I have the little feet are and
stuff but in general they should be at
about the same height so they put the
wrong legs on it but we'll get it up and
up in the air how it's supposed to be
that glass is in decent shape needs a
little work and the playfield is in good
shape
so we'll be doing that one in the future
look for those videos coming up but back
the future spa so I'll clean it up
we'll start hitting it with the magic
eraser see how clean we can get it and
then there'll be nothing left to do but
wax it so let's see what we can do about
those hairy legs
[Music]
[Music]
[Music]
this is what we ended up with so it
leaves that the Magic Eraser leaves this
haze all over everything you see there's
a lot more of it on the bottom of the
play field because at the top there
wasn't all that much where anywhere so I
didn't have to really go over it with
the Magic Eraser I was able to just wipe
off the lot of the dirt and stuff you do
end up with the ball trail coming up
through here leaves a mark we've got
almost pretty much all of that go home
everything cleaned up pretty good the
biggest the biggest area that is
anything that you would ever even notice
was right here on our leg and right here
honor like all of this pretty much
cleaned up this still has a little bit
of wear on it but I believe it's gonna
clean up and wax up really nice so we
will see right so next step is I'm going
to wipe all of the haze off which you
can do just you know basically just use
a 409 or or Windex or anything like that
but you don't want to you don't want to
spray anything right on the playfield
because it'll you don't really want the
water to soak into the the wood but
we're gonna wipe it down with a damp
towel get it all cleaned up and then
we're gonna wax wax wax wax wax wax wax
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
it is really starting to come together
look at it it's so beautiful now look
when the light hits this is the best
part after you fixed one look at this I
think I got a pretty good little shot in
there earlier of taking the haze off the
wax man that's like really cool whenever
you do that so there was a couple things
I forgot to mention earlier I forgot to
talk about the magic eraser so there is
a product called magically right if you
already know all this just ignore the
pedantic nature of this next part of the
little video but there is this product
called magic eraser that is basically a
really small foam see if I've got one
here
so basically it's a piece of foam that's
really it has really tiny fibers so
basically it's like sandpaper
very light sandpaper like 2,000 grit
sandpaper or something like that or it
has basically the same effect of it so
it people figured out a while back that
its effect it's really effective at
cleaning up play fields because the
problem that you run into and again look
how look how this turned out from up
here it looks good now if I get real
close to this it's gonna look it's gonna
look bad because I'm amplifying it
you're really close to it but just keep
in mind this is where you're playing
from it looks fine looks great right and
if the light hits it it looks great
see but if you get close some of those
some of those some of that ball where is
still there and the reason that is
called ball where see how it's all
little circular it sounds a little
circular yeah there you go see it those
are little tiny cracks that are in the
paint that the ball the spirit the
sphere of the ball has ground all those
into and they're everywhere it's just
you can see them really good because
it's a skin tone it's really light and
then again I'm not trying to be sexist
but if you've got a pie filled with a
naked woman on it that's the first thing
anybody that walks up to its gonna look
at whether you're 5 or 80 you know what
I mean
so my whole point is that's the first
thing you're gonna look at is this naked
half naked woman on the play field so
you any kind of where there it really
shows and it doesn't look very good but
it doesn't have to be perfect so as you
can see it looks pretty good even though
it still has the wear there so why
didn't I take all of it off by keep
going with this magic eraser it's
because it's sandpaper so if I kept
going it would literally rub it down to
bare wood so I went as far as I could
and the paint was just starting to come
apart if you look it's hard to see see
how it's a little wider right there I
was starting to lose paint just bear
so I stopped that was as good as I could
get it so this stuff is great but you
got it you can just use it a little bit
you can't go crazy with it and it
cleaned it up really well now most
people they wouldn't even notice that
because it looks it looks really good so
I think it came out pretty good but just
don't if you use it just don't go crazy
with it if you if you go nuts on it it's
gonna you're gonna regret it because
there's really once that's worn away
you'll never get it back you can touch
it up like we've done before of it and
then the other thing is Oh two things
remember I was saying I thought it was
an excellent condition so there is a
little bit of where here if you let the
light hit it you can see it better see
the where there and that's right there
right by the girl's leg where you're
looking and then up here there was a
little bit of where here and there is a
little bit of where here and basically
what's happened there is that the
playfield if you look see that see that
crack in the playfield this is plywood
and the wood has splintered a little bit
so there's a there's vertical cracks and
the playfield here and there some people
that kind of stuff drives them crazy me
personally this is a 1979 vintage
pinball machine the rest of it's not
perfect we've already went over that in
the previous videos to me I think it may
even make the game look better to have
just a little tiny bit of wear now if
there was a big old spot where all the
paint's gone of course if we couldn't
clean up her legs any better and it just
looked disgusting of course so you know
it would it would really hurt the game
but just a little bit of wear here and
there it just makes it look more vintage
makes it look more you know it's it's 40
years old
and it looks 40 years old so yeah I
really like it I think it's coming out
really well so the next thing we've got
to put everything back on the playfield
and then we've got to test play it a
little bit but I think we I think we're
getting there I think it's starting to
look pretty good
everything wanted to cooperate
I fixed a few of the sockets before we
started tearing it apart to see that it
would look good for the video so all of
the lights are working everything's
doing its thing as you saw in the video
I put in the new bulbs and when I did a
couple of more dim twists of the socket
a little bit they brightened right up
I've got this drop target here it's
supposed to the front one is supposed to
be a star just like the other ones but
it's a little Playboy bunny I think I'm
just gonna believe it because it you
know isn't that kind of the appropriate
one for this theme right I ordered a new
one it's inside but I've got a
replacement star one but the more I
think about it I mean why replace it
somebody made that choice a long time
ago and it fits the theme of the game so
I think we'll just leave the Playboy
bunny so we're getting there all right
so I think it's came a long way if you
remember from the very first video this
thing was smoke damaged it looked like
crap right so to combat that we cleaned
up the cabinet a little bit we're
getting the playfield really nice now we
fixed up our back glass that had big big
chunks flaking off of it to where it
looks very presentable the back box had
been repainted so we repainted it back
the right color we didn't get the we
didn't get the design on it that it had
on it originally but we did get it the
right color pretty good match right and
it uh it looks nice and clean you've
seen the inside we got the inside all
nice and clean so I think we think we
might have saved this one right look at
the sheen on that that's awesome all
right so let's put it all back together
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
[Music]
so we got everything replaced and put
back on it it's looking pretty good
y'all okay so we have one major problem
left with a simple solution so the apron
was destroyed you saw that right all the
paint's flip all the paint's flaking off
and everything so there are two ways you
can fix that problem
they make decals so you can sand that
all down repaint it and then put a new
decal on the top of it if you watch one
of our Gottlob videos that we did a
while back we did that on I can't
remember which one that was
I was the Lariat you go look at the
Lariat pinball that we did we put a new
decal on the on the apron that ended up
looking really good so you can do that
so we could sand that all down and
repaint it the base color which is like
a burgundy and then put a decal on it
and the pinball rescue makes those
decals I think so we can do that and
maybe we will in the future but that's
not what we're gonna do on this one what
we're gonna do on this one is we're
going to replace it with this one so I
believe this is off of a Space Invaders
there were only about five of these big
super wide-body pinball machines that
Bally made in that time era and I guess
they all had different aprons so this
one's pretty rough but this one's pretty
nice chickened out pretty nice not
perfect but nice enough for this machine
and I think the color scheme will even
kind of work because it's basically just
black
so we'll try bolting that on and then
there's not much left folks mounted the
apron on I kind of like it what do you
think I think it looks just fine you'd
never know you would never know that
that's the wrong apron and look I got to
put my my yellow flipper rubbers on it
like I like I get so sick of them all
being red mm-hmm so these ones get to be
yellow because on the flyer they were
yellow I would never put yellow ones on
a red one or red ones on a yellow one
you got to go by the flyer so yeah I
think it came out pretty good everything
looks good so the only thing we have
left to do well we've got a few things
left to do I have to replace the
plungers on the flippers
I might adjust them a little bit we've
still got to clean it up a little bit
get it looking a little more presentable
we've got locks to put on it on the
front and on the back we've got to put
the glass clean the glass and put it
back on it I've got to test everything
make sure everything works right and
then we have to play it and like always
will definitely film us playing it but
this video is getting pretty long so
we'll wait till next time let's see if
it'll start them look at this you know I
thought I had a light bulb and just
touching it made the light bulb come
back on this video is getting pretty
long so we'll wait till next time let's
see if it'll start though look at this
you know I thought I had a light bulb
and just touching it made the light bulb
come back on look as I wounded myself
let's see if she'll do anything
ah it's trying
let's hit the flippers work they do
I bet the pop bumpers don't work this up
they do it's all looking pretty good
I've literally haven't even tried it yet
boys got some action I think we're
looking pretty good here people let's
say four drops I save our drops will
reset if I can hit it oh and I'll hit
the spinner we got to get a good spinner
shot
there we go all right what a cool little
game this thing is gonna be pretty
awesome we got our saucers the last
thing we got to check all right it's a
very cool game I like it a lot oh we
gotta check our kicker for our ball save
it's trying to cooperate check it out
all right so we'll do another video
after we get it all cleaned up and
everything ready and of us playing it
now if you're watching this video then
we've already shot that video because I
don't upload stuff when we're halfway
done if I'm uploading like repair videos
it's because I've already fixed it and
everything's done I would why would I
upload it if if we never finished it
that wouldn't work out very good y'all
would all think that I'm a hack if you
don't already
all right so leave your comments below
let us know what you thanks so far if
you've been watching from the very
beginning I think you would agree with
us that this is a we've done pretty good
here for saving one you know so give us
a thumbs up for taking the trouble to
film it for you look out for that next
video and leave your comments below let
us know what you think we will see you
on the next one future spy