Working On A 140 Year Old Creepy Looking Ingraham Clock!

Amateur Repair Time
257 followers
2 Video Views·Jan 7, 2025
ladies and gentlemen welcome back to
amateur repair time it's kind of late at
night and uh figured I'd start a new
video on this new clock here that I'm
going to be working on let me turn on
the light
here if I can there we go that's better
I knew something was off
um and the neighbors it's really late
and the neighbors are outside playing
music so you may hear a little bit of
that and you may also hear our clock
tick tocking away over
there that's that one that we that
Ansonia that we
fixed uh a little while back and I did
so well with that one I thought hey
while we're hot let's do another one so
if you didn't
watch a long while ago probably a year
year and a half ago I bought a whole
bunch of
clocks uh from a gentleman who had
passed away from from his family and
they were in horrible shape and just it
was a big huge mess and one of my
favorites out of all of that was this
clock now whenever I found it if you
didn't see that video there were just
tons of Parts laying around there's
stuff
everywhere and
um one of the pieces was this clock
right here with nothing in it so the
movement wasn't in it and the
face wasn't on it the guy had a habit of
taking everything apart and then he
never put it back together
again so some of the movements were
completely disassembled um I had faces
laying all over the place and they were
all in this big
Farmhouse uh and some of them were
filthy and stunk and everything else and
so I bought all these parts and you know
I know you're wondering well why did you
buy them well that was really I'm really
interested in clocks and I figured it'd
be a cool way to get like a ton of parts
so I did I got a ton of parts
and this case really kind of stuck out
to me I thought it was just an
interesting case um and there was no
movement in it and I looked around
through the movements that he had laying
around and found this one I kind
of could tell that this was the
face just because of how it fits it had
a cracked piece of glass on it that I
took out and
if you it's kind of hard to see
but the screw holes all line up
everything lines up right and then I was
able to find a
movement that appears to be the one that
was in it the reason that I know that is
because this case has a an adjustment
here on the front that you don't see on
a lot of them so this appears to be the
original face off of it that the guy had
removed at some point and then that
movement appears to be the move movement
that was in there because it lines up
and everything seems to be correct so I
put that back together I never got the
thing running or even tried to get the
thing running but since we were I've got
that Ultrasonic Cleaner now and we did
so well with that Ansonia I figured we
would try working on this one um I don't
even know what brand it is I would guess
session's just kind of looking at the
movement from here but we'll see so this
is what we're starting with so the face
we won't need for quite a also we don't
have the hands but I've got a bunch of
extra hands now the case
itself it's a little bit damaged up
here and it's splitting apart right here
but that can be
fixed
um you know what I think the the
movement was mounted to this back door
but the back door was not mounted to the
cabinet now that I remember let me show
you a picture of what I started with I'm
going to show you a couple pictures that
I took one picture that I took at the
gentleman's house uh you can see kind of
the mess and then I'm going to show you
another picture of them on my front
porch when I got them all back here to
the house
[Music]
okay so you may not been able to tell
from the pictures but um I figured out
after cleaning them and putting stuff
together that this back clearly
originally attached to this case so the
guy had taken it apart and took the the
the board out but it left the movement
mounted to the board and then I found
the the face with the broken glass on it
that I've thrown away
um somewhere in that stash too and I've
been trying to piece the clocks back
together this was one of the most
obvious ones where you could kind of
tell since it was still in three big
pieces right um so I think the first
thing we need to do is take this panel
back off so we can get back down to the
movement and then disassemble the
movement and clean it and put it back
together and see if we can get the thing
working and hopefully we don't have a
lot of bushing problems on that previous
one that you can hear tick tocking so
loudly and so strongly in the back the
bushings none of them were they had some
have been replaced already and none of
them were really bad to the point where
um or at least in my estimation where I
had to attempt to replace them I'm this
is amateur repair time so I don't know
what I'm doing right so bushings are
coming but I need to rebuild a few more
movements first to make sure that I uh
can handle the cleaning and the
reassembly and all of that stuff so
that's what we're going to do so I would
love to get this old clock to work
um cosmetically I'm not too worried
about that of course we'll dust it off
and everything but I would just I would
love to get the thing back together and
up and
running um and just piece all of the
parts back together and finish it up
where I can put it on the shelf and say
hey look at that look what we did okay
so I'm going to take the back door off
take these screws loose and we'll go
from there all right so it only had
three screws in it I don't know if uh
that was all I could find or if that's
what was in the this case or what I
can't remember
how I came about putting it back
together um and I'm trying to figure out
what's going on here if you look up here
there are these little
blocks and you can see how the stain was
kind of wiped on really quick now this
is by the way if you don't know about
these clocks I don't know much about
them but this is a really old clock so
this is probably
130 years old and this
case all right so this was done a long
time ago um very quickly and cheaply
even believe it or not in a factory in
America
somewhere uh so if you look the stain
didn't get under the blocks of course
cuz the blocks were
there you know getting stained
themselves and there's no stain here
because they just quickly wiped it on
right so up here there's some kind of
block missing it
appears so maybe that helped hold the
thing together down here it looks like
there might be something missing too
maybe oh that one's
striking um this one's missing
too get it
to
um that's I guess there was something
there there's no nails that have popped
loose or anything I think that was just
all held together with
glue so we could easily put it back
together and reglue it and I could clamp
it so I think that's what we're going to
end up doing I could put a little Brad
in the side of it or something but it
didn't orally have that and you'll see
it a little bit from the side so I think
I'll just try gluing it and if that if I
had that support that'd be better
but it's kind of
a complex angle there if you think about
it all right
so other than that the cabinet seems to
be in decent shape to me so we'll stage
it up here so we got something to look
at while
we're working on the movement
and here is the
movement look at this huge brass U
gong that's
misadjusted what probably happened is
this thing was flopping around since the
guy had it out of the cabinet and this
got bent a little bit or
something that should be striking
something maybe it goes over here there
we go it wasn't released the hand hadn't
released from the hour wheel
there or is that the hour wheel what is
that called the strike wheel whatever
um yeah
so let's see what we have here what
brand is this an Ingram
maybe I it says Ingram doesn't it
e Ingram
company
patent October
1878 and then there's another one a
little
newer November 11th
1879 that one was
72 all right so this it would be
sometime after
1879 in Bristol Connecticut now
sometimes you will find a
date stamped on it somewhere I don't
know if Ingram did them that way or
not I don't see it anywhere maybe
whenever we take it apart
to to clean it it'll uh it'll become
more evident all right right so I'm
going to remove the movement from this
board so we got a screw here looks like
it's original who knows if it's ever
been
[Music]
removed um one here where that board has
split
actually and then two at the top let me
see if I can get the movement off of
there all right well I see one bushing
on the back that looks pretty rough but
let's look at the bushings
here all right I don't know if it would
be considered a bushing if there's no
bushing in it little bit of play
there these aren't
crazy that one seems all right so that
is a replacement bushing I'm pretty sure
so it's been worked on at some point in
its
life there's another one
there and I don't know if that's a
replacement or not it could be that on
this thing they installed a bushing at
the factory on the Escape wheel
here you can see how dirty this thing is
the ones up there look all right and it
could be two that only certain ones ever
wear in the first place I don't know so
this is the
governor bushing there or yeah that's a
bushing original there
all right on the back there was a kind
of scary
one and again I don't I'm not really I
don't know that I'm capable of replacing
a bushing yet so we may just roll with
it
folks so that looks
fine that looks
fine that looks
fine that one's certainly fine that
one's fine and then we get up here to
this what in the world is
that I can't even tell what we're
looking at we'll have to clean it
first
um so yeah that's not
good and that it may be that you know
this amateur repair time it may be that
that's the one that always wears and
that it's
that's what bad wear looks like I don't
know or maybe it's just dirt is it just
filth I think that's where it's
actually like I can't quite even tell
what that is
so that's a little too much we that's
that needs a
bushing
um but you
know all the other ones look
fine it's just grease on that one
all right yes we got one there that's
rough really
rough um I just I don't think I have the
ability to replace that but we'll look
at it and see if we can figure it out
okay
so these Springs are a little scary you
know you can get hurt by these
Springs I think what I'm going to do is
go ahead and clamp them um I've got some
clamps but the the problem with the
clamps is you can't take them off off
once you put it back in the thing um so
I think what I'm going to do is use uh
some zip ties or like I think one time I
used a piece of a coat hanger or
something to basically tie this spring
off around its post here so that it can
be
removed um if I try to remove it like
this it's going to just spring out even
farther and then I'm going have a big
old mess on my hands and this is like I
think this is a 30-day spring I think
maybe not maybe it's just a n day
but they're fairly large and fairly
thick it's like a bad slap bracelet if
it slaps me right there we got big
problem look at that vein there I don't
want that vein getting slapped by that
metal um yeah so I got to figure out how
to get that back down a little more
concentric how it needs it and then tie
it off so we can safely take it apart
woo I'm going to get some comments about
this one I know all right so the problem
is if these spring out if the spring uh
is extended out like it was you can't
move these great Wheels
around so you have to not
only wind in the
spring but then you can't take it out
like that because if it's wound up
whenever you take the plate off big
problems so you have to wind in the
spring put something around it to hold
it in place so I've used an old coat
hanger that I cut
up and then once you've got it wound up
and you've got that wrapped around it uh
you need to unwind it and let the
pressure back off of
it so that it's
Unwound but at the same time contained
by the whatever you're using around it
like in my
instance uh the wire from the
from the uh coat hanger they make little
clamps you can put on but the problem I
have is you can't take them back off
once they're on there maybe you're
supposed to just leave them I don't know
like I said it's amateur repair time
folks but I have a decent understanding
of how it works okay so I'm ready to
disassemble it the next thing that I'm
going to have to do is take off these
pins that are holding the post the you
know through the hole in the post so
that I can take the top plate off all
right so I got all of the little pins
out these things
are they're just I don't even know what
they are it's like I guess they're
little
nails cuz they're
they're um
tapered
so so everything so there was one here
here here here and here so this top
plate is loose now but we got to be
careful got to be careful about this I
think we're good I think I think
everything's
cool to the best of my knowledge
everything's
good so we'll see what
happens so there's nothing holding
anything now so we got to be very
careful of the Escape wheel and it kind
of just very carefully comes
out I like a
some that thing is filthy
so we're going we're taking it all apart
my I am not great at cleaning anything I
never have been on the pinball machines
I'm not great at it
either
um but with that Ultrasonic
Cleaner makes things a lot easier for me
now you may be wondering why am I just
pulling them loose willy-nilly well it's
because I'm filming a
video with my hand in the way showing uh
how like go
back and I kind of know how they go
back this is a little bit different
setup than that anonia it's a little
more complex
actually and Sonia I guess they were
able to do it with one or two
less
pieces so they just sit in all of the
little
pivots we'll leave that one to when we
get the great Wheels out so these are
the great wheels so this is the time one
and I'm going kind of hold it just in
case it tries to spring it or be
sprung all right so it's fine so it's
still attached in the
middle um and it's held so that we can
easily handle it
do the same with this
one now just holding it like this you
actually would be strong enough to hold
this with your hand if it did come loose
but it would not be
good um and if you pull on this too much
you might get a spring out of the middle
and that would not be good either
so um yeah so the way I let it down was
I I took
the the spring retainer off of the
little uh what do they call that
thing can't remember what they call that
but it allowed it to just move out of
the way and then you can unwind it very
easily done okay so there is the there
are the two
plates you can also take this off I
think I'm I'm just going to leave it
though I messed with one
before um there's a screw right there to
take it off if you took this screw loose
this could go down farther and then you
can get to that
screw but I think it might be all right
the way it
is and then this hour wheel or whatever
they call it the strike wheel if you
pull that little clip up it pops out of
that little hole
there then you can slide it off it's
like a little retainer
clip and you know you just try not to
bend anything but if you do bend it you
can bend it
back all
right so that's pretty good this is a
little tricky though I'm always
wondering how it goes back I should be
able to tell because of all of that wear
on the
brass all right so I'm going to go put
it in the ultrasonic cleaner if you
didn't see that we messed with it on
that
andonia
clock and then we'll see how clean this
stuff can get you can you can
see you know they're filthy I mean
absolutely
filthy this gong here I'm not going to
put in there so that'll be our what we
measure it by it was everything was
about like that let's see if I've got a
key that's about that filthy
is that a good
representation no that's too dark
is I don't want to leave anything out
and not get it clean that's a pretty
good one there so this is the I think
this is like a windup key from the back
of a um alarm clock right
and it's a very similar patina so we'll
see
if this gets better I won't do this and
we'll be able to compare that to some of
the ones after we get back out of the
ultrasonic all right so I'm going to go
drop those in and then we'll uh we'll
see how they turn
out well boy that stuff really cleans up
well um it's just incredible really
for working on a clock that's the best
thing I ever bought it just it really
helps me get them at least somewhat
clean whenever I tried to clean them by
hand I'm just horrible at
that now someone who really knows their
stuff could probably get them even
cleaner than this
but so I have
decided I think we're going to try to
put a bushing in that one bad bushing I
mean it's really
rough so I believe it's this
one it's hard to even tell what they're
doing I think what they were doing was
beating on the The Brass there trying to
get it to slide down and take up some of
the
slack
um I don't even know if they were doing
it in the direction of the
now you can see over here that's
the other
side and I guess from the factory it had
a bushing in it or someone has placed a
bushing in
it that's like an oil sink there I
guess um so it's just that
one so this is the back side of it
man it's got quite a bit of
wear but what is all
this it it appears that
they sometimes I've seen it looks like
maybe they try to cut the brass and then
hit it and it it pushes it down or
something I guess that's what they're
doing I don't know it maybe that's a
really high-end way to fix something I
don't
know I would think it's not but it could
be
so that's what we're working with so you
see how that hole is very elongated so I
need to figure out which direction it's
moving
um which you can kind of do by putting
the power train
together and then just seeing which way
it pushes it and then that tells you
that's the way that it's
moved
um when I first looked at it I thought
this was a hole too but it's not it's
where they've been beating on it and
just just crazy so I'm going to try to
hand ream that hole out if I can figure
out which side it needs to go on I'm
going try to ream that out with a little
hand reamer and then beat a bushing into
it there's probably other ones that need
it
too but that one's certainly the worst
and it's on the time side
you can see if you're looking at the
back of this plate it didn't get it
completely
shiny you can also see though that the
U there's not like crazy wear except for
that
one maybe that's the one that just
really wears on this particular type of
movement okay so let me see if I can
figure out which way it's pushing it is
it pushing it that way or is it pushing
it that way so if it's pushing it that
way that means that all of the wear is
on that side it's pushing it that way
that means all the wear is on this
side okay I've temporarily put the Great
Wheel the first the second wheel the
third wheel and the fourth wheel or
whatever they're called I guess that's
right the first four wheels and then the
escapement wheel back uh in place and
I'm just holding
the the frame together with my hand okay
and then I wound it up just a little bit
and if you
look under pressure
I couldn't resist
um that pivot is
up so yeah where they've been beating on
it was where they were trying to beat it
back
down hope you can see that am I right in
the
shadow so see how it's
up so under the pressure of the train
that pivot has moved up so the center of
that new bushing we want to be down see
how it's jumping around and stuff now
these don't have to be perfect these
American movements can have all kinds of
slop in them apparently but that's
pretty excessive so we want the center
of the
new bushing to be down not up we're
trying to move it downwards back to
where it originally was it has
moved we'll say North the in the way I'm
holding it um
as it's
worn okay so that helps
me okay so I've got this little
assortment of bushings it says the
system made in America this is um the
K is it
kwm something system there's the there's
a German system and then there's an
American System they don't have it named
on here because I'll bet this is like a
knockoff or something but about these um
and you see it says height 1.4 mm so
that's the thickness of the bushing
which should be similar to that or good
for
that um and then there's all these
different ones and basically if you look
at this little
chart the
diameter of them
all is 2.7 mm
so every one of these bushings fits the
same size hole in the plate and then the
inside of the bushing is the
bore 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8
1.9 1.9 so the 2.7 mm is this reamer
right here so if you run this through
one of these
holes long enough it will cut that
sucker
um until it is approximately 2.7 mm and
then you can press the bushing into it
beat it in with a hammer and then um you
will have a brand new hole the reason
that we had to figure out where the wear
was is because I want to make sure that
like if I put the bushing right
here
that
wheel is not going to be in the right
spot it's got to be right where it
originally was so it's it's important to
know if it was originally here or if it
was originally here well we just figured
out it was originally
here so I'm I'm literally going to take
this reamer by hand and start running it
through there and cutting it trying to
stay on this side of the
hole so that's where my Center is and
once this entire thing will get through
there it's a little aggressive I
probably should have two of them to do
it but we're going to do it with this
one once this entire thing will get
through there it will be big enough to
take one of these bushings we can put
the bushing in and then it'll be have a
brand new tight bushing in place so
that's what I'm going to
attempt all right now if you have messed
with these you can tell that my handle
is the wrong handle not my fault
folks I ordered the right handle they
sent me the wrong handle so I made it
work or I'm trying to make it work
it's hard to do this where you can
actually see it you you know I
understand you can't see it that good
but I have I believe reentered the hole
or close to
it and now I'm just cutting it all right
I think we about got
it yes and I tried to keep it as
perpendicular as I could
okay I don't know if that's perfect or
not but that's going to have to do so
that's our new
Hole uh so now I need to try to put a
bushing in it I wish I had a and
remember folks amateur repair time this
is not professional expert repair time
this is amateur repair time um you'd be
better if you had a champer
bit I don't really have one of those
where it like it kind of bevels the edge
of it so that your bushing will fit in
there
better but um that's what we're working
with and I mean I believe that has
repaired it I don't know if it moved it
down far enough
but so you know we may have a situation
where the center has moved
slightly I'm going to pick a bushing too
that's not like super super tight just a
lot tighter than it
was and uh we'll see if I can get it to
sit in there all right so I picked one
that was 1.5 mm it seemed like it was a
pretty good fit but there's a little bit
of wiggle room in it the reason I'm
doing that is in case I'm off you know
which I probably
are um we could try to eyeball it should
we try to eyeball it within a
millimeter you know you can tell by just
looking at the other plate really
so was that the same distance from that
corner as
that if you take into account it's about
the
chime okay yeah if you take we're almost
at midnight if you take into account the
oil well on
that I think we're pretty close I mean
it might be a little
off
but okay yeah so I was I just pressed it
down in there with my hand and then I
tapped it a little bit with the end of
the
reamer um so now I'm going to put
something under it so I can really kind
of get on it and try to set it down in
there where
it sits all the way into the center of
the plate where it needs to
be all right so it was able to see
really easy it was not hard at
all so we now have a 1.5 mm hole in
there
to fix their boo boo all right
um so very cool so I think what I'll do
is uh I'll put
the that one side back on and then we'll
just see if it looks like everything's
moving freely all right so I got them
laid back in
there ooh I like how it looks so far
so let's put a little wind on it and
just see what happens and remember it's
just sloppy in there I don't even have
the plates nailed together or anything
let me get a little wind on it and then
we'll try to pick it up if I can keep
from bending the Escape wheel while I do
that this is not the best way to do this
but it's a good test isn't
it I mean obviously it's moving
fine and again I don't have anything
holding it in place
uh
uh it likes that doesn't it it's happy
as hell to have that new uh bushing in
there look at me Mom I can
[Laughter]
fly all right folks I think that'll do
it for this time next time we'll put it
all back
together and then uh oil it and see if
we can get it back in the cabinet we
still have to uh find some hands for it
and all of that but I'm really
encouraged by that the moving the going
train seems to be working
great so I
that's that's better than I thought it
would be actually I think I did pretty
well there I'm I'm quite happy with that
the thing wanted to
cooperate so hopefully that bushing will
serve it for quite a while you know this
thing uh is 10 and 30 years old or
something like that and you know it had
to wait 130 years for me to fix that
bushing um I'm I'm not going to be here
in another 130 years Folks at best I'm
going to make it another
120 so you know if the thing screws up
in the next hundred years and they bring
it to me I'll probably fix it for it
again so all right folks so there you go
hope you enjoyed it leave me leave a
comment down below let me know what you
think and uh uh we'll be back next week
where we'll put it back together the
rest of the way and get a nice little
tick tocker out of it hopefully um I'm
just amazed at how clean though that
Ultrasonic Cleaner gets everything
incredible all right so there you are uh
I hope you enjoyed it leave your
comments let me know what I did right
what I did wrong and we will see you on
the next video if you like these clock
repair videos here's another one you can
check out amateur amateur clock repair
videos see you next time
