785. Trimming/Fitting a set of 3 Noodle Bowls with Hsin-Chuen Lin 林新春 麵碗組修坯示範

Hsinchuen Lin
205 followers
3 Video Views·Mar 4, 2024
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more information, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Like me on Facebook page: Hsin-Chuen Lin Ceramics
uh I show you how to use this measuring
tool for turn it into as a tumble stick
and now I want to show you the second
function of uh this tool is to check the
thickness of the botton so let me remove
the
oring slide it
off okay put the oring aside and then
using the three
pieces if you have the three pieces it's
easier if you don't you can use uh two
pieces and also here is the set of two
of the three bowls that I will show you
in my previous
video let me put this
aside and show you how this tool is
working this one is
horizontal and you put it right across
the rim of the ball and
then put it right
here one another one on the outside so
there's a reading there and for the one
on the inside is around 86 and the one
on the outside is around 100 okay so
186 so I got the um exact thickness of
the base is 14 mm okay 14 10
mm so that is how this tool is
working and uh you know exactly how
thick the B is so you could the reserve
whatever the thck you want in my on case
I usually leave the base around 4 mm so
meaning that I could trim down 10 mm
okay 10 millimet okay so let's start to
trim the first one and then I'm going to
use the first one
um The Rim that I told you that the rim
is the same width and the same depth so
if you want to make a set measure the
depth and the width the depth and the
width so you will have a set and the
slightly a little bit uneven the height
on the height and you can just remove
more clay from here remove more clear
from
here and that's how I will show you how
I
do first let me brush some water on the
room and if you don't know how to tap
Center in how to tap Center your piece
and this B my translucent bed can do the
job a little bit easier I guess uh the
Gap okay the little guideline here is
closer so you can see that if the the
line is is following the line is closer
to whatever the
circle and let's check
it okay it's pretty much good slightly
off and I can see that this side is
slightly off and I
can okay so that's how I judge by
looking the the gap of the rim but uh of
course your bow has to be throwing very
very good without being wobble or being
deformed it has to be a perfect circle
otherwise it's very hard to find the
center um you can just use water and by
using this method you can stick your bow
on the bed without adding any holding
clay
here
right before I go further I like to see
if that is the right thickness so bring
back my measuring tool on check it and
now it's about seven so meaning I have
three more to
go right so it's 10 I will stop right
here and if you are good at but just by
hearing the sound when you knock
it okay so that is the sound you might
want to remember so next time you don't
need to depending on the measuring to
and by just knocking and you you know
when to
stop
for
e
[Music]
right bring back my second one I you can
see that there's a
slightly higher for the second one so
when I'm trimming I can cut down the
foot ring slightly so they will be the
same height so let me put this aside and
then trim the second
one so the first one I was using my
Square Loop 2 and now the second one I
am going to use this seven
shape
so let me bring the the ball that I trim
and put it on top of it and to see how
much more I could uh trim the
Forin all
right all right so that's pretty good
the same
size
[Music]
right as you can see that I do my final
trimming using the uh regular standless
Steel Two because the corner is much
nicer so you can take care of the inner
part much easier and also the outer part
here much easier so that's why usually I
have my rectangle or you call number two
triming tools either uh 420 standless or
3 301 standless to or even the car by to
that that's a nice 90 degrees so that I
can take care of the corner a little bit
better and also for the standard to you
can when you trim actually there there's
also it's like a burnish effect you can
use that tool to slightly burnish the
surface so the surface will be much
smoother compared with the ton car by
TOS before I do my final and I like to
check to see if this is a right
size
and let's check to see if that they are
the same
height okay very close to the same
height so see that I have a set of two
bowls that are very similar to the shape
and also the size and I can keep on
triming my third one so I will show you
the uh result for the whole set of three
bows
for
all right so that is the
try to get the same uh diameter of the
foot
rings so this is the finished three bows
noodle bows using the tumble stick to
measure the depth and the width and then
after that when I'm trimming using this
to check the thickness of the bottom and
the that they are the same height and
the same
foot so that is the way that I'm making
a set of repeat things a set of B SE
buxs okay thanks for watching and see
you next
[Music]
time
[Music]
[Music]
