Taking Apart An Old G E Radio So I Can Attempt To Fix It Part One

Amateur Repair Time
257 followers
5 Video Views·Feb 15, 2025
We're trying to keep some of the vintage electronics out of the landfill. Many times when something stops working, it can be repaired if someone will simply take the time to attempt to repair it. This channel documents our amateur attempts at repairing vintage electronics we think are cool.
We don't typically restore anything, we're just trying to get them working again. We've found that most of this stuff was well built and with a little help will start doing what it was intended to do.
Radio Repair
Phonograph Repair
Clock Repair
Projector Repair
ladies and gentlemen this is Joe's
classic video games back with another
cool amateur repair Time video for you
this
evening so if you haven't been following
along I've been messing around with some
radios and some clocks and some record
players and uh I don't really know what
I'm doing that's why I call it amateur
repair time so when I work on pinball
machines arcade games jukeboxes I kind
of know what I'm doing and so we always
get all these comments where people um
think that you know I'm a genius or
something where I I just know so much
not
really I just uh have learned over the
years by working on things that I've
broken and then I kind of figure it out
as I go along right so these
radios I don't know what I'm doing I've
watched repair videos other people doing
them I have a basic very very basic
knowledge of
electronics and um of course I work on
arcade games jukeboxes and pinball
machines and are able to get them
going but I really like these old radios
so I'd like to learn how to do that so
on this
video as an amateur we're going to see
if we can fix this thing now I've got
all kinds of radios this is just a small
sample of the radios that I have I've
got them all over the place people look
I've got a bunch well I've got them
everywhere um and none of them work so
we got to get this one to work I did get
that record player to work if you saw
that video I got it to
go um so I can play
records uh but I don't have a working
radio so let's see if we can work on
this one now I own a bunch of
them so I'm going to do some videos
fixing them up if I see an old cool
radio I pick it up this particular one I
bought on eBay a while
back I try not to even go on eBay
because I'll always see something on
there that I want right so I just don't
go on there cuz I'll end up with a bunch
of them now if I start fixing a whole
bunch of these then I'll go in there and
buy some more but this is a general
electric I think it's supposed to say
[Music]
mapone musone I believe it was made by
GE yeah
look General
Electric
um cool little radio I think I paid
$27 for it or something like that
shipped but it doesn't work and the cord
has been cut off of it
right
so we're going to have
to we're going to have to uh take it
apart see what the chassis looks like
and then I'll see if I can
uh we'll work through it I've got a
bunch of capacitors and stuff I ought to
be able to do that right now what I
would like to do is get the
thing uh working before I do a cap kit
on it you might say well why would you
do
that because one of my favorite radio
repair guys is the mighty
Shango the mighty Shango has said that
several times the shanster says that you
know you should learn how to fix the
thing first and then do a cap kit on it
because if you just do a cap kit on it
you might introduce another problem into
it now I'm pretty good at cap kits on
monitors arcade monitors and stuff like
that and I can solder fairly decent I
have a good understanding of that um but
uh he's got a good point I would I would
prefer to test the things and figure out
what in the world's wrong with it before
I do a blanket cat kit I just I would
prefer to do that but I don't really
know what I'm doing right so I don't
know if that's going to be completely
possible but maybe we'll attempt it so
let me uh turn it around let's look in
the back of it and then we can uh we can
uh uh see what kind of shape this
sucker's in so the cord someone has
taped another cord on
there I've got some cords so I'll put a
new one on
it the grommets cracked but it ain't
that
bad oh and by the way I'm not the type
I'm trying to make it look brand new or
anything I just want it to play I guess
this is the antenna bar I've never
really had one that had an antenna
bar feels kind of loose in there I don't
know
folks okay so let me take these off and
we can uh look in a little
further all
right let's see here now I'm you're
going to have to accept my apology
here you're not going to believe
this the only quarter inch I can find
close at hand is from Tina I have a
americanmade radio a Japanese made
tripod
stand
a
americanmade tripod mount for my phone
and a Chinese quarter inch
but that's okay I'll throw it away soon
and get me a nice good
one I probably have one here somewhere I
just didn't want to you know spend too
much time looking for
it into the Vault we
go into the Vault we go let's see what
we have
here oh yeah boy that's that's gnarly
there look at that oh hell yeah that's
how it's supposed to be be for
sure what in the world are they doing to
me
what were they
thinking good God it says it didn't they
said it didn't work yeah no
wonder come on
people come on
now come on now people that's not how
it's supposed to be
does um
H I mean all of these I've seen and
again I don't know what I'm doing but
all these I've seen disconnect I don't
know what's going on here we're going to
have to get some
schematics like why have we got this
right this looks like it should go to
something
let me look inside of it yeah there's an
antenna that runs all the way
down something wrong somewhere but we'll
figure it out it'll all be gravy baby
okay so uh that's that oh look at the
little good
god what the you see this
right what what are they
doing what have they done to us okay uh
and it's these cans that I have heard
everybody say that these are the ones
that get the silver
Micah
garia that's right folks my channel is
going to be a little different
um okay
well why in the world would you need to
disconnect the speaker to get the
freaking
chassis out that doesn't make any
sense this also doesn't
unplug oh yeah it
does okay we have partially disassembled
it we're getting somewhere now
folks it's all been taped together come
on now now that's not how you're
supposed to do it come on
now don't do that people not even
once okay um before I get any further
I'm going to go print out the schematics
the it may show me on the schematics
what's supposed to unplug and all of
that right let's see before I get that I
want to show you what I'm talking about
on the tripod so I've got this old
Japanese tripod here that I bought at a
thrift store for $3 right and look at
this cool little Mount
here so this screws on just a standard
tripod
mount and it has these little arms that
are adjustable so I'm just filming this
on my
iPhone um it has these little arms that
are
adjustable right so me being the type of
person that I am I looked around for
this so it comes with these two
little
Allen wrenches but here's what's so cool
about it it's made in the United States
it's actually made here in South
Carolina it's called the PED 5H iPhone
tripod mount now these people have not
paid me for this they don't know me from
Adam there's your instructions you can
scan that if you want if you're Hightech
I'm not the name of the company is
thought out.
biz
okay so they make stands for things you
know the best high quality made in the
USA so that's why I bought it because I
I I thought
hey I I don't want to get so I went on
eBay and they had these little things
like this that you mount your iPhone on
to do just this every freaking one of
them was from China now I thought it
would be a shame to work on these
beautiful old American
radios with a freaking tripod mount from
China I don't want to do it now the
phone's from China but I can't help
that so this is the company it's a very
nice uh design I haven't had any
problems with it I've only used it a
little bit but uh and I'll tell you
after I bought it they emailed
me personally like one of the owners or
something emailed me and said hey just
checking in to see if you had any issues
with your tripod mount I wanted to see
what you thought about
it so they seem like a really cool
company and it's like I said it's South
Carolina it's probably I don't
know how they're manufacturing is it
just 3D printed or something kind of
looks like it might
be but it's nice
quality and it's doing uh exactly what I
needed to do so maybe check them out why
don't
you thought out. is now it was little
more expensive than the Chinese one but
it wasn't
crazy so yeah let me get the
schematics so after looking at it closer
that it actually does have removable
leads on it on the
speaker so that's all good that's how
it's supposed to be so looking at the
schematic here I I discovered
something okay so there is the speaker
and you can see that it shows that it
disconnects which makes sense remember
remember I told you I don't know what
I'm
doing and then over here is the antenna
I
suppose and it doesn't show that it's
disconnectable so I would assume it's
soldered
in but then I started thinking about
it I took that off I'm not really
supposed to take that off like it stays
on the chassis that's why it's a little
smaller so I can slide the whole thing
out come come on people you should have
told Why didn't you tell me that you sat
right there and watched me take the
thing off when it did I didn't need to
take why would you
do so I got to turn it up we got to take
the the screws out of the bottom I
think that's more like it there we go
look this one has a
washer the two on the back have a washer
somebody remember
that there will be a quiz
later
I'm going guess these are not the
original
screws trying to hold it so I
don't crash it into the
speaker I see an extra piece of plastic
Bake Light
whatever
it's all good
people all right
um we got to be careful we have to be
very careful I don't want to break
it
okay oh
no what the
world we have something inside of it
oh it's a candy wrapper oh there's the
piece of the bake light look I can glue
up
that I thought it was like some kind of
Christmas
paper let's see how old that
is
I'm checking it out here says
Sams
Cola what in the
world Sam's Cola but it looks like it's
like a candy wrapper okay well we got
the chassis
out
well I see something I like and I see
something I don't like first it's never
been touched so I like that so it's not
super hacked or
anything
but the
sockets well I don't
know
you
know there's crap all over this too it
feels like somebody sprayed WD40 in it
or something but the sockets I've never
seen that type before but then again I
haven't seen that many of them I guess
it's all right so you've got the there's
like a PCB and the wires connect to
these instead of directly to
the I don't know this look kind of like
a cheap socket to me
but
but pretty cool nobody's messed with it
so I think I'm going to get rid of the
across the line cap first just in case
it tries to blow up on
me and we'll go from there so let's look
at the schematics shall
we shall we so it's
a
g475 we've got these from
radiomuseum.org of
course so here is our AC coming in one
line straight to
ground and one line over here the switch
is also on the ground
but I think they did that on most of
these because they wanted to keep noise
out of the volume
control right so that's kind of a thing
normally you would want the switch on
the on whatever is not going to be the
neutral you know we're going to put a
different plug on it which will be
polarized so
it'll only plug in one way not
necessarily because I'm super concerned
about that I know a lot of people are
I'm not all that squeamish about it but
because uh I bought new plugs and that's
what they are they're polarized uh so
we'll wire that upright so we'll run the
neutral to ground but the switch is on
the neutral so but that means that the
chassis um is going to have the hot
doesn't get Switched Off
basically not the end of the world
though because it only runs to there
okay so
um one side connects straight to chassis
ground well they're calling it B minus
and uh the other side has a capacitor
running between
it and ground so that cap there is right
across the two ac lines
basically so if that thing
shorts it's going to be
explosive people think that like if that
shorts it'll kill you and all that it's
not that you've already got power on the
chassis you know it's it's if that thing
shorts you're shorten your two wires
together on the AC it could burn your
house down if it doesn't trip the
breaker it'll at least burn this radio
up and whatever it's sitting on like
this my beautiful desk
here and uh the only reason they really
put that in I believe is because it gets
rid of some interference so if you cut
that out it'll still work but it'll have
interference we'll put a new one in but
if we're going to try to test
it uh without replacing all the caps
first we need to get rid of that one for
show okay and so I guess that runs over
here to this
35
W4 which is going to be your rectifier
tube so that's going to turn the AC into
DC um and it's a string set of course
so AC is going into pin four and then
out pin three
and then in the pin four and out pin
three of all the other
ones and
um 35
volts 85
volts 97
volts 109 volts 121 volts would do
it okay so that makes
sense uh so the only thing on this side
of
it is the light
bulb and that cap that's across both so
then it goes through the rectifier well
all of the the string of tubes I guess
then it goes through the rectifier and
on it
goes so we've got a 100 microfarad
capacitor
there so it's 125 volt and then it runs
through a resistor I wonder if that
drops it down you would think it
would I think this is just a pretty
standard oh
look
look it's a coul how
fancy I think maybe all right so uh yeah
we got to get rid of a bunch of these
wax caps
eventually but it'd be fun to try to
Power It Up with the original ones in
it maybe I'll test them to see if any of
them are shorted and then we'll try to
fire it up I've got a variac over there
if I could get some kind of way to test
the um
amperage we could try it I ain't scared
I ain't afraid
people all right so we need to find our
across the filter cap or across the line
line cap so the line comes in
here and one side is connected to
there it looks like that cap is
connected to
there and then the other side of the
line connects over to the
switch oh yeah that's the ground Port
okay yep so that's the ground so this is
our hot here well I'm calling it hot you
get what I'm
saying uh so that's that and then this
is the wire running over to the light
bulb so it must be that cap let's see
what that says that cap
is O It's
grimy we're grimy
people
by the way I'm just taking it slow folks
this is fun to
me if you uh oh
look it's already exploded on
us
047 630 volt DC I believe that is the
one it appears that way that must be C11
so we're just going to get rid of that
sucker that' be first I forgot to
mention to you there was a case on the
bottom of
it what's 500
volt so it's exactly what the schematic
said and that is
a I don't know who made
that all of this stuff is sticky icky
icky like greasy see all the
residue man they might have put WD40 in
this
sucker I think this is my couplet
here I'm going to call it a coul people
because it's
fancy so that's the beginning of your
integrad
circuits which is just uh it looks like
two capacitors I don't even know why
they would do that but they put two
capacitors in the little
thing just to be
fancy all right so we got rid of that
one okay I'm going to check the other
ones that I can get to and just see if
any of them are like already
shorted okay folks so again I don't know
what I'm doing so I've been going over
the schematics for about 30 minutes just
trying to identify
you know all of the
parts
the um
tuning
condenser this coil
here just trying to figure out the
layout so I can learn a little bit and I
using a multimeter now this isn't the
best way to do this but basically I'm
just trying to see if any of the Caps
are just completely shorted so I checked
the two electrolytic caps they're not
shorted yet I checked these all these
paper wax ones none of them are dead
shorts there was one over here that I
thought
was so I cut it out and it wasn't
shorted basically it has something to do
with
um the volume control but this
this it's just a strange setup I've
never seen anything like this switch I
guess makes sense cuz it's
old so there is
a onoff switch on the volume control
which is this
actually pretty cool and it works I
checked and You' got continuity when
it's when it's open and it's no
continuity when it's in and then it
turns so apparently that is a
volume but this one look at this you're
going to love
this I mean I'm sure if you're if you
know about this stuff you probably seen
this 100 times but there is a switch in
the middle of this one so you turn it
and then there's a
switch and you turn it the rest of the
way so if it's this way it's for the
record
player and then if it's this way it's
for
the um the radio so I don't know very
strange and this is the tuning one my
string
is pretty screwed up so that is this
one I believe no that's the wrong one
that is this one this is what they call
the volume control so this onoff switch
on volume control it's not on the volume
control it's not on that one it's on
this one well this to me is represented
as like an onoff switch like a slider
but it's not it's a turning one that's
the volume
now and so you have these you have these
lines coming off of it white green and
yellow and they run up to this little
board that has that had three capacitors
on it I cut one of them off I'll put a
new one on it um and by the way I'm
going to replace all these caps I just
I'm going to try to fire the thing up
with the old caps just to see if it uh
what it does and uh
my my whole plan is I'm just trying to
learn you know what I mean so I'm trying
to get it to work with the old crap if
you just put new caps in
it you're not going to learn anything
about caps
right that's how I see it so I want to
see how it sounds with the old crappy
caps in it or if it'll do even do
anything or if something starts smoking
or if it burns up the the the output
tube or something I you know some TR
trying to learn
here so uh if you follow this it does
match the
schematics but that's a
rotary pot it just seems weird to me so
one of the wires appears to be grounded
well B minus not ground going to B
minus uh another one goes through that's
the cap that I cut
out so it it tested like 15 ohms in C
but out of circuit it's not shorted and
the the circuit still tests 15 ohms so
it has something to do with this
potentiometer here so I don't know so
I'm going to put a new one back in and
then uh we're about ready to
carefully fire it up and see if it does
anything now the
antenna I don't completely understand
either this
end nothing's connected to it but it
doesn't look like anything ever was
connected to it
so I don't know what the deal is with
that that may just be they've got the
wire wrapped around it and that's just
where it was
soldered and you're not supposed to put
a wire there I don't know again people
we're learning okay now this
end that that seems to have went
there and if I look on the schematics
that seems correct as
well
okay and you've
got this which is connecting to the
chassis I think somewhere you've got
this little bad boy down here I don't
know what the hell that
is no I'm wrong it's not connected to
the chassis it's
connected yeah okay so this is
connecting to
the tuning cap there or that's what I'm
calling
it and
then a wire comes off of it this this is
actually a blue wire a wire comes off of
it and goes to one of the pins on this
tube so that is this so that blue wire
is coming off there this is where it's
hitting
the one tuning cap I guess and then
running to the tube so that's one of the
wires and then one of the other
wires is this other blue one and if it
were to attach
there to the frame of
this
right that tuning
cap is actually isolated from the the
chassis it looks like it's just sitting
on the chassis but it's not there's see
how it's not touching
it so that's this
connection um it's hitting this side of
both of those and then it's coming
down and then uh You' got it going here
and blah blah blah so that blue wire is
like basically that connect connection
there and then the other parts of the
tuning
cap or whatever it's called are these
two wires these two white wires
here and they are
running through the
board to
this coil I'm calling it and this coil
I'm calling it but uh I'm sure those
have better names like oscillators or
inductors or
something we'll figure it out people
um so that's what you've got going on
there if I don't break the thing messing
with
it
uh yeah so I think I've got it kind of
I'm getting it a little bit in my head
so my whole point
is this wire appears to go there now
this
wire is the wire that's hanging out the
backat so I think that's just kind of
like
supposed to be for an external antenna
or something that's my
guess there may have been a wire over
here that was for the same thing I don't
know
but yeah so I need to solder that back
on uh I need to replace that cap I cut
out I don't have a safety cap for the
across the line cap so I'm just going to
wait on it for a while but I know
they'll work without that it'll just
have some feedback in it some hum or
something so um we can try to fire it up
without that and of course I'll have to
hook the speaker back
up but
um yeah with the speaker mounted in the
cabinet they made that where it's kind
of hard
to work on the thing if it's turned
on but whatever we've probably got that
mic crap in the Caps I mean in the in
the Transformers there oh
look at it I can see them look they're
in there you see it oh
boy all right let me pop a new cap in
there and fix that antenna wire cap
installed that little board came out and
has these little Wells basically
that fill up with
solder easy
peasy all right I'm wrong about the
antenna I
think so just to see if the antenna had
was connected I checked continuity
between here and here because that one
still hooked up and it was a dead short
and then if you look really
close the the wire that is running to
now notice that all this has been messed
with too
right either I did it in my sleep or
whoever had this before
me knew even less about it than I
do so one side of this is connected to
this tuning condenser right and it's
this green wire
here okay so the green
wire see how this is all
spin messed with the green
[Music]
wire right
[Music]
there
it is actually attached to the
leg of
the antenna right but it's not attached
to the wire of the antenna the wire of
the
antenna is actually that it's hard to
see it yeah there it is that's the
actual antenna this is just the Brack
CET like the
actual tube
okay and so this wire that's sticking
out if you
look it runs all the way down to the
other
end wonder if it will let me
Zoom NOP we're not going to be able to
get past
that
see it wrapped around the top down there
I know it's not focused
but
so this
wire is actually connected to that
end
so I think this is one end of the
antenna
and this is the other end of the
antenna okay so then there's another
wire
here which is this red one that they
have going down to the
chassis it's hooked to a green
wire
which is connected to this metal
piece on the back so that is connected
to the
chassis which kind of makes sense so I
think they've been screwing around with
all of this and have it all messed
up so the way I could
tell so if I check
between this
wire and that
wire which
is the the antenna mount it's a dead
short but I think
it's I think it's because it's it's the
wrong one so I'm going to check between
this wire which I believe goes to there
and this wire and see if that's a
short well I don't know folks they both
test as a short so I just went ahead and
put the green one which looked like it
at one point had been there I I
think there's probably no way the front
end's going to work on this thing
because that I think we've got antenna
problem so I'll probably have to
eventually just take that whole thing
off and take it apart and figure it out
but uh I think I'm about ready to try to
plug it in so I'm going to test the cord
and see if there's a short on it the old
cord
and then I'm going to plug it into that
varc over there and just turn it up a
little bit I I I'm I'm going I need to
rig up a thing where I can check the
amps while I do that just to see if
anything shorts or whatever but um we'll
just do the oldfashioned smoke
test with the
variac all right this thing doesn't have
a Transformer so well I mean it does the
output Transformer but uh it doesn't
have it's not a Transformer radio I'm
not too concerned about burning stuff up
if we burn up tubes I might know where
there's a whole bunch
more right so I'm not too worried about
it all right folks this might be
explosive so we're plugged up so I've
got a very act plugged
in we're on zero volts right now so
we're going to set it up to like
40 for now
right
I think that's phono to the
left
and radio to the
right I have no clue of where we've got
anything going because the light bulb
doesn't even work we may not even have
power okay so I'm going to turn it up a
little
more
nothing I've got a little issue where
the okay so we're we've at least got
amplification sounds like crap
but oh yeah the light is barely
working yep there's no front end at all
so I don't have the antenna right at
least
and my since my line has broke doesn't
turn that
great all right so we're
at 90 I'm going to go ahead and turn it
up to
110
I'd saying off tone so I guess that's
just a tone
control so that that may be the volume
there and it's just
very there's hardly any adjust to it it
just maybe how it
is yep we've got serious antenna
problems people all
right so I think what I need to do is
find some pictures of someone else's
online and see how they hooked up their
antenna and then uh I want to go through
it if I can get it to do anything I mean
we still might have you know bad tubes
bad
resistors all kinds of stuff but if I
can get it to do uh to tune in anything
I'd like to do that before I replace the
Caps CU I'm trying to see I want to
learn what each cap does you know like
so you replace this one and it makes
this better you replace this one it
makes this better not because there's
going to be a time when I only replace a
couple caps but because I'd like to uh
uh just learn how the different sections
are working I've read about it a lot and
I've watched other people's videos and
stuff so I know a little bit about it
but uh you know you learn more by
breaking stuff than you do by uh reading
stuff in my opinion that's how I learn
at least so I think we'll stop it there
I at least uh turned her on I'll bet it
did that though before uh before
I um I mean I didn't fix anything
obviously I bet if I would have plugged
it in from the beginning would have done
the same thing um
but I'm working through it folks I'm
trying to learn a little bit so hey we
got the light bulb com on so I won't
upload this
video until I get this thing working so
if you're seeing this video it's because
I've already fixed it and so the next
video you see will be the rest of this
now how could I possibly know that ahead
of time it's because I'll just sit here
and keep the video and never upload it
unless I fix the thing so if I uploaded
it you can bet I must have fixed it or I
wouldn't upload the video not that I
don't want people to see me not fixing
something but um because I I like
whenever the videos have a good
resolution right and this one doesn't
cuz I didn't fix it or anything yet but
it takes a little while and I'm learning
so leave your comments down below let me
know what you think especially about the
antenna I don't think I got that right
at all I got to go learn about how those
bar antennas work so leave your comments
below and let me know what you think
make sure to check out uh my brother
Donnie my brother has his own channel
here on YouTube he doesn't work on
arcade games pinball machines jukeboxes
or old radios or the record players but
he um he works on old buildings and old
vehicles and things like that he has a
farm and I'm over there with him on
those videos a lot of the time so I'll
see you over there but I'll see you back
here in a day or two with a uh arcade or
pinball machine video see you then
