Rebuilding a 140 Year Old Seth Thomas #89 Clock Movement - This Thing Is ROUGH

Amateur Repair Time
257 followers
1.1K Video Views·Jan 27, 2025
We're trying to keep some of the vintage electronics out of the landfill. Many times when something stops working, it can be repaired if someone will simply take the time to attempt to repair it. This channel documents our amateur attempts at repairing vintage electronics we think are cool.
We don't typically restore anything, we're just trying to get them working again. We've found that most of this stuff was well built and with a little help will start doing what it was intended to do.
Radio Repair
Phonograph Repair
Clock Repair
Projector Repair
ladies and gentlemen welcome back to
amateur repair
time I have been doing a bunch of clock
repairs lately because I've got an
ultrasonic cleaner which has really
stepped my game up on clock repair
because a lot of it is just cleaning the
the
movements um so I have tons of these old
gingerbread clocks um kitchen
clocks antique 120 year old clocks that
I have picked up from different places I
love these things and so I've been
slowly going through fixing them up
cleaning them up one by one so I've been
filming little videos of them and people
have been loving them so I figured I
would work on this one tonight this is
an old Seth Thomas Clock I don't know um
amateur repair time but um I know a
little bit about it I don't know a ton
about him but Seth Thomas was kind of
the biggest name in americanmade
clocks um they made a bunch of them
this particular one the the rooster top
or the headdress of it is pretty messed
up it's all chipped so I thought we
might be able to rub a little um stain
on it to cover up some of those areas
where the plywood is chipped away make
it look a little better and of course
we'll clean the movement and get it
going um like we've done on the others
this one's a little different than the
others though because it's a Seth Thomas
Seth Thomas um out of the inexpensive
ones was one of the more high-end ones
if that makes any sense so it wasn't
like the nicest clock you could buy for
but for an American clock that was even
close to Affordable it was kind of the
highend um so it just had a little bit
more going on than some of the other
ones I assume that this pendulum is
original but you can see it's pretty
nice it looks like it's got like a
almost like a copper finish on it um
this one has the um not only the strike
but also has the alarm on it if you
don't know about that
basically this little wheel here you set
it for a certain hour and then whenever
it gets to that hour it just releases
that thing which just bangs the hell out
of this this Bell as much as it can
until you wake up um but then at the
same time the movement had a strike
feature which would uh gong the
hours wow that sounds horrible
holy crap it must be rubbing on
something easily one of the worst charms
I've ever heard I think it maybe
adjusted a little too close like it's
touching it right
now I hate to do this one we haven't
even looked at it but if you were to
bend that out so that it's not quite
touching
it oh my my hand touched
it much
better all right so this this has been
amateur repair time uh we got that
one all right so uh this is the shape
that it's in now there is a label down
here I don't know that we can read
it it looks pretty there's a key in it
too that's always cool when there's a
key in it it may be the original one or
maybe
not Seth Thomas Clock
Company Thomason Connecticut is that
what it says
USA we may be able to clean it but I
know a secret since I've been messing
around with it there is a label on the
back I don't even know where I got this
clock I bought a whole bunch of them uh
from a gentleman's family that passed
away but I don't think this was one of
them I don't know where I got this one
maybe I just got at the flea market or
something but um I looked through the
pictures of all the ones that I bought
from that gentleman's estate and this
was not in those pictures so but let's
look at the back there is a big label on
the back so this one was obviously built
on
Friday let's see what it
says I'm trying to decide if I should
turn the camera sideways for
you I believe I will so if you're dizzy
look away for a
second all right you can look back now
it might make it easier for you to read
I'm not going to turn the clock upside
down myself though I'll just try to read
it sideways this it says
highgrade 21 juwel
adjusted made for railroad service
that's hard for me to
believe oh this is an advertisement
movement number
260 what are they just advertising
different things they have that's a
that's a pocket
watch all right so this says 8 day half
hour strike
and here's a picture of a pocket
watch with of course the Seth Thomas
name tag on
it but it says number
298a 8
day half hour strike and let's see what
it says if I can read it sideways
directions for setting the
clock
running gear maybe keeping it in order
unhook and remove the
packing wire holding the
pendulum and hang the ball on the
rod the beat should be equal and
regular and will be so if the clock is
set in level
position to get
to set the
clock always use the minute
hand which can be turned in either
direction without injury the way they
did that was they on the J hook
they made it kind of slanted so that it
will slide past the thing on the minute
hand I believe on the minute on the
center wheel I
believe um
never turn the hour
hand the clock is
regulated by means of a
screw at the bottom of the
pendulum if the clock should go
too
fast lower the ball if too slow raise it
I'm I'm reading this sideways by the way
directions for
setting
alarm
alarms and alarm
clocks turn the alarm dial over to the
right till the desired hour as indicated
on the dial
lies directly
beneath the hour
hand then wind the
alarm
directions
for striking
clock to get the correct
strike turn minute
hand to
12 and then back back to figure
n continue doing so until the proper
hour is struck now here's the hard one
all this red
stuff I might be able to read it if I
don't read through the
camera good Lord I'm going to win an
Academy Award for this
video reliable
[Music]
watches only are marked Seth
Thomas Made in I can't make it out folks
you get the point right so we don't know
the name of this model but it may be on
that sticker that's on the
inside okay so let me
uh you're still
sideways so here's the back it's been
split a little bit
bit up here and there's a nail through
it there so this thing has seen better
days right you can see that this the
paneling has kind of separated the
ply um but there's a lot of meat left on
the
bone okay so um I'm going to take the uh
hands off first we're going to get down
to the movement clean it reassemble
everything put it back together work on
the cabinet a little bit and then get
the thing to run so I removed the paper
dial it does say Seth Thomas on it it
might be original um it's a little loose
we'll try cleaning that up a little bit
I'm not trying to make them look brand
new if I was I wouldn't be starting with
this one I kind of like saving the muts
if you know what I mean so we'll make it
look as good as we can but I'm not it's
not going to look brand new or anything
when we're done
um beautiful pendulum you saw all the
time so here is the
movement so it is a Seth Thomas movement
it's stamped says Made in US
America and
um it has
this
pendulum that hooks up here and goes
around
the this just kind of
interesting and I would guess this isn't
their real early movements cuz it has
the nuts on the post the early ones
usually had little pins in it so I don't
know when they stopped that but I would
guess this one's maybe 1900
1905 something like that it would
probably be hard to figure it out um by
looking at the model unless you had a
name or something and it just says it
doesn't say a name that I can see I'll
carefully try to clean that and get a
little bit of that dust off and then
maybe we can read but maybe not or it
may have something stamped on the back
of it or something all right so I'm
going to carefully remove the um
movement from the case and then we'll
get a better look at it all right so I'm
taking the movement out but uh
unfortunately the
strike
uh spring has sprung so I can't tighten
that
up it's broken in half
so the problem is if we try to pry this
up out of the cabinet that's going
to so I'm going to have to secure that
somehow and be very careful whenever I
remove it from the case and that also by
the way is the side of the cabinet
that's broke so it could have pushed on
that so hard whenever it broke that it
actually broke the wood all right I was
able to safely get it out
um it uh it looks like actually the
spring has not broken it must have just
came loose of the Arbor on the in the
middle
so whenever you're turning it you're not
actually connected to the spring but
we'll figure all that out
um there is a date there it looks
like no that's the
drop 8 and A4 has something to do with
the pendulum length like
the there's a bunch of different
measurements I can't ever figure it
out um
St for Seth
Thomas Made in US
America look how damaged the plates
are so that's a
little like how did they do that it
almost looks like it's been dipped in
acid or
something I don't know what that
is it's not dir dirty though like none
of that will come off so it'll be
interesting to see if any of that comes
off in the uh Ultrasonic Cleaner I would
guess no but doesn't really matter I'm
not doing it to make them all bright and
shiny I'm just trying to get them where
they're clean and well working okay so
let me turn it over so here's the back
um it almost looks like there's a
plating or something off of it I don't I
don't get
that like what is that
maybe they use some kind of pretty harsh
chemical to clean it or something at
some
point I don't see
any pivots that are just obviously
destroyed okay so I'm going to put a zip
tie around
this to hold
it um I don't have the ability I've got
these clamps but you can't get them in
there and then get them back out
whenever you reassemble it so I just put
a zip tie around it works really good
this one I can't do that so I'm just
going to be very careful when we take it
apart it's already got all of the sprung
unsprung so it should be all right um if
not you'll never see this
video okay so let me turn it back over
and take the nuts off of it put the zip
tie on it and get ready to disassemble
it all right so I was able to get it out
just fine it is broken near the near the
center see the brake
there so we'll need a
new we'll need a new um main spring I've
probably got
one um I got this one tied up so
basically you twist it up make it
small um tie it off take your click
spring loose and then carefully unwind
it so that the the zip tie is holding it
it makes it where you can move it around
and take it out uh I took a couple out
already so I could get the plate
off that
was spring tied to
it our clock over there's about to gong
that what you just heard a little I
think they call that
warning this little one of these is in
warning so it's basically this thing is
about to take loose on the one that you
in the background so whenever the minute
hand gets around and hits this one
little lever wherever it is I guess
maybe I already pulled it
out hits that lever the J
hook it lets this sucker fly and it
goes so you're about to hear that in
about a
minute I'm looking to see if anything
looks damaged and all looks pretty good
it's really not that
dirty this one has the escapement and
The Verge inside the
plates it just struck our half hour
this is another one with a spring on
it here is our escapement
wheel so on these you want to look and
see if the tips of any of the teeth
are broken bent anything like that this
looks like they're an excellent
shape to my untrained amateur eye
but you see like see the the tip of the
pinion there how it has all that grease
and dirt on it that's fine whenever it's
just been oiled and it's clean but
that's not clean oil that's probably
greasy
nasty going to mesh you up oil you need
new oil
the other one is in the other room is
responding I'm getting overloaded with
clocks can you have too many clocks I
don't know that you
can you know you could try to keep all
your clocks set at the same time but
then they trip all over each
other might as well have
them slightly off sitting here all
yeah there's like it's like varnish or
something on it I don't
know
whatever all right so I got to take
those Springs loose and this will just
pop up it's already
loose um and that'll get us down to the
plate okay so I got it all apart I
really do think that's some kind of
cleaning gone
arai I got the
the
um um main spring off there's the arbor
it's not
damaged and I'll get a good clean out of
this now with no main spring on
it so I
have one two 3
4
five 6 7
8 9 10
11
12 13 I already counted that 14
15 16 17 18 19 20 21 22
pieces all right so I'm going to put
those in the ultrasonic cleaner and see
how well they clean it up I'm going to
guess that these actually don't get much
cleaner cuz I think some of that's
plating and I think the plating is gone
so I don't know that it'll clean up much
but we'll see we'll see what it does my
weak uh point is cleaning I'm not that
good at it but the Ultrasonic Cleaner
really helps me get it as clean as I can
get it but to be honest this one's not
really dirty I've seen them much worse
this thing probably would have ran if I
just um set the time and let it run well
we had the broken main spring so we
basically had to take it apart but um
other than
that um I think everything looks in
pretty good shape I guess we didn't look
to see
pivots we'll look at that after we clean
them see if it needs any pivots
bushings all right I got everything out
of the Ultrasonic Cleaner it cleaned it
up but it didn't make it look brand new
or
anything it looks just marginally better
than it did like I said it was it was
already in pretty decent shape um and I
put a little bit
of restore a finish
Walnut on the top part of that clock the
part inside by the way was already like
that
um it didn't take that very well so I
tried a little bit of Walnut stain on
the lighter parts and it I mean it it's
darker now but it you know obviously you
can still see it pretty good so I'm
going to keep working that and just
putting another coat another coat and
another coat and see if I can get it to
suck up any of that stain to get it
darker um I could put I'm using Walnut I
could use
something darker than that to try to get
it to stain it um like mahogany or I
think I've got something called
provintial but it's it's a different
type of wood so it just doesn't get as
dark it's the it's not the
um I don't know if that's Pine or what
but it's not the it's basically plywood
and the outside ply is oak or whatever
that is and it so it takes stained
pretty good but the inside ply which is
what's
exposed because the outside ply is
chipped off just doesn't take uh stain
as
well um
so let's see if these
pivots these
bushings uh need any work you may be
able to hear way off in the background
the
um uh electrostatic what is it called
Ultrasonic
Cleaner cleaning up the pendulum
Bob all right so we're just looking to
see if
anything's all wallowed out
that one actually kind of looks like it
is but that nothing goes there that's
not a that's not a
pivot so what is that a bushing that
someone has
added I believe it is
no it's
not or is it is something there has it
been added looks like something's been
added doesn't look like any bushing I've
seen
but it's like they have a
um maybe that's just the way it's cut
you can see that that is wallowed out a
little
bit so someone who
was a uh expert would probably put a
bushing in some of those
see that one's a little elongated see it
at about the 5:00
position so when you have everything
mounted in
these you know the spring is providing
tension so let's say the Spring's going
this this way it's making tension that
way on you know maybe the center Wheels
mounted here so it will
wear that side of the pivot and then the
center wheel maybe it's hooked to the
the I not the center wheel the first
wheel maybe it's hooked to the second
wheel and
um it's caught between here and here so
it's got tension pushing that way and
maybe this one has tension pushing that
way so they all wear in a predictable
pattern
that's going to be similar among like
movements so we'll quickly look at the
back of course there's none really down
low
I mean ultimately I guess it depends on
how the the pinions fit in there
but none of them look crazy to
me all right so let's look at the front
plate
someone was saying that these are
probably not Replacements that they are
from the factory they put some
in I don't know if that's true or not
but I need to get a champ for a bit
because you can
cut that nice little oil uh seal or
whatever you want to call it in there
you know what I mean you'll have that
nice little ring around the
bushing I don't see anything crazy that
obviously needs
work yeah see I don't think those are
bushings because from the
back they don't go all the way
through so like if you look at that
that's just cut into the brass it's just
a circle in the
brass well if you flip it over on the
front it looks like a bushing but really
all it is is just a they have an oil
well cut into the brass so that's all
original so it doesn't have any bushings
yet I guess we'll see whenever we start
putting them back together if any of
them appear to need it all right so I'm
going to start popping the stuff back in
where it goes all right folks I've been
messing with it I think I've got it um I
was able to put a new main spring on I
actually have
some main springs for wall clocks for 8
days so a 30-day one you know would be
have more
coils um and then the
measurement on this one is 3/4
time8 time 96 in so the 96 inches I
guess would basically give you the eight
days uh the 3/4 matches that
exactly and
the18 seemed to be the same but I didn't
caliper it or anything I looked at a
couple other ones I have I have some
others that are 3/4 and 96 in but the
0.18 slightly different I think it was
16 or something like that so
um I guess if you knew exactly what it
was or if you if you um um calipered it
you could get it
perfect uh so I put that in and that's
how that goes it comes with that wire on
it we'll cut that off here shortly I
wound it up and the arbor went right on
the little slot in the middle of it it's
hard to see but there is
a you see if you look right down there
in the middle there was a cut in it so
as you turn the arbor there's a little
piece on the arbor that gets stuck in
that little hole and that's how you wind
it so we got that on there put
everything back together and then I had
a weird problem where it was chiming or
the the strike it seemed all this would
start uh whenever you were like 10
minutes
early so the way you adjust
that is this little J hook here so there
is a hook that comes
down it's shaped like a
j and when the
center Arbor there turns around the
center wheel it will push that
up and so it's going to push it up a
little
bit when that bar comes around it's just
dropped it it's going to push it up a
little bit and as it pushes it
up it's going to set what they call
warning it's basically going to release
this up here where it starts and then it
stops it it holds it in place with the
count lever suspended up in the air and
then whenever it gets to the point
where that hook drops off it goes bang
back
down it's going to make this
little lever
here release that top
wheel which is going to start going
around and it'll make the whole thing
count with the count
wheel
um so uh by bending that J and doing it
over and over and over again eventually
I was able to get it set up I think it's
good now so I'm going to go ahead and
mount it back in the cabinet and then
we'll uh we'll try it without the face
on just to make sure everything's cool
and if it is we'll go ahead and put the
face on it now I
also um of course cleaned everything
I've got the
um The Verge back in on the Escape wheel
it looks like everything's
cool I think we're
good all right so I'm going to mount it
back in the cabinet and we'll see what
it looks like okay so I've got it
mounted back in I started the pendulum
but there's a noise check this
out the noise is coming from right there
it's not in beat or anything but if you
look there is a
pin that goes through the pendulum
there and it's rattling around so
checked online and they're saying that
that slot
there needs to be closed up a little bit
so that that doesn't move around in
there as much it just kind of moves and
also you can put some oil on it to Cal
it down so let me adjust that a little
bit and see if we can get that to stop
uh being extremely annoying
all right so I put a little bit of
grease on
it Super Lube I put this stuff on
everything um that's what I use on pinb
machines all the time and it seems to
have quieted it
down so I think we're good okay um so I
want to show you how the alarm works
the
alarm is this little thing here and you
put it on there and it has all these
little numbers on
it and if you
look right there there is this steep
little drop
off
right and it's at the
12 right
there lines up with the 12
so let me make sure I've got this
right uh yeah well I wonder how you set
it
different oh that's right it's going to
spin around on the hour hand okay so
you've got the hour hand on there
wherever right and this thing
I guess it goes on first actually all
right so it goes on first you've got the
hour handle there wherever and this
thing as it spins around whenever it
gets to the correct
hour this little piece
here that rides on that little wheel is
going to fall off that cliff and go down
like it is right now but normally
it's
up right now there's this little wire
that connects down to here so if we put
this
on we got to do it just right so that
the thing is on top of
[Music]
it it's hard doing this crap with one
hand all right
so I have turned it and it has lifted
that lever now if we go ahead and wind
this
basically it's like you're winding up in
a
a a bomb or something and there is a
little crutch on it as well and if you
look the tooth is caught in the tooth of
the gear the pallet is caught in the
tooth of the gear
and on the back of that
Verge is a
hammer that's aimed right at this
Bell so it's like you're setting a bomb
okay so the hour hand is going to ride
on this thing it's going to spin around
it's going to spin around and whenever
it gets to
12 this lever is going to fall off that
Cliff which is going to drop that wire
which is going to drop that crutch down
right
so prepare your
ears all right so we're coming up on the
12 I don't know if I have the wire
adjusted right but I believe I
do well I believed
wrong oh it's probably because I got it
[Music]
[Music]
all right I think I've got it adjusted
just right so it's going to fall off
that Cliff whenever it gets to the
12 you
know which is going to allow the wire to
drop that and by the way this is loud
folks get ready for it to be loud
and then it just runs until it runs out
of
[Laughter]
steam that's how they did it a 100 years
ago folks you would know that if you
watched like uh Bugs Bunny cartoons
okay so um I'm going to put the hands on
it and watch it for a little bit and see
if it
um see if it keeps good time but let's F
I guess first let's see if it's going to
chime or strike I
mean
um there was a little
left so when I get up to about here it's
going to go into warning it's going to
set the the governor and all that and
get it ready it's going to lift this up
but it's going to be held and placed by
that pin on the
back all right so it's in
warning now when I get up to hopefully
close to dead
up it will release
it see where it does it
[Applause]
maybe a little bit
after Okay so we're not adjusted to
where it will hit it I've got the thing
bent so we need
to and that's going to be just because
uh I've been I've had it out screwing
around with it so we want it to be close
to it but maybe not not quite touching
it
okay so that should work all right so
let's try it again
so when it gets down to maybe 20 after
20 something after it will go into it
will go into
warning that's warning
that's not quite right it didn't stop at
the at the Deep um
indention it did that time but before it
didn't so it's not quite right we've got
to get this and that bar just behind
it adjusted a little bit better the
angle between this one and that one but
pretty good um let's try it again
so this is I've got the handle on upside
down this is basically the 30 minute
strike it should just go down into that
next one and
stop yeah see how it kept going it
should have it should have dropped that
bar in the back's not quite right
it's not getting it every time so I got
to do little micro adjustment all right
I think I got
it so I made my little
adjustment and what I'm doing is I'm
using the hand to turn this hand Arbor
or the hand the center
wheel so that's warning
[Music]
perfect we're pretty close to
perfect and looks like it's going to do
it just a little bit Past Dead up so all
right so um I'm going to put the hands
on it and watch it for a little while to
see if it seems to be keeping decent
time and if it is I'll put the face on
it and we'll check it out all right
folks so I think that's how we're going
to leave
it it cleaned up pretty good I'm going
to get some darker stain to try to get
that stained better but it's the inside
ply of plywood so it just doesn't stain
as well the outside was probably oak or
something um we'll see if this thing's
going the chime I mean strike I don't
have it I don't think I've got on the
right hour but we'll see I can adjust
that
later uh but I think it's very
presentable now and it seems to be
keeping pretty good time so I'm going to
adjust the pendulum up and down to
uh get it as accurate as possible but
it's about ready to go back on the Shelf
with this other one over here that's
going pretty loud for me so let's see
how far off the hour hand is for the
strike I kind of like the worn paper
dial I think it looks pretty good
actually it matches
the worn cabinet what do they call that
the the Japanese word for
it my buddy Paul was mentioning that the
other day I can't there's a Japanese
term for just leaving
even yes I got the strike off I got it
on 1:00 instead of 2:00 or that's on the
half hour but we'll uh we'll keep our
eye on it I think on this one you can
turn the hand
back to step it up let's see if that'll
work I think you can go back and then
forward
so now it's on 12 so that was on the
half that was on 11:30 now it's on 12
let's try it
again it's kind of scary doing that
but so that's the
half that's why it doesn't have a rod
here to change it like on some of the
other ones
so that's
1:00 that's
[Music]
130 and now it's set on two we can move
the hour hand a little bit to get it to
line up a little better with
two
um and we're coming up on 205 according
to the other
one that's pretty good all right so yeah
I think we're
uh I think we're looking pretty good so
I'm going to watch it for a while and
see what kind of time it keeps I think
it's going to be all right I watched it
for an hour um and it was off 1 minute I
adjusted the pendulum down a little bit
or adjusted the pendulum up a little bit
to speed it up um I've noticed that
whenever I put them back just how they
were a lot of times the uh the clock
runs a little faster so I think what's
going on is as they get dirt on them it
slows the clock down a little bit maybe
and um they adjust it with the pendulum
and then once you get the thing nice and
clean and with fresh oil on it and
everything it runs a little bit faster
um or am I saying that right maybe it's
vice
versa anyway I've been trying to just
leave the pendulum the way it's adjust
the way that it's adjusted whenever I
get it from however they had it the last
person that had it and
um uh it's never right you always have
tojust it so I guess it doesn't really
matter but there you go folks I hope you
enjoyed it um
that's a Seth Thomas I think that's the
first Seth Thomas I've done it's just
slightly different than the other ones
I'm going put it up on the Shelf we will
see you back here next week we might do
another radio video or maybe we'll be in
the mood for a clock video or we haven't
done a record player video in a while
who knows the possibilities are endless
so we'll see you then though I hope you
enjoyed it let me know what you think
should I should I continue to uh stain
that or would you just leave it how it
is I think I'm just going to leave it
how it is um
it's not perfect but that's its wear
that it's got over the years it's never
going to be brand new again
so hope you enjoyed it leave your
comments below and now if you like these
old clock videos I've done a few of them
on the channel here I'll put up another
one right here that you can check out
that I did a while back so I'll see you
on the next video
