Gotta Have 2-Tub Outdoor Sink

DirtFarmerJay
310 followers
1 Video View·Jul 27, 2024
hey dirt farmer J here from dirtfarmer
j.com it's been a while since we told
you about how to make a great outdoor
sink well it came time to do a double
bowl sink here in the greenhouse we're
going to walk you through it and there's
a complete parts list in the description
stick
around hey dirt farmer J here from
dirtfarmer j.com we love having an
outdoor sink and it became apparent that
it is a fantastic asset in the
greenhouse as well so we installed
another one two bowls with a sprayer and
we are able to find the parts and the
whole kit and the components relatively
inexpensively and at our local orange
big box Home Improvement store there's
two main components to this episode one
is the Assembly of the sink itself and
two is installing the faucet on the deck
above and putting the side spray and
connecting it to an outdoor hose but
we'll show you how to do all of that
let's go ahead and get started the first
thing you see here is uh the box that
the sink unit came in they pack it very
efficiently so it was a lot smaller than
I thought it was going to be for a two
Bowl sink this is the musky
24c uh and we went ahead and got that
opened up and uh but before we go and
look at all the different parts there
the second thing I want to show you
really quickly is all the plumbing
components that are going to be used in
there and you can see in this parts
diagram everything laid out and it may
look a little complex but you can come
back and refer to this and take a look
at it so now you've got an overview of
the parts diagram let's go ahead and
open the box and show you what's in
there so the first thing we did is slice
it open we took out the two tubs stacked
them there to the side you can see
they're approximate size and then the
next thing we did is uh got the parts
kits out of the box you can see them
nested in there very nicely and started
open those up now the first thing you
want to notice is the faucet you can see
here Mark if it matters to you it's not
a very expensive faucet and it's kind of
a short neck on the faucet here uh we
wish it was a longer neck but for what
the price point is and you'll see that
in the description below uh it's
functional but it is made in Taiwan if
that makes a difference to you now next
thing we did is open up uh the rest of
it with the drain kit uh where the uh
where it was going to connect to a P
trap if we're going to use that uh all
of that was in there nested very nicely
and packed safely none of it was damaged
when we opened it up and it was really
great the other thing you'll see here is
the leg kit that is in there that is
used used uh on the base of the the um
the sink setup and those legs come with
a set of levelers but all that is in
there so as you can see as we open the
box uh you can see the four gray uh
angle uh legs that are going to be
inserted and kind of pounded into the
base of the sink uh and then also the
levelers and the hardware that does that
so all that is there now you'll notice
that uh this company uh makes it very
efficient in that they use the same
boxing system and uh the same set of
instructions three different sets of
instructions for each of the models they
put out uh and here you can see all
three and the final one is the one was
our model so we discarded the other two
and just began working through the
process quickly to put it together
before we get any further I want to say
thanks to Dirt Farmer Maggie and to my
friend Mike who assisted in the Assembly
of this so you're going to see them
putting things together and making this
thing happen so thanks guys I really
appreciate it the next step we took is
assembling the bowls together using the
plates uh that join the two and those
are done with screws and a clip in the
back I used a pair of commonly called
vice grips or locking pliers to hold the
back drove the screws with a Phillips uh
bit in my drill driver and was a able to
put those together uh those all went
together very nicely now the next thing
uh you need to do is drill the holes for
the faucet and because the faucet sits
straddling both bowls it is the
innermost corner at the back on each
Bowl uh the left hole on the right sink
and the right Bowl on the right hole on
the left sink that are drilled out for
the stems of the faucet to go into so
those are drilled out uh using um the a
whole I think it was a/ inch or so but
you'll size it you can see uh there's a
ring there to cut it out you can't miss
unless you just completely try to uh but
you can drill those out and then test to
make sure the stems of the faucet drop
through cleanly now once that is done
it's time to flip the unit over here and
here you can see Mike and Maggie
installing uh the legs here and the legs
are pounded into the bottom uh they can
be a fixed Tighter and then there's leg
levelers to be honest with you we did
not use the leg levelers other than
installing them hard to the bottom
because on the gravel floor in the
greenhouse here we put it on a couple of
leg or uh 2x4
trestles uh to raise it up off the floor
a little bit keep it more stable and
then what we did is we leveled The
Trestle
instead of the individual legs and that
worked really well when we leveled it
all we actually put a level on it
because we didn't want water running to
one side or the back of the bowls uh
that's uh I strongly recommend that when
you set this up okay and now it's time
to install the drain system below you've
got connections to both of the bowl
Outlets uh kind of a wide Y type of
thing with a central drop uh if this is
being installed in your home uh then it
would go straight into a P trap and that
sort of thing this is actually uh going
in a pipe that goes outside the
greenhouse runs slopes downhill and runs
to Daylight uh and the water with a lot
of the things when we wash pots and
things and uh cell packs out uh and
recycle them back in or just cleaning up
things all of that grit and dirt which
is organic material makes its way to the
end and is recaptured down the end in a
nice little area out there so uh nothing
goes to waste in that regard so uh but
there is no P trap because we're not
trying to stop sewer gases from coming
back up so we install that and here uh
you can see Mike using where you can see
on the Shelf I got this at Home Depot
this is uh actually jacuzzi connection
hose and I'm not a Jacuzzi owner but I
believe this is the hose that's used to
either uh deliver water to the Jets or
is a drain AG or air siphon hose or
whatever it's a reinforced semi stiff
hose but it allows us to connect it to
the outlet at the bottom of uh the drain
system and then to feed it in uh to the
tubes that we've got to run to outdoor
to daylight so you can just use that
snake that in gives you a little bit of
flex so you don't have to be precise and
where the pipe goes to so that's the
next thing you do now once that is done
we flip uh NE next thing we need to do
then was to put the central connector
here uh that connects the two bowls
together here you can see mik snapping
that into place that reinforces it on
the top the bottom plates down below are
holding the bottom edges and now you
have a pretty rigid construction
surprisingly so I found so once those uh
connectors are in then uh you can go ahe
and start snapping in the hole fillers
that they provide uh for the unused
holes however one of the holes uh even
though you see Mike Filling them all in
at my direction uh in reality over here
uh in the right we needed to leave one
of these open to put uh the side spray
in so that's the next thing that's done
and then we're going to go ahead and put
the faucet install and this is where it
gets a little complex but not really bad
what you're essentially doing is
adapting from let's work from the hose
bit side you're going to put a garden
hose towards the sink then you're going
to connect it to a Y
adapter uh that is a Y connector or
mixer uh and then that's going to go up
one side is going to go to an adapter
that goes from hose thread to pipe
thread or known as MP3 MPT thread which
is on the stem of um the faucet on the
other side we need to put in an adapter
that allows us to go from hose end to
pipe thread but then into a t and then
connected up to the other side of the
stem on the faucet now you have an open
te that needs to be adapted down to/ qu
inch and a little nipple is put in there
and now the side spray uh reinforced
hose is screwed onto that and then
connected in the spray head base is put
in right over here and now you have uh
everything ready to go once you connect
it to your outside hose and pressurize
it you should be able to check all your
connections make sure you don't have any
leaks and as you can see this is sitting
on all the time but the faucet isn't
running until I turn on either side
there's no hot and cold they're both
cold because of the Y adapter and then
over here this is sitting here ready at
all times to be used which is really
handy right off of camera right over in
this area here how do you like that
little refrigerator we have there um but
uh over right outside of frame there is
where we actually uh mix our potting mix
and fill trays and uh it is really handy
to be able to take this and aim it over
there and fill that put it right in uh
there to keep things moist and mix it
all up so this is very very handy it
works out really well
well this is the finished product you
can see Mike and Maggie stand there on
both sides it after they put it all
together we really like this setup now
if you're interested in um seeing about
how to do the single one check out uh
the link uh that's appearing right above
you can also go down to the description
below it's down there and uh you can
also look at the end panel that takes
you to the other syn video in case you
want to go with a smaller unit parts
lists are there for Home Depot which you
should be able to find them for other
major retailers such as Ace Hardware uh
Menards or Lowe's anyone like that uh
just by the parts descriptions we really
really like this and it's a big thumbs
up for the price point and for uh all
the workers that are in here in the
greenhouse that come in and work with us
really love this we we know you're going
to love it too well if you're into
gardening here's another great thing you
should know about and that's your
DIY irrigation system for small food
plots things like corn or field crops
take a look at this video where we show
you how to use PVC and commonly
available pipe fittings to make your own
grip system that puts the water exactly
where you need it and while you're at it
check out this other video that YouTube
thinks is perfect for you from our
catalog we think you're going to like it
too until the next time this is dirt
farmer J from dirt farmer J enjoy a
great sink
[Music]
