If you're stuck choosing between the Libman Tornado Spin Mop and the O‑Cedar EasyWring Spin Mop, this video is for you! #SpinMop#OCedar#Libman#EasyWring#MopReview#CleaningTools#HomeCleaning#LibmanTornado#FootPedalMop#PushDownMop#DirtFarmerJay Spin Mops have become very popular as an alternative to hand-wringing a dirty mop or using a traditional janitorial-style mop wringer. These products are smaller and lighter, featuring a swing-away top handle that allows for quick placement exactly where you want the mop bucket to be. The spin action “wrings” out the water by centrifugal force. This method is fast and convenient, and the bucket capacity and associated weight are not excessive, so the load is not too heavy. We have a mop sink installed in both our laundry room and mudroom, making it easy to fill and empty the tubs. If you don’t have a mop sink, then the bathtub is a great alternative. We put these two popular mop systems to the test and compared them: ✅ Wringing mechanisms: push-down vs. foot pedal ✅ Mop head shape: round vs. triangular ✅ Corner and edge cleaning effectiveness ✅ Build quality, ease of use, and storage ✅ Absorbency and performance on tile, wood, and laminate ✅ Value for the price Both products are similar in price, ranging from $45. The triangular shape of the O-Cedar mop enables it to reach into corners more effectively, and it features a higher fiber content, which holds more water or cleaning solution. The downside is that it is heavier. The Libman Tornado® is lighter and has a round mop head. It’s easier to move around and is excellent for smaller areas. We prefer the Libman push-down action over the O-Cedar foot pedal - that’s simply our preference. Both methods work well.
Like, Subscribe & Tap the Bell for more tool and gear reviews, DIY and homeowner skills from DirtFarmerJay!
JUST DO IT YOURSELF!
Hey, Dirt Farmer Jay here from
dirtfrj.com.
Welcome to the spin mop showdown. We're
going to compare Libman's Tornado from
Oedar's Easy Ring system. They're both
the spin mop types, which are really
nice, but there's different features.
Which one's the winner? Stay tuned.
[Music]
Hey, Dirt Farmer J from dirt
farmerj.com.
Spin mops have become very very popular
because instead of ringing out a dirty
mop with your hands, you're able to use
a reservoir of water and then put it
into a spin device and by centrifugal
force spin the water, the dirty water
out and keep your hands out of it. It's
fast, it's convenient, portable, and it
gets you to mopping and the job done a
lot faster. But there's some differences
between two of the main contenders that
we've seen out in the retail market.
This is the Libman Tornado and this is
the Ocear Easy Ring system. Well, let's
take a look at each one. And let's start
with the Libman and some of the features
it has. All right, here's the Libman
unit. It's easily recognizable with its
brilliant green color. And this is the
stow position. So, I'm taking the mop.
I'm putting down here. and you're
thinking, "Boy, that's a short mop.
That's hard on the the back." Well, it
would be if that's the actual length
you're going to use it at. What you're
going to do is pull that lever, let it
come back out, and then clip it back.
And now that is the working length right
there. Very comfortable for me. Uh the
head is very sizable, etc. So, that's
the storage and deployment of it. All
right. Now, to use the spin feature, we
make sure the lever's up. That allows us
to spin. And then we're just going to
sit there and spin this like that.
And you just stay right up at the top
here. You don't have to bend over or
anything like that. And then this is
the way it dries it out. And if you
notice, there's a pivot that's a two-way
pivot that allows me, notice the handle
still, but the head can go this way,
that way, this way, that way. So, in
practical use on the floor, I can change
angles. I can go around and you can
cover a lot of floor very quickly. And
as you can see, because it's a fairly
dry mop, I don't have a lot of surface
moisture. The floor is going to dry very
quickly. And then, of course, I can go
right back here, pick this up,
put it in here, and spin it again.
Let's go ahead and look at the bucket,
the spin u mechanism and the carrying
handle of how this is all put together.
So, first of all, notice that the
carrying handle goes from the narrow end
to the narrow end. So, the center of
gravity is very nice. The handle feels
very substantial, feels comfortable in
the grip. Uh notice that if I put it
here, you know, about right there in the
center of the handle, the center of
gravity is not bad. And to pour out
dirty water, I would simply tip it here
and use that opening right there. As far
as the spin mechanism, the receptacle
where the mop head goes, it's
freewheeling. So, it's almost like a
roulette table there. It just spins
freely and the spin action is generated
by the helix on the handle. So,
everything there looks very well.
Another thing I really like is some
clear markings inside that are easy to
read that tell you the capacity that
you're filled to and the max line
because if you overfill it, water is
going to be actually submerging the
bottom of the spin area and therefore
the mop will not get dry when you spin
it out. So that is handy to know. And
one other reason you'd want to know the
quantity of water you put in there is if
you're using cleaning solutions that
give you a dilution rate, you know, a
cup per gallon or whatever, then that is
all there for you. So, this has been
very handy. I like also that it's very
clean. It's easy to see. Now, there's
something else I would mention though.
This plastic is a little
rigid. And to be honest with you, this
is the second one we've had. We ended up
hitting that corner or maybe it came to
us this way where there was a split
right there on that mold corner there
and we'd get a drool of moisture out in
the floor when we were mopping. Couldn't
figure out where it was. Finally located
it. I probably could have put a swipe of
silicone uh uh caulk in the inside, but
I simply called Libman and one was back
to us in a couple days. No cost. happy
to replace it. Uh, and so overall, this
is a pretty good system. This is runs in
the mid40s, uh, at the time of filming.
All right, let's now take a look at the
Ocear model. All right, the Oedar uh,
easy ring system. The first thing you'll
notice that its handle has a snap area
that you can put the handle and it'll
sit there uh, a little bit more neatly
stowed than the Libman Tornado system
does. So, that's a nice setup. The other
thing is though, the handle orientation
is different. So on the Libman, the
handle is connected at the ends the long
way, whereas on the OER, they're
sideways. Well, does that matter? Well,
maybe. So, uh, first of all, it's not as
comfortable. And secondly, if I pull
this out, even with water in it, the
center of gravity is kind of weird on
this. Uh, if you get more water and it's
okay, but it always tends to want to
lean back this way. As far as pouring
out dirty water, you do that by tipping
it this way and using the front part of
the reservoir here. The sides and the
construction is more flexible than the
Libman and probably more durable in the
sense that it'll give a little bit and
is not as brittle. Um, so that is all in
its favor. However, the spin on this is
generated in a totally different way.
So, what I'm going to do is let that
fall. I'm going to put this in the spin
device. And there is nothing on the
handle. The handle is a fixed length. It
is what it is. It's ready to go. Uh,
this is a one-way ratchet type of thing.
I can't go that way, but I can turn
counterclockwise. But to generate a
spin, I'm gonna step on this pedal and
keep my hand in a loose loop around the
top of the handle. And then I'm gonna
just step on that
till I get enough of that that now I
have
that head like this. Now, you'll
probably notice, and we'll actually show
you a shot of the head side by side, but
this one's smaller. It's a little bit
lighter and it's triangular in shape,
meaning that it's probably easier to get
in corners, around corners, or back in a
corner. So, this is fairly light. Um,
the head swivels forward like this, but
does not go side to side, whereas the
other one swivels, articulates in
different ways. But, you know, you get
used with muscle memory of how to
utilize the mop. So, here we go again.
You can see it's doing a pretty much of
a dry mop. When it comes time, we're
going to put it back in the solution and
then we'll generate the spin by stepping
on the pedal.
And there you go. You have the mop. Now,
as far as measurement markings inside,
we found because of the color of the
material and the way they did the
embossing, it's very difficult to read
the maximum fill line, but you'll
develop knowing that you don't want to
fill beyond the bottom of the spin tub.
Uh, and that the measurement lines are
hard to see as well, but they're there.
Uh, but not nearly as marked as well
marked as the Libman. All right. So, who
won the spin mop showdown? Well, we
believe the Libman came out on top for a
couple of reasons. One, we like the
capacity of the head. Number two, we
like the balance of the tub and that the
handle is very comfortable and it makes
it easier to pour the reservoir out the
end. The superior markings on the
containers also put another point in its
favor. And lastly, we really like the
spin mechanism on the Libman versus the
foot pedal on the Oater. If you buy the
Oater, are you going to be mad and ultra
disappointed? No. I'm just saying that
this had more features that we found to
be desirable. Well, in a perfect world,
if these two had a baby and they ended
up with all the best features of each,
that'd be a real win. In the meanwhile,
then we need to make a decision of which
one gives us the features that we like
the most. And in our case, we think it's
the Libman. If you'd like to check out
where you can get them, they're down in
the description below. We don't make any
commission or anything on those. We just
send you the information, and you can
find these at many different retailers,
uh, at your favorite brickandmortar
retailer or online, either one. Now,
here's another product that we think you
ought to really know about for around
the household. Check out this video
where we showed the effectiveness of a
timeless product that's a cleaner called
Barkeeper's Friend. There's quite a
story behind it and it is a wonderful
cleaner for a variety of tough cleaning
jobs. Check it out. We know you'll like
what you see. And also check out this
other video that YouTube has chosen for
you and thinks you will like and we
think you'll enjoy it as well. Until the
next time, this is Dirt Farmer Jay
getting ready to go do some household
janitorial work.