Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool pinball repair video for you this
evening we have been working on this
awesome B Lost World pinball machine
that we bought in
pieces we had just the body of it the
Playfield is in the other room and uh
paint was really bad we didn't have the
correct head for it uh and in the first
video we pieced this thing back together
and put some artwork on it took us quite
a while to do that
we did a little bit here a little bit
there but now we have the whole thing
together right and then in the previous
video we worked on the missing
Transformer that we were able to Cobble
back together get it 100% test it all
out put it in the machine and now the
machine has power we turned on the power
and look what happened the lights came
on you know why because the machine
wants to come back it's tired of sitting
in somebody's warehouse for years these
things were built to to run baby they
weren't built to to sit around
okay so it's trying to cooperate for us
but here's our next problem we've got
nice side art on it's beautiful it's
getting there this is going to be a
great game but here's our next problem
first of all this is the wrong light
baffle we'll be we'll fix that here is
our power supply that we
made all the boards are
missing I don't even know for sure how
we're going to put the the um the since
this is the wrong head this is the this
is a head off of a Stern game that we
painted and decaled so it looks like a
Lost World game uh I don't even know how
we're going to hook up the soundboard
because it uses its own you know
connectors but we may have to just add
those into the harness but we'll figure
all that out as we get there whenever
you have a big problem like this and you
know this thing is a basket case what
you do is you work through it a little
bit at a time so we start at the wall
the power comes in goes to here goes to
a switch up here comes back and goes to
this we got the Transformer everything
correct right the next thing that it
does is it goes up here to a solenoid
board they call it right so I've got one
of those um that's repaired and ready to
go that I worked on a little while back
so that one we're not going to have to
do much with I can just pop it right in
but once we do that we need to check the
voltages on it so let me grab that and
mount it in the game and that'll be one
less board we have to mess
with all right so here's our first board
like I said I already had this one so
I'm cheating a little bit on this one
but you've seen us work on these plenty
of times this is the solenoid driver
board so all of these uh bottom half of
the board basically is responsible for
fixing the uh or for making the
solenoids work using signals that the
mpu board that'll end up over here sends
through these wires to trigger all of
those so that's all of your coils right
the top half of the board is split in
half this side takes 12 volts and turns
it into 5 volts the 5 volts is then used
to run all of the IC chips on this board
and then on the other boards too okay
and then this part up here takes the
high voltage which is about 240 volts
and turns it into about 190 volts
regulates it now we usually turn it down
a little bit we want it to be about 180
volts because uh if you do that you get
a little better life out of the displays
it's kind of a moot point because the uh
the displays are going to be l displays
I know everybody's cheering everybody
loves the LED displays they're cool I
don't have a problem with it so down
here on this board on the bottom our
power
supply our our high voltage is 248 volts
so that's getting sent up through this
over to this area and then it's getting
re uh not rectified
regulated down
to 179 volts perfect now if we put LEDs
in here though we're going to remove
that fuse to where this whole area
doesn't even do anything so it's not
that important but what is important is
this side of the board this create takes
the 12 volts and makes 5 volts so the 12
volts comes
in up here on this top test
point it shows you the voltage coming in
it's like 14 volts it's a little
Snappy and then below it is the voltage
going
out 5.1 volts that's perfect you want it
a little bit higher than five it's
designed that way just so that if
there's resistance in the lines or
you've got a bad ground because of rust
like that that we need to clean up um
the board will still get 5 volts right
if you're down to like 4.8 volts it'll
work but having 5.1 at the source is
really good
so we know this is doing what it's
supposed to do and we know this is doing
what it's supposed to do we don't know
about all these yet but I kind of
cheated like I said and took this uh
tested this in another game so I already
know that it works so all of that's
going to be fine knock
on damaged plywood okay so our next
board we are up to the
mpu but I've got a cheater mpu too that
we can use uh uh to to see if we can get
lamps blinking we don't have any
displays in but we have these computer
controlled lamps that are dead right a
couple of those should blink um even
without the displays and without the
play field so let me see if I can get my
I've got an mpu that I've repaired in
the past too that we'll use just to test
with uh before we make uh the mpu that's
going to stay in this game let me grab
it all right so I have this board that's
been in my case over here for quite a
while that somebody with the initials of
RL says works 100% June 13th
2018 I have no idea what game that goes
to but we'll see if that thing wants to
start
up
one 2 three four five 6
7 it appears to have booted now it's
hard to tell if you don't have any lamps
in it
but I went ahead and put some displays
in
it and the displays are actually working
the flickering you're seeing is an
artifact of the camera okay so uh I've
got a test board in it again I don't
know what game those ROMs are for but
they're all the displays are all the
same on most of the uh the valet stuff
so it looks like the board's booting
let's see if we can find a lamp driver
board to slide in it and see if we can
get the lamps to Blink too without the
Playfield been installed
yet so I found this in my stash we have
Parts all over the place um you pick up
games and they have a couple extra
boards with them or you get a box of
stuff from an operator that you're
getting some games from or
whatever so I don't know where this came
from but it looks pretty
complete looks
good so I went and resered all of the
connections this is usually the worst
part of the uh lamp driver boards you
get bad connections on these nice new
solder on all of that and
so we'll try that in the machine and see
if it'll make any of the lights light
up all right so I've got it just
temporarily mounted in there and we
don't have the two connectors on the
right because those come from the
Playfield which isn't in the game this
is the connector that the power and the
signals come in on and this is the
connector that lights up the uh back box
so
let's see if it wants to
cooperate
uhhuh so these are computer controlled
that one that
one that
one
um it's on free
play well wait I don't know if it's on
free play
H they're not blinking let's see if we
can go into test
mode oh there we
go it may be that they're that they're
um it's a ROM for an early game which
didn't have an attract mode the first
few b games didn't have an attract
mode uh okay so the computer controlled
lamps are working the general
illumination is working the displays are
working of course we're going to put LED
displays in it and the uh mpu our little
test mpu is working we don't know what
game it's playing so you know what time
it is it's time to slide the Playfield
in and see if it will fire the coils
um we can go into the test mode and do
that we can't really play it because
again we don't know what ROMs are in it
we'll have to burn some new ROMs before
we do that but we can go ahead and Slide
the Playfield in and see what
happens all right we slid the coin door
back on it we slid the Playfield back in
it let's see if we get our lights on the
Playfield got our general
illumination yep I saw some computer
controlled lamps now we haven't done
anything to the Playfield so all the
half the bulbs are burned out
probably uh but you know we're just
trying to test it and see if in general
we got a good starting point this thing
was completely parted out
yeah that's all of the bulbs that are
left but the back box now I don't know
if I mentioned in this video this is the
wrong panel because this is off of a uh
Stingray so it we have to remake that
whole panel but we'll do that so uh
yeah so the computer controll lamps at
least most of them are working on the
Playfield got the display one we're
going to do LED displays now here's the
one I'm curious about the solenoids
let's see if our solenoids are
working looks like most of them are
working you hear the knocker there's two
knockers in this game because of the way
it's
wired listen
so the the B cabinet has a knocker in
the bottom the same wiring has a knocker
in the top on a on a Stern so they're
both
hitting okay so uh this one isn't
working but that's cuz the wire's
disconnected but um all right so our
next thing we're going to
do we've basically tested everything so
we kind of know that we're our idea is
working here so what I'm do now is we
need to make this mpu into a lost world
but I'll tell you what I want to do I'm
going to save that board because that's
our test board we just use it to make
sure everything's working and things and
I like having one that I know Works
laying around right so we're going to
save that one I'll fix another one to
put in here and I'll burn new ROMs for
it uh so that we know that it's a b Lost
World um I can go ahead and screw down
the solenoid driver board because
they're all working uh and then once we
get it up and playing you know the lamps
are all different on each game so we
don't know what ROMs are on that but uh
once we get it up in with the Lost World
ROMs we can test all the lamps finish up
the lamp driver board and go from there
so let me dig around and see if I can
find a mpu that I can rebuild all right
folks so I have actually if you watched
our we did a video a while back where we
rebuilt a board for Rodney and we were
able to handle that a different way send
them a different board um because it
took me a while to fully test that thing
but so we'll put that one in this
machine so we've got all of that
straightened out and we've got it up
where it's in lamp test all the lamps
that blink that are computer controlled
in the back box are working fine but
this Playfield is destroyed man man it's
destroyed so what I want to do is um go
ahead and lift up the Playfield and then
carefully go through and replace all the
light bulbs and uh we should get it to
where every bulb is working underneath
the Playfield which will at least test
that lamp driver board since we're going
through and we're doing the the boards
first of course this Playfield is going
to need extreme work to it I don't even
know what we're going to do yet because
there's myar all over the place we'll
probably end up trying to paint around
the
myar um but I don't know we'll see first
thing we would have to do is clean it
but I'm going to just focus on the lamps
right now whenever you have a huge
project like this you just got to do
them things
you know a little bit at a time just do
them in order um whatever order you pick
now keep in mind that this back board is
from the wrong game because it's from a
sea witch so we'll be swapping that out
at some point and making a brand new one
but I'm going to lift up the Playfield
and then slowly go through and clean
each light bulb insert and replace each
bulb so that we can see if all of them
work or if the lamp driver Board needs
some work so here's the bottom of the
Playfield it actually doesn't look that
bad it's just been sitting around a long
time who knows when the last time this
thing was powered up
was uh but it appears to be
complete so like I said one of the first
things we're going to do we're just
going to go
through and by the way that's kind of
the way to that you have to do it you
just have to bend the sockets back
out pull out the bulb clean in here
and then put a new bulb in so I just go
through carefully check them as I go I
usually do it with the lights on
blinking but you got to be careful
because if like for instance if you did
it here and you shorted this light
voltage to the switch voltage it might
cause all kinds of issues
so that's what we do is repair stuff
though so it's not that big of a deal to
us we could fix it but if you're
particularly worried about screwing
yours up you might want to do it with
the lights with the uh Power turned off
all right I made a list of all of the
ones that would not light up after I
cleaned the sockets and replaced the
bulbs and almost all of them are on this
bottom connector and if you look at the
connector see those shiny pins those are
the ones that I have just replaced and
you can see how bad the other ones look
so I pulled one
out look at that compared to the the new
one so that's why the light's not
working out I mean the light is not
lighting up the electricity will not go
through
that so we're going to clean that up and
uh repin it and we'll see if we can get
them all working that way really people
go through and replace every pen in the
game I've repinned this one which is the
most important one you can if you want
if you want to take the time to do it
but um you kind of need to do them a
little at a time just to make sure you
don't introduce a whole bunch of
problems into the game if you go through
and repin everything before you start
sure enough you're going to miss three
or four of them and screw it up or
something and then it'll be really hard
to track down which ones um need
repinned or need repaired so uh but I'm
going to go through and do this
connector and make sure everything stays
in the correct place and then we'll see
if that gets our bulbs working so that
seems to have done the trick look how
horrible this Playfield is though oh my
Lord now I know what you're thinking but
Ronnie the back thing is going to be
completely different how do you know
that all of the ones work that are going
to be on the Lost World well it's
because they're all the same so on any
back glass a BAL or a Stern you've got
the four uh score displays and then
you've got the ball and play display and
then you've got player one up player two
up player three up player four up and
then you've got one comp playay two comp
Play Three Can Play Four can playay and
then you've got this might be game over
and this might might be same player
shoots again and this might be free ball
they all it's all the same stuff all
right okay so we got all of the lamps
working I think that's going to be cool
so think about what we've accomplished
here we got the cabinet art on it
looking
fantastic we got the uh power supply
rebuilt was completely missing from the
machine had it on my shelf I've been
saving it for years I got it back in the
machine where it needs to be bam we're
parting them back in baby got that done
and then uh we got a solenoid driver
board rebuilt put back in there Wham the
thing works great and then on top of
that we got the mpu working I can't
believe it and now we're up to the
landboard even
works I'm almost exhausted it's so
exciting okay so next up is the the
displays actually and so we've got some
of the um some of the uh brand new
LED displays that we are going to put in
it and then after that we're going to do
our own we're going to do a full video
on our buddy
gto's Lost World um soundboard that he
has created from scratch that's right
the guys build them brand new
soundboards for these okay so uh next up
though would be displays all right folks
it is display time so this
says b Stern five time six-digit Display
Kit this is from
Wolfpack um Tech Wolfpack Tech and we
got the red ones for this beautiful Lost
World let's see what we got in
here wolf pack Technologies these are my
favorite ones to make they're also very
inexpensive um comp comparably
comparably here is their website wolf
pack Tech I paid for the they did not
give them to me this is not a commercial
I'm just telling you it's good
stuff uh when assembled this display
will replace the B Stern six-digit
display used on many solid state pinball
machines from 1977 to
1986 ours is from like 77 or 78 or 79
somewhere in through there for the
complete list of compatible machines see
the list at the end of the
instructions all right so it's very
simple it shows you right here where
everything
goes and you just build the thing you
can download the instructions on their
website we've done about three videos on
these already so I'm just going to start
making them and show you what I come up
with but I'm going to show you the parts
first so there are five little bags of
Parts okay and each
bag has a couple well several
connectors and three IC
chips and then there are five little
sets of boards they're two-part boards
where the displays actually come off of
the the
um the connector you can take the front
of the display off now why would you
want to do that well they're just trying
to simulate that L bracket shape of the
original display that it fits right in
there right it works really well it's
just a cool setup so we have five sets
of those cuz we need five displays four
for the scores and one for the ball in
play and credit display and then here
are all the little LED
modules now these have a little
protective piece of plastic over them
you got to peel that off makes them look
better okay these should like up
red so uh I'm going to start building
one and I'll show you as I go along all
right folks I got the first part of it
done took about 25 minutes the
connector the three IC chips the two
caps the two dodes the resistor and then
the two connectors up there
so so far so good that one went kind of
slow I'll see if I can speed it up all
right so that part only took 15 minutes
you got to try to get the little LEDs
straight though sometimes they'll kind
of you know there's a little bit of play
in the holes that they mount in so I'm
going to count how many solder joints
that is just so you'll know all right
that's with the mask on it just presses
on there it's like foam and there are
220 solder joints on each display so
that's basically how long it's going to
take you to do it however long it takes
you to do 220 solder joints so I'm going
to pop that one in and see if it works
I'll bet it does and then we'll build
the other
four all right folks we got them all
made the quickest I could do one was 19
minutes for the whole uh display that uh
pulsing you're seeing your eye can't see
just the camera um so we've got all of
the electronics with the exception of
the soundboard done like I said we're
going to do GTO soundboard but we're
going to do that last CU I want to be
able to show off all the sounds it can
make and we can't play it right now
because it's play Field's so rough so uh
you'll have to join us next time when we
will work on the Playfield I'm going to
have Joe clean it all up and then we're
going to repaint in all of this screwed
up paint it's going to be a heck of a
undertaking but we'll do that so I think
El electronically we've got it pretty
much doing its thing now people the
whole point of this is we're parting
them back in don't part them out Joe
should they part them out no don't part
them out part them in all right so make
sure to watch my brother Donnie's
Channel on YouTube it's down here below
the link is below us we work on arcade
games pinball machines and jukeboxes my
brother Donnie works on Old buildings
old cars things like that I'm over there
with them a lot so we will see you on
the next video but heyy if you like
these old B pinball machines here's
another video you can check out we'll
see you on the next one