Somebody Lied And Sold Me A Broke 1978 Fisher Price Record Player!

Amateur Repair Time
257 followers
2 Video Views·Feb 15, 2025
We're trying to keep some of the vintage electronics out of the landfill. Many times when something stops working, it can be repaired if someone will simply take the time to attempt to repair it. This channel documents our amateur attempts at repairing vintage electronics we think are cool.
We don't typically restore anything, we're just trying to get them working again. We've found that most of this stuff was well built and with a little help will start doing what it was intended to do.
Radio Repair
Phonograph Repair
Clock Repair
Projector Repair
ladies and gentlemen this is Joe's
classic video games back with another
cool Fisher
Price record
player video for you this evening um I
have a collection of stuff here that
we're going to mess
with I was at the thrift store earlier
today and they had one of these Fisher
Price record players now when I was a
kid I never had one of these I never saw
it I don't remember them but I've seen
them over the years and I always
thought that's kind of interesting um
it's it's kind of like
a
uh you know an electronic device that
appears to be aimed at kids it's just
strange you know that that they would
make a record player a real record
player aimed at kids so
I noticed that you can't pull this way
up so I was thinking you know you'd
think they'd break the needle and like
when I was a kid I would beat these
things up if I had
one but anyway so um like I said I never
had one when I was a kid I did see at a
thrift store a while back a tape player
made by Fisher Price very similar to
this but it has a you can put a cassette
tape in it but they wanted like $25 for
it or something side decided not to get
it I might get one in the future if I
find one a good deal on one but anyway I
picked up a record player one of these
Fisher Price record players now just so
you know I am not a big um audio guy so
I would
imagine that when these things work they
don't sound good at
all
um but that doesn't really matter to me
the reason I wanted to get it was
because I just liked how it looked I
thought it it it's just it's just
interesting that they made a kids record
player and I think it's a you know I
like these little portable record
players I think they're neat and so I
saw it it was 10 bucks you know it's
probably from I would
guess early 80s maybe maybe late
70s
um so uh I bought the thing
so I um I brought it home
and I was doing some
painting and I thought you know what
let's paint some stuff and I'll put on
the record player now look I got all
these radios and stuff but I thought you
know I'll put on I'll put on a record
player and I put a record on and while I
paint and it'll make it go quicker and
it'll be fun cuz I got a whole bunch of
Records I've been trying to listen to so
I got
out my occasions
record do you know about the occasion
the
occasions had this song called girl
Watchers so I've heard this song a
million times all through my life right
I was at the flea market a while back
and I saw this record look at this album
cover can you believe this I mean you'd
get arrested if you tried
to if you tried to make this album
now so anyway so I got out the I got out
the uh
record I got and I was listening to a
Merl Haggard record too and
uh I put it on
the the officier price record player
which says
Works $10 so I bought it at the thrift
store earlier today it works it's $10
that's why I bought it it don't work
they don't know what works means so it's
actually this one right so I've got two
I've got two of them here so at the
thrift store earlier today I got this it
says Works $10 let me open it
up
right so that one don't
work so you might wonder well where did
this one come from
I I popped the record on this one and it
spins but you don't get any kind of
amplification at all I'll show you here
in a
second
um and I mean there is what passes for a
needle on the
thing or I
guess you hear it you hear the music
it's just not Amplified so we're going
to try to mess with that so they don't
know what works
means like I guess they just saw it
spinning and they said it works but they
didn't even test the needle you know if
you rub the needle a little bit it
should make a little noise so it doesn't
work so I could take it back and get my
$10 back but I think I'm just going to
fix it right so then I started thinking
remember I'm painting so I need to I
need some to listen to something and I
start
thinking
didn't I get one of these like a long
time ago so I go
looking and I find this one that I've
had apparently for about 15 years
sitting around the house and it's the
exact same one I mean it's the same
color and everything I think there's
different colors but maybe not so I
pluged this one in and it don't really
work either so but we're going to we're
going to play it just a second here so
what happened was when I plugged it in I
put it on 33 and it was too slow
so it's you know it's been sitting like
I said I've had it for probably 15 years
and I've never even plugged it in till
today right so I plugged when I put them
on
33 it wasn't moving fast
[Music]
[Laughter]
[Music]
enough
[Laughter]
[Music]
so when I first when I first plugged it
in it's making this horrible
humming from the motor and it was
playing so slow I was playing a Merl
Haggard record earlier too Merl was
going um
big
city let turn me Lo
so real slow right so I turned it down
so I didn't have to hear it and I let it
run for about 5
minutes and it the speed fixed itself so
I guess something is messed up so we're
going to figure that out too I'm GNA
take both of these suckers apart
right so this one it plays now and it
amplifies but it sounds like
crap
[Music]
one
get one will
not so if if this uh if if during this
video any of the audio just disappears
for a while it's because they started
complaining and I had to um mute it you
know the powers that be don't like you
playing playing
[Music]
[Applause]
[Music]
music so it it works but it doesn't
sound very good and the 45 appears to
work right so
we'll test that too um these labels I
need to glue back on so I think I'll use
some of my good
German uh uh craft glue on that and I
want to see why why it's humming I want
to look at how the turntable actually
turns because it was moving really slow
and now it's moving fine so I don't know
something going on there and then this
one here doesn't amplify at all let me
uh let me get the cord out from
underneath that one I'll plug it in and
show you what this one's doing okay so
this is the one that I got
today
that's
whoa that that's
uh
Works same loud
[Music]
rumbling
so is that just the needle or is
that yeah see that's just the
needle so we're we're just picking up
the noise from the needle so I don't
think it's amplifying at all um so we'll
see if we can fix it some what I was
going to say is I'm not real picky about
how good the quality is on a record
player so you know I'm not saying I'm
going to use this as my personal record
player for the rest of my life I'm just
saying uh if the thing's not you know a
great sounding record player and if the
weight of that arm is so heavy it's
going to scratch the records I don't
really you know I'm probably going to
listen to this record two or three times
and then never listen to it again
but
um I I'm I can't even really tell if the
quality is better or worse however that
one that's working it doesn't really
sound very good at all so I don't know
if that's just because it's such a
crappy record player that it never
sounded good at all or if uh you know a
cap kit might help it so that's what I'm
going to try to figure out so all right
so this one's completely dead we might
get lucky and there's like a wire broke
or
something so I think what we do is Maybe
we take this one apart first what do you
think so I'll put the record up and
we'll uh let me see if I can figure out
how to get into the thing all right so
on the
bottom
um somewhere I just saw a
copyright yeah
1978 um and it appears to
have security screws that's kind of
weird h i see those on arcade game stuff
all the time but I wouldn't think they'd
put it on consumer electronics but maybe
since it's was a kids toy they didn't
want kids getting in there or something
I don't know okay so let me see if I've
got anything that can take that out it
looks like it's a three slot a
tri-wing um screwdriver so I'll see if I
can take those
out well it's been about three days
look at these freaking screws now
apparently everybody probably already
knew about this but I did not know about
this do you see our
problem there's nothing that fits that
head like
it's it's raised in the
middle and there's a little point in the
middle and then there's three Wings on
the
side it's not your
typical
three-way there you go that's pretty
good look they're even sloped so they
slope to a point in the middle
and it's three not four so it's like a
it's like a Phillips
screwdriver but with
three there that's a perfect view of it
but with three
blades and it's
inverted so I've never seen anything
like that before
so I got out my security bit set and
this was the only thing that's inverted
in the enre set so if you mess with this
long
enough if you slide this down in there
you can grab two of those
prongs and then I used a little hand
thing and also this slid down in the
body so far that only a little bit of it
was sticking
out so if you put it in a socket the
problem you get is it just goes way up
in the socket and won't turn right so I
put
some stuff some Little Fibers from the
carpet I'm installing carpet so I put
some Little Fibers from the new carpet
in there to fill up about half of the
socket so only the very end of it is it
open and then I messed with it and
messed with it and messed with it and
messed with it and I got all four of
them out
so now I don't
know what it looks like in there or how
it even comes
apart we're upside down let me see if I
can get the bottom to pop off of it
watch there be a couple more there are
aren't
there oh
no I'll be back in two
days I got you
sucker Okay
so
you know we work on arcade games so
we've got all kinds of security bit sets
so this is in most of your security bit
sets it's a
triwing
bit this doesn't fit much there's you
will hardly ever use
this like I said we work on arcade games
all the
time I don't know if I've ever used this
now if you've got a really small one of
these it does take apart some of the
Nintendo Game Boy stuff but I honestly
don't know what they use these in not
much but Joey is uh you know he uses a
Dremel all the time so I had
Joey take one of these and invert
it with a Dremel cut it back so that it
will
fit
that crazy head on the screws okay and
then I also I used one of our long sets
we've got a couple sets that have these
long ones so this was that same piece
this was a
triwing and Joey went to town on it with
a
Dremel and just turned the point you
know
inside and and that works perfect so I
will save
that and uh won't have any problems in
the future now interestingly enough oh I
I got one of the smaller bits stuck in
there while I was trying to mess with it
so I messed it up a little bit there but
interestingly enough look at these marks
on the outside that's
from I guess the
uh the cord being wrapped around it and
being being hot maybe you know that cord
wraps around
there um and I guess it got hot at some
point and started melting the plastic I
don't get that but so this is like
a strain relief I believe they call it
so if the kid pulls on
The Wire too
much it won't pop
part oh look we' got the same thing
going on
there look the plastic has
melted I don't know maybe it's made like
that but I don't I don't know why they
would make this like that CU you would
never line it up with
that you know what I mean like they
wouldn't mold it like that so that the
wire should lay perfectly in there I
mean it's it's it's not even even that
has to be something that melted and it's
it's it's nothing extra it's part of the
original casting so it's done it down
there
too all right so let me pop all that out
finally finally we've made it in
there okay so this one is the one that
has no amplification but you can
actually hear the
needle um picking up the
record and of course the turntable is
turning so um
H so it I guess that's
a that's that would be the turntable
motor
obviously it must
uh have some kind of ey bler wheel
that
H
interesting I don't
know I mean obviously this part is
working fine it's just
a I guess we can take that
loose okay
um
power is attached there but that must be
fine because again the turntable is
moving here is the pickup I suppose let
me
think uh
yeah so that must be the wires from the
pickup runs over to here
there is just a little speaker I guess
the speaker could be blown that could be
our
problem speaker looks
fine so I'm going to
carefully
I'm trying to see if the
uh the leads to the speakers seem fine
but we probably have to test it with a
multimeter to make
sure and then over
here we have what
constitutes our
amplifier not much to it
three
capacitors a
uh pretty nice
potentiometer two
resistors a ceramic capacitor and a
diode so what would our problem be
folks what is this
little what is this little amplifier
chip it is an LM
386 the top of that then the m
8524 is probably if I was going to guess
that's a date code it's the 24th week of
1985 now this thing says 78 on it but
that of course would be the the uh the
date of the patent probably um so it
very well could be that in 85 they were
still making them this thing's kind of
Evergreen isn't
it okay so we could have an open
capacitor the resistors look fine I'll
bet if we check those they're
fine um I'll bet the diode's
fine and the ceramic cap is probably
fine so if I was going to
guess we've probably just got a failure
of this
LM was it
384 386 this LM
386 I would guess that's defin the
problem that would just be my
guess
um of course the three electrolytics I
guess we could replace so I think what
I'll do is I'll replace the three
electrolytics and then I will
uh see if I've got a
lm386 I probably
do maybe we'll get lucky in it's bad
solder or something I don't think so
though
stuff like this when it's inside
something where you nobody's ever
touched it you're unlikely to have bad
solder just because it you know there's
no movement or
anything very cool so it didn't take
much for them to
uh to make this all
happen all right all right um I'm going
to take the motor off just so I can
see how that interfaces that's kind of
neat so the motor just has a small shaft
which means there's going to be some
kind of Idler Wheel Arrangement up on
the
top
um to change the
speeds well no not necessarily I guess
they could be controlling the speed of
the I'll bet I'll bet they're they're
somehow moving an idler will okay so
you've got
um different thicknesses on this shaft
so it could be that like The Idler Wheel
moves up or down to change the
RPMs but all of this looks fairly simple
now it's getting a lot of motor noise
whenever you whenever it's moving it's
going on the one that
amplifies um which could be these motor
mounts
and know so if you separated
that you might even be able to do it
with like electrical tape or something
to kind of isolate it a little bit but
all right so I'll put that back and then
um I think if we take this clip off the
whole turntable will come off and we can
see what the idler setup looks like so
the turntable just lifts right off once
you take that little clip off and I got
to tell you this thing has a bunch of
sticky residue on it
which is like dried
up grease or whatever it's very tacky
and sticky that's going to gum that all
up to where it runs too
slow so if you if we clean that and just
oil that shaft a little bit this thing
is going to work a lot better so if
yours is going too slow that's probably
the the
reason now the uh the little idler wheel
it's crazy how all this is plastic and
it works you know let me see if I
can show you the
wheel the wheel itself the
the ID of the
wheel is kind of it almost feels like
foam but it's stronger than that and
strangely there's
no maybe that's it yeah there it is see
The dimple in it right there right
there that's where
that's been pressed up against that
shaft while this thing hibernated for 25
years or what however long it
was it sat like that for probably
decades and it got a little dent in it
but I don't really care it's it'll have
a little warble at a certain place it'll
it'll speed up just slightly for a
second you
know but I don't really care okay so
we're off right now if I'm if I
move this lever that lever underneath
there is going to do something here so
we're off if I go to
33 Okay that's
33 so the reason it's not touching is
cuz the platter is not on if the platter
was on it would take up that Gap right
there
there and move that in to where it's
touching so that's 33 now 45 I'll bet
drops
down
yep so they just have it set up so that
there are two thicknesses of this shaft
the motor turns at the same
speed and depending
on um if it's down or up it changes the
speed now I would probably you you don't
want to
oil the edge of this rubber foam ring
it's a little bit kind of
uh it has like a texture to
it but you want that because if you
don't have that it'll slip against this
plastic platter which has no texture to
it so that'll help it
turn um I wouldn't oil this because it's
plastic on
plastic so there's nothing really there
that you can
oil um I wouldn't oil that you you would
want to oil the shaft of the motor like
any motor and you'd want to clean all
this up put a little oil in
there all of this is plastic though
except for maybe that pivot but I don't
think I'd oil any of that so I'm not
going to oil it I'm going to clean this
up start putting it back together and uh
I'm G see if I if I've got a LM
386 okay so the one that's completely
dead that it I was theorizing might be
the chip on here the little amp chip or
whatever you know what makes more sense
is that
the speaker
blown
and I don't have a good I've got a good
multimeter here but I don't have a good
set of test leads so but this is the
best I can get and it
appears that yeah that speaker is
blown this so I got this little crap
multimeter I'm at the house that's all I
had here right and um so I got out big
papa but I don't have any leads for it
so I got these little crappy leads off
of that
thing and I don't think that's the meter
I think it's the leads they just
junk might have to calibrate it but I
get no measurement at
all across the
uh across the
speaker so I think the speaker's bad
which would make a lot of sense if the
speaker open you wouldn't get a peep out
of it and that's what we got going on so
it's a 16
ohm and it's a uh one watt 16 ohm one
watt it appears to be 4 in wide so I
need a 4-in speaker that's 16 ohm and
one watt you can go higher
wattage because you know like a 5 watt
speaker will run on the one watt that
this little thing's putting out but what
I've kind of experienced in the past
is that if you do that it lowers the
volume of the speaker it seems to so if
it's a one watt speaker and you're
running it at one watt you're running it
kind of at full potential right but if
it's a five watt speaker and you're
running at a one
watt you have less volume at least
that's been my experience that could be
nonsense but that's what uh that's what
I remember from my car stereo days so I
guess I need to get a replacement
speaker for this one so that's first so
all of you people that don't like it
when I rant about China this cheap
freaking piece of crap from
China look I stole the leads off of it
so if
I it ain't the fluke it's the freaking
it's the freaking leads these little
tiny
leads have that much resistance in like
two
feet just junk
man
crap it's
crap by American look this thing here is
45 years
old still working good baby 45
years so I don't completely know how
that little tiny circuit is designed but
the LM
386 the
impedance of the speaker can be as low
as 4
[Music]
Ohms so I don't need to keep a 16 ohm
speaker they probably just used that
because that's what they had available
so I just need a 4in speaker that's a
couple Watts I might um up the wattage
just a little bit if I do go down so
I'll try to get maybe an 8 ohm that's a
two watt or something like
that
uh yeah so I think because I'm having
trouble finding a 16 ohm so I'm I'm G
see if I can buy like a 4 ohm or an 8
ohm and then we'll pop it in I mean the
worst it can do is burn up that little
chip who cares we can just put another
one in
there so one thing I was trying to
figure out that LM 386 will only run off
like 15 volts but the way this appears
to be wired is the power comes in here
to the
motor
um
I guess through a switch
first to the motor and then the motor
has a second winding on it I guess that
makes 10.5 volts and then that 10.5
volts is what's running
the LM
386 that's an interesting little design
and then there is a capacitor and a
resistor that can change the G gain the
gain is set on the thing at 20 but you
can set it up to
200 um by changing a resistor and a
capacitor it could be though that that's
why they've got this potentiometer on
here maybe it hooks to that
pin and works that
way yeah
look there's the wiper of the
potentiometer and it's connected to
pin
two so the wiper of the pot is connected
to pin
two pins three and four appear to be
ground pin
one this is
interesting pin three is probably the
source
voltage it's coming from
here huh what do you think so they're
using a diode to change the
AC into
DC coming in on pin three and if it's
10.5 Vols AC the diode's probably
popping that up a little bit so might be
12 or 13 volts DC I don't know how we
could ever figure that
out
um no I got the pins wrong one two three
four five six pin six pin six must be
the input
voltage uh pin 8 is a capacitor
connected between pin
one and
pin8 so there's a
capacitor
yeah so there's a capacitor between pin
one and pin8 I think that changes the
gain so if you messed around with that
value that might get you some more
volume
too and they've got
the they've got the um volume on pin
two and then one side of the volume is
connected
to
ground and the other
side is connected
[Music]
to a
resistor that runs
to uh the tone arm
okay so the input
is going
through yeah so the tone arm signal
comes in
here runs through a resistor and then
runs through the
potentiometer before it goes in pin
two look we're getting edicated so it
says it's internally the gain is
internally set to
20 but if you put a resistor or a
capacitor Cross Pin one and 8 it changes
it and then pin two is the input which
we
saw uh coming from the tone
arm and the the uh it runs through the
potentiometer before
that pin three and pin four they had
grounded pin five is the output to the
speaker pin six is the input voltage
like we were saying I didn't see if pin
seven was hooked up so I want to to see
what the we've got a
2.2 microfarad capacitor between 1 and
8 okay it says if a capacitor is put
from pin 1 to 8 it
bypasses the
1.35 kiloohm
resistor the gain will go up to 200 if a
resistor is placed in series with the
capacitor the gain can be set to any
value from 20 to 200 uh so basically
since they have a capacitor there it's
at maximum gain
so it's a big NADA on that we can't
change that we'll just leave it how it
is so it says that there's two inputs to
it and that if you bump the gain up you
really need to short one of the in an
unused input to ground or you'll get a
bunch of noise so that's why they've got
uh pin four shorted the ground so
they're going right by the data sheet on
this that's pretty cool
all right folks so I got in my
replacement speaker so the best I could
do was an 8 ohm 5 watt which if you
remember is exactly what I was saying I
would rather not get but it's going to
be okay we'll see what happens so uh
hopefully this will get us going so I'm
just going to swap the just the speaker
and see if that fixes our our issue
where we got nothing right and it should
cuz I'm testing it and I can't get any
kind of reading on it so uh let me break
out the soldering iron look there's one
right over
there let me get that sucker ready and
uh we'll swap this thing real quick okay
nice new one in there all right so I got
better
leads I got some fluke leads for my
Fluke meter I'm happy
now can't get it
nothing
right on this one now remember this is
in
circuit
well it's in circuit so I'm not getting
my 8 ohms because I'm
uh you know we're measuring with it
connect ected to the uh the little
amplifier
board okay so but we got a we got a
speaker apparently that's fine so uh
we're ready
[Music]
to I'm going to put the stuff back in
place and then turn it over and we're
just going to turn it on and see if we
can tell that the amplification is
working and then um I guess I'm ready to
put the platter back in
um and we'll go from there all right so
I cleaned up the old grease and I put
some of
our uh Super Lube synthetic grease on
there that we use on the pinball
machines all the
time and that ought to do it all right
we're plugged up everybody keep their
fingers
crossed all the way
down
33
maybe
45
sounds like I might be hitting something
in there maybe I got the cord in the
wrong spot or
something
so we are getting
[Music]
volume all right so now she's
working all right let me try to actually
uh play a record on it okay so if the
sound cuts off it's because YouTube
figured out what it
is what is what it is is
[Music]
[Applause]
[Music]
nephew I'm a love
machine ha
yeah
yeah okay so it's working here's what
I'm going to
do um just for Giggles we're going to
change out that one
cap that is supposed to be uh the one
that sets the
gain so they have a 2.2 in there and it
says on the data sheet that it's
supposed to be a 10 to put it at full
gain at 200 so I'm going to take that
2.2 out I'm going to put a 10 in and
just see if that makes it louder we
already went from a 16 ohm speaker to an
8 ohm speaker which I believe would make
it louder but I'm not positive um so I'm
going to change that 2.2 out and put a
10 in it and see if that gets it any
louder so there's our 2.
two and it is
between pins one and
eight all right so we put a 10
microfarad in there uh so I'm going to
put that in and then I'm going to
replace the other two one at a time just
to see if it improves the quality of the
sound any I doubt it but let's see if
that made it a lot louder or if it
there's no change at all
[Music]
[Laughter]
[Music]
N I don't think it changed it at all so
um they put the 2.2 in there they must
have had it match to the the cartridge
or something where they knew that's all
they needed instead of the 10 so putting
a 10 does not help at all okay so I'm
just going to uh we're going to replace
those other two caps one at a time just
to see if it improves quality at
all
iect the
[Music]
other okay so the first one is this 470
16 here which is basically a filter
capacitor the power Power is coming in
from a winding on the um
motor comes
over it's 12 volts or whatever we've
figured out it was um and then it runs
through runs through this diode so now
it's DC
baby and it's
pin uh six it looks like but you can see
that the trace also goes through and
connects to one side of the capacitor on
the other side is the ground so
um filter cap let me make sure that's
pin six yeah pin six so we'll swap that
and just see if it sounds any better I
doubt it all right filter cap
replaced we'll play a different part of
the song so hopefully it doesn't mute
[Music]
it h no difference at all
so the last one appears to be uh in line
to the to the
pickup I'm wrong it's in line to the
speaker h h a m
thing
220 micro farad
um
yeah okay so we'll swap
it
[Music]
okay so replacing that that last cap I
think did give us some more volume but
it's basically to the point that it's
distorted which might
be because the cartridge isn't that
great or it might be because that
speaker's cheap you know if you turn it
down a little bit it sounds pretty
decent but for what it is so I think
this one's fixed you can hear all of the
motor noise
though it's just loud you know this is
just a loud record player it would be
fine for a kid
so I guess that's how it was intended
anyway all right I'm goingon to glue
some of these things back down and then
put this one back together and we'll
call this one
done so in my opinion
recapping uh those three caps doesn't do
a freaking thing waste of time your best
bet is you might have a bad
speaker you might have a bad cartridge
if yours doesn't work right the Caps
that little soundboard is probably just
[Music]
[Music]
fine you better be
little yes she
never she come around knocking on your
like she did
my you down with big brown eyes anding
you up with
aack
yeah she never get
one everywhere she around knocking on
the door she did on
my you down
big building you up
[Music]
with
[Music]
very
cool all right so I think that one's
pretty
good so the other one
um we had the turn T the turntable's not
turning at the correct
speed probably going to be the grease on
it and uh it sounds kind of
crappy it is
loud but check this out this thing
sounds pretty good on certain
[Music]
records but I'll never let you break my
heart
again okay people so the problem with
this
one is the needle is all messed up I
want to show you something on the side
of it there see the FP for Fisher Price
on the side of it so these are special
needles that they had
made all right so basically the needles
broke
off
okay you're not going to believe what I
did I did it I said the heck with
it so I bought a New Old Stock
now it's a 911 D
ds77 so I believe that
means uh 911 is the part number
basically and the D is Diamond the S is
sapphire and then seven is
the size of the
tip and then the other seven is the size
of the other tip so it's
Diamond Sapphire 7 mil 7 mil I guess
it's
mil and I'm sure it says that on the
back probably as
well so this is the one that you
need now I
wish that it was
9.95 this record player I think I bought
it for five bucks this isn't the the one
that wouldn't make any sound I paid $10
for that one and we just fixed it with
the speaker so it's been a few days by
the way but uh I went ahead and ordered
this this freaking
thing
$32
shipped $32 for a
toy that I already paid $5 for oh Lord
boy it's a good thing that this is
fun if this wasn't fun I'd be crazy to
do that right but I kind of want to get
the thing
fixed you know I'm a
Salesman so somebody's going to come in
my shop and give me $50 for this thing
and I'll make 10
bucks I'm GNA get $50 out of this
toy right so the other one I got a
little more profit margin in so it'll
all work out but good Lord this is an
expensive hobby folks
$32 and I don't even know if it works
yet okay so just pushes in I've been
using these as like a pair of needlenose
pliers to very
carefully do like one of them to get it
in and
out so let me see if I can install it
all right so while I was at it I went
ahead and replaced the capacitors I
don't think it really does much but I
had them laying right here and I had the
thing open so why not preventative
maintenance uh it could be that the
thing's working fine now but after it
runs for a couple hours one of the Caps
starts
tripping uh so we got new caps in
it the motor I uh cleaned whenever you
remember I took the platter off I don't
know if I filmed that part I think I did
the other one but maybe not this one and
uh there's nothing else really to it you
know so let's see if she'll work with
the new needle in it I don't know if I
showed this earlier but this is what you
want people
metal PT and Phillips head
screws number six 5/8 of an inch long
which one's the original one huh you
can't tell because they're exact same
thing it's just one has a really weird
head on it the other one has a standard
Philips head on
it so you want the uh it you of course
you're supposed to have the plastic one
but these metal ones are so similar so
similar people number six 58 of an inch
long make all your problems go
[Music]
[Applause]
[Music]
[Applause]
[Music]
bye-bye all right folks so there you go
the end of that was probably all messed
up cuz YouTube probably doesn't want me
playing such a great song Oh heaven
forbid somebody find this song and go
buy a CD or something with it on it so
leave your comments below make sure to
give me a thumbs up for taking the
trouble to film it for you even though
YouTube wouldn't let you listen to it
and uh I'll see you on the next video
hey make sure to check out my brother's
Channel my brother Donnie the links down
below so we'll see you back here in a
couple days with another arcade game
Pinball or jukebox video hope you
enjoyed it I know I
did
[Applause]
oh it's a shame
