Trying To Repair A Cheap Timex Wristwatch !

Amateur Repair Time
257 followers
1.1K Video Views·Feb 16, 2025
We're trying to keep some of the vintage electronics out of the landfill. Many times when something stops working, it can be repaired if someone will simply take the time to attempt to repair it. This channel documents our amateur attempts at repairing vintage electronics we think are cool.
We don't typically restore anything, we're just trying to get them working again. We've found that most of this stuff was well built and with a little help will start doing what it was intended to do.
Radio Repair
Phonograph Repair
Clock Repair
Projector Repair
Ladies and gentlemen, welcome back to Amateur Repair Time. I'm going to do a video today
where we play with some Timex watches, so stay tuned. When I was a kid, my dad used to buy watches
all the time. I remember he used to go to the flea market all the time, and we lived in California
when I was really little, six or seven years old, and he used to have a guy come over to the house
and the guy would bring a briefcase or like a sample case or whatever that the salesman's case
would bring it over to the house, and it'd be full of old watches. This would have been in
the early 80s. He would sit down at the kitchen table, and my dad would sit there,
and he'd let me sit there if I didn't talk. I'd sit there, and I'd just watch,
and the guy would say, I got this Bulova here I picked up the other day. I can take $20 for that,
and my dad would look at it. Okay, that's pretty neat, and they would go through like 100 watches,
right? My dad would pick a bunch of them up, and then he would buy them from that guy,
and then he'd take them to the flea market and resell most of them, or he might keep one,
and he would wear one for a while, and then he'd sell it and everything. When I was a kid,
I was always around watches, and I didn't really know the difference of them. I just thought the
names were cool, so there was Bulovas, and Caravels, and Timex, and Seiko, and Citizen,
and Ingersoll, and Elgin, and it just goes on, and on, and on, right? I just thought,
wow, that's cool. I thought they looked neat, and I thought it was just cool how they were old,
and they still worked, so I've always liked watches, and I've gotten into clocks a little
bit too. Well, like I said, I basically spent most of the time I was growing up going to the
flea market with my dad and selling watches and things. Whenever I was about, let me think what
age I would have been. I was probably 10 or 11. My dad bought me this watch. I think he got it
for me for Christmas. It might have been my birthday, but it's just a really cheap Timex.
Oh, look, the back's missing the little plug thing. I'll have to get one of those. I got a
bunch of parts. This has been in a drawer for, I haven't even touched this in probably 30 years,
but this was my old Timex that he bought me, either for Christmas or my birthday,
and it's just a little cheap watch. This would have been probably 87, 88, something that he
bought it. Now, they have the date on them sometimes, but I don't see it on this one.
Sometimes down at the bottom, they have the date listed. He got me this watch, and I thought it
was so cool. I used to wear it all over the place. I just thought it was neat that it was a company
that had been around a long time, because I knew that all those old watches, some of them were
Timex, and so I thought, wow, that's so cool. As a kid, I just thought that was the coolest thing.
I've looked into the Timex watch company a while back, just trying to figure out what the deal was
with them, and if they were still around. It appears that they're still around.
They started out as the Waterbury Clock Company. There were all these great,
if you've watched my channel, you've seen me mess around with some of these clocks,
trying to repair them. There's all these great American clock companies that made watches
started, I mean clocks starting in 1850, 1860, around that time. One of them was Waterbury,
and they used to brag, or not brag, but they used to advertise, and I guess they bragged,
that they made this clock, and it was $6 in 1865. This is a Waterbury clock here.
I've been working on it. I don't have it. I've got the hands off of it and stuff right now,
but this is the original case, and the original movement, everything. If you haven't seen those
videos here on my channel, where I've been kind of tinkering with them, again, it's amateur repair
times. I don't really know what I'm doing, but they're fun to mess with. It just blows my mind
that something is 160 years old, and it still runs, or it can be easily repaired. I just think
that's incredible. So, that's how they started out. So, they were about $6. So, I looked up
to see what that is in today's money. So, if in 1865, this thing cost $6, what do you think that
would mean it would cost today? It's about 115 bucks. I thought it would be higher than that,
but it's not. It's about 115 bucks. So, I thought, well, why is it? You'd think that
inflation would have carried it farther than that.
Apparently, there was a period of deflation, where prices went down several times in the 1800s,
and then also in the early 1900s, and then, of course, you had the Great Depression,
and blah, blah, blah. So, all that to say, $6 in 1865 was the same as $6 at about 1945,
which is, it's hard to even wrap your mind around, but in the United States, of course,
but that's just incredible. So, if this was sold for $6 in 1865, they could sell the same thing
for $6 in, it's not quite that apples to apples, but because you got the price of the materials
and stuff. But basically, something that cost $6 in 1865 would be $6 in 1943 or something like
that is when it finally caught back up, and it actually dropped down to at 1.6,
something that cost $6, the price would have been more like $3.
So, anyway, all that to say, this thing, imagine if you could buy this today for 115 bucks. People
would buy the hell out of these. So, you can imagine how they must have sold back in the day.
So, it's the great Waterbury Clock Company. But whenever all of that went on with the
depression and losing everything, they went out of business. So, I don't know if they were sold
or if they, maybe they didn't go out of business, maybe they just filed bankruptcy and restructured,
whatever. But what came out of the Waterbury Clock Company was the Ingersoll Watch Company.
So, I was looking around in my father's stash of watches. He's passed away many years ago,
but we've still got all of his watches and things that he collected. And I found this. So,
this is one I just found really easily. He probably had a bunch more. He literally left
us with hundreds of watches. This is an Ingersoll men's wristwatch. So, the Ingersoll
Watch Company is what the Waterbury Clock Company became. That's a good look at it.
Well, I got to try to fix this. This is cool. I don't know if I'd wear it though. It's kind of
weird band on it. I don't know if that's really my style. But a watch like this,
that case, I don't know if it's got silver in it or what. If it's got silver in it,
maybe it changes the story. But if that's not a silver, if there's no valuable metal in this case,
that watch working is probably only worth $30 or $40. They're just not super valuable.
At least that's my understanding of it. Back in the 90s, whenever we were going to the flea market
and he was selling watches at the flea market, he would sell something like that for maybe $30
or $40. So, I don't think it works. We might have to try to fix it. Okay. So, it was Ingersoll for
a while. And then at some point it turned into Timex, which we've all heard of. So, by 87 or
whatever, this was a Timex. And apparently they made just tons of different versions of Timexes.
Watch collectors apparently hate Timex because of the way they cheapened out whenever they made
their movements. But my dad always liked them. And he would talk about how it was just an ordinary
guy's watch. Take a lick and keep on ticking was their phrase. And it worked pretty good.
So, they were cheap watches. They were never expensive. I don't know if the Ingersolls were
considered expensive, but looking at it, it's real ornate. That's probably from the 30s or the 40s,
I would guess. But I would imagine it looks pretty plain to me other than the way the bands made.
This is certainly plain. He probably paid $10 for that or maybe $15. I'm wearing one
that I have fixed up just by cleaning it. And it's a Timex Electric. And you can tell
down on the bottom, it will give you the date of it. Usually I can't read it.
78 or 79, something like that. This is an electric one. So, it's a quartz movement,
but they had a quartz movement with a mechanical aspect to it. It took a big old battery and just
kind of an interesting thing. They must have sold a ton of these. I see them all over the place. I
picked this one up at the flea market for like five bucks. Okay, so I thought I'd show you some
more. You got this one. This is a Timex Quartz, which is just your regular battery watch. I mean,
it's basically the same thing, but instead of saying electric, it says quartz. Probably the
same movement. I thought I had a battery in it. Maybe it's not making good contact. Let's see if
we shake it a little bit. Will she get going again? It moved, but it don't want to cooperate.
So, that one's got some problems. I was looking through my stash to try to find this one,
and I've got four or five watches that were mine. So, I picked this one up at some point.
I must have bought this at Walmart or something back in the day. This is a Timex Indiglo,
maybe from the 90s. I would guess, but I don't know for sure. So, the Indiglo ones, I think,
had a button you could press and make the dial glow or something, right? So, that's one that I
must have used to wear back when I was in college or something. And then we've got this one. This
is a really cool looking, maybe like 80s model with an interesting way they've done the date.
It's a cool watch with a cool band on it. And then this one. This is like a digital.
You may remember seeing things like this in the 80s or the early 90s.
Very cool. So, I thought what we might do... I've got one I want to work on,
but I thought what we might do is go to the store. You can go with me. You go with me. We'll go to
the store and see if we can find a Timex like this, if they still sell them at the store. Now,
when I was a kid, the store you would go to would be Kmart, but there's only like six Kmarts left
in the whole country and I don't live near one. And we could go to Walmart, but Walmart is like
a hellhole. Walmart is like, it's like you're going into behind the enemy lines and you're in
a war zone. The Walmart's around here at least. And I'm not like stuck up or anything. I'm wearing
a Timex. I'm not uppity, right? I just, I try to stay out of Walmart if I can help it. I haven't
been in a while. The one down the road somebody got shot at and everything. I mean, it's crazy.
All right, folks. So I've made it here to Target. Now, I came to Target instead of Walmart
because just my thinking, I think the watches at Walmart would probably be just the cheapest
ones possible to get. And I think they would have less, they would have less concern about
any of them even trying to be stylish or cool, right? Now, Target has always kind of held
themselves as like the next step up from Walmart. In my mind, the way I see it, Target is kind of
what Kmart used to be. You might think Walmart is what Kmart used to be. Walmart is its whole,
its own thing, right? I think Target is kind of like our modern day Kmart. That's just how my
mind thinks that you may think differently. So today I am wearing, kind of bright out. I can't
This is a 1980 Timex Automatic. This thing isn't really worth any money.
I'm not really that interested in things that are expensive. And this one's a little worn and stuff.
But it's a 1980 Automatic Timex. I haven't serviced it at all. The thing runs perfect.
Self-winding. Great little watch. It's probably worth 30 bucks, maybe 40 bucks, maybe. I think
bought it for five dollars or something at the flea market or somewhere, whatever. So I'm going
to look up and see how much that thing costs new. I know it's from 1980. It actually has a little
number at the bottom that tells you that the date. It's a 1980 model. It probably would have been sold.
I don't know that. I think Kmart might have had it, you know, because Timex, all of those were
low-end watches, even the automatics. But the automatic would probably be one of their most
high-end models that Timex would make, although they didn't make anything that was high-end.
So if I was guessing, that would have been a 20 or 30 dollar watch in 1980. I may be way off,
but it's an, it's an automatic. So it's a little more complex, but I think 30 bucks would have
bought you that watch. So we're going to go and target and see if they have anything even
comparable at $30 in 1980 would probably be what a hundred dollars now, $80. So we're going to go
in here and see if they've even got an $80 watch. You've got the problem where in 2025, nobody needs
a watch. It's all, you know, your phone has a watch, you know, so you don't really need a watch,
but they are kind of coming back. People think they're cool. A lot of people wear Fitbits and
Apple watches and stuff like that. So maybe, maybe they've got some in here. What do I expect to see
in here? A bunch of cheap watches that are between 10 and $20 that I don't think there'll
be anything that's a wind up movement. I don't even know if they even make those anymore that
for sale in the United States. I think everything will be battery operated. I think most of them
will be between 10, be between 10 and $20 made out of plastic and just junk. And then I think
they'll probably have some that are real blinged out and look like they've got big fake diamonds
and crap like that in them. And there are gold and silver and crap, and those might be 30 or 40.
And I don't even expect them to have anything over about 40 bucks.
So that's, that's what I'm thinking is going to happen. So we'll go in here and see how far off
reality I am. So nothing analog or anything. These are all, you know, much more complex than
just a simple watch. All right. I think part of the problem is they don't really have a jewelry
department in Target. So they've got just one little area with a little bit of stuff, but it's
all kind of cheaper stuff. They don't even have, there's nowhere that they would have a watch.
So I think we have to, we might have to do the unthinkable and actually go to Walmart. I know
they at least have a jewelry counter, which is more like how Kmart used to be. So we'll,
we'll go into the hell that is Walmart and see if they've got any.
Okay. We've made it to Walmart. I feel like I'm in a snuff film or something.
This ain't even, this, this is like a dangerous part of town.
Anyway, let's go in here and see what kind of watches they got in Walmart.
So when I was a kid, I remember coming into the jewelry department
at Walmart with my mom and it's still here. It's kind of in the same spot too.
So they have an entire rack of watches. I'm surprised. Look, there's even some in the case.
So let's see what they got. Huh? Yeah, this is kind of what I expected. Armatron digital.
That's cool. Skechers. My problem is everything's going to be in the wrong spot. So it's going to
be hard to tell what the price is on anything. It looks like the Skechers digital ones are $23.
Um, little battery operated Skechers with a decent little band, a little cheap watch, but you know,
that's kind of what I figured I would find. Like I said, it's kind of hard to tell what's what.
Looks like the Skechers ones all say $23. Yeah, so that one might still be in the original spot.
23 bucks for a little cheap Chinese watch, but that's cool. Yeah, I was hoping that they'd
still have something like that available. Watches. Damn, they sell a bunch of them.
I'm kind of surprised. This is more than I thought they would have.
So some of them are $10. As cheap as $10. It's a George watch, which I think that's Walmart's brand,
right? Look, it's vegan leather. We used to call that pleather, but I can't hate them for trying.
Well, that's pretty cool. 11 bucks for just a little cheap TikTok watch. Nothing wrong with
that. So here's the little cheap watch with a metal band. It's got the long life battery.
So I guess the question is, the old school Timex ones that you used to be able to buy that were
the cheap battery Timexes, were they better than these cheap battery George watches?
Probably, because $10 back then would be more like $25 or $30 now.
So is there anything here that I might want to get? I don't like the ones that are real
shiny. I don't see anything that I would want to add to my collection.
I wonder if they've got any that are like a step up. These are a little more dressy.
They're all made by George. I mean, you know, you can say what you want, but that's not a bad watch
for 11 bucks. I mean, yeah, it's a little cheap piece of crap watch to just throw away when it's
over. But I mean, it looks good. Okay. Day and date feature. I bet they're all in the wrong spot,
though. They even read strip, easy read dial. These all say fossil, but they're all George.
So I think they're all just in the wrong spot.
Hey, I'd like to find the Roku TV set up.
Roku set up? I'm not sure, but I don't work here or anything.
Have you been back in electronics? Yeah, I just got back.
Oh, okay. Yeah. And I don't know about them, man. Sorry.
Doing good, man. How are you doing? I'm good. Okay. That's interesting.
Got the fake tachometer bezel like so many I did.
Okay. These are all called Time and True. Same thing, just cheap little watches, but you know,
that's a really good looking watch for 10 bucks. I mean, what do you want for 10 bucks?
Yeah, I'm kind of shocked that they have this many. I did not think they would have this many,
but I guess they still make tons of them. I wonder if there was a time when they were about all gone
and then they started bringing them back because people kind of got into it again.
That's a cool looking watch. It looks like a lot of them are kind of like a vintage style.
So that's all of those really cheap ones. They also have a bunch of kids ones that are like
eight bucks. Just little digital watches. The pricing, to me, seems just fine.
Little Minecraft calculator watch, $8. I mean, yeah, they're all cheap. You just throw them away,
but $8, I mean, that's fair for a little kids watch. All right. So it looks like they've got
a bunch actually in the counter over here. So let's see. Look, they've got bands even.
I haven't been in this area of Walmart in years. I'll be damned. I'm seeing some other ones.
So Casio, $20 and $30 Casios. Oh, there we go. $34 Armatron. Stainless steel Day-Date,
genuine leather strap, limited lifetime warranty. Cool little Casio. Wow. 50 bucks.
Timex Expedition. That's pretty, that's up there. Okay. These Casios are $31.
Little battery watches. There's a Timex in the back. They had a lot of different types.
There's a $43 Timex. $50 for the Timex Expeditions.
I assume those are all quartz. Yeah, there's one that's running.
That's an Indiglo as well. Probably 40, 50 bucks. Interesting. Okay. So over here,
they have this case. It spins around and it looks like it's got some more expensive ones in it.
So you've got like some Timex little digital ones. $50 for a digital watch. $50. That's
pretty wild. So these still have the takes a licking and keeps on ticking branding,
but they've got a whole ton of them that are kind of like women's watches,
$50 a piece for most of them. And they're all quartz.
Are these punk ass kids walking around in here and just trying to get,
start a international event. That's probably the nicest one I've seen. 50 bucks.
If they have a wind up, I might get one if it's, that seems kind of neat. Real vintage looking.
I mean, I wasn't kidding about Walmart being a hell hole. It really is. Casio Armatron.
Here's the big old, you know, Rolex knockoff Armatron.
All right. So the best ones I can find are these Casio's actually. They're just quartz
ones, but they look nice. And you know, Casio is cool. $36, $31. And then there's some decent
ones over here too. $36. That's a nice looking little watch. $47. $31.
All right. So let's get out of here before I have to kill somebody. Looks like I missed
out on the Elgin's. They don't have any of them out. Maybe they take them down at night
so I can see one down there, but they're all a little more expensive. So probably a little nicer.
All right, folks. So I've been going on eBay for a while now and buying all these little
cheap watches. And I've been getting, picking some up at the flea market and stuff. And it's
just stuff like this. You know, it really doesn't have much value. You can buy something like this
at the flea market usually for sure. $3. And I bought a whole lot of them on eBay.
And a bunch of them are like Timex's, but it's stuff like this that really has hardly any value
at all. That's like a 20 year old Timex that nobody would even really want, you know.
And then some of the Indiglo stuff like this. Is that an Indiglo? That's not even an Indiglo.
That's a fake Indiglo. And so I've just been picking them up whenever they're cheap.
So even on eBay, you can buy these for $2 or $3 if you buy a lot of them, right?
And I've been working through them a little bit and I've got some pocket watches. And again,
I only get the ones that are cheapos because I'm trying to learn how to work on them.
There's some stuff mixed in with them that I kind of like, like
this Helbros. I want to work on it. That's kind of cool, but you know, it's not going to be worth
a bunch. And so I can't find, I couldn't find anything at the store that I really wanted.
So I came home and I had bought a watch in this lot on eBay that had been wet.
So this is the case and that's the face. Okay. So let me show you a picture of it on eBay.
So you can see what it looked like when I bought it. Okay. So I bought this lot of watches. Now
you just saw them sitting on my desk for 30 bucks for all of these, right? Now,
a bunch of them really aren't that great, but I kind of like the older ones, you know, and
like, I like this one and this one, and I thought this one was kind of cool.
So anyway, I just wanted some stuff to mess with, right? So this is that watch. It's a Timex
self-winding. So when I got it, you see how filthy it is, that's rust. So it had been
submerged or something and it looked like for quite a while. So that's what it looked like
when we started. All right. So I've taken the thing apart. We'll talk about that here in a
So this is like an Elgin pocket watch. I know the light's too bright, but you have to deal with it.
This is an Elgin pocket watch. I don't know what year this would be from, but this is how watches
traditionally are kind of made. They have big gears and they have these bridges. So like this
is the balance here and you've got this bridge that holds it in place. So then there's a bridge
up here and then there's a bridge here. And if you look, I don't know how good it's going to let
me do this, but there are jewels where the gears meet the bridge. I don't know if that's a jewel.
I think it is. So anyway, that's an Elgin pocket watch. So here is an Elgin watch. I just happen
to have a bunch of Elgins. A lot of these were my dad's he had laying around. So here is an Elgin
watch and let's see if I can find something to point with. Like a little screwdriver I think.
Screwdriver. So this is an Elgin watch. It's just like the pocket watch, but smaller.
So that is a jewel and that is a jewel and it says right here 17 jewels. So there are little
jewels and they put those where the pivots are because they don't wear. I wonder if this balance
will even move. Yeah, so maybe. So these are just old junk movements that are laying around.
So this is how a pocket watch, a regular watch usually is. So again, this is the balance and
then this is the bridge that's holding them in. So you can take just this off and take these gears
out. Right. And then you can see, you've got a couple of big gears here with screws in them
that you can take out. And then you've got more screws here to take this bridge off.
So the thing can be serviced traditionally like most pocket watches could. You got to remember
these things are only like, I don't know, the pocket watch was invented maybe 150 years ago,
something like that. Before that everything was a clock, you know. So the genius of these is that
this balance wheel, you can turn the thing upside down and it'll still run. You don't have to have a
pendulum. So these have been sitting around a long time. I don't think any of this stuff works.
This is another Elgin. So you can see this is the balance and then this is a bridge and then this is
a bridge. You've got a couple of gears on here you can take off and that's just how the things are
made. Right. So they're a little tiny. You can see how small it is compared to my hand. You know,
you know the size that a watch is. Here's another one. So this is one of the really
older ones that was a different size. I mean a different shape and it's also an Elgin but it was
made the same way really. Like here's a balance and then here's a bridge and you got a couple
screws on it. I mean a couple gears on it for the winding. What do they call that? The something
works. And then this bridge up here has, you see the three jewels. Now this one total is a 21 jewel
movement. So this is another jewel. And so they use that for all the pivots because they don't
wear. Right. And so this bridge can be removed. So if this thing had a problem and someone who
knew what they were doing, not me, I'm an amateur. I don't know what I'm doing. They could disassemble
this thing by taking this bridge apart and then looking at the gears here and just figuring out
what the deal is. Right. So that's typically how people fix watches. So then along comes Timex.
Now collectors kind of hate Timex because they're made cheap. Right. So here's a Timex,
one of those ones I just bought in that lot. So look at the difference. First of all there's no
jewels. Or actually is that one? Maybe this one's got one. I don't know. Is that a jewel? I don't
think so. So there's no jewels. The movement just has one big plate and all of the gears and things
stick through the plate. And you have to put this, if you took this apart, you have to put the whole
thing back together and you've got like one, two, three, four, five, six, seven, maybe different
things you have to line up to put the plate back together if you were to try to reassemble it.
Whereas on the Elgin, which is basically a higher quality watch, you have three. You got three
things that you have to line up to put this plate back on. And it's not really that complicated.
It's pretty easy to do that. Right. Once you're, you know, a watch repair person.
But how do you line up all this? Okay. And since they don't have jewels, they're cheaper to make,
but they can wear. So like you've got metal, these are just metal holes that a metal pin goes in,
which is kind of like how a lot of the old clocks were made, if you think about it.
Well, that one that we got that was all rusty, that's the dial. I haven't done anything with it.
I started thinking, you know, since it, I took it apart and it was like this, but had a little
bit of rust on it. I started thinking, you know, since, this one's in much better shape.
Since we, since it's all metal, I think I'm just going to put it in the ultrasonic cleaner. So I
have a, I have an ultrasonic cleaner that I bought that is used to clean, you know, I've been using
it to clean clock parts. Right. So I took the case and I put it in the ultrasonic cleaner,
just like this. And it's in really clean shape now. It cleaned it right up. So I took it out
of the ultrasonic cleaner and I rinsed it off with water and I dried it off with a paper towel
and it really cleaned it up compared to how it was. Right. So I'm happy with that.
And so then I started thinking, well, the movement, it's all rusty. It's all metal.
Why not just throw it in the ultrasonic cleaner? So I threw it in the ultrasonic cleaner for 10
minutes. Now on one like this, you wouldn't necessarily want to do that because it might
dislodge the jewels or, uh, you know, you got a couple of things you need to worry about. One is
the balance wheel, like the, the hairspring on this balance wheel is just so tiny and fragile,
but this thing was all rusted up. So I thought, well, the hell with it. I mean,
what's it going to do? Just break it. I mean, I've got other ones and I just replace it if I
have to. Let's see if I can, if you can see the hairspring on this thing, on this Elgin.
Yeah. I don't know if you can see it, but there is a spring wrapped around the middle of that.
Um, so you gotta worry about, well, I guess you can see it on this one. So you gotta worry about,
are you going to break the spring, that little tiny spring down in there?
See it? If that spring touches itself, basically it's not going to work.
So are you going to, are you going to break that spring or are you going to break the pallet fork?
So there is a little thing in there that moves back and forth. As the balance wheel turns,
it hits, it knocks it back and forth. And that's what actually makes the gears move in the clock
that makes the, in the watch that makes the dial spin or the hand spin. Right. Um, and on,
on the traditional watches like these, those sometimes have jewels as well. So like on the end
of the, of the fork, the part that hits the next year or the, the hits the balance wheel is a jewel
and it goes back and forth like this. Tick, tick, tick, tick, tick, tick. Right. Well,
those jewels are glued in place. So if you put it in an ultrasonic cleaner, the risk that you run
is as it, the ultrasonic cleaner vibrates the water, right? Which is how it works. It basically
creates little mini explosions in the water of bubbles, you know, that clean every little
crevice of everything. Anything water can get into, it'll, it'll clean it or whatever your
chemical is that you have in it. So you don't really want to put a nice movement in it because
it might vibrate those damn jewels out of the, the, um, the, um, pallet forks. And you can see
just how tiny those must be there. It's down inside that just a little tiny things, right?
Um, compared to the size of a watch, but a Timex is so cheap. It doesn't have that. I don't even
know that it's got it. Like it says zero jewels. So I don't think there's any jewels on the pallet
fork. So I was like, well, I'm just going to throw it in there. And so I threw it in the
ultrasonic cleaner for 10 minutes. I've heated it up to like a hundred degrees Fahrenheit. So I
threw it in there for 10 minutes and that thing, it was this filthy, right? And that thing, you
could see dirt bubbling up out of that thing. I didn't film it cause I thought that it, you know,
I didn't know that we were going to do this, but that thing was just cooking.
Whoo, it was cooking. And so it's getting all the dirt out and everything, right? So
I'll leave it in there for 10 minutes. I don't want to leave it any longer than that. Cause
there's little tiny gears and stuff, you know, and I took the face off of course. So the face
on these has little, it doesn't have the feet that the face usually has. It has little
just metal prongs that bend around the plate to hold it in place, right? So I took that off.
I took the hands off and, um, got down to just the movement. So I threw it in there for 10 minutes,
took it out. It had, I use Zepp to clean it, which is just like a degreaser basically that
you can buy at Home Depot. That's what I put in my ultrasonic. It's not even that clean. I've been
cleaning clock parts with it. Um, took it out of there. It was dripping with that crap off of it.
So I just rinsed it off. I rinsed it off in the sink, right? So that got rid of all the Zepp,
but now it's got water all over it. So you can take alcohol and pour on it and alcohol makes
evaporates water. Basically it absorbs water and then alcohol evaporates. Um,
but I've used alcohol on some of my pinball boards that I work on and it kind of stains the board.
So I didn't really want to do that. So I was thinking, Hmm, this thing's wet. It was dripping
wet and I was like, why can't I just put it in the oven? So I heated the oven up to 400 degrees.
Now I'm not saying you should do this again. This is amateur repair time. I'm just saying what I
did. I heated the oven up to 400 degrees and put it on a baking pan and I let it stay in the oven
for 10 minutes. It's okay. When I pulled it out of the oven, the damn thing's running. So this Timex
took a licking and kept on ticking.
So I've got about half of mine to just put that ugly face back on it. Right. And then just wear
it like that with all of that dirt and everything on it. And it'll still be running. Right. But I
don't, all that dirt's going to get on the movement. So I don't, you know, I don't know
that I want to do that. So I think what I'm going to try, because this face, I've got a whole bunch
of these Timexes and they're all the same size and they all have that same movement in it.
So worst case, I can just pull a face off of another one. Right. But I think what I'll do
is I'll try putting the face in the ultrasonic cleaner just to see if that works too. Right.
So this is what we're starting with. Now on these Timexes, a little trick is, I don't know how many
other ones work like this, but see how there's a hand left. You don't actually have to pull the
power hand off because it's attached to a gear on the other side of the face. You don't,
if you pull that off, all it's going to do is make it where the gear comes off. Right. Or you can
just leave it on and then it's one less thing that you have to put back on whenever you finish it.
So this thing is filthy. I think what I'll do is just try a Q-tip and some rubbing alcohol or some
isopropyl alcohol and just see if any of this will clean up by hand. I'm not going to go crazy on it.
If it won't, I'm just going to drop it in the ultrasonic and if it screws it all up,
oh well, it screws it all up. But I would like it to clean up most of this, but maybe leave
a little bit of wear just so that you can tell that the thing was in really bad shape before
we started. And we don't know for sure that that's keeping good time or not. I think it is.
It kind of looks like it's moving the way it should. And the reason that it's running is
because the thing was fully wound. It just wouldn't turn. So I've been researching this
a little bit and it appears that Timex used to tell repair guys back in the day to do that,
to just dump the thing in naphtha, which is lighter fluid. My dad used to try that. He
would put lighter fluid on movements and then he'd complain. This is his desk actually. He'd
complain that the thing was running too fast. He said every time he put lighter fluid on it,
it'd make it just run like a rabbit. That one's not running too fast. If anything,
it's going to be running too slow, but I think it may just be doing what it's supposed to do.
Okay. So I'm going to try a little rubbing alcohol or a little alcohol on it. And then
if that doesn't work, we'll throw it in the ultrasonic. Well, it's actually cleaning it
up pretty good. I cleaned that just real rough and real quick. I wanted to have a little bit
of it left just so that I can brag about how the thing was dropped in water and it's still running,
right? So I wanted to have a little wear left. So I'm going to clean off as much of it as I can,
but I don't think I could even possibly clean it all off. But if it leaves this staining around the
marks for the hours, that would be great actually. I'd kind of like it to be like that.
So I'm going to keep at it. All right. So that's how it ended up. It cleaned up pretty good.
Some of the self-winding wore off. Even the Timex is a little faded now.
Okay. But we want to see if we can read this number at the bottom.
Interesting. Okay. So 4047 and then 3167. From what I understand, that's 67 is the year
and then the 31 is the movement. Usually there's five numbers there.
See if I can find another one here that's got it on it. So I don't know. That may not hold up
whenever there's only four numbers, but that clear as day says 67. Let's see on our other one
that we were messing with here. Where did it go? Well, hell, I'm wearing one. Let's look on this
one on my arm, shall we? See under England there, it says if I can stop shaking. It says it's all
so tiny. That's one of the problems with working on these. It says 79, but it's, is that five
digits? Yeah, there's five digits there. 26279. Yeah. So the last two digits are supposed to be
the year, but I don't know about way back in the 60s. What do you think? 1967? All right. I'm going
to do a little research just to make sure. It looks pretty good when you're not like super up
close on it, but it's still, it's got its wear that I was, that I was looking for. All right.
It took a little while, but I got it back in there. I put oil on all the pivots on both sides
before I put the, uh, the face back on. I've got the crown back in and the little retaining ring
that goes in there. Got the hands back on. That's a pain getting the hands where they don't hit each
other. Um, I've got the stem back in where it sets it and we'll wind it, but this is actually a
self-winding. It's an automatic. It's like I had cleaned this as well in the ultrasonic cleaner.
So I'm gonna put just a little bit of oil on it and then bolt it back where it goes under there.
Um, screw it back. You rotate it until you line up with the two screws. I'll show you, but
um, got to put the weight back in it so it can wind itself and then we're about done with it.
Oh, I got to put a band on. All right, so I was able to actually get the weight back on there
and it spins around freely and if you listen closely, I don't know if you can hear it,
it is winding it. It's at least making a clicking noise. Um, so we got to put the back back on.
Kind of hard to tell if it's running right. I guess I'll set the time and then I'll watch it
for a little while and see if it seems like it's keeping good time. Now it looks real bad up close,
or if you look at it without a light on it. I don't know if I can turn the light off or not,
but um, if you look at it from a distance, it just looks like an old worn watch. Very cool.
That's how it looks without a without a light on it. Much more presentable. All right folks,
so I found an old vintage band to put on it. A little worn, just like the watch.
That's a cool watch now. What did we decide, 1967? Pretty cool. So I guess these Timex movements
are kind of, watch on one hand, these Timex movements are kind of, um,
repairable even though they're junk. You know, they're, I don't want to say they're junk,
but they're, even though they're, they're very simply made. So I like it. So I'll wear it to
work tomorrow and see if it takes good, if it keeps good time. And, uh, I'll put it in one of
my videos. I've been putting my watches in some of my videos. I don't have any watches that are
expensive. I don't want them. I just like the ones like this that were like a working man's watch,
you know, that somebody bought and they probably really appreciated it and, uh, kept it for a
while. And it might've ended up in an estate sale or something, uh, after they passed away,
or maybe they upgraded, maybe they got the nice new one. Did you know, um, I've looked up since
I went to the store and filmed that footage, I looked up and you can get, uh, Timex's at like
JCPenney's too. And, um, I don't know where else, but, um, they make new ones that are kind of more
high end that are automatics like this. And, um, most of them are under the name, uh, Timex Marlin.
Um, some of them are the Timex Waterberry after the clock. That's pretty cool. And, uh, the,
the newest ones now have Japanese movements in them. So they've got nice automatic Japanese
movements in them. That's pretty cool for a, what used to be a low end watch. Now there are a couple
of hundred bucks for those, but, um, I think it came out pretty good. All right. So leave your
comments below and I will see you on the next one. So I'll have to, maybe that, I like that one.
Maybe that one next.
