This Beautiful Antique Clock Was Sitting On a Junk Table At The Flea Market...

Amateur Repair Time
257 followers
3 Video Views·Jan 7, 2025
ladies and gentlemen welcome back to
amateur repair time I've got this
awesome clock here today we're going to
mess with and I've got a some new stuff
to do it with so we're going to have
have some fun today I've been doing a
lot of radios and stuff lately and I
haven't done a clock in a while and um
whenever I first decided to make this
channel I'm really interested in the
clocks I really love the clocks got a
ton of
um I'm fascinated with them but the the
thing with them is they're a little bit
harder to fix than the radios are just
my personal opinion so I'm my um goal
was to have kind of equal clock repair
radio
repair phonograph repair um and then
kind of like a random electronics repair
but we've been slacking on the clocks a
little bit so we're going to mess with
this beautiful o' today let me tell you
where I got this thing I'm in Charlotte
North Carolina and on the on the
weekends I go down to Jefferson South
Carolina uh with my brother Donnie uh if
you haven't seen his channel we've got a
he's got a channel here on YouTube
linked down
below uh my brother Donnie
uh and I meet in Jefferson we've got a
bunch of buildings down there that we
mess with and do uh repairs on and rent
and things like that and uh um we've
been going to Hartsville South
Carolina um is it
Hartsville U not Darlington Darlington
South Carolina where the racetrack is
and I've been filming some videos down
there about mobile homes and things like
that and just near uh Darlington is
Florence well if you go down to Florence
there's a flea market that's open on
Sundays Saturdays and Sundays and it's a
pretty cool flea market it's an old
school kind of set up and they get a lot
of old stuff in there I hate the flea
markets where you go and everything's
brand new you know some people like that
stuff you can get all that at the dollar
store I'm not interested in that at all
but a you know a decent flea market
ought to have some some used stuff so
that one rarely disappoints so we were
down there and walking around and uh
this lady had a whole bunch of
stuff and she's there every week but she
had a whole just a ton of stuff laying
out and on the table was this clock
sitting just like it looks right now and
so I walked up to her and I was like you
know you got to play it you got to act
like you're not interested you know but
this is a really cool one this is a
little different than they usually are
it's a little more ornate and it's just
worn enough that I like it you know I
don't like them to look brand new I've
got another wall over here full of
clocks too
and then I've got a bunch more this is
um this is the Majestic radio that we're
in the middle of repairing and that's
the FI Co that we're in the middle of
repairing
um didn't I have another oh yeah I've
got a Emerson radio over here we're
working on too but I kind of wanted to
take a break for them from them for a
little bit so that we could do a clock
so anyway it's sitting there on the
table and you know you walk up you don't
really want them to think that you're
all that interested I go how much on
your old clock the lady
goes oh that's a nice one I go here we
go here we go and she goes uh how about
$10 because this it might be worth some
money if you're able to after you fix it
right and she she doesn't know me but I
guess she just assumed that if I want an
old clock I must be I'm going to fix it
so $10 which is a good deal but you know
what I said right I said
[Music]
U would you take eight and she goes oh
yeah I'll take eight and I gave her
eight bucks for it so I got her for $8
now a lot of times anymore as I get a
little older I don't even
negotiate but something about the way
she was acting I thought this lady sure
is I'm sure she'll take $8 for it and
she did she may have even took five if I
just really wanted to beat her down but
I didn't want to I think she was happy
to get her eight and that's why she told
me 10 so
anyway uh we're going to check this
thing out and I have a new tool that
we're going to
use I finally splurged and I bought an
ultrasonic
cleaner now just to calm all of you down
no I am not going to take the whole
movement and just dunk it in there in
one piece I'm going to take it apart
like you're supposed to but I've got an
ultrasonic cleaner we're not going to be
able to finish this thing in this one
video but
um I kind of want to try that out a
little bit I've been messing with it a
little
but I want to check it out so what is
this thing well this beautiful old clock
has the label on it I love it when they
still got the label on
them this is an Ansonia clock I don't
know how you pronounce it
Ansonia Anson
Ansonia it was made in New York right
here in the good old United States of
America
now I have hanging on the wall this
beautiful regulator
here and it's a big one that thing is
about 2T tall and that is an
Ansonia see the logo on it
there so that's pretty cool and I've got
probably some other ones laying around
uh let me just say too near the
beginning of these if you're not in the
in the
clocks they don't have a lot of value so
I'm not bragging none of this stuff has
a lot of value if if you're not in the
Antiques you may not realize that but
this is not an expensive collection
these are all inexpensive and to be
honest I wouldn't have it any other way
I don't want a bunch of expensive stuff
I want the the stuff I like is the stuff
that normal people bought you know so
the these are normal people
clocks you know what I mean they're not
the top-of-the line super rare super
collectible there's only 100 of them all
that no this is some lady bought it and
put it in her dining room and used to
listen to it uh while she was cooking uh
dinner each night or something you know
what I mean this is like real people's
stuff and they're not worth a bunch of
money um and a lot of these in the back
I haven't fixed yet so anyway this one
is a little bit more fancy than they
usually are but it's still it's not a
really
expensive clock back in the day and it's
certainly not now so it's not worth a
whole bunch of money or anything like
that it's just freaking oozing cool
Factor that's all I'm saying so this
thing is old it is an 8 day
blackbird so they called it a blackbird
just because of the model of it now
there is a patent on it or
something it says prize
medal
awarded Paris
Expedition Exposition I'm sorry the
Paris Exposition in
1878 so this probably was you know in
the few years after
that uh 8-day Blackbird strike now if
you may see it I didn't notice it until
just now but there is some text I mean
there was some writing on there let's
see if we can read any of
it a lot of times a uh repair a clock
repair person would write something on
it whenever they repaired it or that
might be somebody's
name looks like it keeps going
H can you tell I can't tell if you can
tell any of
that put it down below is
that
[Music]
my my
maybe and that looks like e
well I can't read
it says None genuine without this
trademark and they have the Ansonia
trademark which is also what we were
looking at on the front of that
regulator and Sonia Clock Company New
York USA so this is their Blackbird
model I guess name that because of the
the look of the uh the case
so it's all kind of black I'm trying to
be very careful cuz the door is
loose so on it down here where the door
is loose it's been scraping the cabinet
a little bit now I am not going to
restore this thing to like new condition
I'm not capable of it and I don't really
desire to do that either but you can see
where it is actually worn white so I
think the way they made this
was they carved
it and then they painted it white which
is what you're seeing
here um maybe they sprayed it white so
it would get down in all of the carved
areas and then they maybe rolled it
black over it because like if you took a
a paint like a roller or something with
black paint on it and rolled it over
this it would only paint the the Raaz
area the carved area would stay whatever
color it was so I think they may have
done it that
way um but it's been dragging down here
on the bottom probably for a long time
and it's worn the black paint away to
where it's down to the white painting
paint That's underneath it so there are
all these
little I don't even know what you would
call that I've seen that kind of design
on stuff before it's almost like a
floral thing
maybe um and it's got like kind of a
geometric design but also this the
floral thing over it yeah see that's
kind of a floral thing isn't
it it's just really cool it's not super
fancy but it's just a little something
extra you know that you don't usually
see on them now the a lot of them had
pressed wood you know they would have
like the the rooster top and everything
um but usually not two- tone like this
where it's black with white paint that's
it's just really cool it almost looks
Victorian and I think it's in great
shape I mean it's not new or anything
but it it just looks really good I think
I love the the patina of it I'm not a
huge patina person but on this I think
this if we can get this thing ticking
and talking we're going to be awesome uh
the face little faded but I'm going to
leave it exactly like that there's no
way I'm replacing
that we may try to clean it a little bit
or something but maybe
not uh we are going to clean the
movement and then the
glass it just has a really nice design
and it's fairly intact I mean it looks
pretty
good I love how for a while too they
like with some of these uh glass fronts
the the design on it it's not um
symmetrical it's kind of a Breck Brave
design you know this looks like
something you would have saw
um in a in a home in the 20s so I'm
going to
guess I don't
know trying to just guess a year we saw
the the the patent was what what did it
say
1878 not the patent the award thing that
it's bragging about
1878 so it was after
that um I if there's if they're bragging
about something happening in 1878 you
wouldn't think it's too long past that
so I'm going to say this is not in the
1900s I'm going to say this
is 1890 or so just
guessing maybe even a little older than
that okay so the one of the hinges is
dis is disconnected or something let's
see here we got be very
careful
okay oh it just needs couple couple
screws in
it yeah so the original hinge or I guess
that's the original hinge is still there
it just doesn't have screws in
it you'd think at some point somebody
would have just took one of the screws
out of up here that'd be the easiest way
to do it but I've got some little screws
that
can fix that right up maybe we'll do
that' be one of the first things we
do and here is the back of the door is
that the look at this little
thing what is that that almost looks
like an a for like Ansonia but they did
I think their logo is completely
different but pretty cool I have uh no
doubt in my mind at least maybe you
think different that's that's original
that's just the original design on the
front of a
blackbird uh clock and that's just how
they
look okay now this one is a little
different than the ones I usually get
because it's pretty much chromed and
it's a little more fancy than the ones
that I've seen
[Music]
um let's try winding with the
alarm time to wake up
people all right there's not punch to
that though so you would imagine that
that would still
work and Sonia and Sonia clock
that's the I don't even know what you
call
that it needs a nail or something to
hold it up into place the one side is
still attached let see if I feel
anything down into it no think we might
so we're missing a screw or a few
screws and then we
have this uh
fancy
[Music]
looking what would you call
it
Plum Plum Bob I haven't worked on one in
a while let me see if I can rehang it in
there I think I can let's see if it
looks like it's right pendulum that's it
all right let's see if it's got any kind
of wind at all on
it now I'm going to leave it adjusted
exactly how it
is and at the end of our
videos the imagine it'll take a few to
go all the way through this we'll see if
it actually um
let's see if it actually keeps decent
time with it adjusted like
that I think we've dropped out of our
Tik Tock here okay
um well I guess the first thing we're
going to do
I think I'll go look and see if I've got
a couple screws to put in that hinge
just to make sure that doesn't end up
snapping or
breaking um and then we're going to go
ahead and take the face off of it I'm
going to take the movement out we're
going to disassemble the movement um and
clean it in the
ultrasonic um is it ultrasonic yeah
ultrasonic that's how you call it right
clean it in the Ultrasonic Cleaner
disassemble it put it all back together
again and start from scratch and we'll
see how worn it is I'm probably not
going to do any bushings or
anything I had just haven't got to that
level yet where I'm comfortable with
that I do have a bunch of bushings and
the tools and that kind of stuff but
um I'm not to the point where I can
comfortably do that so I'm we're going
to unless this thing's just heavily
damaged which hopefully it isn't uh this
is going to be cleaning and reassembling
and seeing if we can do that and get the
thing up and
running um
which it may be fine now if we just wind
it up but I don't you know if the
thing's dirty and filthy and has a lot
of old oil on it uh you run the risk of
really screwing up the pivots and stuff
like that if you run it dirty like that
even if it will keep um keep
time okay so um let me go see if I've
got some screws that'll fit that and let
me uh begin taking this thing apart all
right so step one they actually weren't
screws they were just little Brads and I
I've actually had just the right thing
too so these are the original
ones and the reason the door was
dragging was because those were loose
and so the hinge had dropped down a
little bit those had loosened
up so I tapped them back in a little bit
and then these are the ones I
had pretty much the same exact thing I
didn't buy those those came from a whole
bunch of clock parts that I bought and
the guy had just a bunch of boxes of
parts and stuff and he just happened to
have some of those in it I've since
sorted those all out so I've got a box
with small Nails in it and had those
those are like just little they're like
little tiny tacks they're only like an
eighth of an inch long or something like
that and so then this thing had a
similar thing I used the same piece
that's the original one so the one I put
in is a little
bigger uh but it didn't go through the
back or
anything so it's just long enough but we
got that back and I put I just put it
back in the same hole it was in which I
would assume would be kind of where
we're at now one of the things that
that's good for is it helps you level
it um you know you want the I didn't
adjust it or anything but you want that
hanging in the middle if the clock's
like this well you know that it's not
level so you can you can level the clock
up or you could actually bend the
um uh the
crutch inside of it
too um but because of that I was able to
lift the door a little bit and if you
listen it is not
dragging let may have paused that it's
not dragging
now so that's probably I would
assume how it was originally um It lines
up good on the sides and this
hook click goes right in place so
hopefully that will keep the door from
breaking off while we work on
it so uh next up we need to remove the
hands
which is going to be done by removing
that
pin so we'll get that out of there and
the the little
retainer and the two hands should come
right
off all right so there's the little pin
I was able to just pull it out by
hand um didn't have to grab it with
pliers or anything
I know I'm on the same side as the light
but I guess if I use my right hand I'm
left-handed
though easy
peasy I've got a bunch of these too that
I've got from the other guy so he had it
placed where the uh it's
concave so now I know whoever was that
worked on it before and I say he it
could have been a lady not not trying to
be
sexist that's a little concave
too and then this of course will only go
the one way I wonder if I'm safe to put
these in the cleaner I think I won't I
think I'll leave them off because I
don't know if it's going to try to take
that paint
off hm I might have to to do a
test all right so our hands have been
removed this thing I guess we'll have to
wait till we get the face off okay so
I'm gonna take the face off it's just
got a couple screws on
it that's next all right face came right
off of course and there is the movement
I wonder if it's
been removed it's ever been out
H are those new
bushings yeah somebody's rebushed it
right or is that factory the factory
they usually just had the holes in the
plates didn't
they yeah there's a repair there
yeah the whole thing's been
rebushed I
think very
interesting well I think we still well
it looks pretty clean though I don't
know if I can get it much cleaner than
that h
is that damage on that pallet I don't
think it
is yeah it's been serviced and it's been
rebushed I think is that what you call
it and it looks pretty clean to me I was
expecting much
worse yeah I think maybe we oil
it I don't think I can get it much
cleaner than that I mean I think maybe
we just oil it and go from there I
didn't realize that
the I think all the ones I've had the
Springs are up more more towards the
front but yeah that's a clean little
movement
really maybe we make it straight right
what do you
think oh no not
quite didn't quite have enough
juice that's pretty neat how they use
the same Bel for the alarm and the uh
the
strike it could just be that there's
just not enough wind on
it h yeah it looks a lot better than I
thought it
would interesting
I don't know how you set the alarms on
these really I haven't messed with that
on
one and yeah it's definitely been
removed you can see where they put it
back in
different maybe that's a completely
different
movement
H there's a couple holes down here but
some I've seen on these where the um
the case will have a couple extra holes
just because they had them kind of
pre-made at the factory there was like a
jig where it's kind of laid out and it
kind of depended on whether you put the
alarm in or what you put in it but that
one there you can see where it had like
a pressure indentation on it where
something else was there before so
probably either not this movement or
this was adjusted differently on the
movement H okay so I think I'll remove
it it and then we'll look at the back of
it and see um see what kind of condition
it's
in well I think for the sake of the
video we'll still go ahead and take it
apart
um I always love these repairs like this
look at
this so I think that's already got
another bushing in it and remember this
thing is old old old yeah so I think
that bushing there and if you don't know
about clocks I don't know much about
them but that
little um let me show you example so see
how in the middle there there's like a
round circle that's where because
they've put a bushing in it originally
it would have just been a hole so that's
a bushing as
well and if you look see how that moves
around in there a little
bit so you don't want too much of that
now on a this wheel here it's not that
big of a deal I'm not really talented
enough to replace those yet I'd like to
get there eventually but like see how
that's all eight up and everything
that's because that's been placed in
there and see how the the pivot is
moving around inside of it that's
because it's worn a little bit or it was
the wrong size when they put it
in so someone has put all those in so it
originally would have just
been let mean I think on the back they
didn't do all of
them yeah so that for
instance so that's the
middle wheel of the thing see how
there's just a hole in the brass plate
and the pivot just sticks through it
that's how it originally would have been
and then at some
point look at that wow I have never seen
anybody do that at some point um those
start to wear you know and so to fix it
you go in and you put a bushing in it
what in the hell is going on there so
see it does need cleaned now that I look
at
it so on the back they didn't do that
many
bushings it's just the
[Music]
original pivots so on the
front and I could be wrong it could be
that the factory did it like that but I
don't think so on the front everywhere
one of those goes through they have
replaced it with a
bushing so what you do is you have a you
have the holes all wallowed out and so
you wallow it out bigger big enough that
a bushing will fit and then you press a
bushing down in there that's just the
right size where it's going to
um is going to get it no it's just the
right size where it's going to let that
original
pinion go through
there yeah so they've done all of them
so what's going on here
is they did the same thing there is a
new bushing
there so that's been a bushing that
someone replaced but then it was too
loose so to tighten it up they took a
little piece of brass and laid it up
against the pinion where it was touching
it and then soldered it in
place to push it up against one side of
that bush so if you had the
um that seems pretty tight if you had a
loose
one and we'll look at the date here in a
second so if you had this loose
one if you put something in it that was
always pushing it to one side it would
take up the slack and the bushing but
it's really not a good idea you know
it's not the way you're supposed to do
it but that's the way they chose to do
it okay so let's see if this has a date
on it
and Sonia clock Co you see all the green
stuff yeah it definitely needs cleaned
now that you look at it sometimes
they'll be a date here somewhere is that
a
six maybe it's up
there it's pretty dripping with oil
they've they've been oiling the crap out
of
it all right so this is what we're
starting with basically I'm just going
to try to clean it up and put it back
together and see if we can get it all
the way back together from a
complete situation right now back to a
complete situation when we're
done yeah I think that's a six
[Music]
so
1886 Maybe
all right so the way that they're held
together is just with these screws if
you take those apart this whole Plate's
going to come off and all of
these parts are just fit into the
plate where their pivots are so you kind
of need to know what order they go in
and all of that and we're about to take
it all apart to where we don't know what
order it goes in anymore but we'll see
now you also have to let down the
Springs so the Springs um hold a bunch
of tension and if I take this apart and
that's still wound it's going to try to
unwind and you can get messed up um they
make tools to do that
or you can pull that little click there
back which is what keeps it from moving
and unwind it by hand uh with the
key just let it
down there's also some wire wrapped on
these metal pieces these
little these parts usually that is used
as a spring so that wire wrapped around
there and put over there is what makes
that spring
back so there's that one you can see
there's one there above
it and I think there's usually one up on
the
top yep that
one so you got to kind
document how those
are so you can put it back how it
goes all right so I'm going to let down
the springs and
then disassemble it all right so I've
got the screws out we'll see if I get
cut I Unwound the Springs we should be
good
we should be
good oh had a little bit left in
it now whenever you do this since
the um Bal what do they call it I
haven't worked on these in a while I
can't remember all the
terminology you got to watch this sucker
because it goes through but it's also
hooked back there so you got to be very
careful but you see the whole scenario
basically the whole this plate needs to
come up and off so I got the plate up
and off this popped out from somewhere
we'll find out where it goes
eventually um this kind of fell out too
the hour wheel and the minute wheel I
guess those are called
I will need this video later to put all
this back
together so the
spring you got to be careful you don't
want to bend a
tooth that actually looks really good
look at that very clean for its age
what do you think are we ever going to
get back
together so this is under a bind which
tells me this probably still has tension
on it even though I let it
down but it's not much let me mess with
that so I don't get cut all right so
we've got it all apart
no one was injured in the filming of
this
video um it would probably be best to
take these off of
this you
know is this called the first wheel it
probably be better to take those off but
I'm not going to I'm just going to put
them in like
that um and then we'll re oil them
afterwards they're greasy actually if
you look at the plate you can see the
grease on it but I have seen people I
respect say that you can use the same
oil on those that you use on the um
pivots and things
so cool with me and there is no date on
it other than a six stamped on
there and then on the back it said there
was a patent in 1978 so you would assume
it's newer than that if this is the
original movement so it's probably an 86
movement just guessing um I'm going
to remove that little clip so I can take
the hour wheel off and I was able to get
the um Escape wheel out without bending
it or
anything so I think we're good so we've
got one two three 4 5 6
7 8 9 10 11
12
13
14 15 we've got 15 pieces and the two
plates basically I'm going to leave this
on it seems like it's
fine okay so
um yeah let me get the hour wheel off
and then we'll go dunk this stuff all
right so I bought this ultrasonic
cleaner and I've been messing around
with it a little bit it's seems to work
pretty good so I've got
Zep uh Citrus Degreaser in it that I'm
trying first I've heard about 50
different things people try in it but
this seems to be working pretty decent
so I'm going to roll with it and I've
been heating it up to 50° which I guess
is
Celsius and I've been running the things
in it for about 15 minutes so it's got a
basket and you just put whatever you
want to clean in there dip it down in
the zap and Let It Go for 15 minutes it
makes the most ridiculous noise you've
ever
heard um I guess I'll show you here in a
minute but um and I'm just putting stuff
in the basket to where it's not touching
each other and I'm trying not to put a
bunch of
um non alike Parts different Metals in
it because it um it can actually
electroplate mess up you know um so it
looks like I've got enough room for
those and I might put those two main
Springs in there
um with it and then on the next run
we'll put all the little gears and all
that stuff so all right so it is slowly
heating up and uh I've got it full up to
the fuel line and it's everything's
submerged I'll start it just so you can
hear this annoying incredible racket
that it makes so I've got it in another
room where I don't have to be in here
with it listen to this
yeah so that's a little Annoying all
right so I'm going to run them for about
15 minutes and we'll see what they look
like all right so let's get a gander at
it looks like there's still some grease
right there in the
middle need a little more work
here's our plate you can see it cleaned
it up didn't get it
perfect was pretty clean you can see
what it did to the solder
there but if you look at like the
bushings it seems to have removed all
the extra oil that was around them or a
lot of it at
least what I'm going to do is I'm going
to take a toothpick and
just run a soft toothpick through each
one of those just to make sure you get
all the gunk
out and also I
um it's pretty
clean also I um rinse them off of course
and then dry it
so that is not actually greased that's
just where it's actually rubbed
it but it does make it look pretty
good it's a pretty effective way of
cleaning them up I've been wanting to
get of these for a while and if you
don't like how clean they get of course
you can always attend to it by hand a
little bit too or you can just run it
longer you
know so I'm going to clean these up a
little bit and then uh do the other ones
all right so I got it all out of the
bath look at
the I had mixed feelings about this
whenever I first started messing with
them because I
thought you know you don't want it to
look brand new it's hund some years old
but really it doesn't look brand new cuz
there's wear and stuff on it but
it it
um it's just amazing how this stuff
cleans
up and this really helps me because I'm
not good at cleaning things on the on
the on our uh pinball games you probably
see that but look at the condition of
that this is a this is a part that's 120
years
old and you know one of the hardest
parts to clean is down in those lanterns
they call them
you can see it's not completely 100%
clean but it's a lot better than it was
and
um I'm completely happy with
that so the main thing that you're
trying to do is you want these to be
polished so you want the
pivots the pinions
to be nice and Polished so really you
could probably stand going over those
again after you get them out of the
bath but that thing really that thing
really helps me um that's that's just
something I wasn't really great at but
this this will help me get them at least
somewhat clean and ready for new oil
look at that that's 120y old part
pretty incredible and look at the I
think they call this the fly I
think look at
that so cleans it up really
well so so now we got to try to figure
out how it goes back where did where did
it did this go here I don't was
it was maybe this was maybe this was
here I
don't
H I don't know folks I might to think
about this for a little while well next
time we'll put it all back together
we'll put it back in the thing we'll oil
it we'll put it back in the clock and
we'll see if we can get it to tick and
talk so until
then y'all uh y'all uh put up a good
word for me trying to figure this
out I'll see you back here next week and
we'll put her all back together now if
you like these clock videos and you want
to see one that I did a little while
back check out this video um and I hope
you'll enjoy it we'll see you on the
next one this has been amateur repair
time
