How to make a gourd water bottle canteen

The Skill Tutor
20 followers
19 Video Views·Oct 30, 2022
That's one proud gourd right there. Hello everyone and welcome. The other day when I was on the web
I saw a picture for a gourd water bottle, clicked on the link, and kind of followed it down its
rabbit hole to a website that was selling these gourd water bottle, canteen, water containers,
whatever you want to call them, and they were selling them for $60 a piece.
And obviously people were buying these or else they wouldn't be a regular item on their website
and I was amazed by this because this box of gourds has probably 100-120 gourds in it
and each one of these gourds contain viable seeds and there's probably a million plus seeds
in this box and this one box of gourds literally cost me nothing but my own time. I got the seeds
for free. Growing them didn't cost me nothing. Harvesting them didn't cost me nothing and even
drying them doesn't cost me anything because you just hang them up in your rafters and let them dry
during the hot months as you harvest them. The only expense I can find in making a gourd water
bottle is if you had to buy paraffin wax because you didn't have any beeswax. So that's what I'm
going to do today. I'm going to show you how to make a $60 gourd water bottle for just about
nothing. In picking out your gourds there are various shapes and sizes. A lot of people like
to use gourds that look like this to decorate, make like a swan, birds, things like that.
Little Santa Claus is out of these and even this one right here where the top is broken off is
useful. You can make you a little flower pot out of or something but as you can see there's still
seeds inside of it and every one of these seeds is viable. When picking out your gourd I like to
use a gourd with a flat bottom so that it'll sit down on its own and when I'm picking it out give
everything a good squeeze. See how that one just broke through? That means that it's no good and
like I said look at all the seeds that are inside of this. I'm going to set this one off the side
so I can put the seeds up. So my next candidate will be this one. It's got a nice flat bottom on
it so that it'll sit upright on its own and applying pressure to it it doesn't feel like
it's going to break through anywhere. This is about the right size as opposed to a big old
giant one like this. I think it's going to be too big. So now that we have our candidate let's get
started. The first thing I'm going to do is clean up the outside of my gourd before I breach it in
anyway. Because I'm going to be applying a lot of pressure to the outside of it I don't want to
crack the mouth of it. I'm going to start off with an aggressive grit sandpaper and then finish off
with about a 220 grit. Now that we have our gourd sanded on the outside and it's roughed up we can
decide what type of finish we want to put on the outside. They usually use wax on the outside of
these but you can also varnish them. You can use leather dye you know a dye made from coffee grounds
and then go over with some wax. It's just however you want to do it. I decided I'm going to go with
a wax finish on the outside of this. So I'm going to go ahead and open this up for my cork and this
will give me an access hole to clean out the inside of it. And to do that I'm just going to
use my multi-tool. First I'm going to cut the stem off of it. Now I'm just going to take the cork that I
decided I'm going to use for this and kind of scribe a little line around it and that's what
I'm going to use to cut out the hole. That'll work and I'm just going to start kind of twisting my
knife into it. As you can see the inside top portion of this gourd is pretty thick. With my
starter hole finished I'm just going to whittle out to the line that I drew around the outside of it.
And you can use a drill bit to do this. I'm just using my multi-tool because I'm trying to show
that you know this is something that can be done kind of in the field. All right it's time for a
little test fit see how it goes. And it's getting there. I may need to widen it out just a little
bit more because I'm going to put wax in here to help seal it up. And as you can see the inside
is still pretty rough so that wax will help smooth it out some. Now it's time to clean it out.
To clean it out I'm just going to use my coat hanger and I'm going to take and crimp down this
bend a little bit to fit in that hole. So here are all the seeds that came out of that gourd
and there's a little bit of chaff in here but it's not going to hurt anything and like I said
I'm going to put these up as is. And here is our now cleaned out on the inside gourd.
We're ready to apply wax to the outside of it and the inside of it. To melt my wax I'm just
going to use my little Weber grill but not like you think. As you can see I'm barbecuing some
chicken and paraffin wax is highly flammable. So what I'm going to do is I'm going to take and put
a bowl on top of it and then put my wax in there and let it melt. So I'm ready to pour my wax into
my gourd now and make sure that you're wearing gloves because both the gourd and probably the
container that you're using to put the wax in the gourd is going to be hot. I'm going to take and
pour it in there. I'm going to put my top on and I'm just going to slush it around in there and
get me a good seal all the way around and then pour the rest back in the container. Now I'm just
going to take the mouth of it and dip it in the wax. As you can see we're getting to the point
now where it's not leaking. Now I'm just going to take and dip it in this little bowl and kind of
smear it around. Now I'm just going to take and insert this top into the bowl of wax. All right
so here's our gourd water bottle filled with water. As you can see it's sealed up pretty good.
To finish off my gourd I'm just going to make me a lanyard out of this cordage that I made from the
big coffee bean sacks that come in from other countries. I took some of the threads or burlap
or whatever you want to call it out of it and then Flemish twisted it together to make this
cordage. And if you want to know how to do like a Flemish twist type cord I have one posted.
It's actually from a yucca plant and I also use this as well. So I'm just going to find about the
center of my cord and then give it a couple of twists like that and then wrap them backwards.
And then once I've gone around two or three times I'm just going to tie them in a knot.
So here is our gourd water bottle and lanyard and this literally cost me a half a box of
paraffin wax which I normally keep on hand anyway. So and that's a far cry from the
$60 that they're trying to sucker you out of on the web.
So thank y'all for watching we'll see y'all next time.
